[PATCH] W1: possible cleanups
[linux-2.6/verdex.git] / drivers / acorn / char / i2c.c
blobc26c08b368297897f6a07bb86bfb02db3212b3ce
1 /*
2 * linux/drivers/acorn/char/i2c.c
4 * Copyright (C) 2000 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * ARM IOC/IOMD i2c driver.
12 * On Acorn machines, the following i2c devices are on the bus:
13 * - PCF8583 real time clock & static RAM
15 #include <linux/capability.h>
16 #include <linux/init.h>
17 #include <linux/sched.h>
18 #include <linux/time.h>
19 #include <linux/miscdevice.h>
20 #include <linux/rtc.h>
21 #include <linux/i2c.h>
22 #include <linux/i2c-algo-bit.h>
23 #include <linux/fs.h>
25 #include <asm/hardware.h>
26 #include <asm/io.h>
27 #include <asm/hardware/ioc.h>
28 #include <asm/system.h>
29 #include <asm/uaccess.h>
31 #include "pcf8583.h"
33 extern int (*set_rtc)(void);
35 static struct i2c_client *rtc_client;
36 static const unsigned char days_in_mon[] =
37 { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
39 #define CMOS_CHECKSUM (63)
42 * Acorn machines store the year in the static RAM at
43 * location 128.
45 #define CMOS_YEAR (64 + 128)
47 static inline int rtc_command(int cmd, void *data)
49 int ret = -EIO;
51 if (rtc_client)
52 ret = rtc_client->driver->command(rtc_client, cmd, data);
54 return ret;
58 * Update the century + year bytes in the CMOS RAM, ensuring
59 * that the check byte is correctly adjusted for the change.
61 static int rtc_update_year(unsigned int new_year)
63 unsigned char yr[2], chk;
64 struct mem cmos_year = { CMOS_YEAR, sizeof(yr), yr };
65 struct mem cmos_check = { CMOS_CHECKSUM, 1, &chk };
66 int ret;
68 ret = rtc_command(MEM_READ, &cmos_check);
69 if (ret)
70 goto out;
71 ret = rtc_command(MEM_READ, &cmos_year);
72 if (ret)
73 goto out;
75 chk -= yr[1] + yr[0];
77 yr[1] = new_year / 100;
78 yr[0] = new_year % 100;
80 chk += yr[1] + yr[0];
82 ret = rtc_command(MEM_WRITE, &cmos_year);
83 if (ret == 0)
84 ret = rtc_command(MEM_WRITE, &cmos_check);
85 out:
86 return ret;
90 * Read the current RTC time and date, and update xtime.
92 static void get_rtc_time(struct rtc_tm *rtctm, unsigned int *year)
94 unsigned char ctrl, yr[2];
95 struct mem rtcmem = { CMOS_YEAR, sizeof(yr), yr };
96 int real_year, year_offset;
99 * Ensure that the RTC is running.
101 rtc_command(RTC_GETCTRL, &ctrl);
102 if (ctrl & 0xc0) {
103 unsigned char new_ctrl = ctrl & ~0xc0;
105 printk(KERN_WARNING "RTC: resetting control %02x -> %02x\n",
106 ctrl, new_ctrl);
108 rtc_command(RTC_SETCTRL, &new_ctrl);
111 if (rtc_command(RTC_GETDATETIME, rtctm) ||
112 rtc_command(MEM_READ, &rtcmem))
113 return;
115 real_year = yr[0];
118 * The RTC year holds the LSB two bits of the current
119 * year, which should reflect the LSB two bits of the
120 * CMOS copy of the year. Any difference indicates
121 * that we have to correct the CMOS version.
123 year_offset = rtctm->year_off - (real_year & 3);
124 if (year_offset < 0)
126 * RTC year wrapped. Adjust it appropriately.
128 year_offset += 4;
130 *year = real_year + year_offset + yr[1] * 100;
133 static int set_rtc_time(struct rtc_tm *rtctm, unsigned int year)
135 unsigned char leap;
136 int ret;
138 leap = (!(year % 4) && (year % 100)) || !(year % 400);
140 if (rtctm->mon > 12 || rtctm->mon == 0 || rtctm->mday == 0)
141 return -EINVAL;
143 if (rtctm->mday > (days_in_mon[rtctm->mon] + (rtctm->mon == 2 && leap)))
144 return -EINVAL;
146 if (rtctm->hours >= 24 || rtctm->mins >= 60 || rtctm->secs >= 60)
147 return -EINVAL;
150 * The RTC's own 2-bit year must reflect the least
151 * significant two bits of the CMOS year.
153 rtctm->year_off = (year % 100) & 3;
155 ret = rtc_command(RTC_SETDATETIME, rtctm);
156 if (ret == 0)
157 ret = rtc_update_year(year);
159 return ret;
163 * Set the RTC time only. Note that
164 * we do not touch the date.
166 static int k_set_rtc_time(void)
168 struct rtc_tm new_rtctm, old_rtctm;
169 unsigned long nowtime = xtime.tv_sec;
171 if (rtc_command(RTC_GETDATETIME, &old_rtctm))
172 return 0;
174 new_rtctm.cs = xtime.tv_nsec / 10000000;
175 new_rtctm.secs = nowtime % 60; nowtime /= 60;
176 new_rtctm.mins = nowtime % 60; nowtime /= 60;
177 new_rtctm.hours = nowtime % 24;
180 * avoid writing when we're going to change the day
181 * of the month. We will retry in the next minute.
182 * This basically means that if the RTC must not drift
183 * by more than 1 minute in 11 minutes.
