drivers/acpi/hardware/hwsleep.c

   1
   2 /******************************************************************************
   3  *
   4  * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2006, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <linux/module.h>
  46 #include <acpi/acpi.h>
  47
  48 #define _COMPONENT          ACPI_HARDWARE
  49 ACPI_MODULE_NAME("hwsleep")
  50
  51 /*******************************************************************************
  52  *
  53  * FUNCTION:    acpi_set_firmware_waking_vector
  54  *
  55  * PARAMETERS:  physical_address    - Physical address of ACPI real mode
  56  *                                    entry point.
  57  *
  58  * RETURN:      Status
  59  *
  60  * DESCRIPTION: Access function for the firmware_waking_vector field in FACS
  61  *
  62  ******************************************************************************/
  63 acpi_status
  64 acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
  65 {
  66
  67         ACPI_FUNCTION_TRACE("acpi_set_firmware_waking_vector");
  68
  69         /* Set the vector */
  70
  71         if (acpi_gbl_common_fACS.vector_width == 32) {
  72                 *(ACPI_CAST_PTR
  73                   (u32, acpi_gbl_common_fACS.firmware_waking_vector))
  74                     = (u32) physical_address;
  75         } else {
  76                 *acpi_gbl_common_fACS.firmware_waking_vector = physical_address;
  77         }
  78
  79         return_ACPI_STATUS(AE_OK);
  80 }
  81
  82 /*******************************************************************************
  83  *
  84  * FUNCTION:    acpi_get_firmware_waking_vector
  85  *
  86  * PARAMETERS:  *physical_address   - Where the contents of
  87  *                                    the firmware_waking_vector field of
  88  *                                    the FACS will be returned.
  89  *
  90  * RETURN:      Status, vector
  91  *
  92  * DESCRIPTION: Access function for the firmware_waking_vector field in FACS
  93  *
  94  ******************************************************************************/
  95
  96 #ifdef ACPI_FUTURE_USAGE
  97 acpi_status
  98 acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
  99 {
 100
 101         ACPI_FUNCTION_TRACE("acpi_get_firmware_waking_vector");
 102
 103         if (!physical_address) {
 104                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 105         }
 106
 107         /* Get the vector */
 108
 109         if (acpi_gbl_common_fACS.vector_width == 32) {
 110                 *physical_address = (acpi_physical_address)
 111                     *
 112                     (ACPI_CAST_PTR
 113                      (u32, acpi_gbl_common_fACS.firmware_waking_vector));
 114         } else {
 115                 *physical_address =
 116                     *acpi_gbl_common_fACS.firmware_waking_vector;
 117         }
 118
 119         return_ACPI_STATUS(AE_OK);
 120 }
 121 #endif
 122
 123 /*******************************************************************************
 124  *
 125  * FUNCTION:    acpi_enter_sleep_state_prep
 126  *
 127  * PARAMETERS:  sleep_state         - Which sleep state to enter
 128  *
 129  * RETURN:      Status
 130  *
 131  * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231)
 132  *              This function must execute with interrupts enabled.
 133  *              We break sleeping into 2 stages so that OSPM can handle
 134  *              various OS-specific tasks between the two steps.
 135  *
 136  ******************************************************************************/
 137
 138 acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
 139 {
 140         acpi_status status;
 141         struct acpi_object_list arg_list;
 142         union acpi_object arg;
 143
 144         ACPI_FUNCTION_TRACE("acpi_enter_sleep_state_prep");
 145
 146         /*
 147          * _PSW methods could be run here to enable wake-on keyboard, LAN, etc.
