4 * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
5 * deal of code from the sparc and intel versions.
7 * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
11 #include <linux/config.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/sched.h>
15 #include <linux/smp.h>
16 #include <linux/smp_lock.h>
17 #include <linux/interrupt.h>
18 #include <linux/kernel_stat.h>
19 #include <linux/delay.h>
20 #include <linux/init.h>
21 #include <linux/spinlock.h>
22 #include <linux/cache.h>
24 #include <asm/ptrace.h>
25 #include <asm/atomic.h>
28 #include <asm/pgtable.h>
32 #include <asm/residual.h>
34 #include <asm/thread_info.h>
35 #include <asm/tlbflush.h>
38 volatile int smp_commenced
;
39 int smp_tb_synchronized
;
40 struct cpuinfo_PPC cpu_data
[NR_CPUS
];
41 struct klock_info_struct klock_info
= { KLOCK_CLEAR
, 0 };
44 cpumask_t cpu_online_map
;
45 cpumask_t cpu_possible_map
;
46 int smp_hw_index
[NR_CPUS
];
47 struct thread_info
*secondary_ti
;
48 static struct task_struct
*idle_tasks
[NR_CPUS
];
50 EXPORT_SYMBOL(cpu_online_map
);
51 EXPORT_SYMBOL(cpu_possible_map
);
53 /* SMP operations for this machine */
54 static struct smp_ops_t
*smp_ops
;
56 /* all cpu mappings are 1-1 -- Cort */
57 volatile unsigned long cpu_callin_map
[NR_CPUS
];
59 int start_secondary(void *);
60 void smp_call_function_interrupt(void);
61 static int __smp_call_function(void (*func
) (void *info
), void *info
,
62 int wait
, int target
);
64 /* Low level assembly function used to backup CPU 0 state */
65 extern void __save_cpu_setup(void);
67 /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
69 * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
70 * in /proc/interrupts will be wrong!!! --Troy */
71 #define PPC_MSG_CALL_FUNCTION 0
72 #define PPC_MSG_RESCHEDULE 1
73 #define PPC_MSG_INVALIDATE_TLB 2
74 #define PPC_MSG_XMON_BREAK 3
77 smp_message_pass(int target
, int msg
, unsigned long data
, int wait
)
80 atomic_inc(&ipi_sent
);
81 smp_ops
->message_pass(target
,msg
,data
,wait
);
88 void smp_message_recv(int msg
, struct pt_regs
*regs
)
90 atomic_inc(&ipi_recv
);
93 case PPC_MSG_CALL_FUNCTION
:
94 smp_call_function_interrupt();
96 case PPC_MSG_RESCHEDULE
:
99 case PPC_MSG_INVALIDATE_TLB
:
103 case PPC_MSG_XMON_BREAK
:
106 #endif /* CONFIG_XMON */
108 printk("SMP %d: smp_message_recv(): unknown msg %d\n",
109 smp_processor_id(), msg
);
115 * 750's don't broadcast tlb invalidates so
116 * we have to emulate that behavior.
119 void smp_send_tlb_invalidate(int cpu
)
121 if ( PVR_VER(mfspr(SPRN_PVR
)) == 8 )
122 smp_message_pass(MSG_ALL_BUT_SELF
, PPC_MSG_INVALIDATE_TLB
, 0, 0);
125 void smp_send_reschedule(int cpu
)
128 * This is only used if `cpu' is running an idle task,
129 * so it will reschedule itself anyway...
131 * This isn't the case anymore since the other CPU could be
132 * sleeping and won't reschedule until the next interrupt (such
136 /* This is only used if `cpu' is running an idle task,
137 so it will reschedule itself anyway... */
138 smp_message_pass(cpu
, PPC_MSG_RESCHEDULE
, 0, 0);
142 void smp_send_xmon_break(int cpu
)
144 smp_message_pass(cpu
, PPC_MSG_XMON_BREAK
, 0, 0);
146 #endif /* CONFIG_XMON */
148 static void stop_this_cpu(void *dummy
)
155 void smp_send_stop(void)
157 smp_call_function(stop_this_cpu
, NULL
, 1, 0);
161 * Structure and data for smp_call_function(). This is designed to minimise
162 * static memory requirements. It also looks cleaner.
163 * Stolen from the i386 version.
165 static DEFINE_SPINLOCK(call_lock
);
167 static struct call_data_struct
{
168 void (*func
) (void *info
);
176 * this function sends a 'generic call function' IPI to all other CPUs
180 int smp_call_function(void (*func
) (void *info
), void *info
, int nonatomic
,
183 * [SUMMARY] Run a function on all other CPUs.
184 * <func> The function to run. This must be fast and non-blocking.
185 * <info> An arbitrary pointer to pass to the function.
186 * <nonatomic> currently unused.
187 * <wait> If true, wait (atomically) until function has completed on other CPUs.
188 * [RETURNS] 0 on success, else a negative status code. Does not return until
189 * remote CPUs are nearly ready to execute <<func>> or are or have executed.
191 * You must not call this function with disabled interrupts or from a
192 * hardware interrupt handler or from a bottom half handler.
