2 * HP i8042 SDC + MSM-58321 BBRTC driver.
4 * Copyright (c) 2001 Brian S. Julin
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * Alternatively, this software may be distributed under the terms of the
17 * GNU General Public License ("GPL").
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * System Device Controller Microprocessor Firmware Theory of Operation
31 * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2
32 * efirtc.c by Stephane Eranian/Hewlett Packard
36 #include <linux/hp_sdc.h>
37 #include <linux/errno.h>
38 #include <linux/types.h>
39 #include <linux/init.h>
40 #include <linux/module.h>
41 #include <linux/time.h>
42 #include <linux/miscdevice.h>
43 #include <linux/proc_fs.h>
44 #include <linux/poll.h>
45 #include <linux/rtc.h>
47 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
48 MODULE_DESCRIPTION("HP i8042 SDC + MSM-58321 RTC Driver");
49 MODULE_LICENSE("Dual BSD/GPL");
51 #define RTC_VERSION "1.10d"
53 static unsigned long epoch
= 2000;
55 static struct semaphore i8042tregs
;
57 static hp_sdc_irqhook hp_sdc_rtc_isr
;
59 static struct fasync_struct
*hp_sdc_rtc_async_queue
;
61 static DECLARE_WAIT_QUEUE_HEAD(hp_sdc_rtc_wait
);
63 static ssize_t
hp_sdc_rtc_read(struct file
*file
, char *buf
,
64 size_t count
, loff_t
*ppos
);
66 static int hp_sdc_rtc_ioctl(struct inode
*inode
, struct file
*file
,
67 unsigned int cmd
, unsigned long arg
);
69 static unsigned int hp_sdc_rtc_poll(struct file
*file
, poll_table
*wait
);
71 static int hp_sdc_rtc_open(struct inode
*inode
, struct file
*file
);
72 static int hp_sdc_rtc_release(struct inode
*inode
, struct file
*file
);
73 static int hp_sdc_rtc_fasync (int fd
, struct file
*filp
, int on
);
75 static int hp_sdc_rtc_read_proc(char *page
, char **start
, off_t off
,
76 int count
, int *eof
, void *data
);
78 static void hp_sdc_rtc_isr (int irq
, void *dev_id
,
79 uint8_t status
, uint8_t data
)
84 static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time
*rtctm
)
86 struct semaphore tsem
;
93 tseq
[i
++] = HP_SDC_ACT_DATAREG
|
94 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
;
95 tseq
[i
++] = 0x01; /* write i8042[0x70] */
96 tseq
[i
] = i
/ 7; /* BBRTC reg address */
98 tseq
[i
++] = HP_SDC_CMD_DO_RTCR
; /* Trigger command */
99 tseq
[i
++] = 2; /* expect 1 stat/dat pair back. */
100 i
++; i
++; /* buffer for stat/dat pair */
102 tseq
[84] |= HP_SDC_ACT_SEMAPHORE
;
105 t
.act
.semaphore
= &tsem
;
106 init_MUTEX_LOCKED(&tsem
);
108 if (hp_sdc_enqueue_transaction(&t
)) return -1;
110 down_interruptible(&tsem
); /* Put ourselves to sleep for results. */
112 /* Check for nonpresence of BBRTC */
113 if (!((tseq
[83] | tseq
[90] | tseq
[69] | tseq
[76] |
114 tseq
[55] | tseq
[62] | tseq
[34] | tseq
[41] |
115 tseq
[20] | tseq
[27] | tseq
[6] | tseq
[13]) & 0x0f))
118 memset(rtctm
, 0, sizeof(struct rtc_time
));
119 rtctm
->tm_year
= (tseq
[83] & 0x0f) + (tseq
[90] & 0x0f) * 10;
120 rtctm
->tm_mon
= (tseq
[69] & 0x0f) + (tseq
[76] & 0x0f) * 10;
121 rtctm
->tm_mday
= (tseq
[55] & 0x0f) + (tseq
[62] & 0x0f) * 10;
122 rtctm
->tm_wday
= (tseq
[48] & 0x0f);
123 rtctm
->tm_hour
= (tseq
[34] & 0x0f) + (tseq
[41] & 0x0f) * 10;
124 rtctm
->tm_min
= (tseq
[20] & 0x0f) + (tseq
[27] & 0x0f) * 10;
125 rtctm
->tm_sec
= (tseq
[6] & 0x0f) + (tseq
[13] & 0x0f) * 10;
130 static int hp_sdc_rtc_read_bbrtc (struct rtc_time
*rtctm
)
