[ARM] pxa: update defconfig for Verdex Pro
[linux-2.6/verdex.git] / arch / arm / mach-footbridge / common.c
blobb97f529e58e8455016f675d965f2cc568fda1b2e
1 /*
2 * linux/arch/arm/mach-footbridge/common.c
4 * Copyright (C) 1998-2000 Russell King, Dave Gilbert.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/mm.h>
13 #include <linux/ioport.h>
14 #include <linux/list.h>
15 #include <linux/init.h>
16 #include <linux/io.h>
17 #include <linux/spinlock.h>
19 #include <asm/pgtable.h>
20 #include <asm/page.h>
21 #include <asm/irq.h>
22 #include <asm/mach-types.h>
23 #include <asm/setup.h>
24 #include <asm/hardware/dec21285.h>
26 #include <asm/mach/irq.h>
27 #include <asm/mach/map.h>
29 #include "common.h"
31 unsigned int mem_fclk_21285 = 50000000;
33 EXPORT_SYMBOL(mem_fclk_21285);
35 static void __init early_fclk(char **arg)
37 mem_fclk_21285 = simple_strtoul(*arg, arg, 0);
40 __early_param("mem_fclk_21285=", early_fclk);
42 static int __init parse_tag_memclk(const struct tag *tag)
44 mem_fclk_21285 = tag->u.memclk.fmemclk;
45 return 0;
48 __tagtable(ATAG_MEMCLK, parse_tag_memclk);
51 * Footbridge IRQ translation table
52 * Converts from our IRQ numbers into FootBridge masks
54 static const int fb_irq_mask[] = {
55 IRQ_MASK_UART_RX, /* 0 */
56 IRQ_MASK_UART_TX, /* 1 */
57 IRQ_MASK_TIMER1, /* 2 */
58 IRQ_MASK_TIMER2, /* 3 */
59 IRQ_MASK_TIMER3, /* 4 */
60 IRQ_MASK_IN0, /* 5 */
61 IRQ_MASK_IN1, /* 6 */
62 IRQ_MASK_IN2, /* 7 */
63 IRQ_MASK_IN3, /* 8 */
64 IRQ_MASK_DOORBELLHOST, /* 9 */
65 IRQ_MASK_DMA1, /* 10 */
66 IRQ_MASK_DMA2, /* 11 */
67 IRQ_MASK_PCI, /* 12 */
68 IRQ_MASK_SDRAMPARITY, /* 13 */
69 IRQ_MASK_I2OINPOST, /* 14 */
70 IRQ_MASK_PCI_ABORT, /* 15 */
71 IRQ_MASK_PCI_SERR, /* 16 */
72 IRQ_MASK_DISCARD_TIMER, /* 17 */
73 IRQ_MASK_PCI_DPERR, /* 18 */
74 IRQ_MASK_PCI_PERR, /* 19 */
77 static void fb_mask_irq(unsigned int irq)
79 *CSR_IRQ_DISABLE = fb_irq_mask[_DC21285_INR(irq)];
82 static void fb_unmask_irq(unsigned int irq)
84 *CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(irq)];
87 static struct irq_chip fb_chip = {
88 .ack = fb_mask_irq,
89 .mask = fb_mask_irq,
90 .unmask = fb_unmask_irq,
93 static void __init __fb_init_irq(void)
95 unsigned int irq;
98 * setup DC21285 IRQs
100 *CSR_IRQ_DISABLE = -1;
101 *CSR_FIQ_DISABLE = -1;
103 for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
104 set_irq_chip(irq, &fb_chip);
105 set_irq_handler(irq, handle_level_irq);
106 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
110 void __init footbridge_init_irq(void)
112 __fb_init_irq();
114 if (!footbridge_cfn_mode())
115 return;
117 if (machine_is_ebsa285())
118 /* The following is dependent on which slot
119 * you plug the Southbridge card into. We
120 * currently assume that you plug it into
121 * the right-hand most slot.
123 isa_init_irq(IRQ_PCI);
125 if (machine_is_cats())
126 isa_init_irq(IRQ_IN2);
128 if (machine_is_netwinder())
129 isa_init_irq(IRQ_IN3);
133 * Common mapping for all systems. Note that the outbound write flush is
134 * commented out since there is a "No Fix" problem with it. Not mapping
135 * it means that we have extra bullet protection on our feet.
137 static struct map_desc fb_common_io_desc[] __initdata = {
139 .virtual = ARMCSR_BASE,
140 .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE),
141 .length = ARMCSR_SIZE,
142 .type = MT_DEVICE,
143 }, {
144 .virtual = XBUS_BASE,
145 .pfn = __phys_to_pfn(0x40000000),
146 .length = XBUS_SIZE,
147 .type = MT_DEVICE,
152 * The mapping when the footbridge is in host mode. We don't map any of
153 * this when we are in add-in mode.
155 static struct map_desc ebsa285_host_io_desc[] __initdata = {
156 #if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
158 .virtual = PCIMEM_BASE,
159 .pfn = __phys_to_pfn(DC21285_PCI_MEM),
160 .length = PCIMEM_SIZE,
161 .type = MT_DEVICE,
162 }, {
163 .virtual = PCICFG0_BASE,
164 .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
165 .length = PCICFG0_SIZE,
166 .type = MT_DEVICE,
167 }, {
168 .virtual = PCICFG1_BASE,
169 .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
170 .length = PCICFG1_SIZE,
171 .type = MT_DEVICE,
172 }, {
173 .virtual = PCIIACK_BASE,
174 .pfn = __phys_to_pfn(DC21285_PCI_IACK),
175 .length = PCIIACK_SIZE,
176 .type = MT_DEVICE,
177 }, {
178 .virtual = PCIO_BASE,
179 .pfn = __phys_to_pfn(DC21285_PCI_IO),
180 .length = PCIO_SIZE,
181 .type = MT_DEVICE,
183 #endif
186 void __init footbridge_map_io(void)
189 * Set up the common mapping first; we need this to
190 * determine whether we're in host mode or not.
192 iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
195 * Now, work out what we've got to map in addition on this
196 * platform.
198 if (footbridge_cfn_mode())
199 iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
202 #ifdef CONFIG_FOOTBRIDGE_ADDIN
205 * These two functions convert virtual addresses to PCI addresses and PCI
206 * addresses to virtual addresses. Note that it is only legal to use these
207 * on memory obtained via get_zeroed_page or kmalloc.
209 unsigned long __virt_to_bus(unsigned long res)
211 WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
213 return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
215 EXPORT_SYMBOL(__virt_to_bus);
217 unsigned long __bus_to_virt(unsigned long res)
219 res -= (*CSR_PCISDRAMBASE & 0xfffffff0);
220 res += PAGE_OFFSET;
222 WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
224 return res;
226 EXPORT_SYMBOL(__bus_to_virt);
228 #endif