include/asm-powerpc/irq.h

   1 #ifdef __KERNEL__
   2 #ifndef _ASM_POWERPC_IRQ_H
   3 #define _ASM_POWERPC_IRQ_H
   4
   5 /*
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 #include <linux/threads.h>
  13
  14 #include <asm/types.h>
  15 #include <asm/atomic.h>
  16
  17 /* this number is used when no interrupt has been assigned */
  18 #define NO_IRQ                  (-1)
  19
  20 /*
  21  * These constants are used for passing information about interrupt
  22  * signal polarity and level/edge sensing to the low-level PIC chip
  23  * drivers.
  24  */
  25 #define IRQ_SENSE_MASK          0x1
  26 #define IRQ_SENSE_LEVEL         0x1     /* interrupt on active level */
  27 #define IRQ_SENSE_EDGE          0x0     /* interrupt triggered by edge */
  28
  29 #define IRQ_POLARITY_MASK       0x2
  30 #define IRQ_POLARITY_POSITIVE   0x2     /* high level or low->high edge */
  31 #define IRQ_POLARITY_NEGATIVE   0x0     /* low level or high->low edge */
  32
  33 #define get_irq_desc(irq) (&irq_desc[(irq)])
  34
  35 /* Define a way to iterate across irqs. */
  36 #define for_each_irq(i) \
  37         for ((i) = 0; (i) < NR_IRQS; ++(i))
  38
  39 #ifdef CONFIG_PPC64
  40
  41 /*
  42  * Maximum number of interrupt sources that we can handle.
  43  */
  44 #define NR_IRQS         512
  45
  46 /* Interrupt numbers are virtual in case they are sparsely
  47  * distributed by the hardware.
  48  */
  49 extern unsigned int virt_irq_to_real_map[NR_IRQS];
  50
  51 /* The maximum virtual IRQ number that we support.  This
  52  * can be set by the platform and will be reduced by the
  53  * value of __irq_offset_value.  It defaults to and is
  54  * capped by (NR_IRQS - 1).
  55  */
  56 extern unsigned int virt_irq_max;
  57
  58 /* Create a mapping for a real_irq if it doesn't already exist.
  59  * Return the virtual irq as a convenience.
  60  */
  61 int virt_irq_create_mapping(unsigned int real_irq);
  62 void virt_irq_init(void);
  63
  64 static inline unsigned int virt_irq_to_real(unsigned int virt_irq)
  65 {
  66         return virt_irq_to_real_map[virt_irq];
  67 }
  68
  69 extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq);
  70
  71 /*
  72  * List of interrupt controllers.
  73  */
  74 #define IC_INVALID    0
  75 #define IC_OPEN_PIC   1
  76 #define IC_PPC_XIC    2
  77 #define IC_CELL_PIC   3
  78 #define IC_ISERIES    4
  79
  80 extern u64 ppc64_interrupt_controller;
  81
  82 #else /* 32-bit */
  83
  84 #if defined(CONFIG_40x)
  85 #include <asm/ibm4xx.h>
  86
  87 #ifndef NR_BOARD_IRQS
  88 #define NR_BOARD_IRQS 0
  89 #endif
  90
  91 #ifndef UIC_WIDTH /* Number of interrupts per device */
  92 #define UIC_WIDTH 32
  93 #endif
  94
  95 #ifndef NR_UICS /* number  of UIC devices */
  96 #define NR_UICS 1
  97 #endif
  98
  99 #if defined (CONFIG_403)
 100 /*
 101  * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
 102  * 32 possible interrupts, a majority of which are not implemented on
 103  * all cores. There are six configurable, external interrupt pins and
 104  * there are eight internal interrupts for the on-chip serial port
 105  * (SPU), DMA controller, and JTAG controller.
 106  *
 107  */
 108
 109 #define NR_AIC_IRQS 32
 110 #define NR_IRQS  (NR_AIC_IRQS + NR_BOARD_IRQS)
 111
 112 #elif !defined (CONFIG_403)
 113
 114 /*
 115  *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
 116  * possible interrupts as well. There are seven, configurable external
 117  * interrupt pins and there are 17 internal interrupts for the on-chip
 118  * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
 119  *
 120  */
 121
 122
 123 #define NR_UIC_IRQS UIC_WIDTH
 124 #define NR_IRQS         ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
 125 #endif
 126
 127 #elif defined(CONFIG_44x)
 128 #include <asm/ibm44x.h>
 129
 130 #define NR_UIC_IRQS     32
 131 #define NR_IRQS         ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
 132
 133 #elif defined(CONFIG_8xx)
 134
 135 /* Now include the board configuration specific associations.