 148          */
 149         status = acpi_get_sleep_type_data(sleep_state,
 150                                           &acpi_gbl_sleep_type_a,
 151                                           &acpi_gbl_sleep_type_b);
 152         if (ACPI_FAILURE(status)) {
 153                 return_ACPI_STATUS(status);
 154         }
 155
 156         /* Setup parameter object */
 157
 158         arg_list.count = 1;
 159         arg_list.pointer = &arg;
 160
 161         arg.type = ACPI_TYPE_INTEGER;
 162         arg.integer.value = sleep_state;
 163
 164         /* Run the _PTS and _GTS methods */
 165
 166         status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL);
 167         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 168                 return_ACPI_STATUS(status);
 169         }
 170
 171         status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
 172         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 173                 return_ACPI_STATUS(status);
 174         }
 175
 176         /* Setup the argument to _SST */
 177
 178         switch (sleep_state) {
 179         case ACPI_STATE_S0:
 180                 arg.integer.value = ACPI_SST_WORKING;
 181                 break;
 182
 183         case ACPI_STATE_S1:
 184         case ACPI_STATE_S2:
 185         case ACPI_STATE_S3:
 186                 arg.integer.value = ACPI_SST_SLEEPING;
 187                 break;
 188
 189         case ACPI_STATE_S4:
 190                 arg.integer.value = ACPI_SST_SLEEP_CONTEXT;
 191                 break;
 192
 193         default:
 194                 arg.integer.value = ACPI_SST_INDICATOR_OFF;     /* Default is off */
 195                 break;
 196         }
 197
 198         /* Set the system indicators to show the desired sleep state. */
 199
 200         status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 201         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 202                 ACPI_EXCEPTION((AE_INFO, status,
 203                                 "While executing method _SST"));
 204         }
 205
 206         return_ACPI_STATUS(AE_OK);
 207 }
 208
 209 /*******************************************************************************
 210  *
 211  * FUNCTION:    acpi_enter_sleep_state
 212  *
 213  * PARAMETERS:  sleep_state         - Which sleep state to enter
 214  *
 215  * RETURN:      Status
 216  *
 217  * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
 218  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 219  *
 220  ******************************************************************************/
 221
 222 acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
 223 {
 224         u32 PM1Acontrol;
 225         u32 PM1Bcontrol;
 226         struct acpi_bit_register_info *sleep_type_reg_info;
 227         struct acpi_bit_register_info *sleep_enable_reg_info;
 228         u32 in_value;
 229         acpi_status status;
 230
 231         ACPI_FUNCTION_TRACE("acpi_enter_sleep_state");
 232
 233         if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
 234             (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
 235                 ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X",
 236                             acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
 237                 return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 238         }
 239
 240         sleep_type_reg_info =
 241             acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
 242         sleep_enable_reg_info =
 243             acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
 244
 245         /* Clear wake status */
 246
 247         status =
 248             acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK);
 249         if (ACPI_FAILURE(status)) {
 250                 return_ACPI_STATUS(status);
 251         }
 252
 253         /* Clear all fixed and general purpose status bits */
 254
 255         status = acpi_hw_clear_acpi_status(ACPI_MTX_DO_NOT_LOCK);
 256         if (ACPI_FAILURE(status)) {
 257                 return_ACPI_STATUS(status);
 258         }
 259
 260         /*
 261          * 1) Disable/Clear all GPEs
 262          * 2) Enable all wakeup GPEs
 263          */
 264         status = acpi_hw_disable_all_gpes();
 265         if (ACPI_FAILURE(status)) {
 266                 return_ACPI_STATUS(status);
 267         }
 268         acpi_gbl_system_awake_and_running = FALSE;
 269
 270         status = acpi_hw_enable_all_wakeup_gpes();
 271         if (ACPI_FAILURE(status)) {
 272                 return_ACPI_STATUS(status);
 273         }
 274
 275         /* Get current value of PM1A control */
 276
 277         status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
 278                                        ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol);
 279         if (ACPI_FAILURE(status)) {
 280                 return_ACPI_STATUS(status);
 281         }
 282         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
 283                           "Entering sleep state [S%d]\n", sleep_state));
 284
 285         /* Clear SLP_EN and SLP_TYP fields */
 286
 287         PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
 288                          sleep_enable_reg_info->access_bit_mask);
 289         PM1Bcontrol = PM1Acontrol;
 290
 291         /* Insert SLP_TYP bits */
 292
 293         PM1Acontrol |=
 294             (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position);
 295         PM1Bcontrol |=
 296             (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position);
 297
 298         /*
 299          * We split the writes of SLP_TYP and SLP_EN to workaround
 300          * poorly implemented hardware.
