V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups
[linux-2.6/verdex.git] / drivers / media / dvb / b2c2 / flexcop-fe-tuner.c
blob9c7f122826e0089d9931402be70ddedf18c2e436
1 /*
2 * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
6 * see flexcop.c for copyright information.
7 */
8 #include "flexcop.h"
10 #include "stv0299.h"
11 #include "mt352.h"
12 #include "nxt200x.h"
13 #include "bcm3510.h"
14 #include "stv0297.h"
15 #include "mt312.h"
16 #include "lgdt330x.h"
17 #include "dvb-pll.h"
19 /* lnb control */
21 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
23 struct flexcop_device *fc = fe->dvb->priv;
24 flexcop_ibi_value v;
25 deb_tuner("polarity/voltage = %u\n", voltage);
27 v = fc->read_ibi_reg(fc, misc_204);
28 switch (voltage) {
29 case SEC_VOLTAGE_OFF:
30 v.misc_204.ACPI1_sig = 1;
31 break;
32 case SEC_VOLTAGE_13:
33 v.misc_204.ACPI1_sig = 0;
34 v.misc_204.LNB_L_H_sig = 0;
35 break;
36 case SEC_VOLTAGE_18:
37 v.misc_204.ACPI1_sig = 0;
38 v.misc_204.LNB_L_H_sig = 1;
39 break;
40 default:
41 err("unknown SEC_VOLTAGE value");
42 return -EINVAL;
44 return fc->write_ibi_reg(fc, misc_204, v);
47 static int flexcop_sleep(struct dvb_frontend* fe)
49 struct flexcop_device *fc = fe->dvb->priv;
50 /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
52 if (fc->fe_sleep)
53 return fc->fe_sleep(fe);
55 /* v.misc_204.ACPI3_sig = 1;
56 fc->write_ibi_reg(fc,misc_204,v);*/
58 return 0;
61 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
63 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
64 struct flexcop_device *fc = fe->dvb->priv;
65 flexcop_ibi_value v;
66 u16 ax;
67 v.raw = 0;
69 deb_tuner("tone = %u\n",tone);
71 switch (tone) {
72 case SEC_TONE_ON:
73 ax = 0x01ff;
74 break;
75 case SEC_TONE_OFF:
76 ax = 0;
77 break;
78 default:
79 err("unknown SEC_TONE value");
80 return -EINVAL;
83 v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
85 v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
86 v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
88 return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
91 static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
93 flexcop_set_tone(fe, SEC_TONE_ON);
94 udelay(data ? 500 : 1000);
95 flexcop_set_tone(fe, SEC_TONE_OFF);
96 udelay(data ? 1000 : 500);
99 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
101 int i, par = 1, d;
103 for (i = 7; i >= 0; i--) {
104 d = (data >> i) & 1;
105 par ^= d;
106 flexcop_diseqc_send_bit(fe, d);
109 flexcop_diseqc_send_bit(fe, par);
112 static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
114 int i;
116 flexcop_set_tone(fe, SEC_TONE_OFF);
117 mdelay(16);
119 for (i = 0; i < len; i++)
120 flexcop_diseqc_send_byte(fe,msg[i]);
122 mdelay(16);
124 if (burst != -1) {
125 if (burst)
126 flexcop_diseqc_send_byte(fe, 0xff);
127 else {
128 flexcop_set_tone(fe, SEC_TONE_ON);
129 udelay(12500);
130 flexcop_set_tone(fe, SEC_TONE_OFF);
132 msleep(20);
134 return 0;
137 static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
139 return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
142 static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
144 return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
147 /* dvb-s stv0299 */
148 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
150 u8 aclk = 0;
151 u8 bclk = 0;
153 if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
154 else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
155 else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
156 else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
157 else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
158 else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
160 stv0299_writereg (fe, 0x13, aclk);
161 stv0299_writereg (fe, 0x14, bclk);
162 stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
163 stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
164 stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
166 return 0;
169 static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
171 u8 buf[4];
172 u32 div;
173 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
175 div = params->frequency / 125;
177 buf[0] = (div >> 8) & 0x7f;
178 buf[1] = div & 0xff;
179 buf[2] = 0x84; /* 0xC4 */
180 buf[3] = 0x08;
182 if (params->frequency < 1500000) buf[3] |= 0x10;
184 if (i2c_transfer(i2c, &msg, 1) != 1)
185 return -EIO;
186 return 0;
189 static u8 samsung_tbmu24112_inittab[] = {
190 0x01, 0x15,
191 0x02, 0x30,
192 0x03, 0x00,
193 0x04, 0x7D,
194 0x05, 0x35,
195 0x06, 0x02,
196 0x07, 0x00,
197 0x08, 0xC3,
198 0x0C, 0x00,
199 0x0D, 0x81,