 136 */
 137 #include <asm/mpc8xx.h>
 138
 139 /* The MPC8xx cores have 16 possible interrupts.  There are eight
 140  * possible level sensitive interrupts assigned and generated internally
 141  * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
 142  * There are eight external interrupts (IRQs) that can be configured
 143  * as either level or edge sensitive.
 144  *
 145  * On some implementations, there is also the possibility of an 8259
 146  * through the PCI and PCI-ISA bridges.
 147  *
 148  * We are "flattening" the interrupt vectors of the cascaded CPM
 149  * and 8259 interrupt controllers so that we can uniquely identify
 150  * any interrupt source with a single integer.
 151  */
 152 #define NR_SIU_INTS     16
 153 #define NR_CPM_INTS     32
 154 #ifndef NR_8259_INTS
 155 #define NR_8259_INTS 0
 156 #endif
 157
 158 #define SIU_IRQ_OFFSET          0
 159 #define CPM_IRQ_OFFSET          (SIU_IRQ_OFFSET + NR_SIU_INTS)
 160 #define I8259_IRQ_OFFSET        (CPM_IRQ_OFFSET + NR_CPM_INTS)
 161
 162 #define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
 163
 164 /* These values must be zero-based and map 1:1 with the SIU configuration.
 165  * They are used throughout the 8xx I/O subsystem to generate
 166  * interrupt masks, flags, and other control patterns.  This is why the
 167  * current kernel assumption of the 8259 as the base controller is such
 168  * a pain in the butt.
 169  */
 170 #define SIU_IRQ0        (0)     /* Highest priority */
 171 #define SIU_LEVEL0      (1)
 172 #define SIU_IRQ1        (2)
 173 #define SIU_LEVEL1      (3)
 174 #define SIU_IRQ2        (4)
 175 #define SIU_LEVEL2      (5)
 176 #define SIU_IRQ3        (6)
 177 #define SIU_LEVEL3      (7)
 178 #define SIU_IRQ4        (8)
 179 #define SIU_LEVEL4      (9)
 180 #define SIU_IRQ5        (10)
 181 #define SIU_LEVEL5      (11)
 182 #define SIU_IRQ6        (12)
 183 #define SIU_LEVEL6      (13)
 184 #define SIU_IRQ7        (14)
 185 #define SIU_LEVEL7      (15)
 186
 187 #define MPC8xx_INT_FEC1         SIU_LEVEL1
 188 #define MPC8xx_INT_FEC2         SIU_LEVEL3
 189
 190 #define MPC8xx_INT_SCC1         (CPM_IRQ_OFFSET + CPMVEC_SCC1)
 191 #define MPC8xx_INT_SCC2         (CPM_IRQ_OFFSET + CPMVEC_SCC2)
 192 #define MPC8xx_INT_SCC3         (CPM_IRQ_OFFSET + CPMVEC_SCC3)
 193 #define MPC8xx_INT_SCC4         (CPM_IRQ_OFFSET + CPMVEC_SCC4)
 194 #define MPC8xx_INT_SMC1         (CPM_IRQ_OFFSET + CPMVEC_SMC1)
 195 #define MPC8xx_INT_SMC2         (CPM_IRQ_OFFSET + CPMVEC_SMC2)
 196
 197 /* The internal interrupts we can configure as we see fit.
 198  * My personal preference is CPM at level 2, which puts it above the
 199  * MBX PCI/ISA/IDE interrupts.
 200  */
 201 #ifndef PIT_INTERRUPT
 202 #define PIT_INTERRUPT           SIU_LEVEL0
 203 #endif
 204 #ifndef CPM_INTERRUPT
 205 #define CPM_INTERRUPT           SIU_LEVEL2
 206 #endif
 207 #ifndef PCMCIA_INTERRUPT
 208 #define PCMCIA_INTERRUPT        SIU_LEVEL6
 209 #endif
 210 #ifndef DEC_INTERRUPT
 211 #define DEC_INTERRUPT           SIU_LEVEL7
 212 #endif
 213
 214 /* Some internal interrupt registers use an 8-bit mask for the interrupt
 215  * level instead of a number.