132 struct rtc_time tm
, tm_last
;
135 /* MSM-58321 has no read latch, so must read twice and compare. */
137 if (hp_sdc_rtc_do_read_bbrtc(&tm_last
)) return -1;
138 if (hp_sdc_rtc_do_read_bbrtc(&tm
)) return -1;
140 while (memcmp(&tm
, &tm_last
, sizeof(struct rtc_time
))) {
141 if (i
++ > 4) return -1;
142 memcpy(&tm_last
, &tm
, sizeof(struct rtc_time
));
143 if (hp_sdc_rtc_do_read_bbrtc(&tm
)) return -1;
146 memcpy(rtctm
, &tm
, sizeof(struct rtc_time
));
152 static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd
, int numreg
)
154 hp_sdc_transaction t
;
156 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
158 HP_SDC_CMD_READ_T1
, 2, 0, 0,
159 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
160 HP_SDC_CMD_READ_T2
, 2, 0, 0,
161 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
162 HP_SDC_CMD_READ_T3
, 2, 0, 0,
163 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
164 HP_SDC_CMD_READ_T4
, 2, 0, 0,
165 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
166 HP_SDC_CMD_READ_T5
, 2, 0, 0
169 t
.endidx
= numreg
* 5;
172 tseq
[t
.endidx
- 4] |= HP_SDC_ACT_SEMAPHORE
; /* numreg assumed > 1 */
175 t
.act
.semaphore
= &i8042tregs
;
177 down_interruptible(&i8042tregs
); /* Sleep if output regs in use. */
179 if (hp_sdc_enqueue_transaction(&t
)) return -1;
181 down_interruptible(&i8042tregs
); /* Sleep until results come back. */
185 ((uint64_t)(tseq
[10]) << 8) | ((uint64_t)(tseq
[15]) << 16) |
186 ((uint64_t)(tseq
[20]) << 24) | ((uint64_t)(tseq
[25]) << 32));
190 /* Read the i8042 real-time clock */
191 static inline int hp_sdc_rtc_read_rt(struct timeval
*res
) {
196 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_RT
, 5);
197 if (raw
< 0) return -1;
199 tenms
= (uint32_t)raw
& 0xffffff;
200 days
= (unsigned int)(raw
>> 24) & 0xffff;
202 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
203 res
->tv_sec
= (time_t)(tenms
/ 100) + days
* 86400;
209 /* Read the i8042 fast handshake timer */
210 static inline int hp_sdc_rtc_read_fhs(struct timeval
*res
) {
214 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_FHS
, 2);
215 if (raw
< 0) return -1;
217 tenms
= (unsigned int)raw
& 0xffff;
219 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
220 res
->tv_sec
= (time_t)(tenms
/ 100);
226 /* Read the i8042 match timer (a.k.a. alarm) */
227 static inline int hp_sdc_rtc_read_mt(struct timeval
*res
) {
231 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_MT
, 3);
232 if (raw
< 0) return -1;
234 tenms
= (uint32_t)raw
& 0xffffff;
236 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
237 res
->tv_sec
= (time_t)(tenms
/ 100);
243 /* Read the i8042 delay timer */
244 static inline int hp_sdc_rtc_read_dt(struct timeval
*res
) {
248 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_DT
, 3);
249 if (raw
< 0) return -1;
251 tenms
= (uint32_t)raw
& 0xffffff;
253 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
254 res
->tv_sec
= (time_t)(tenms
/ 100);
260 /* Read the i8042 cycle timer (a.k.a. periodic) */
261 static inline int hp_sdc_rtc_read_ct(struct timeval
*res
) {
265 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_CT
, 3);
266 if (raw
< 0) return -1;
268 tenms
= (uint32_t)raw
& 0xffffff;
270 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
271 res
->tv_sec
= (time_t)(tenms
/ 100);
277 /* Set the i8042 real-time clock */
