drivers/usb/host/ehci-pci.c

   1 /*
   2  * EHCI HCD (Host Controller Driver) PCI Bus Glue.
   3  *
   4  * Copyright (c) 2000-2004 by David Brownell
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License as published by the
   8  * Free Software Foundation; either version 2 of the License, or (at your
   9  * option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful, but
  12  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  13  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  14  * for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software Foundation,
  18  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19  */
  20
  21 #ifndef CONFIG_PCI
  22 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
  23 #endif
  24
  25 /*-------------------------------------------------------------------------*/
  26
  27 /* called after powerup, by probe or system-pm "wakeup" */
  28 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
  29 {
  30         u32                     temp;
  31         int                     retval;
  32
  33         /* optional debug port, normally in the first BAR */
  34         temp = pci_find_capability(pdev, 0x0a);
  35         if (temp) {
  36                 pci_read_config_dword(pdev, temp, &temp);
  37                 temp >>= 16;
  38                 if ((temp & (3 << 13)) == (1 << 13)) {
  39                         temp &= 0x1fff;
  40                         ehci->debug = ehci_to_hcd(ehci)->regs + temp;
  41                         temp = readl(&ehci->debug->control);
  42                         ehci_info(ehci, "debug port %d%s\n",
  43                                 HCS_DEBUG_PORT(ehci->hcs_params),
  44                                 (temp & DBGP_ENABLED)
  45                                         ? " IN USE"
  46                                         : "");
  47                         if (!(temp & DBGP_ENABLED))
  48                                 ehci->debug = NULL;
  49                 }
  50         }
  51
  52         /* we expect static quirk code to handle the "extended capabilities"
  53          * (currently just BIOS handoff) allowed starting with EHCI 0.96
  54          */
  55
  56         /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
  57         retval = pci_set_mwi(pdev);
  58         if (!retval)
  59                 ehci_dbg(ehci, "MWI active\n");
  60
  61         ehci_port_power(ehci, 0);
  62
  63         return 0;
  64 }
  65
  66 /* called during probe() after chip reset completes */
  67 static int ehci_pci_setup(struct usb_hcd *hcd)
  68 {
  69         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
  70         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
  71         u32                     temp;
  72         int                     retval;
  73
  74         ehci->caps = hcd->regs;
  75         ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
  76         dbg_hcs_params(ehci, "reset");
  77         dbg_hcc_params(ehci, "reset");
  78
  79         /* ehci_init() causes memory for DMA transfers to be
  80          * allocated.  Thus, any vendor-specific workarounds based on
  81          * limiting the type of memory used for DMA transfers must
  82          * happen before ehci_init() is called. */
  83         switch (pdev->vendor) {
  84         case PCI_VENDOR_ID_NVIDIA:
  85                 /* NVidia reports that certain chips don't handle
  86                  * QH, ITD, or SITD addresses above 2GB.  (But TD,
  87                  * data buffer, and periodic schedule are normal.)
  88                  */
  89                 switch (pdev->device) {
  90                 case 0x003c:    /* MCP04 */
  91                 case 0x005b:    /* CK804 */
  92                 case 0x00d8:    /* CK8 */
  93                 case 0x00e8:    /* CK8S */
  94                         if (pci_set_consistent_dma_mask(pdev,
  95                                                 DMA_31BIT_MASK) < 0)
  96                                 ehci_warn(ehci, "can't enable NVidia "
  97                                         "workaround for >2GB RAM\n");
  98                         break;
  99                 }
 100                 break;
 101         }
 102
 103         /* cache this readonly data; minimize chip reads */
 104         ehci->hcs_params = readl(&ehci->caps->hcs_params);
 105
 106         retval = ehci_halt(ehci);
 107         if (retval)
 108                 return retval;
 109
 110         /* data structure init */
 111         retval = ehci_init(hcd);
 112         if (retval)
 113                 return retval;
 114
 115         switch (pdev->vendor) {
 116         case PCI_VENDOR_ID_TDI:
 117                 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
 118                         ehci->is_tdi_rh_tt = 1;
 119                         tdi_reset(ehci);
 120                 }
 121                 break;
 122         case PCI_VENDOR_ID_AMD:
 123                 /* AMD8111 EHCI doesn't work, according to AMD errata */
 124                 if (pdev->device == 0x7463) {
 125                         ehci_info(ehci, "ignoring AMD8111 (errata)\n");
 126                         retval = -EIO;
 127                         goto done;
 128                 }
 129                 break;
 130         case PCI_VENDOR_ID_NVIDIA:
 131                 switch (pdev->device) {
 132                 /* Some NForce2 chips have problems with selective suspend;
 133                  * fixed in newer silicon.
