2 * Support for Sharp SL-C6000x PDAs
5 * Copyright (c) 2005 Dirk Opfer
7 * Based on code written by Sharp/Lineo for 2.4 kernels
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
20 #include <linux/interrupt.h>
21 #include <linux/mmc/host.h>
23 #include <asm/setup.h>
24 #include <asm/memory.h>
25 #include <asm/mach-types.h>
26 #include <asm/hardware.h>
28 #include <asm/arch/irda.h>
29 #include <asm/arch/mmc.h>
30 #include <asm/arch/udc.h>
32 #include <asm/mach/arch.h>
33 #include <asm/mach/map.h>
34 #include <asm/mach/irq.h>
36 #include <asm/arch/pxa-regs.h>
37 #include <asm/arch/irq.h>
38 #include <asm/arch/tosa.h>
40 #include <asm/hardware/scoop.h>
41 #include <asm/mach/sharpsl_param.h>
49 static struct resource tosa_scoop_resources
[] = {
51 .start
= TOSA_CF_PHYS
,
52 .end
= TOSA_CF_PHYS
+ 0xfff,
53 .flags
= IORESOURCE_MEM
,
57 static struct scoop_config tosa_scoop_setup
= {
58 .io_dir
= TOSA_SCOOP_IO_DIR
,
59 .io_out
= TOSA_SCOOP_IO_OUT
,
63 struct platform_device tosascoop_device
= {
64 .name
= "sharp-scoop",
67 .platform_data
= &tosa_scoop_setup
,
69 .num_resources
= ARRAY_SIZE(tosa_scoop_resources
),
70 .resource
= tosa_scoop_resources
,
77 static struct resource tosa_scoop_jc_resources
[] = {
79 .start
= TOSA_SCOOP_PHYS
+ 0x40,
80 .end
= TOSA_SCOOP_PHYS
+ 0xfff,
81 .flags
= IORESOURCE_MEM
,
85 static struct scoop_config tosa_scoop_jc_setup
= {
86 .io_dir
= TOSA_SCOOP_JC_IO_DIR
,
87 .io_out
= TOSA_SCOOP_JC_IO_OUT
,
90 struct platform_device tosascoop_jc_device
= {
91 .name
= "sharp-scoop",
94 .platform_data
= &tosa_scoop_jc_setup
,
95 .parent
= &tosascoop_device
.dev
,
97 .num_resources
= ARRAY_SIZE(tosa_scoop_jc_resources
),
98 .resource
= tosa_scoop_jc_resources
,
104 static struct scoop_pcmcia_dev tosa_pcmcia_scoop
[] = {
106 .dev
= &tosascoop_device
.dev
,
107 .irq
= TOSA_IRQ_GPIO_CF_IRQ
,
108 .cd_irq
= TOSA_IRQ_GPIO_CF_CD
,
109 .cd_irq_str
= "PCMCIA0 CD",
111 .dev
= &tosascoop_jc_device
.dev
,
112 .irq
= TOSA_IRQ_GPIO_JC_CF_IRQ
,
117 static void tosa_pcmcia_init(void)
119 /* Setup default state of GPIO outputs
120 before we enable them as outputs. */
121 GPSR(GPIO48_nPOE
) = GPIO_bit(GPIO48_nPOE
) |
122 GPIO_bit(GPIO49_nPWE
) | GPIO_bit(GPIO50_nPIOR
) |
123 GPIO_bit(GPIO51_nPIOW
) | GPIO_bit(GPIO52_nPCE_1
) |
124 GPIO_bit(GPIO53_nPCE_2
);
126 pxa_gpio_mode(GPIO48_nPOE_MD
);
127 pxa_gpio_mode(GPIO49_nPWE_MD
);
128 pxa_gpio_mode(GPIO50_nPIOR_MD
);
129 pxa_gpio_mode(GPIO51_nPIOW_MD
);
130 pxa_gpio_mode(GPIO55_nPREG_MD
);
131 pxa_gpio_mode(GPIO56_nPWAIT_MD
);
132 pxa_gpio_mode(GPIO57_nIOIS16_MD
);
133 pxa_gpio_mode(GPIO52_nPCE_1_MD
);
134 pxa_gpio_mode(GPIO53_nPCE_2_MD
);
135 pxa_gpio_mode(GPIO54_pSKTSEL_MD
);
138 static struct scoop_pcmcia_config tosa_pcmcia_config
= {
139 .devs
= &tosa_pcmcia_scoop
[0],
141 .pcmcia_init
= tosa_pcmcia_init
,
145 * USB Device Controller
147 static void tosa_udc_command(int cmd
)
150 case PXA2XX_UDC_CMD_CONNECT
:
151 set_scoop_gpio(&tosascoop_jc_device
.dev
,TOSA_SCOOP_JC_USB_PULLUP
);
153 case PXA2XX_UDC_CMD_DISCONNECT
:
154 reset_scoop_gpio(&tosascoop_jc_device
.dev
,TOSA_SCOOP_JC_USB_PULLUP
);
159 static int tosa_udc_is_connected(void)
161 return ((GPLR(TOSA_GPIO_USB_IN
) & GPIO_bit(TOSA_GPIO_USB_IN
)) == 0);
165 static struct pxa2xx_udc_mach_info udc_info __initdata