200 0x0E, 0x23,
201 0x0F, 0x12,
202 0x10, 0x7E,
203 0x11, 0x84,
204 0x12, 0xB9,
205 0x13, 0x88,
206 0x14, 0x89,
207 0x15, 0xC9,
208 0x16, 0x00,
209 0x17, 0x5C,
210 0x18, 0x00,
211 0x19, 0x00,
212 0x1A, 0x00,
213 0x1C, 0x00,
214 0x1D, 0x00,
215 0x1E, 0x00,
216 0x1F, 0x3A,
217 0x20, 0x2E,
218 0x21, 0x80,
219 0x22, 0xFF,
220 0x23, 0xC1,
221 0x28, 0x00,
222 0x29, 0x1E,
223 0x2A, 0x14,
224 0x2B, 0x0F,
225 0x2C, 0x09,
226 0x2D, 0x05,
227 0x31, 0x1F,
228 0x32, 0x19,
229 0x33, 0xFE,
230 0x34, 0x93,
231 0xff, 0xff,
234 static struct stv0299_config samsung_tbmu24112_config = {
235 .demod_address = 0x68,
236 .inittab = samsung_tbmu24112_inittab,
237 .mclk = 88000000UL,
238 .invert = 0,
239 .skip_reinit = 0,
240 .lock_output = STV0229_LOCKOUTPUT_LK,
241 .volt13_op0_op1 = STV0299_VOLT13_OP1,
242 .min_delay_ms = 100,
243 .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
244 .pll_set = samsung_tbmu24112_pll_set,
247 /* dvb-t mt352 */
248 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
250 static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
251 static u8 mt352_reset [] = { 0x50, 0x80 };
252 static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
253 static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
254 static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
256 mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
257 udelay(2000);
258 mt352_write(fe, mt352_reset, sizeof(mt352_reset));
259 mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
261 mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
262 mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
264 return 0;
267 static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
269 u32 div;
270 unsigned char bs = 0;
272 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
273 div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
275 if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
276 if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
277 if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
279 pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
280 pllbuf[1] = div >> 8;
281 pllbuf[2] = div & 0xff;
282 pllbuf[3] = 0xcc;
283 pllbuf[4] = bs;
285 return 0;
288 static struct mt352_config samsung_tdtc9251dh0_config = {
289 .demod_address = 0x0f,
290 .demod_init = samsung_tdtc9251dh0_demod_init,
291 .pll_set = samsung_tdtc9251dh0_pll_set,
294 static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
296 struct flexcop_device *fc = fe->dvb->priv;
297 return request_firmware(fw, name, fc->dev);
300 static int lgdt3303_pll_set(struct dvb_frontend* fe,
301 struct dvb_frontend_parameters* params)
303 struct flexcop_device *fc = fe->dvb->priv;
304 u8 buf[4];
305 struct i2c_msg msg =
306 { .addr = 0x61, .flags = 0, .buf = buf, .len = 4 };
307 int err;
309 dvb_pll_configure(&dvb_pll_tdvs_tua6034,buf, params->frequency, 0);
310 dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
311 __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
312 if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) {
313 printk(KERN_WARNING "lgdt3303: %s error "
314 "(addr %02x <- %02x, err = %i)\n",
315 __FUNCTION__, buf[0], buf[1], err);
316 if (err < 0)
317 return err;
318 else
319 return -EREMOTEIO;
322 buf[0] = 0x86 | 0x18;
323 buf[1] = 0x50;
324 msg.len = 2;
325 if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) {
326 printk(KERN_WARNING "lgdt3303: %s error "
327 "(addr %02x <- %02x, err = %i)\n",
328 __FUNCTION__, buf[0], buf[1], err);
329 if (err < 0)
330 return err;
331 else
332 return -EREMOTEIO;
335 return 0;
338 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
339 .demod_address = 0x59,
340 .demod_chip = LGDT3303,
341 .serial_mpeg = 0x04,
342 .pll_set = lgdt3303_pll_set,
343 .clock_polarity_flip = 1,
346 static struct nxt200x_config samsung_tbmv_config = {
347 .demod_address = 0x0a,
348 .pll_address = 0xc2,
349 .pll_desc = &dvb_pll_samsung_tbmv,
352 static struct bcm3510_config air2pc_atsc_first_gen_config = {
353 .demod_address = 0x0f,
354 .request_firmware = flexcop_fe_request_firmware,
357 static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
359 u8 buf[4];
360 u32 div;
361 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
362 struct flexcop_device *fc = fe->dvb->priv;
364 div = (params->frequency + (125/2)) / 125;
366 buf[0] = (div >> 8) & 0x7f;
367 buf[1] = (div >> 0) & 0xff;
368 buf[2] = 0x84 | ((div >> 10) & 0x60);
369 buf[3] = 0x80;
371 if (params->frequency < 1550000)
372 buf[3] |= 0x02;
374 if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
375 return -EIO;