 301          */
 302
 303         /* Write #1: fill in SLP_TYP data */
 304
 305         status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 306                                         ACPI_REGISTER_PM1A_CONTROL,
 307                                         PM1Acontrol);
 308         if (ACPI_FAILURE(status)) {
 309                 return_ACPI_STATUS(status);
 310         }
 311
 312         status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 313                                         ACPI_REGISTER_PM1B_CONTROL,
 314                                         PM1Bcontrol);
 315         if (ACPI_FAILURE(status)) {
 316                 return_ACPI_STATUS(status);
 317         }
 318
 319         /* Insert SLP_ENABLE bit */
 320
 321         PM1Acontrol |= sleep_enable_reg_info->access_bit_mask;
 322         PM1Bcontrol |= sleep_enable_reg_info->access_bit_mask;
 323
 324         /* Write #2: SLP_TYP + SLP_EN */
 325
 326         ACPI_FLUSH_CPU_CACHE();
 327
 328         status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 329                                         ACPI_REGISTER_PM1A_CONTROL,
 330                                         PM1Acontrol);
 331         if (ACPI_FAILURE(status)) {
 332                 return_ACPI_STATUS(status);
 333         }
 334
 335         status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 336                                         ACPI_REGISTER_PM1B_CONTROL,
 337                                         PM1Bcontrol);
 338         if (ACPI_FAILURE(status)) {
 339                 return_ACPI_STATUS(status);
 340         }
 341
 342         if (sleep_state > ACPI_STATE_S3) {
 343                 /*
 344                  * We wanted to sleep > S3, but it didn't happen (by virtue of the
 345                  * fact that we are still executing!)
 346                  *
 347                  * Wait ten seconds, then try again. This is to get S4/S5 to work on
 348                  * all machines.
 349                  *
 350                  * We wait so long to allow chipsets that poll this reg very slowly to
 351                  * still read the right value. Ideally, this block would go
 352                  * away entirely.
 353                  */
 354                 acpi_os_stall(10000000);
 355
 356                 status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 357                                                 ACPI_REGISTER_PM1_CONTROL,
 358                                                 sleep_enable_reg_info->
 359                                                 access_bit_mask);
 360                 if (ACPI_FAILURE(status)) {
 361                         return_ACPI_STATUS(status);
 362                 }
 363         }
 364
 365         /* Wait until we enter sleep state */
 366
 367         do {
 368                 status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value,
 369                                            ACPI_MTX_DO_NOT_LOCK);
 370                 if (ACPI_FAILURE(status)) {
 371                         return_ACPI_STATUS(status);
 372                 }
 373
 374                 /* Spin until we wake */
 375
 376         } while (!in_value);
 377
 378         return_ACPI_STATUS(AE_OK);
 379 }
 380
 381 EXPORT_SYMBOL(acpi_enter_sleep_state);
 382
 383 /*******************************************************************************
 384  *
 385  * FUNCTION:    acpi_enter_sleep_state_s4bios
 386  *
 387  * PARAMETERS:  None
 388  *
 389  * RETURN:      Status
 390  *
 391  * DESCRIPTION: Perform a S4 bios request.
 392  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 393  *
 394  ******************************************************************************/
 395
 396 acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
 397 {
 398         u32 in_value;
 399         acpi_status status;
 400
 401         ACPI_FUNCTION_TRACE("acpi_enter_sleep_state_s4bios");
 402
 403         status =
 404             acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK);
 405         if (ACPI_FAILURE(status)) {
 406                 return_ACPI_STATUS(status);
 407         }
 408
 409         status = acpi_hw_clear_acpi_status(ACPI_MTX_DO_NOT_LOCK);
 410         if (ACPI_FAILURE(status)) {
 411                 return_ACPI_STATUS(status);
 412         }
 413
 414         /*
 415          * 1) Disable/Clear all GPEs
 416          * 2) Enable all wakeup GPEs
 417          */
 418         status = acpi_hw_disable_all_gpes();
 419         if (ACPI_FAILURE(status)) {
 420                 return_ACPI_STATUS(status);
 421         }
 422         acpi_gbl_system_awake_and_running = FALSE;
 423
 424         status = acpi_hw_enable_all_wakeup_gpes();
 425         if (ACPI_FAILURE(status)) {
 426                 return_ACPI_STATUS(status);
 427         }
 428
 429         ACPI_FLUSH_CPU_CACHE();
 430
 431         status = acpi_os_write_port(acpi_gbl_FADT->smi_cmd,
 432                                     (u32) acpi_gbl_FADT->S4bios_req, 8);
 433
 434         do {
 435                 acpi_os_stall(1000);
 436                 status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value,
 437                                            ACPI_MTX_DO_NOT_LOCK);
 438                 if (ACPI_FAILURE(status)) {
 439                         return_ACPI_STATUS(status);
 440                 }
 441         } while (!in_value);
 442
 443         return_ACPI_STATUS(AE_OK);
 444 }
 445
 446 EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios);
 447
 448 /*******************************************************************************
 449  *
 450  * FUNCTION:    acpi_leave_sleep_state
 451  *
 452  * PARAMETERS:  sleep_state         - Which sleep state we just exited
 453  *
 454  * RETURN:      Status
 455  *
 456  * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
 457  *              Called with interrupts ENABLED.