185 * [ rtc: 1/1/2000 23:58:00, real 2/1/2000 00:01:00,
186 * rtc gets set to 1/1/2000 00:01:00 ]
188 if ((old_rtctm.hours == 23 && old_rtctm.mins == 59) ||
189 (new_rtctm.hours == 23 && new_rtctm.mins == 59))
190 return 1;
192 return rtc_command(RTC_SETTIME, &new_rtctm);
195 static int rtc_ioctl(struct inode *inode, struct file *file,
196 unsigned int cmd, unsigned long arg)
198 unsigned int year;
199 struct rtc_time rtctm;
200 struct rtc_tm rtc_raw;
202 switch (cmd) {
203 case RTC_ALM_READ:
204 case RTC_ALM_SET:
205 break;
207 case RTC_RD_TIME:
208 memset(&rtctm, 0, sizeof(struct rtc_time));
209 get_rtc_time(&rtc_raw, &year);
210 rtctm.tm_sec = rtc_raw.secs;
211 rtctm.tm_min = rtc_raw.mins;
212 rtctm.tm_hour = rtc_raw.hours;
213 rtctm.tm_mday = rtc_raw.mday;
214 rtctm.tm_mon = rtc_raw.mon - 1; /* month starts at 0 */
215 rtctm.tm_year = year - 1900; /* starts at 1900 */
216 return copy_to_user((void *)arg, &rtctm, sizeof(rtctm))
217 ? -EFAULT : 0;
219 case RTC_SET_TIME:
220 if (!capable(CAP_SYS_TIME))
221 return -EACCES;
223 if (copy_from_user(&rtctm, (void *)arg, sizeof(rtctm)))
224 return -EFAULT;
225 rtc_raw.secs = rtctm.tm_sec;
226 rtc_raw.mins = rtctm.tm_min;
227 rtc_raw.hours = rtctm.tm_hour;
228 rtc_raw.mday = rtctm.tm_mday;
229 rtc_raw.mon = rtctm.tm_mon + 1;
230 year = rtctm.tm_year + 1900;
231 return set_rtc_time(&rtc_raw, year);
232 break;
234 case RTC_EPOCH_READ:
235 return put_user(1900, (unsigned long *)arg);
238 return -EINVAL;
241 static struct file_operations rtc_fops = {
242 .ioctl = rtc_ioctl,
245 static struct miscdevice rtc_dev = {
246 .minor = RTC_MINOR,
247 .name = "rtc",
248 .fops = &rtc_fops,
251 /* IOC / IOMD i2c driver */
253 #define FORCE_ONES 0xdc
254 #define SCL 0x02
255 #define SDA 0x01
258 * We must preserve all non-i2c output bits in IOC_CONTROL.
259 * Note also that we need to preserve the value of SCL and
260 * SDA outputs as well (which may be different from the
261 * values read back from IOC_CONTROL).
263 static u_int force_ones;
265 static void ioc_setscl(void *data, int state)
267 u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
268 u_int ones = force_ones;
270 if (state)
271 ones |= SCL;
272 else
273 ones &= ~SCL;
275 force_ones = ones;
277 ioc_writeb(ioc_control | ones, IOC_CONTROL);
280 static void ioc_setsda(void *data, int state)
282 u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
283 u_int ones = force_ones;
285 if (state)
286 ones |= SDA;
287 else
288 ones &= ~SDA;
290 force_ones = ones;
292 ioc_writeb(ioc_control | ones, IOC_CONTROL);
295 static int ioc_getscl(void *data)
297 return (ioc_readb(IOC_CONTROL) & SCL) != 0;
300 static int ioc_getsda(void *data)
302 return (ioc_readb(IOC_CONTROL) & SDA) != 0;
305 static struct i2c_algo_bit_data ioc_data = {
306 .setsda = ioc_setsda,
307 .setscl = ioc_setscl,
308 .getsda = ioc_getsda,
309 .getscl = ioc_getscl,
310 .udelay = 80,
311 .mdelay = 80,
312 .timeout = 100
315 static int ioc_client_reg(struct i2c_client *client)
317 if (client->driver->id == I2C_DRIVERID_PCF8583 &&
318 client->addr == 0x50) {
319 struct rtc_tm rtctm;
320 unsigned int year;
321 struct timespec tv;
323 rtc_client = client;
324 get_rtc_time(&rtctm, &year);
326 tv.tv_nsec = rtctm.cs * 10000000;
327 tv.tv_sec = mktime(year, rtctm.mon, rtctm.mday,
328 rtctm.hours, rtctm.mins, rtctm.secs);
329 do_settimeofday(&tv);
330 set_rtc = k_set_rtc_time;
333 return 0;
336 static int ioc_client_unreg(struct i2c_client *client)
338 if (client == rtc_client) {
339 set_rtc = NULL;
340 rtc_client = NULL;
343 return 0;
346 static struct i2c_adapter ioc_ops = {
347 .id = I2C_HW_B_IOC,
348 .algo_data = &ioc_data,
349 .client_register = ioc_client_reg,
350 .client_unregister = ioc_client_unreg,
353 static int __init i2c_ioc_init(void)
355 int ret;
357 force_ones = FORCE_ONES | SCL | SDA;
359 ret = i2c_bit_add_bus(&ioc_ops);
361 if (ret >= 0){
362 ret = misc_register(&rtc_dev);
363 if(ret < 0)
364 i2c_bit_del_bus(&ioc_ops);
367 return ret;
370 __initcall(i2c_ioc_init);