376 return 0;
379 static struct mt312_config skystar23_samsung_tbdu18132_config = {
381 .demod_address = 0x0e,
382 .pll_set = skystar23_samsung_tbdu18132_pll_set,
386 static u8 alps_tdee4_stv0297_inittab[] = {
387 0x80, 0x01,
388 0x80, 0x00,
389 0x81, 0x01,
390 0x81, 0x00,
391 0x00, 0x09,
392 0x01, 0x69,
393 0x03, 0x00,
394 0x04, 0x00,
395 0x07, 0x00,
396 0x08, 0x00,
397 0x20, 0x00,
398 0x21, 0x40,
399 0x22, 0x00,
400 0x23, 0x00,
401 0x24, 0x40,
402 0x25, 0x88,
403 0x30, 0xff,
404 0x31, 0x00,
405 0x32, 0xff,
406 0x33, 0x00,
407 0x34, 0x50,
408 0x35, 0x7f,
409 0x36, 0x00,
410 0x37, 0x20,
411 0x38, 0x00,
412 0x40, 0x1c,
413 0x41, 0xff,
414 0x42, 0x29,
415 0x43, 0x00,
416 0x44, 0xff,
417 0x45, 0x00,
418 0x46, 0x00,
419 0x49, 0x04,
420 0x4a, 0x00,
421 0x4b, 0xf8,
422 0x52, 0x30,
423 0x55, 0xae,
424 0x56, 0x47,
425 0x57, 0xe1,
426 0x58, 0x3a,
427 0x5a, 0x1e,
428 0x5b, 0x34,
429 0x60, 0x00,
430 0x63, 0x00,
431 0x64, 0x00,
432 0x65, 0x00,
433 0x66, 0x00,
434 0x67, 0x00,
435 0x68, 0x00,
436 0x69, 0x00,
437 0x6a, 0x02,
438 0x6b, 0x00,
439 0x70, 0xff,
440 0x71, 0x00,
441 0x72, 0x00,
442 0x73, 0x00,
443 0x74, 0x0c,
444 0x80, 0x00,
445 0x81, 0x00,
446 0x82, 0x00,
447 0x83, 0x00,
448 0x84, 0x04,
449 0x85, 0x80,
450 0x86, 0x24,
451 0x87, 0x78,
452 0x88, 0x10,
453 0x89, 0x00,
454 0x90, 0x01,
455 0x91, 0x01,
456 0xa0, 0x04,
457 0xa1, 0x00,
458 0xa2, 0x00,
459 0xb0, 0x91,
460 0xb1, 0x0b,
461 0xc0, 0x53,
462 0xc1, 0x70,
463 0xc2, 0x12,
464 0xd0, 0x00,
465 0xd1, 0x00,
466 0xd2, 0x00,
467 0xd3, 0x00,
468 0xd4, 0x00,
469 0xd5, 0x00,
470 0xde, 0x00,
471 0xdf, 0x00,
472 0x61, 0x49,
473 0x62, 0x0b,
474 0x53, 0x08,
475 0x59, 0x08,
476 0xff, 0xff,
479 static struct stv0297_config alps_tdee4_stv0297_config = {
480 .demod_address = 0x1c,
481 .inittab = alps_tdee4_stv0297_inittab,
482 // .invert = 1,
483 // .pll_set = alps_tdee4_stv0297_pll_set,
486 /* try to figure out the frontend, each card/box can have on of the following list */
487 int flexcop_frontend_init(struct flexcop_device *fc)
489 struct dvb_frontend_ops *ops;
491 /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
492 if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
493 ops = fc->fe->ops;
495 ops->set_voltage = flexcop_set_voltage;
497 fc->fe_sleep = ops->sleep;
498 ops->sleep = flexcop_sleep;
500 fc->dev_type = FC_SKY;
501 info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
502 } else
503 /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
504 if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
505 fc->dev_type = FC_AIR_DVB;
506 info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
507 } else
508 /* try the air atsc 2nd generation (nxt2002) */
509 if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
510 fc->dev_type = FC_AIR_ATSC2;
511 info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
512 } else
513 /* try the air atsc 3nd generation (lgdt3303) */
514 if ((fc->fe = lgdt330x_attach(&air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
515 fc->dev_type = FC_AIR_ATSC3;
516 info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
517 } else
518 /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
519 if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
520 fc->dev_type = FC_AIR_ATSC1;
521 info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
522 } else
523 /* try the cable dvb (stv0297) */
524 if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) {
525 fc->dev_type = FC_CABLE;
526 info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
527 } else
528 /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
529 if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
530 ops = fc->fe->ops;
532 ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
533 ops->diseqc_send_burst = flexcop_diseqc_send_burst;
534 ops->set_tone = flexcop_set_tone;
535 ops->set_voltage = flexcop_set_voltage;
537 fc->fe_sleep = ops->sleep;
538 ops->sleep = flexcop_sleep;
540 fc->dev_type = FC_SKY_OLD;
541 info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
544 if (fc->fe == NULL) {
545 err("no frontend driver found for this B2C2/FlexCop adapter");
546 return -ENODEV;
547 } else {
548 if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
549 err("frontend registration failed!");
550 ops = fc->fe->ops;
551 if (ops->release != NULL)
552 ops->release(fc->fe);
553 fc->fe = NULL;
554 return -EINVAL;
557 fc->init_state |= FC_STATE_FE_INIT;
558 return 0;
561 void flexcop_frontend_exit(struct flexcop_device *fc)
563 if (fc->init_state & FC_STATE_FE_INIT)
564 dvb_unregister_frontend(fc->fe);
566 fc->init_state &= ~FC_STATE_FE_INIT;