195 /* FIXME: get cpu lock with hotplug cpus, or change this to
197 if (num_online_cpus() <= 1)
199 /* Can deadlock when called with interrupts disabled */
200 WARN_ON(irqs_disabled());
201 return __smp_call_function(func
, info
, wait
, MSG_ALL_BUT_SELF
);
204 static int __smp_call_function(void (*func
) (void *info
), void *info
,
205 int wait
, int target
)
207 struct call_data_struct data
;
212 if (target
== MSG_ALL_BUT_SELF
)
213 ncpus
= num_online_cpus() - 1;
214 else if (target
== MSG_ALL
)
215 ncpus
= num_online_cpus();
219 atomic_set(&data
.started
, 0);
222 atomic_set(&data
.finished
, 0);
224 spin_lock(&call_lock
);
226 /* Send a message to all other CPUs and wait for them to respond */
227 smp_message_pass(target
, PPC_MSG_CALL_FUNCTION
, 0, 0);
229 /* Wait for response */
231 while (atomic_read(&data
.started
) != ncpus
) {
232 if (--timeout
== 0) {
233 printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
234 smp_processor_id(), atomic_read(&data
.started
));
243 while (atomic_read(&data
.finished
) != ncpus
) {
244 if (--timeout
== 0) {
245 printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
246 smp_processor_id(), atomic_read(&data
.finished
), atomic_read(&data
.started
));
256 spin_unlock(&call_lock
);
260 void smp_call_function_interrupt(void)
262 void (*func
) (void *info
) = call_data
->func
;
263 void *info
= call_data
->info
;
264 int wait
= call_data
->wait
;
267 * Notify initiating CPU that I've grabbed the data and am
268 * about to execute the function
270 atomic_inc(&call_data
->started
);
272 * At this point the info structure may be out of scope unless wait==1
276 atomic_inc(&call_data
->finished
);
279 static void __devinit
smp_store_cpu_info(int id
)
281 struct cpuinfo_PPC
*c
= &cpu_data
[id
];
283 /* assume bogomips are same for everything */
284 c
->loops_per_jiffy
= loops_per_jiffy
;
285 c
->pvr
= mfspr(SPRN_PVR
);
288 void __init
smp_prepare_cpus(unsigned int max_cpus
)
290 int num_cpus
, i
, cpu
;
291 struct task_struct
*p
;
294 smp_store_cpu_info(smp_processor_id());
295 cpu_callin_map
[smp_processor_id()] = 1;
297 smp_ops
= ppc_md
.smp_ops
;
298 if (smp_ops
== NULL
) {
299 printk("SMP not supported on this machine.\n");
303 /* Probe platform for CPUs: always linear. */
304 num_cpus
= smp_ops
->probe();
305 for (i
= 0; i
< num_cpus
; ++i
)
306 cpu_set(i
, cpu_possible_map
);
308 /* Backup CPU 0 state */
311 if (smp_ops
->space_timers
)
312 smp_ops
->space_timers(num_cpus
);
315 if (cpu
== smp_processor_id())
317 /* create a process for the processor */
320 panic("failed fork for CPU %u: %li", cpu
, PTR_ERR(p
));
321 p
->thread_info
->cpu
= cpu
;
326 void __devinit
smp_prepare_boot_cpu(void)
328 cpu_set(smp_processor_id(), cpu_online_map
);
329 cpu_set(smp_processor_id(), cpu_possible_map
);
332 int __init
setup_profiling_timer(unsigned int multiplier
)
337 /* Processor coming up starts here */
338 int __devinit
start_secondary(void *unused
)
342 atomic_inc(&init_mm
.mm_count
);
343 current
->active_mm
= &init_mm
;
345 cpu
= smp_processor_id();
346 smp_store_cpu_info(cpu
);
347 set_dec(tb_ticks_per_jiffy
);
348 cpu_callin_map
[cpu
] = 1;
350 printk("CPU %d done callin...\n", cpu
);
351 smp_ops
->setup_cpu(cpu
);
352 printk("CPU %d done setup...\n", cpu
);
353 smp_ops
->take_timebase();
354 printk("CPU %d done timebase take...\n", cpu
);
356 spin_lock(&call_lock
);
357 cpu_set(cpu
, cpu_online_map
);
358 spin_unlock(&call_lock
);
366 int __cpu_up(unsigned int cpu
)
371 secondary_ti
= idle_tasks
[cpu
]->thread_info
;
375 * There was a cache flush loop here to flush the cache
376 * to memory for the first 8MB of RAM. The cache flush
377 * has been pushed into the kick_cpu function for those
378 * platforms that need it.
382 smp_ops
->kick_cpu(cpu
);
385 * wait to see if the cpu made a callin (is actually up).
386 * use this value that I found through experimentation.
389 for (c
= 1000; c
&& !cpu_callin_map
[cpu
]; c
--)
392 if (!cpu_callin_map
[cpu
]) {
393 sprintf(buf
, "didn't find cpu %u", cpu
);
394 if (ppc_md
.progress
) ppc_md
.progress(buf
, 0x360+cpu
);
395 printk("Processor %u is stuck.\n", cpu
);
399 sprintf(buf
, "found cpu %u", cpu
);
400 if (ppc_md
.progress
) ppc_md
.progress(buf
, 0x350+cpu
);
401 printk("Processor %d found.\n", cpu
);
403 smp_ops
->give_timebase();
405 /* Wait until cpu puts itself in the online map */
406 while (!cpu_online(cpu
))
412 void smp_cpus_done(unsigned int max_cpus
)
414 smp_ops
->setup_cpu(0);