 216  */
 217 #define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
 218
 219 #elif defined(CONFIG_83xx)
 220 #include <asm/mpc83xx.h>
 221
 222 #define NR_IRQS (NR_IPIC_INTS)
 223
 224 #elif defined(CONFIG_85xx)
 225 /* Now include the board configuration specific associations.
 226 */
 227 #include <asm/mpc85xx.h>
 228
 229 /* The MPC8548 openpic has 48 internal interrupts and 12 external
 230  * interrupts.
 231  *
 232  * We are "flattening" the interrupt vectors of the cascaded CPM
 233  * so that we can uniquely identify any interrupt source with a
 234  * single integer.
 235  */
 236 #define NR_CPM_INTS     64
 237 #define NR_EPIC_INTS    60
 238 #ifndef NR_8259_INTS
 239 #define NR_8259_INTS    0
 240 #endif
 241 #define NUM_8259_INTERRUPTS NR_8259_INTS
 242
 243 #ifndef CPM_IRQ_OFFSET
 244 #define CPM_IRQ_OFFSET  0
 245 #endif
 246
 247 #define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
 248
 249 /* Internal IRQs on MPC85xx OpenPIC */
 250
 251 #ifndef MPC85xx_OPENPIC_IRQ_OFFSET
 252 #ifdef CONFIG_CPM2
 253 #define MPC85xx_OPENPIC_IRQ_OFFSET      (CPM_IRQ_OFFSET + NR_CPM_INTS)
 254 #else
 255 #define MPC85xx_OPENPIC_IRQ_OFFSET      0
 256 #endif
 257 #endif
 258
 259 /* Not all of these exist on all MPC85xx implementations */
 260 #define MPC85xx_IRQ_L2CACHE     ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
 261 #define MPC85xx_IRQ_ECM         ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
 262 #define MPC85xx_IRQ_DDR         ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
 263 #define MPC85xx_IRQ_LBIU        ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
 264 #define MPC85xx_IRQ_DMA0        ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
 265 #define MPC85xx_IRQ_DMA1        ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
 266 #define MPC85xx_IRQ_DMA2        ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
 267 #define MPC85xx_IRQ_DMA3        ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
 268 #define MPC85xx_IRQ_PCI1        ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
 269 #define MPC85xx_IRQ_PCI2        ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
 270 #define MPC85xx_IRQ_RIO_ERROR   ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
 271 #define MPC85xx_IRQ_RIO_BELL    (10 + MPC85xx_OPENPIC_IRQ_OFFSET)
 272 #define MPC85xx_IRQ_RIO_TX      (11 + MPC85xx_OPENPIC_IRQ_OFFSET)
 273 #define MPC85xx_IRQ_RIO_RX      (12 + MPC85xx_OPENPIC_IRQ_OFFSET)
 274 #define MPC85xx_IRQ_TSEC1_TX    (13 + MPC85xx_OPENPIC_IRQ_OFFSET)
 275 #define MPC85xx_IRQ_TSEC1_RX    (14 + MPC85xx_OPENPIC_IRQ_OFFSET)
 276 #define MPC85xx_IRQ_TSEC3_TX    (15 + MPC85xx_OPENPIC_IRQ_OFFSET)
 277 #define MPC85xx_IRQ_TSEC3_RX    (16 + MPC85xx_OPENPIC_IRQ_OFFSET)
 278 #define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET)
 279 #define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET)
 280 #define MPC85xx_IRQ_TSEC2_TX    (19 + MPC85xx_OPENPIC_IRQ_OFFSET)
 281 #define MPC85xx_IRQ_TSEC2_RX    (20 + MPC85xx_OPENPIC_IRQ_OFFSET)
 282 #define MPC85xx_IRQ_TSEC4_TX    (21 + MPC85xx_OPENPIC_IRQ_OFFSET)
