[SCSI] qla1280: convert to use the data buffer accessors
[linux-2.6/verdex.git] / arch / mips / sni / a20r.c
blobb7460759997117833caf79c5cb3f0c2c7b28303a
1 /*
2 * A20R specific code
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
8 * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
9 */
11 #include <linux/init.h>
12 #include <linux/interrupt.h>
13 #include <linux/platform_device.h>
14 #include <linux/serial_8250.h>
16 #include <asm/sni.h>
17 #include <asm/time.h>
19 #define PORT(_base,_irq) \
20 { \
21 .iobase = _base, \
22 .irq = _irq, \
23 .uartclk = 1843200, \
24 .iotype = UPIO_PORT, \
25 .flags = UPF_BOOT_AUTOCONF, \
28 static struct plat_serial8250_port a20r_data[] = {
29 PORT(0x3f8, 4),
30 PORT(0x2f8, 3),
31 { },
34 static struct platform_device a20r_serial8250_device = {
35 .name = "serial8250",
36 .id = PLAT8250_DEV_PLATFORM,
37 .dev = {
38 .platform_data = a20r_data,
42 static struct resource a20r_ds1216_rsrc[] = {
44 .start = 0x1c081ffc,
45 .end = 0x1c081fff,
46 .flags = IORESOURCE_MEM
50 static struct platform_device a20r_ds1216_device = {
51 .name = "rtc-ds1216",
52 .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc),
53 .resource = a20r_ds1216_rsrc
56 static struct resource snirm_82596_rsrc[] = {
58 .start = 0x18000000,
59 .end = 0x18000004,
60 .flags = IORESOURCE_MEM
63 .start = 0x18010000,
64 .end = 0x18010004,
65 .flags = IORESOURCE_MEM
68 .start = 0x1ff00000,
69 .end = 0x1ff00020,
70 .flags = IORESOURCE_MEM
73 .start = 22,
74 .end = 22,
75 .flags = IORESOURCE_IRQ
78 .flags = 0x01 /* 16bit mpu port access */
82 static struct platform_device snirm_82596_pdev = {
83 .name = "snirm_82596",
84 .num_resources = ARRAY_SIZE(snirm_82596_rsrc),
85 .resource = snirm_82596_rsrc
88 static struct resource snirm_53c710_rsrc[] = {
90 .start = 0x19000000,
91 .end = 0x190fffff,
92 .flags = IORESOURCE_MEM
95 .start = 19,
96 .end = 19,
97 .flags = IORESOURCE_IRQ
101 static struct platform_device snirm_53c710_pdev = {
102 .name = "snirm_53c710",
103 .num_resources = ARRAY_SIZE(snirm_53c710_rsrc),
104 .resource = snirm_53c710_rsrc
107 static struct resource sc26xx_rsrc[] = {
109 .start = 0x1c070000,
110 .end = 0x1c0700ff,
111 .flags = IORESOURCE_MEM
114 .start = 20,
115 .end = 20,
116 .flags = IORESOURCE_IRQ
120 static struct platform_device sc26xx_pdev = {
121 .name = "SC26xx",
122 .num_resources = ARRAY_SIZE(sc26xx_rsrc),
123 .resource = sc26xx_rsrc
126 static u32 a20r_ack_hwint(void)
128 u32 status = read_c0_status();
130 write_c0_status(status | 0x00010000);
131 asm volatile(
132 " .set push \n"
133 " .set noat \n"
134 " .set noreorder \n"
135 " lw $1, 0(%0) \n"
136 " sb $0, 0(%1) \n"
137 " sync \n"
138 " lb %1, 0(%1) \n"
139 " b 1f \n"
140 " ori %1, $1, 2 \n"
141 " .align 8 \n"
142 "1: \n"
143 " nop \n"
144 " sw %1, 0(%0) \n"
145 " sync \n"
146 " li %1, 0x20 \n"
147 "2: \n"
148 " nop \n"
149 " bnez %1,2b \n"
150 " addiu %1, -1 \n"
151 " sw $1, 0(%0) \n"
152 " sync \n"
153 ".set pop \n"
155 : "Jr" (PCIMT_UCONF), "Jr" (0xbc000000));
156 write_c0_status(status);
158 return status;
161 static inline void unmask_a20r_irq(unsigned int irq)
163 set_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
164 irq_enable_hazard();
167 static inline void mask_a20r_irq(unsigned int irq)
169 clear_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
170 irq_disable_hazard();
173 static void end_a20r_irq(unsigned int irq)
175 if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
176 a20r_ack_hwint();
177 unmask_a20r_irq(irq);
181 static struct irq_chip a20r_irq_type = {
182 .typename = "A20R",
183 .ack = mask_a20r_irq,
184 .mask = mask_a20r_irq,
185 .mask_ack = mask_a20r_irq,
186 .unmask = unmask_a20r_irq,
187 .end = end_a20r_irq,
191 * hwint 0 receive all interrupts
193 static void a20r_hwint(void)
195 u32 cause, status;
196 int irq;
198 clear_c0_status(IE_IRQ0);
199 status = a20r_ack_hwint();
200 cause = read_c0_cause();
202 irq = ffs(((cause & status) >> 8) & 0xf8);
203 if (likely(irq > 0))
204 do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
205 set_c0_status(IE_IRQ0);
208 void __init sni_a20r_irq_init(void)
210 int i;
212 for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
213 set_irq_chip(i, &a20r_irq_type);
214 sni_hwint = a20r_hwint;
215 change_c0_status(ST0_IM, IE_IRQ0);
216 setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
219 void sni_a20r_init(void)
221 /* FIXME, remove if not needed */
224 static int __init snirm_a20r_setup_devinit(void)
226 switch (sni_brd_type) {
227 case SNI_BRD_TOWER_OASIC:
228 case SNI_BRD_MINITOWER:
229 platform_device_register(&snirm_82596_pdev);
230 platform_device_register(&snirm_53c710_pdev);
231 platform_device_register(&sc26xx_pdev);
232 platform_device_register(&a20r_serial8250_device);
233 platform_device_register(&a20r_ds1216_device);
234 break;
237 return 0;
240 device_initcall(snirm_a20r_setup_devinit);