278 static int hp_sdc_rtc_set_rt (struct timeval
*setto
)
282 hp_sdc_transaction t
;
284 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
285 HP_SDC_CMD_SET_RTMS
, 3, 0, 0, 0,
286 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
287 HP_SDC_CMD_SET_RTD
, 2, 0, 0
292 if (0xffff < setto
->tv_sec
/ 86400) return -1;
293 days
= setto
->tv_sec
/ 86400;
294 if (0xffff < setto
->tv_usec
/ 1000000 / 86400) return -1;
295 days
+= ((setto
->tv_sec
% 86400) + setto
->tv_usec
/ 1000000) / 86400;
296 if (days
> 0xffff) return -1;
298 if (0xffffff < setto
->tv_sec
) return -1;
299 tenms
= setto
->tv_sec
* 100;
300 if (0xffffff < setto
->tv_usec
/ 10000) return -1;
301 tenms
+= setto
->tv_usec
/ 10000;
302 if (tenms
> 0xffffff) return -1;
304 tseq
[3] = (uint8_t)(tenms
& 0xff);
305 tseq
[4] = (uint8_t)((tenms
>> 8) & 0xff);
306 tseq
[5] = (uint8_t)((tenms
>> 16) & 0xff);
308 tseq
[9] = (uint8_t)(days
& 0xff);
309 tseq
[10] = (uint8_t)((days
>> 8) & 0xff);
313 if (hp_sdc_enqueue_transaction(&t
)) return -1;
317 /* Set the i8042 fast handshake timer */
318 static int hp_sdc_rtc_set_fhs (struct timeval
*setto
)
321 hp_sdc_transaction t
;
323 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
324 HP_SDC_CMD_SET_FHS
, 2, 0, 0
329 if (0xffff < setto
->tv_sec
) return -1;
330 tenms
= setto
->tv_sec
* 100;
331 if (0xffff < setto
->tv_usec
/ 10000) return -1;
332 tenms
+= setto
->tv_usec
/ 10000;
333 if (tenms
> 0xffff) return -1;
335 tseq
[3] = (uint8_t)(tenms
& 0xff);
336 tseq
[4] = (uint8_t)((tenms
>> 8) & 0xff);
340 if (hp_sdc_enqueue_transaction(&t
)) return -1;
345 /* Set the i8042 match timer (a.k.a. alarm) */
346 #define hp_sdc_rtc_set_mt (setto) \
347 hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_MT)
349 /* Set the i8042 delay timer */
350 #define hp_sdc_rtc_set_dt (setto) \
351 hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_DT)
353 /* Set the i8042 cycle timer (a.k.a. periodic) */
354 #define hp_sdc_rtc_set_ct (setto) \
355 hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_CT)
357 /* Set one of the i8042 3-byte wide timers */
358 static int hp_sdc_rtc_set_i8042timer (struct timeval
*setto
, uint8_t setcmd
)
361 hp_sdc_transaction t
;
363 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
369 if (0xffffff < setto
->tv_sec
) return -1;
370 tenms
= setto
->tv_sec
* 100;
371 if (0xffffff < setto
->tv_usec
/ 10000) return -1;
372 tenms
+= setto
->tv_usec
/ 10000;
373 if (tenms
> 0xffffff) return -1;
376 tseq
[3] = (uint8_t)(tenms
& 0xff);
377 tseq
[4] = (uint8_t)((tenms
>> 8) & 0xff);
378 tseq
[5] = (uint8_t)((tenms
>> 16) & 0xff);
382 if (hp_sdc_enqueue_transaction(&t
)) {
388 static ssize_t
hp_sdc_rtc_read(struct file
*file
, char *buf
,
389 size_t count
, loff_t
*ppos
) {
392 if (count
< sizeof(unsigned long))
395 retval
= put_user(68, (unsigned long *)buf
);
399 static unsigned int hp_sdc_rtc_poll(struct file
*file
, poll_table
*wait
)
405 return POLLIN
| POLLRDNORM
;
409 static int hp_sdc_rtc_open(struct inode
*inode
, struct file
*file
)
414 static int hp_sdc_rtc_release(struct inode
*inode
, struct file
*file
)
416 /* Turn off interrupts? */
418 if (file
->f_flags
& FASYNC
) {
419 hp_sdc_rtc_fasync (-1, file
, 0);
425 static int hp_sdc_rtc_fasync (int fd
, struct file
*filp
, int on
)
427 return fasync_helper (fd
, filp
, on
, &hp_sdc_rtc_async_queue
);
430 static int hp_sdc_rtc_proc_output (char *buf