 283 #define MPC85xx_IRQ_TSEC4_RX    (22 + MPC85xx_OPENPIC_IRQ_OFFSET)
 284 #define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET)
 285 #define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET)
 286 #define MPC85xx_IRQ_FEC         (25 + MPC85xx_OPENPIC_IRQ_OFFSET)
 287 #define MPC85xx_IRQ_DUART       (26 + MPC85xx_OPENPIC_IRQ_OFFSET)
 288 #define MPC85xx_IRQ_IIC1        (27 + MPC85xx_OPENPIC_IRQ_OFFSET)
 289 #define MPC85xx_IRQ_PERFMON     (28 + MPC85xx_OPENPIC_IRQ_OFFSET)
 290 #define MPC85xx_IRQ_SEC2        (29 + MPC85xx_OPENPIC_IRQ_OFFSET)
 291 #define MPC85xx_IRQ_CPM         (30 + MPC85xx_OPENPIC_IRQ_OFFSET)
 292
 293 /* The 12 external interrupt lines */
 294 #define MPC85xx_IRQ_EXT0        (48 + MPC85xx_OPENPIC_IRQ_OFFSET)
 295 #define MPC85xx_IRQ_EXT1        (49 + MPC85xx_OPENPIC_IRQ_OFFSET)
 296 #define MPC85xx_IRQ_EXT2        (50 + MPC85xx_OPENPIC_IRQ_OFFSET)
 297 #define MPC85xx_IRQ_EXT3        (51 + MPC85xx_OPENPIC_IRQ_OFFSET)
 298 #define MPC85xx_IRQ_EXT4        (52 + MPC85xx_OPENPIC_IRQ_OFFSET)
 299 #define MPC85xx_IRQ_EXT5        (53 + MPC85xx_OPENPIC_IRQ_OFFSET)
 300 #define MPC85xx_IRQ_EXT6        (54 + MPC85xx_OPENPIC_IRQ_OFFSET)
 301 #define MPC85xx_IRQ_EXT7        (55 + MPC85xx_OPENPIC_IRQ_OFFSET)
 302 #define MPC85xx_IRQ_EXT8        (56 + MPC85xx_OPENPIC_IRQ_OFFSET)
 303 #define MPC85xx_IRQ_EXT9        (57 + MPC85xx_OPENPIC_IRQ_OFFSET)
 304 #define MPC85xx_IRQ_EXT10       (58 + MPC85xx_OPENPIC_IRQ_OFFSET)
 305 #define MPC85xx_IRQ_EXT11       (59 + MPC85xx_OPENPIC_IRQ_OFFSET)
 306
 307 /* CPM related interrupts */
 308 #define SIU_INT_ERROR           ((uint)0x00+CPM_IRQ_OFFSET)
 309 #define SIU_INT_I2C             ((uint)0x01+CPM_IRQ_OFFSET)
 310 #define SIU_INT_SPI             ((uint)0x02+CPM_IRQ_OFFSET)
 311 #define SIU_INT_RISC            ((uint)0x03+CPM_IRQ_OFFSET)
 312 #define SIU_INT_SMC1            ((uint)0x04+CPM_IRQ_OFFSET)
 313 #define SIU_INT_SMC2            ((uint)0x05+CPM_IRQ_OFFSET)
 314 #define SIU_INT_USB             ((uint)0x0b+CPM_IRQ_OFFSET)
 315 #define SIU_INT_TIMER1          ((uint)0x0c+CPM_IRQ_OFFSET)
 316 #define SIU_INT_TIMER2          ((uint)0x0d+CPM_IRQ_OFFSET)
 317 #define SIU_INT_TIMER3          ((uint)0x0e+CPM_IRQ_OFFSET)
 318 #define SIU_INT_TIMER4          ((uint)0x0f+CPM_IRQ_OFFSET)
 319 #define SIU_INT_FCC1            ((uint)0x20+CPM_IRQ_OFFSET)
 320 #define SIU_INT_FCC2            ((uint)0x21+CPM_IRQ_OFFSET)
 321 #define SIU_INT_FCC3            ((uint)0x22+CPM_IRQ_OFFSET)
 322 #define SIU_INT_MCC1            ((uint)0x24+CPM_IRQ_OFFSET)
 323 #define SIU_INT_MCC2            ((uint)0x25+CPM_IRQ_OFFSET)
 324 #define SIU_INT_SCC1            ((uint)0x28+CPM_IRQ_OFFSET)
 325 #define SIU_INT_SCC2            ((uint)0x29+CPM_IRQ_OFFSET)
 326 #define SIU_INT_SCC3            ((uint)0x2a+CPM_IRQ_OFFSET)
 327 #define SIU_INT_SCC4            ((uint)0x2b+CPM_IRQ_OFFSET)
 328 #define SIU_INT_PC15            ((uint)0x30+CPM_IRQ_OFFSET)
 329 #define SIU_INT_PC14            ((uint)0x31+CPM_IRQ_OFFSET)
 330 #define SIU_INT_PC13            ((uint)0x32+CPM_IRQ_OFFSET)