 134                  */
 135                 case 0x0068:
 136                         pci_read_config_dword(pdev, PCI_REVISION_ID, &temp);
 137                         if ((temp & 0xff) < 0xa4)
 138                                 ehci->no_selective_suspend = 1;
 139                         break;
 140                 }
 141                 break;
 142         }
 143
 144         if (ehci_is_TDI(ehci))
 145                 ehci_reset(ehci);
 146
 147         /* at least the Genesys GL880S needs fixup here */
 148         temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
 149         temp &= 0x0f;
 150         if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
 151                 ehci_dbg(ehci, "bogus port configuration: "
 152                         "cc=%d x pcc=%d < ports=%d\n",
 153                         HCS_N_CC(ehci->hcs_params),
 154                         HCS_N_PCC(ehci->hcs_params),
 155                         HCS_N_PORTS(ehci->hcs_params));
 156
 157                 switch (pdev->vendor) {
 158                 case 0x17a0:            /* GENESYS */
 159                         /* GL880S: should be PORTS=2 */
 160                         temp |= (ehci->hcs_params & ~0xf);
 161                         ehci->hcs_params = temp;
 162                         break;
 163                 case PCI_VENDOR_ID_NVIDIA:
 164                         /* NF4: should be PCC=10 */
 165                         break;
 166                 }
 167         }
 168
 169         /* Serial Bus Release Number is at PCI 0x60 offset */
 170         pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
 171
 172         /* Workaround current PCI init glitch:  wakeup bits aren't
 173          * being set from PCI PM capability.
 174          */
 175         if (!device_can_wakeup(&pdev->dev)) {
 176                 u16     port_wake;
 177
 178                 pci_read_config_word(pdev, 0x62, &port_wake);
 179                 if (port_wake & 0x0001)
 180                         device_init_wakeup(&pdev->dev, 1);
 181         }
 182
 183 #ifdef  CONFIG_USB_SUSPEND
 184         /* REVISIT: the controller works fine for wakeup iff the root hub
 185          * itself is "globally" suspended, but usbcore currently doesn't
 186          * understand such things.
 187          *
 188          * System suspend currently expects to be able to suspend the entire
 189          * device tree, device-at-a-time.  If we failed selective suspend
 190          * reports, system suspend would fail; so the root hub code must claim
 191          * success.  That's lying to usbcore, and it matters for for runtime
 192          * PM scenarios with selective suspend and remote wakeup...
 193          */
 194         if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
 195                 ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
 196 #endif
 197
 198         retval = ehci_pci_reinit(ehci, pdev);
 199 done:
 200         return retval;
 201 }
 202
 203 /*-------------------------------------------------------------------------*/
 204
 205 #ifdef  CONFIG_PM
 206
 207 /* suspend/resume, section 4.3 */
 208
 209 /* These routines rely on the PCI bus glue
 210  * to handle powerdown and wakeup, and currently also on
 211  * transceivers that don't need any software attention to set up
 212  * the right sort of wakeup.
 213  * Also they depend on separate root hub suspend/resume.
 214  */
 215
 216 static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 217 {
 218         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 219         unsigned long           flags;
 220         int                     rc = 0;
 221
 222         if (time_before(jiffies, ehci->next_statechange))
 223                 msleep(10);
 224
 225         /* Root hub was already suspended. Disable irq emission and
 226          * mark HW unaccessible, bail out if RH has been resumed. Use
 227          * the spinlock to properly synchronize with possible pending
 228          * RH suspend or resume activity.
 229          *
 230          * This is still racy as hcd->state is manipulated outside of
 231          * any locks =P But that will be a different fix.
 232          */
 233         spin_lock_irqsave (&ehci->lock, flags);
 234         if (hcd->state != HC_STATE_SUSPENDED) {
 235                 rc = -EINVAL;
 236                 goto bail;
 237         }
 238         writel (0, &ehci->regs->intr_enable);
 239         (void)readl(&ehci->regs->intr_enable);
 240
 241         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 242  bail:
 243         spin_unlock_irqrestore (&ehci->lock, flags);
 244
 245         // could save FLADJ in case of Vaux power loss
 246         // ... we'd only use it to handle clock skew
 247
 248         return rc;
 249 }
 250
 251 static int ehci_pci_resume(struct usb_hcd *hcd)
 252 {
 253         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 254         unsigned                port;
 255         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 256         int                     retval = -EINVAL;
 257
 258         // maybe restore FLADJ
 259
 260         if (time_before(jiffies, ehci->next_statechange))
 261                 msleep(100);
 262
 263         /* Mark hardware accessible again as we are out of D3 state by now */
 264         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 265
 266         /* If CF is clear, we lost PCI Vaux power and need to restart.  */
 267         if (readl(&ehci->regs->configured_flag) != FLAG_CF)
 268                 goto restart;
 269
 270         /* If any port is suspended (or owned by the companion),
 271          * we know we can/must resume the HC (and mustn't reset it).