)
432 #define YN(bit) ("no")
433 #define NY(bit) ("yes")
438 memset(&tm
, 0, sizeof(struct rtc_time
));
442 if (hp_sdc_rtc_read_bbrtc(&tm
)) {
443 p
+= sprintf(p
, "BBRTC\t\t: READ FAILED!\n");
446 "rtc_time\t: %02d:%02d:%02d\n"
447 "rtc_date\t: %04d-%02d-%02d\n"
448 "rtc_epoch\t: %04lu\n",
449 tm
.tm_hour
, tm
.tm_min
, tm
.tm_sec
,
450 tm
.tm_year
+ 1900, tm
.tm_mon
+ 1,
454 if (hp_sdc_rtc_read_rt(&tv
)) {
455 p
+= sprintf(p
, "i8042 rtc\t: READ FAILED!\n");
457 p
+= sprintf(p
, "i8042 rtc\t: %ld.%02d seconds\n",
458 tv
.tv_sec
, tv
.tv_usec
/1000);
461 if (hp_sdc_rtc_read_fhs(&tv
)) {
462 p
+= sprintf(p
, "handshake\t: READ FAILED!\n");
464 p
+= sprintf(p
, "handshake\t: %ld.%02d seconds\n",
465 tv
.tv_sec
, tv
.tv_usec
/1000);
468 if (hp_sdc_rtc_read_mt(&tv
)) {
469 p
+= sprintf(p
, "alarm\t\t: READ FAILED!\n");
471 p
+= sprintf(p
, "alarm\t\t: %ld.%02d seconds\n",
472 tv
.tv_sec
, tv
.tv_usec
/1000);
475 if (hp_sdc_rtc_read_dt(&tv
)) {
476 p
+= sprintf(p
, "delay\t\t: READ FAILED!\n");
478 p
+= sprintf(p
, "delay\t\t: %ld.%02d seconds\n",
479 tv
.tv_sec
, tv
.tv_usec
/1000);
482 if (hp_sdc_rtc_read_ct(&tv
)) {
483 p
+= sprintf(p
, "periodic\t: READ FAILED!\n");
485 p
+= sprintf(p
, "periodic\t: %ld.%02d seconds\n",
486 tv
.tv_sec
, tv
.tv_usec
/1000);
493 "square_wave\t: %s\n"
496 "periodic_IRQ\t: %s\n"
497 "periodic_freq\t: %ld\n"
498 "batt_status\t: %s\n",
507 1 ? "okay" : "dead");
514 static int hp_sdc_rtc_read_proc(char *page
, char **start
, off_t off
,
515 int count
, int *eof
, void *data
)
517 int len
= hp_sdc_rtc_proc_output (page
);
518 if (len
<= off
+count
) *eof
= 1;
521 if (len
>count
) len
= count
;
526 static int hp_sdc_rtc_ioctl(struct inode
*inode
, struct file
*file
,
527 unsigned int cmd
, unsigned long arg
)
533 struct rtc_time wtime
;
534 struct timeval ttime
;
537 /* This needs major work. */
541 case RTC_AIE_OFF
: /* Mask alarm int. enab. bit */
542 case RTC_AIE_ON
: /* Allow alarm interrupts. */
543 case RTC_PIE_OFF
: /* Mask periodic int. enab. bit */
544 case RTC_PIE_ON
: /* Allow periodic ints */
545 case RTC_UIE_ON
: /* Allow ints for RTC updates. */
546 case RTC_UIE_OFF
: /* Allow ints for RTC updates. */
548 /* We cannot mask individual user timers and we
549 cannot tell them apart when they occur, so it
550 would be disingenuous to succeed these IOCTLs */
553 case RTC_ALM_READ
: /* Read the present alarm time */
555 if (hp_sdc_rtc_read_mt(&ttime
)) return -EFAULT
;
556 if (hp_sdc_rtc_read_bbrtc(&wtime
)) return -EFAULT
;
558 wtime
.tm_hour
= ttime
.tv_sec
/ 3600; ttime
.tv_sec
%= 3600;
559 wtime
.tm_min
= ttime
.tv_sec
/ 60; ttime
.tv_sec
%= 60;
560 wtime
.tm_sec
= ttime
.tv_sec
;
564 case RTC_IRQP_READ
: /* Read the periodic IRQ rate. */
566 return put_user(hp_sdc_rtc_freq
, (unsigned long *)arg
);
568 case RTC_IRQP_SET
: /* Set periodic IRQ rate. */
571 * The max we can do is 100Hz.
574 if ((arg
< 1) || (arg
> 100)) return -EINVAL
;
576 ttime
.tv_usec
= 1000000 / arg
;
577 if (hp_sdc_rtc_set_ct(&ttime
)) return -EFAULT
;
578 hp_sdc_rtc_freq
= arg
;
581 case RTC_ALM_SET
: /* Store a time into the alarm */
584 * This expects a struct hp_sdc_rtc_time. Writing 0xff means
585 * "don't care" or "match all" for PC timers. The HP SDC
586 * does not support that perk, but it could be emulated fairly
587 * easily. Only the tm_hour, tm_min and tm_sec are used.