 331 #define SIU_INT_PC12            ((uint)0x33+CPM_IRQ_OFFSET)
 332 #define SIU_INT_PC11            ((uint)0x34+CPM_IRQ_OFFSET)
 333 #define SIU_INT_PC10            ((uint)0x35+CPM_IRQ_OFFSET)
 334 #define SIU_INT_PC9             ((uint)0x36+CPM_IRQ_OFFSET)
 335 #define SIU_INT_PC8             ((uint)0x37+CPM_IRQ_OFFSET)
 336 #define SIU_INT_PC7             ((uint)0x38+CPM_IRQ_OFFSET)
 337 #define SIU_INT_PC6             ((uint)0x39+CPM_IRQ_OFFSET)
 338 #define SIU_INT_PC5             ((uint)0x3a+CPM_IRQ_OFFSET)
 339 #define SIU_INT_PC4             ((uint)0x3b+CPM_IRQ_OFFSET)
 340 #define SIU_INT_PC3             ((uint)0x3c+CPM_IRQ_OFFSET)
 341 #define SIU_INT_PC2             ((uint)0x3d+CPM_IRQ_OFFSET)
 342 #define SIU_INT_PC1             ((uint)0x3e+CPM_IRQ_OFFSET)
 343 #define SIU_INT_PC0             ((uint)0x3f+CPM_IRQ_OFFSET)
 344
 345 #elif defined(CONFIG_PPC_86xx)
 346 #include <asm/mpc86xx.h>
 347
 348 #define NR_EPIC_INTS 48
 349 #ifndef NR_8259_INTS
 350 #define NR_8259_INTS 16 /*ULI 1575 can route 12 interrupts */
 351 #endif
 352 #define NUM_8259_INTERRUPTS NR_8259_INTS
 353
 354 #ifndef I8259_OFFSET
 355 #define I8259_OFFSET 0
 356 #endif
 357
 358 #define NR_IRQS 256
 359
 360 /* Internal IRQs on MPC86xx OpenPIC */
 361
 362 #ifndef MPC86xx_OPENPIC_IRQ_OFFSET
 363 #define MPC86xx_OPENPIC_IRQ_OFFSET NR_8259_INTS
 364 #endif
 365
 366 /* The 48 internal sources */
 367 #define MPC86xx_IRQ_NULL        ( 0 + MPC86xx_OPENPIC_IRQ_OFFSET)
 368 #define MPC86xx_IRQ_MCM         ( 1 + MPC86xx_OPENPIC_IRQ_OFFSET)
 369 #define MPC86xx_IRQ_DDR         ( 2 + MPC86xx_OPENPIC_IRQ_OFFSET)
 370 #define MPC86xx_IRQ_LBC         ( 3 + MPC86xx_OPENPIC_IRQ_OFFSET)
 371 #define MPC86xx_IRQ_DMA0        ( 4 + MPC86xx_OPENPIC_IRQ_OFFSET)
 372 #define MPC86xx_IRQ_DMA1        ( 5 + MPC86xx_OPENPIC_IRQ_OFFSET)
 373 #define MPC86xx_IRQ_DMA2        ( 6 + MPC86xx_OPENPIC_IRQ_OFFSET)
 374 #define MPC86xx_IRQ_DMA3        ( 7 + MPC86xx_OPENPIC_IRQ_OFFSET)
 375
 376 /* no 10,11 */
 377 #define MPC86xx_IRQ_UART2       (12 + MPC86xx_OPENPIC_IRQ_OFFSET)
 378 #define MPC86xx_IRQ_TSEC1_TX    (13 + MPC86xx_OPENPIC_IRQ_OFFSET)
 379 #define MPC86xx_IRQ_TSEC1_RX    (14 + MPC86xx_OPENPIC_IRQ_OFFSET)
 380 #define MPC86xx_IRQ_TSEC3_TX    (15 + MPC86xx_OPENPIC_IRQ_OFFSET)
 381 #define MPC86xx_IRQ_TSEC3_RX    (16 + MPC86xx_OPENPIC_IRQ_OFFSET)
 382 #define MPC86xx_IRQ_TSEC3_ERROR (17 + MPC86xx_OPENPIC_IRQ_OFFSET)
 383 #define MPC86xx_IRQ_TSEC1_ERROR (18 + MPC86xx_OPENPIC_IRQ_OFFSET)
 384 #define MPC86xx_IRQ_TSEC2_TX    (19 + MPC86xx_OPENPIC_IRQ_OFFSET)
 385 #define MPC86xx_IRQ_TSEC2_RX    (20 + MPC86xx_OPENPIC_IRQ_OFFSET)
 386 #define MPC86xx_IRQ_TSEC4_TX    (21 + MPC86xx_OPENPIC_IRQ_OFFSET)
 387 #define MPC86xx_IRQ_TSEC4_RX    (22 + MPC86xx_OPENPIC_IRQ_OFFSET)
 388 #define MPC86xx_IRQ_TSEC4_ERROR (23 + MPC86xx_OPENPIC_IRQ_OFFSET)
 389 #define MPC86xx_IRQ_TSEC2_ERROR (24 + MPC86xx_OPENPIC_IRQ_OFFSET)
 390 /* no 25 */
 391 #define MPC86xx_IRQ_UART1       (26 + MPC86xx_OPENPIC_IRQ_OFFSET)
 392 #define MPC86xx_IRQ_IIC         (27 + MPC86xx_OPENPIC_IRQ_OFFSET)
