[SCSI] qla1280: convert to use the data buffer accessors
[linux-2.6/verdex.git] / arch / arm / mach-omap1 / board-voiceblue.c
blob214dd19889aca953922e77d6fc49efbb33c4daca
1 /*
2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/platform_device.h>
17 #include <linux/interrupt.h>
18 #include <linux/init.h>
19 #include <linux/kernel.h>
20 #include <linux/notifier.h>
21 #include <linux/reboot.h>
22 #include <linux/serial_8250.h>
23 #include <linux/serial_reg.h>
25 #include <asm/hardware.h>
26 #include <asm/mach-types.h>
27 #include <asm/mach/arch.h>
28 #include <asm/mach/flash.h>
29 #include <asm/mach/map.h>
31 #include <asm/arch/common.h>
32 #include <asm/arch/gpio.h>
33 #include <asm/arch/mux.h>
34 #include <asm/arch/tc.h>
35 #include <asm/arch/usb.h>
37 extern void omap_init_time(void);
38 extern int omap_gpio_init(void);
40 static struct plat_serial8250_port voiceblue_ports[] = {
42 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
43 .irq = OMAP_GPIO_IRQ(12),
44 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
45 .iotype = UPIO_MEM,
46 .regshift = 1,
47 .uartclk = 3686400,
50 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
51 .irq = OMAP_GPIO_IRQ(13),
52 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
53 .iotype = UPIO_MEM,
54 .regshift = 1,
55 .uartclk = 3686400,
58 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
59 .irq = OMAP_GPIO_IRQ(14),
60 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
61 .iotype = UPIO_MEM,
62 .regshift = 1,
63 .uartclk = 3686400,
66 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
67 .irq = OMAP_GPIO_IRQ(15),
68 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
69 .iotype = UPIO_MEM,
70 .regshift = 1,
71 .uartclk = 3686400,
73 { },
76 static struct platform_device serial_device = {
77 .name = "serial8250",
78 .id = PLAT8250_DEV_PLATFORM1,
79 .dev = {
80 .platform_data = voiceblue_ports,
84 static int __init ext_uart_init(void)
86 return platform_device_register(&serial_device);
88 arch_initcall(ext_uart_init);
90 static struct flash_platform_data voiceblue_flash_data = {
91 .map_name = "cfi_probe",
92 .width = 2,
95 static struct resource voiceblue_flash_resource = {
96 .start = OMAP_CS0_PHYS,
97 .end = OMAP_CS0_PHYS + SZ_32M - 1,
98 .flags = IORESOURCE_MEM,
101 static struct platform_device voiceblue_flash_device = {
102 .name = "omapflash",
103 .id = 0,
104 .dev = {
105 .platform_data = &voiceblue_flash_data,
107 .num_resources = 1,
108 .resource = &voiceblue_flash_resource,
111 static struct resource voiceblue_smc91x_resources[] = {
112 [0] = {
113 .start = OMAP_CS2_PHYS + 0x300,
114 .end = OMAP_CS2_PHYS + 0x300 + 16,
115 .flags = IORESOURCE_MEM,
117 [1] = {
118 .start = OMAP_GPIO_IRQ(8),
119 .end = OMAP_GPIO_IRQ(8),
120 .flags = IORESOURCE_IRQ,
124 static struct platform_device voiceblue_smc91x_device = {
125 .name = "smc91x",
126 .id = 0,
127 .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
128 .resource = voiceblue_smc91x_resources,
131 static struct platform_device *voiceblue_devices[] __initdata = {
132 &voiceblue_flash_device,
133 &voiceblue_smc91x_device,
136 static struct omap_usb_config voiceblue_usb_config __initdata = {
137 .hmc_mode = 3,
138 .register_host = 1,
139 .register_dev = 1,
140 .pins[0] = 2,
141 .pins[1] = 6,
142 .pins[2] = 6,
145 static struct omap_mmc_config voiceblue_mmc_config __initdata = {
146 .mmc[0] = {
147 .enabled = 1,
148 .power_pin = 2,
149 .switch_pin = -1,
153 static struct omap_uart_config voiceblue_uart_config __initdata = {
154 .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