588 * We could do it with 10ms accuracy with the HP SDC, if the
589 * rtc interface left us a way to do that.
591 struct hp_sdc_rtc_time alm_tm
;
593 if (copy_from_user(&alm_tm
, (struct hp_sdc_rtc_time
*)arg
,
594 sizeof(struct hp_sdc_rtc_time
)))
597 if (alm_tm
.tm_hour
> 23) return -EINVAL
;
598 if (alm_tm
.tm_min
> 59) return -EINVAL
;
599 if (alm_tm
.tm_sec
> 59) return -EINVAL
;
601 ttime
.sec
= alm_tm
.tm_hour
* 3600 +
602 alm_tm
.tm_min
* 60 + alm_tm
.tm_sec
;
604 if (hp_sdc_rtc_set_mt(&ttime
)) return -EFAULT
;
607 case RTC_RD_TIME
: /* Read the time/date from RTC */
609 if (hp_sdc_rtc_read_bbrtc(&wtime
)) return -EFAULT
;
612 case RTC_SET_TIME
: /* Set the RTC */
614 struct rtc_time hp_sdc_rtc_tm
;
615 unsigned char mon
, day
, hrs
, min
, sec
, leap_yr
;
618 if (!capable(CAP_SYS_TIME
))
620 if (copy_from_user(&hp_sdc_rtc_tm
, (struct rtc_time
*)arg
,
621 sizeof(struct rtc_time
)))
624 yrs
= hp_sdc_rtc_tm
.tm_year
+ 1900;
625 mon
= hp_sdc_rtc_tm
.tm_mon
+ 1; /* tm_mon starts at zero */
626 day
= hp_sdc_rtc_tm
.tm_mday
;
627 hrs
= hp_sdc_rtc_tm
.tm_hour
;
628 min
= hp_sdc_rtc_tm
.tm_min
;
629 sec
= hp_sdc_rtc_tm
.tm_sec
;
634 leap_yr
= ((!(yrs
% 4) && (yrs
% 100)) || !(yrs
% 400));
636 if ((mon
> 12) || (day
== 0))
638 if (day
> (days_in_mo
[mon
] + ((mon
== 2) && leap_yr
)))
640 if ((hrs
>= 24) || (min
>= 60) || (sec
>= 60))
643 if ((yrs
-= eH
) > 255) /* They are unsigned */
649 case RTC_EPOCH_READ
: /* Read the epoch. */
651 return put_user (epoch
, (unsigned long *)arg
);
653 case RTC_EPOCH_SET
: /* Set the epoch. */
656 * There were no RTC clocks before 1900.
660 if (!capable(CAP_SYS_TIME
))
669 return copy_to_user((void *)arg
, &wtime
, sizeof wtime
) ? -EFAULT
: 0;
673 static struct file_operations hp_sdc_rtc_fops
= {
674 .owner
= THIS_MODULE
,
676 .read
= hp_sdc_rtc_read
,
677 .poll
= hp_sdc_rtc_poll
,
678 .ioctl
= hp_sdc_rtc_ioctl
,
679 .open
= hp_sdc_rtc_open
,
680 .release
= hp_sdc_rtc_release
,
681 .fasync
= hp_sdc_rtc_fasync
,
684 static struct miscdevice hp_sdc_rtc_dev
= {
687 .fops
= &hp_sdc_rtc_fops
690 static int __init
hp_sdc_rtc_init(void)
694 init_MUTEX(&i8042tregs
);
696 if ((ret
= hp_sdc_request_timer_irq(&hp_sdc_rtc_isr
)))
698 misc_register(&hp_sdc_rtc_dev
);
699 create_proc_read_entry ("driver/rtc", 0, 0,
700 hp_sdc_rtc_read_proc
, NULL
);
702 printk(KERN_INFO
"HP i8042 SDC + MSM-58321 RTC support loaded "
703 "(RTC v " RTC_VERSION
")\n");
708 static void __exit
hp_sdc_rtc_exit(void)
710 remove_proc_entry ("driver/rtc", NULL
);
711 misc_deregister(&hp_sdc_rtc_dev
);
712 hp_sdc_release_timer_irq(hp_sdc_rtc_isr
);
713 printk(KERN_INFO
"HP i8042 SDC + MSM-58321 RTC support unloaded\n");
716 module_init(hp_sdc_rtc_init
);
717 module_exit(hp_sdc_rtc_exit
);