 393 #define MPC86xx_IRQ_PERFMON       (28 + MPC86xx_OPENPIC_IRQ_OFFSET)
 394 /* no 29,30,31 */
 395 #define MPC86xx_IRQ_SRIO_ERROR    (32 + MPC86xx_OPENPIC_IRQ_OFFSET)
 396 #define MPC86xx_IRQ_SRIO_OUT_BELL (33 + MPC86xx_OPENPIC_IRQ_OFFSET)
 397 #define MPC86xx_IRQ_SRIO_IN_BELL  (34 + MPC86xx_OPENPIC_IRQ_OFFSET)
 398 /* no 35,36 */
 399 #define MPC86xx_IRQ_SRIO_OUT_MSG1 (37 + MPC86xx_OPENPIC_IRQ_OFFSET)
 400 #define MPC86xx_IRQ_SRIO_IN_MSG1  (38 + MPC86xx_OPENPIC_IRQ_OFFSET)
 401 #define MPC86xx_IRQ_SRIO_OUT_MSG2 (39 + MPC86xx_OPENPIC_IRQ_OFFSET)
 402 #define MPC86xx_IRQ_SRIO_IN_MSG2  (40 + MPC86xx_OPENPIC_IRQ_OFFSET)
 403
 404 /* The 12 external interrupt lines */
 405 #define MPC86xx_IRQ_EXT_BASE    48
 406 #define MPC86xx_IRQ_EXT0        (0 + MPC86xx_IRQ_EXT_BASE \
 407                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 408 #define MPC86xx_IRQ_EXT1        (1 + MPC86xx_IRQ_EXT_BASE \
 409                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 410 #define MPC86xx_IRQ_EXT2        (2 + MPC86xx_IRQ_EXT_BASE \
 411                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 412 #define MPC86xx_IRQ_EXT3        (3 + MPC86xx_IRQ_EXT_BASE \
 413                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 414 #define MPC86xx_IRQ_EXT4        (4 + MPC86xx_IRQ_EXT_BASE \
 415                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 416 #define MPC86xx_IRQ_EXT5        (5 + MPC86xx_IRQ_EXT_BASE \
 417                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 418 #define MPC86xx_IRQ_EXT6        (6 + MPC86xx_IRQ_EXT_BASE \
 419                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 420 #define MPC86xx_IRQ_EXT7        (7 + MPC86xx_IRQ_EXT_BASE \
 421                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 422 #define MPC86xx_IRQ_EXT8        (8 + MPC86xx_IRQ_EXT_BASE \
 423                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 424 #define MPC86xx_IRQ_EXT9        (9 + MPC86xx_IRQ_EXT_BASE \
 425                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 426 #define MPC86xx_IRQ_EXT10       (10 + MPC86xx_IRQ_EXT_BASE \
 427                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 428 #define MPC86xx_IRQ_EXT11       (11 + MPC86xx_IRQ_EXT_BASE \
 429                 + MPC86xx_OPENPIC_IRQ_OFFSET)
 430
 431 #else /* CONFIG_40x + CONFIG_8xx */
 432 /*
 433  * this is the # irq's for all ppc arch's (pmac/chrp/prep)
 434  * so it is the max of them all
 435  */
 436 #define NR_IRQS                 256
 437 #define __DO_IRQ_CANON  1
 438
 439 #ifndef CONFIG_8260
 440
 441 #define NUM_8259_INTERRUPTS     16
 442
 443 #else /* CONFIG_8260 */
 444
 445 /* The 8260 has an internal interrupt controller with a maximum of
 446  * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
 447  * Don't be confused by the 8260 documentation where they list an
 448  * "interrupt number" and "interrupt vector".  We are only interested
 449  * in the interrupt vector.  There are "reserved" holes where the
 450  * vector number increases, but the interrupt number in the table does not.