= {
166 .udc_command
= tosa_udc_command
,
167 .udc_is_connected
= tosa_udc_is_connected
,
173 static struct pxamci_platform_data tosa_mci_platform_data
;
175 static int tosa_mci_init(struct device
*dev
, irqreturn_t (*tosa_detect_int
)(int, void *, struct pt_regs
*), void *data
)
179 /* setup GPIO for PXA25x MMC controller */
180 pxa_gpio_mode(GPIO6_MMCCLK_MD
);
181 pxa_gpio_mode(GPIO8_MMCCS0_MD
);
182 pxa_gpio_mode(TOSA_GPIO_nSD_DETECT
| GPIO_IN
);
184 tosa_mci_platform_data
.detect_delay
= msecs_to_jiffies(250);
186 err
= request_irq(TOSA_IRQ_GPIO_nSD_DETECT
, tosa_detect_int
, SA_INTERRUPT
,
187 "MMC/SD card detect", data
);
189 printk(KERN_ERR
"tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
193 set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT
, IRQT_BOTHEDGE
);
198 static void tosa_mci_setpower(struct device
*dev
, unsigned int vdd
)
200 struct pxamci_platform_data
* p_d
= dev
->platform_data
;
202 if (( 1 << vdd
) & p_d
->ocr_mask
) {
203 set_scoop_gpio(&tosascoop_device
.dev
,TOSA_SCOOP_PWR_ON
);
205 reset_scoop_gpio(&tosascoop_device
.dev
,TOSA_SCOOP_PWR_ON
);
209 static int tosa_mci_get_ro(struct device
*dev
)
211 return (read_scoop_reg(&tosascoop_device
.dev
, SCOOP_GPWR
)&TOSA_SCOOP_SD_WP
);
214 static void tosa_mci_exit(struct device
*dev
, void *data
)
216 free_irq(TOSA_IRQ_GPIO_nSD_DETECT
, data
);
219 static struct pxamci_platform_data tosa_mci_platform_data
= {
220 .ocr_mask
= MMC_VDD_32_33
|MMC_VDD_33_34
,
221 .init
= tosa_mci_init
,
222 .get_ro
= tosa_mci_get_ro
,
223 .setpower
= tosa_mci_setpower
,
224 .exit
= tosa_mci_exit
,
230 static void tosa_irda_transceiver_mode(struct device
*dev
, int mode
)
233 reset_scoop_gpio(&tosascoop_device
.dev
,TOSA_SCOOP_IR_POWERDWN
);
234 pxa_gpio_mode(GPIO47_STTXD
|GPIO_DFLT_LOW
);
235 pxa_gpio_mode(GPIO47_STTXD
|GPIO_OUT
);
237 pxa_gpio_mode(GPIO47_STTXD_MD
);
238 set_scoop_gpio(&tosascoop_device
.dev
,TOSA_SCOOP_IR_POWERDWN
);
242 static struct pxaficp_platform_data tosa_ficp_platform_data
= {
243 .transceiver_cap
= IR_SIRMODE
| IR_OFF
,
244 .transceiver_mode
= tosa_irda_transceiver_mode
,
250 static struct platform_device tosakbd_device
= {
251 .name
= "tosa-keyboard",
255 static struct platform_device
*devices
[] __initdata
= {
257 &tosascoop_jc_device
,
261 static void __init
tosa_init(void)
263 pxa_gpio_mode(TOSA_GPIO_ON_RESET
| GPIO_IN
);
264 pxa_gpio_mode(TOSA_GPIO_TC6393_INT
| GPIO_IN
);
265 pxa_gpio_mode(TOSA_GPIO_USB_IN
| GPIO_IN
);
267 /* setup sleep mode values */
276 /* enable batt_fault */
279 pxa_set_mci_info(&tosa_mci_platform_data
);
280 pxa_set_udc_info(&udc_info
);
281 pxa_set_ficp_info(&tosa_ficp_platform_data
);
282 platform_scoop_config
= &tosa_pcmcia_config
;
284 platform_add_devices(devices
, ARRAY_SIZE(devices
));
287 static void __init
fixup_tosa(struct machine_desc
*desc
,
288 struct tag
*tags
, char **cmdline
, struct meminfo
*mi
)
290 sharpsl_save_param();
292 mi
->bank
[0].start
= 0xa0000000;
293 mi
->bank
[0].node
= 0;
294 mi
->bank
[0].size
= (64*1024*1024);
297 MACHINE_START(TOSA
, "SHARP Tosa")
298 .phys_ram
= 0xa0000000,
299 .phys_io
= 0x40000000,
300 .io_pg_offst
= (io_p2v(0x40000000) >> 18) & 0xfffc,
302 .map_io
= pxa_map_io
,
303 .init_irq
= pxa_init_irq
,
304 .init_machine
= tosa_init
,