 272          * We just defer that to the root hub code.
 273          */
 274         for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
 275                 u32     status;
 276                 port--;
 277                 status = readl(&ehci->regs->port_status [port]);
 278                 if (!(status & PORT_POWER))
 279                         continue;
 280                 if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
 281                         usb_hcd_resume_root_hub(hcd);
 282                         return 0;
 283                 }
 284         }
 285
 286 restart:
 287         ehci_dbg(ehci, "lost power, restarting\n");
 288         usb_root_hub_lost_power(hcd->self.root_hub);
 289
 290         /* Else reset, to cope with power loss or flush-to-storage
 291          * style "resume" having let BIOS kick in during reboot.
 292          */
 293         (void) ehci_halt(ehci);
 294         (void) ehci_reset(ehci);
 295         (void) ehci_pci_reinit(ehci, pdev);
 296
 297         /* emptying the schedule aborts any urbs */
 298         spin_lock_irq(&ehci->lock);
 299         if (ehci->reclaim)
 300                 ehci->reclaim_ready = 1;
 301         ehci_work(ehci, NULL);
 302         spin_unlock_irq(&ehci->lock);
 303
 304         /* restart; khubd will disconnect devices */
 305         retval = ehci_run(hcd);
 306
 307         /* here we "know" root ports should always stay powered */
 308         ehci_port_power(ehci, 1);
 309
 310         return retval;
 311 }
 312 #endif
 313
 314 static const struct hc_driver ehci_pci_hc_driver = {
 315         .description =          hcd_name,
 316         .product_desc =         "EHCI Host Controller",
 317         .hcd_priv_size =        sizeof(struct ehci_hcd),
 318
 319         /*
 320          * generic hardware linkage
 321          */
 322         .irq =                  ehci_irq,
 323         .flags =                HCD_MEMORY | HCD_USB2,
 324
 325         /*
 326          * basic lifecycle operations
 327          */
 328         .reset =                ehci_pci_setup,
 329         .start =                ehci_run,
 330 #ifdef  CONFIG_PM
 331         .suspend =              ehci_pci_suspend,
 332         .resume =               ehci_pci_resume,
 333 #endif
 334         .stop =                 ehci_stop,
 335
 336         /*
 337          * managing i/o requests and associated device resources
 338          */
 339         .urb_enqueue =          ehci_urb_enqueue,
 340         .urb_dequeue =          ehci_urb_dequeue,
 341         .endpoint_disable =     ehci_endpoint_disable,
 342
 343         /*
 344          * scheduling support
 345          */
 346         .get_frame_number =     ehci_get_frame,
 347
 348         /*
 349          * root hub support
 350          */
 351         .hub_status_data =      ehci_hub_status_data,
 352         .hub_control =          ehci_hub_control,
 353         .bus_suspend =          ehci_bus_suspend,
 354         .bus_resume =           ehci_bus_resume,
 355 };
 356
 357 /*-------------------------------------------------------------------------*/
 358
 359 /* PCI driver selection metadata; PCI hotplugging uses this */
 360 static const struct pci_device_id pci_ids [] = { {
 361         /* handle any USB 2.0 EHCI controller */
 362         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 363         .driver_data =  (unsigned long) &ehci_pci_hc_driver,
 364         },
 365         { /* end: all zeroes */ }
 366 };
 367 MODULE_DEVICE_TABLE(pci, pci_ids);
 368
 369 /* pci driver glue; this is a "new style" PCI driver module */
 370 static struct pci_driver ehci_pci_driver = {
 371         .name =         (char *) hcd_name,
 372         .id_table =     pci_ids,
 373
 374         .probe =        usb_hcd_pci_probe,
 375         .remove =       usb_hcd_pci_remove,
 376
 377 #ifdef  CONFIG_PM
 378         .suspend =      usb_hcd_pci_suspend,
 379         .resume =       usb_hcd_pci_resume,
 380 #endif
 381 };