 451  * (Document errata updates have fixed this...make sure you have up to
 452  * date processor documentation -- Dan).
 453  */
 454
 455 #ifndef CPM_IRQ_OFFSET
 456 #define CPM_IRQ_OFFSET  0
 457 #endif
 458
 459 #define NR_CPM_INTS     64
 460
 461 #define SIU_INT_ERROR           ((uint)0x00 + CPM_IRQ_OFFSET)
 462 #define SIU_INT_I2C             ((uint)0x01 + CPM_IRQ_OFFSET)
 463 #define SIU_INT_SPI             ((uint)0x02 + CPM_IRQ_OFFSET)
 464 #define SIU_INT_RISC            ((uint)0x03 + CPM_IRQ_OFFSET)
 465 #define SIU_INT_SMC1            ((uint)0x04 + CPM_IRQ_OFFSET)
 466 #define SIU_INT_SMC2            ((uint)0x05 + CPM_IRQ_OFFSET)
 467 #define SIU_INT_IDMA1           ((uint)0x06 + CPM_IRQ_OFFSET)
 468 #define SIU_INT_IDMA2           ((uint)0x07 + CPM_IRQ_OFFSET)
 469 #define SIU_INT_IDMA3           ((uint)0x08 + CPM_IRQ_OFFSET)
 470 #define SIU_INT_IDMA4           ((uint)0x09 + CPM_IRQ_OFFSET)
 471 #define SIU_INT_SDMA            ((uint)0x0a + CPM_IRQ_OFFSET)
 472 #define SIU_INT_USB             ((uint)0x0b + CPM_IRQ_OFFSET)
 473 #define SIU_INT_TIMER1          ((uint)0x0c + CPM_IRQ_OFFSET)
 474 #define SIU_INT_TIMER2          ((uint)0x0d + CPM_IRQ_OFFSET)
 475 #define SIU_INT_TIMER3          ((uint)0x0e + CPM_IRQ_OFFSET)
 476 #define SIU_INT_TIMER4          ((uint)0x0f + CPM_IRQ_OFFSET)
 477 #define SIU_INT_TMCNT           ((uint)0x10 + CPM_IRQ_OFFSET)
 478 #define SIU_INT_PIT             ((uint)0x11 + CPM_IRQ_OFFSET)
 479 #define SIU_INT_PCI             ((uint)0x12 + CPM_IRQ_OFFSET)
 480 #define SIU_INT_IRQ1            ((uint)0x13 + CPM_IRQ_OFFSET)
 481 #define SIU_INT_IRQ2            ((uint)0x14 + CPM_IRQ_OFFSET)
 482 #define SIU_INT_IRQ3            ((uint)0x15 + CPM_IRQ_OFFSET)
 483 #define SIU_INT_IRQ4            ((uint)0x16 + CPM_IRQ_OFFSET)
 484 #define SIU_INT_IRQ5            ((uint)0x17 + CPM_IRQ_OFFSET)
 485 #define SIU_INT_IRQ6            ((uint)0x18 + CPM_IRQ_OFFSET)
 486 #define SIU_INT_IRQ7            ((uint)0x19 + CPM_IRQ_OFFSET)
 487 #define SIU_INT_FCC1            ((uint)0x20 + CPM_IRQ_OFFSET)
 488 #define SIU_INT_FCC2            ((uint)0x21 + CPM_IRQ_OFFSET)
 489 #define SIU_INT_FCC3            ((uint)0x22 + CPM_IRQ_OFFSET)
 490 #define SIU_INT_MCC1            ((uint)0x24 + CPM_IRQ_OFFSET)
 491 #define SIU_INT_MCC2            ((uint)0x25 + CPM_IRQ_OFFSET)
 492 #define SIU_INT_SCC1            ((uint)0x28 + CPM_IRQ_OFFSET)
 493 #define SIU_INT_SCC2            ((uint)0x29 + CPM_IRQ_OFFSET)
 494 #define SIU_INT_SCC3            ((uint)0x2a + CPM_IRQ_OFFSET)
 495 #define SIU_INT_SCC4            ((uint)0x2b + CPM_IRQ_OFFSET)
 496 #define SIU_INT_PC15            ((uint)0x30 + CPM_IRQ_OFFSET)
 497 #define SIU_INT_PC14            ((uint)0x31 + CPM_IRQ_OFFSET)
 498 #define SIU_INT_PC13            ((uint)0x32 + CPM_IRQ_OFFSET)
 499 #define SIU_INT_PC12            ((uint)0x33 + CPM_IRQ_OFFSET)
 500 #define SIU_INT_PC11            ((uint)0x34 + CPM_IRQ_OFFSET)