157 static struct omap_board_config_kernel voiceblue_config[] = {
158 { OMAP_TAG_USB, &voiceblue_usb_config },
159 { OMAP_TAG_MMC, &voiceblue_mmc_config },
160 { OMAP_TAG_UART, &voiceblue_uart_config },
163 static void __init voiceblue_init_irq(void)
165 omap1_init_common_hw();
166 omap_init_irq();
167 omap_gpio_init();
170 static void __init voiceblue_init(void)
172 /* Watchdog */
173 omap_request_gpio(0);
174 /* smc91x reset */
175 omap_request_gpio(7);
176 omap_set_gpio_direction(7, 0);
177 omap_set_gpio_dataout(7, 1);
178 udelay(2); /* wait at least 100ns */
179 omap_set_gpio_dataout(7, 0);
180 mdelay(50); /* 50ms until PHY ready */
181 /* smc91x interrupt pin */
182 omap_request_gpio(8);
183 /* 16C554 reset*/
184 omap_request_gpio(6);
185 omap_set_gpio_direction(6, 0);
186 omap_set_gpio_dataout(6, 0);
187 /* 16C554 interrupt pins */
188 omap_request_gpio(12);
189 omap_request_gpio(13);
190 omap_request_gpio(14);
191 omap_request_gpio(15);
192 set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
193 set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
194 set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
195 set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
197 platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
198 omap_board_config = voiceblue_config;
199 omap_board_config_size = ARRAY_SIZE(voiceblue_config);
200 omap_serial_init();
202 /* There is a good chance board is going up, so enable power LED
203 * (it is connected through invertor) */
204 omap_writeb(0x00, OMAP_LPG1_LCR);
205 omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
208 static void __init voiceblue_map_io(void)
210 omap1_map_common_io();
213 #define MACHINE_PANICED 1
214 #define MACHINE_REBOOTING 2
215 #define MACHINE_REBOOT 4
216 static unsigned long machine_state;
218 static int panic_event(struct notifier_block *this, unsigned long event,
219 void *ptr)
221 if (test_and_set_bit(MACHINE_PANICED, &machine_state))
222 return NOTIFY_DONE;
224 /* Flash power LED */
225 omap_writeb(0x78, OMAP_LPG1_LCR);
226 omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
228 return NOTIFY_DONE;
231 static struct notifier_block panic_block = {
232 .notifier_call = panic_event,
235 static int __init voiceblue_setup(void)
237 /* Setup panic notifier */
238 atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
240 return 0;
242 postcore_initcall(voiceblue_setup);
244 static int wdt_gpio_state;
246 void voiceblue_wdt_enable(void)
248 omap_set_gpio_direction(0, 0);
249 omap_set_gpio_dataout(0, 0);
250 omap_set_gpio_dataout(0, 1);
251 omap_set_gpio_dataout(0, 0);
252 wdt_gpio_state = 0;
255 void voiceblue_wdt_disable(void)
257 omap_set_gpio_dataout(0, 0);
258 omap_set_gpio_dataout(0, 1);
259 omap_set_gpio_dataout(0, 0);
260 omap_set_gpio_direction(0, 1);
263 void voiceblue_wdt_ping(void)
265 if (test_bit(MACHINE_REBOOT, &machine_state))
266 return;
268 wdt_gpio_state = !wdt_gpio_state;
269 omap_set_gpio_dataout(0, wdt_gpio_state);
272 void voiceblue_reset(void)
274 set_bit(MACHINE_REBOOT, &machine_state);
275 voiceblue_wdt_enable();
276 while (1) ;
279 EXPORT_SYMBOL(voiceblue_wdt_enable);
280 EXPORT_SYMBOL(voiceblue_wdt_disable);
281 EXPORT_SYMBOL(voiceblue_wdt_ping);
283 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
284 /* Maintainer: Ladislav Michl <michl@2n.cz> */
285 .phys_io = 0xfff00000,
286 .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
287 .boot_params = 0x10000100,
288 .map_io = voiceblue_map_io,
289 .init_irq = voiceblue_init_irq,
290 .init_machine = voiceblue_init,
291 .timer = &omap_timer,
292 MACHINE_END