 458  *
 459  ******************************************************************************/
 460
 461 acpi_status acpi_leave_sleep_state(u8 sleep_state)
 462 {
 463         struct acpi_object_list arg_list;
 464         union acpi_object arg;
 465         acpi_status status;
 466         struct acpi_bit_register_info *sleep_type_reg_info;
 467         struct acpi_bit_register_info *sleep_enable_reg_info;
 468         u32 PM1Acontrol;
 469         u32 PM1Bcontrol;
 470
 471         ACPI_FUNCTION_TRACE("acpi_leave_sleep_state");
 472
 473         /*
 474          * Set SLP_TYPE and SLP_EN to state S0.
 475          * This is unclear from the ACPI Spec, but it is required
 476          * by some machines.
 477          */
 478         status = acpi_get_sleep_type_data(ACPI_STATE_S0,
 479                                           &acpi_gbl_sleep_type_a,
 480                                           &acpi_gbl_sleep_type_b);
 481         if (ACPI_SUCCESS(status)) {
 482                 sleep_type_reg_info =
 483                     acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
 484                 sleep_enable_reg_info =
 485                     acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
 486
 487                 /* Get current value of PM1A control */
 488
 489                 status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
 490                                                ACPI_REGISTER_PM1_CONTROL,
 491                                                &PM1Acontrol);
 492                 if (ACPI_SUCCESS(status)) {
 493                         /* Clear SLP_EN and SLP_TYP fields */
 494
 495                         PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
 496                                          sleep_enable_reg_info->
 497                                          access_bit_mask);
 498                         PM1Bcontrol = PM1Acontrol;
 499
 500                         /* Insert SLP_TYP bits */
 501
 502                         PM1Acontrol |=
 503                             (acpi_gbl_sleep_type_a << sleep_type_reg_info->
 504                              bit_position);
 505                         PM1Bcontrol |=
 506                             (acpi_gbl_sleep_type_b << sleep_type_reg_info->
 507                              bit_position);
 508
 509                         /* Just ignore any errors */
 510
 511                         (void)acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 512                                                      ACPI_REGISTER_PM1A_CONTROL,
 513                                                      PM1Acontrol);
 514                         (void)acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 515                                                      ACPI_REGISTER_PM1B_CONTROL,
 516                                                      PM1Bcontrol);
 517                 }
 518         }
 519
 520         /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
 521
 522         acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
 523
 524         /* Setup parameter object */
 525
 526         arg_list.count = 1;
 527         arg_list.pointer = &arg;
 528         arg.type = ACPI_TYPE_INTEGER;
 529
 530         /* Ignore any errors from these methods */
 531
 532         arg.integer.value = ACPI_SST_WAKING;
 533         status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 534         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 535                 ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
 536         }
 537
 538         arg.integer.value = sleep_state;
 539         status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
 540         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 541                 ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
 542         }
 543
 544         status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
 545         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 546                 ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
 547         }
 548         /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
 549
 550         /*
 551          * Restore the GPEs:
 552          * 1) Disable/Clear all GPEs
 553          * 2) Enable all runtime GPEs
 554          */
 555         status = acpi_hw_disable_all_gpes();
 556         if (ACPI_FAILURE(status)) {
 557                 return_ACPI_STATUS(status);
 558         }
 559         acpi_gbl_system_awake_and_running = TRUE;
 560
 561         status = acpi_hw_enable_all_runtime_gpes();
 562         if (ACPI_FAILURE(status)) {
 563                 return_ACPI_STATUS(status);
 564         }
 565
 566         /* Enable power button */
 567
 568         (void)
 569             acpi_set_register(acpi_gbl_fixed_event_info
 570                               [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1,
 571                               ACPI_MTX_DO_NOT_LOCK);
 572
 573         (void)
 574             acpi_set_register(acpi_gbl_fixed_event_info
 575                               [ACPI_EVENT_POWER_BUTTON].status_register_id, 1,
 576                               ACPI_MTX_DO_NOT_LOCK);
 577
 578         arg.integer.value = ACPI_SST_WORKING;
 579         status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 580         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 581                 ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
 582         }
 583
 584         return_ACPI_STATUS(status);
 585 }