 501 #define SIU_INT_PC10            ((uint)0x35 + CPM_IRQ_OFFSET)
 502 #define SIU_INT_PC9             ((uint)0x36 + CPM_IRQ_OFFSET)
 503 #define SIU_INT_PC8             ((uint)0x37 + CPM_IRQ_OFFSET)
 504 #define SIU_INT_PC7             ((uint)0x38 + CPM_IRQ_OFFSET)
 505 #define SIU_INT_PC6             ((uint)0x39 + CPM_IRQ_OFFSET)
 506 #define SIU_INT_PC5             ((uint)0x3a + CPM_IRQ_OFFSET)
 507 #define SIU_INT_PC4             ((uint)0x3b + CPM_IRQ_OFFSET)
 508 #define SIU_INT_PC3             ((uint)0x3c + CPM_IRQ_OFFSET)
 509 #define SIU_INT_PC2             ((uint)0x3d + CPM_IRQ_OFFSET)
 510 #define SIU_INT_PC1             ((uint)0x3e + CPM_IRQ_OFFSET)
 511 #define SIU_INT_PC0             ((uint)0x3f + CPM_IRQ_OFFSET)
 512
 513 #endif /* CONFIG_8260 */
 514
 515 #endif
 516
 517 #define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
 518 /* pedantic: these are long because they are used with set_bit --RR */
 519 extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
 520 extern atomic_t ppc_n_lost_interrupts;
 521
 522 #define virt_irq_create_mapping(x)      (x)
 523
 524 #endif
 525
 526 /*
 527  * Because many systems have two overlapping names spaces for
 528  * interrupts (ISA and XICS for example), and the ISA interrupts
 529  * have historically not been easy to renumber, we allow ISA
 530  * interrupts to take values 0 - 15, and shift up the remaining
 531  * interrupts by 0x10.
 532  */
 533 #define NUM_ISA_INTERRUPTS      0x10
 534 extern int __irq_offset_value;
 535
 536 static inline int irq_offset_up(int irq)
 537 {
 538         return(irq + __irq_offset_value);
 539 }
 540
 541 static inline int irq_offset_down(int irq)
 542 {
 543         return(irq - __irq_offset_value);
 544 }
 545
 546 static inline int irq_offset_value(void)
 547 {
 548         return __irq_offset_value;
 549 }
 550
 551 #ifdef __DO_IRQ_CANON
 552 extern int ppc_do_canonicalize_irqs;
 553 #else
 554 #define ppc_do_canonicalize_irqs        0
 555 #endif
 556
 557 static __inline__ int irq_canonicalize(int irq)
 558 {
 559         if (ppc_do_canonicalize_irqs && irq == 2)
 560                 irq = 9;
 561         return irq;
 562 }
 563
 564 extern int distribute_irqs;
 565
 566 struct irqaction;
 567 struct pt_regs;
 568
 569 #define __ARCH_HAS_DO_SOFTIRQ
 570
 571 extern void __do_softirq(void);
 572
 573 #ifdef CONFIG_IRQSTACKS
 574 /*
 575  * Per-cpu stacks for handling hard and soft interrupts.
 576  */
 577 extern struct thread_info *hardirq_ctx[NR_CPUS];
 578 extern struct thread_info *softirq_ctx[NR_CPUS];
 579
 580 extern void irq_ctx_init(void);
 581 extern void call_do_softirq(struct thread_info *tp);
 582 extern int call___do_IRQ(int irq, struct pt_regs *regs,
 583                 struct thread_info *tp);
 584
 585 #else
 586 #define irq_ctx_init()
 587
 588 #endif /* CONFIG_IRQSTACKS */
 589
 590 extern void do_IRQ(struct pt_regs *regs);
 591
 592 #endif /* _ASM_IRQ_H */
 593 #endif /* __KERNEL__ */