2 * linux/arch/arm/mach-sa1100/collie.c
4 * May be copied or modified under the terms of the GNU General Public
5 * License. See linux/COPYING for more information.
7 * This file contains all Collie-specific tweaks.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 * 2006 Pavel Machek <pavel@suse.cz>
15 * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
16 * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
17 * 04-16-2001 Lineo Japan,Inc. ...
20 #include <linux/config.h>
21 #include <linux/init.h>
22 #include <linux/kernel.h>
23 #include <linux/tty.h>
24 #include <linux/delay.h>
25 #include <linux/platform_device.h>
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/partitions.h>
28 #include <linux/timer.h>
30 #include <asm/hardware.h>
31 #include <asm/mach-types.h>
33 #include <asm/setup.h>
34 #include <asm/arch/collie.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/flash.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/serial_sa1100.h>
41 #include <asm/hardware/scoop.h>
42 #include <asm/mach/sharpsl_param.h>
43 #include <asm/hardware/locomo.h>
44 #include <asm/arch/mcp.h>
48 static struct resource collie_scoop_resources
[] = {
52 .flags
= IORESOURCE_MEM
,
56 static struct scoop_config collie_scoop_setup
= {
57 .io_dir
= COLLIE_SCOOP_IO_DIR
,
58 .io_out
= COLLIE_SCOOP_IO_OUT
,
61 struct platform_device colliescoop_device
= {
62 .name
= "sharp-scoop",
65 .platform_data
= &collie_scoop_setup
,
67 .num_resources
= ARRAY_SIZE(collie_scoop_resources
),
68 .resource
= collie_scoop_resources
,
71 static struct scoop_pcmcia_dev collie_pcmcia_scoop
[] = {
73 .dev
= &colliescoop_device
.dev
,
74 .irq
= COLLIE_IRQ_GPIO_CF_IRQ
,
75 .cd_irq
= COLLIE_IRQ_GPIO_CF_CD
,
76 .cd_irq_str
= "PCMCIA0 CD",
80 static struct scoop_pcmcia_config collie_pcmcia_config
= {
81 .devs
= &collie_pcmcia_scoop
[0],
86 static struct mcp_plat_data collie_mcp_data
= {
88 .sclk_rate
= 11981000,
91 #ifdef CONFIG_SHARP_LOCOMO
93 * low-level UART features.
95 static struct locomo_dev
*uart_dev
= NULL
;
97 static void collie_uart_set_mctrl(struct uart_port
*port
, u_int mctrl
)
99 if (!uart_dev
) return;
101 if (mctrl
& TIOCM_RTS
)
102 locomo_gpio_write(uart_dev
, LOCOMO_GPIO_RTS
, 0);
104 locomo_gpio_write(uart_dev
, LOCOMO_GPIO_RTS
, 1);
106 if (mctrl
& TIOCM_DTR
)
107 locomo_gpio_write(uart_dev
, LOCOMO_GPIO_DTR
, 0);
109 locomo_gpio_write(uart_dev
, LOCOMO_GPIO_DTR
, 1);
112 static u_int
collie_uart_get_mctrl(struct uart_port
*port
)
116 if (!uart_dev
) return ret
;
118 r
= locomo_gpio_read_output(uart_dev
, LOCOMO_GPIO_CTS
& LOCOMO_GPIO_DSR
);
119 if (r
& LOCOMO_GPIO_CTS
)
121 if (r
& LOCOMO_GPIO_DSR
)
127 static struct sa1100_port_fns collie_port_fns __initdata
= {
128 .set_mctrl
= collie_uart_set_mctrl
,
129 .get_mctrl
= collie_uart_get_mctrl
,
132 static int collie_uart_probe(struct locomo_dev
*dev
)
138 static int collie_uart_remove(struct locomo_dev
*dev
)
144 static struct locomo_driver collie_uart_driver
= {
146 .name
= "collie_uart",
148 .devid
= LOCOMO_DEVID_UART
,
149 .probe
= collie_uart_probe
,
150 .remove
= collie_uart_remove
,
153 static int __init
collie_uart_init(void) {
154 return locomo_driver_register(&collie_uart_driver
);
156 device_initcall(collie_uart_init
);
161 static struct resource locomo_resources
[] = {
165 .flags
= IORESOURCE_MEM
,
170 .flags
= IORESOURCE_IRQ
,
174 static struct platform_device locomo_device
= {
177 .num_resources
= ARRAY_SIZE(locomo_resources
),
178 .resource
= locomo_resources
,
181 static struct platform_device
*devices
[] __initdata
= {
186 static struct mtd_partition collie_partitions
[] = {
188 .name
= "bootloader",
191 .mask_flags
= MTD_WRITEABLE
194 .offset
= MTDPART_OFS_APPEND
,
198 .offset
= MTDPART_OFS_APPEND
,
203 static void collie_set_vpp(int vpp
)
205 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPCR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPCR
) | COLLIE_SCP_VPEN
);
207 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
) | COLLIE_SCP_VPEN
);
209 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
) & ~COLLIE_SCP_VPEN
);
212 static struct flash_platform_data collie_flash_data
= {
213 .map_name
= "cfi_probe",
214 .set_vpp
= collie_set_vpp
,
215 .parts
= collie_partitions
,
216 .nr_parts
= ARRAY_SIZE(collie_partitions
),
219 static struct resource collie_flash_resources
[] = {
221 .start
= SA1100_CS0_PHYS
,
222 .end
= SA1100_CS0_PHYS
+ SZ_32M
- 1,
223 .flags
= IORESOURCE_MEM
,
227 static void __init
collie_init(void)
232 GAFR
= ( GPIO_SSP_TXD
| \
233 GPIO_SSP_SCLK
| GPIO_SSP_SFRM
| GPIO_SSP_CLK
| GPIO_TIC_ACK
| \
236 GPDR
= ( GPIO_LDD8
| GPIO_LDD9
| GPIO_LDD10
| GPIO_LDD11
| GPIO_LDD12
| \
237 GPIO_LDD13
| GPIO_LDD14
| GPIO_LDD15
| GPIO_SSP_TXD
| \
238 GPIO_SSP_SCLK
| GPIO_SSP_SFRM
| GPIO_SDLC_SCLK
| \
239 GPIO_SDLC_AAF
| GPIO_UART_SCLK1
| GPIO_32_768kHz
);
243 PPDR
= ( PPC_LDD0
| PPC_LDD1
| PPC_LDD2
| PPC_LDD3
| PPC_LDD4
| PPC_LDD5
| \
244 PPC_LDD6
| PPC_LDD7
| PPC_L_PCLK
| PPC_L_LCLK
| PPC_L_FCLK
| PPC_L_BIAS
| \
245 PPC_TXD1
| PPC_TXD2
| PPC_RXD2
| PPC_TXD3
| PPC_TXD4
| PPC_SCLK
| PPC_SFRM
);
247 PSDR
= ( PPC_RXD1
| PPC_RXD2
| PPC_RXD3
| PPC_RXD4
);
249 GAFR
|= GPIO_32_768kHz
;
250 GPDR
|= GPIO_32_768kHz
;
251 TUCR
= TUCR_32_768kHz
;
253 platform_scoop_config
= &collie_pcmcia_config
;
255 ret
= platform_add_devices(devices
, ARRAY_SIZE(devices
));
257 printk(KERN_WARNING
"collie: Unable to register LoCoMo device\n");
260 sa11x0_set_flash_data(&collie_flash_data
, collie_flash_resources
,
261 ARRAY_SIZE(collie_flash_resources
));
262 sa11x0_set_mcp_data(&collie_mcp_data
);
264 sharpsl_save_param();
267 static struct map_desc collie_io_desc
[] __initdata
= {
268 { /* 32M main flash (cs0) */
269 .virtual = 0xe8000000,
270 .pfn
= __phys_to_pfn(0x00000000),
271 .length
= 0x02000000,
273 }, { /* 32M boot flash (cs1) */
274 .virtual = 0xea000000,
275 .pfn
= __phys_to_pfn(0x08000000),
276 .length
= 0x02000000,
281 static void __init
collie_map_io(void)
284 iotable_init(collie_io_desc
, ARRAY_SIZE(collie_io_desc
));
286 #ifdef CONFIG_SHARP_LOCOMO
287 sa1100_register_uart_fns(&collie_port_fns
);
289 sa1100_register_uart(0, 3);
290 sa1100_register_uart(1, 1);
293 MACHINE_START(COLLIE
, "Sharp-Collie")
294 .phys_io
= 0x80000000,
295 .io_pg_offst
= ((0xf8000000) >> 18) & 0xfffc,
296 .map_io
= collie_map_io
,
297 .init_irq
= sa1100_init_irq
,
298 .timer
= &sa1100_timer
,
299 .init_machine
= collie_init
,