[ARM] pxa: update defconfig for Verdex Pro
[linux-2.6/verdex.git] / arch / arm / mach-omap1 / clock.h
blob17f87427125543f47cbcf4c368b01712ea01f409
1 /*
2 * linux/arch/arm/mach-omap1/clock.h
4 * Copyright (C) 2004 - 2005 Nokia corporation
5 * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
6 * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
14 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
16 static unsigned long omap1_ckctl_recalc(struct clk *clk);
17 static unsigned long omap1_watchdog_recalc(struct clk *clk);
18 static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
19 static unsigned long omap1_sossi_recalc(struct clk *clk);
20 static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
21 static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
22 static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
23 static unsigned long omap1_uart_recalc(struct clk *clk);
24 static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
25 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
26 static void omap1_init_ext_clk(struct clk * clk);
27 static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
28 static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
30 static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
31 static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
33 struct mpu_rate {
34 unsigned long rate;
35 unsigned long xtal;
36 unsigned long pll_rate;
37 __u16 ckctl_val;
38 __u16 dpllctl_val;
41 struct uart_clk {
42 struct clk clk;
43 unsigned long sysc_addr;
46 /* Provide a method for preventing idling some ARM IDLECT clocks */
47 struct arm_idlect1_clk {
48 struct clk clk;
49 unsigned long no_idle_count;
50 __u8 idlect_shift;
53 /* ARM_CKCTL bit shifts */
54 #define CKCTL_PERDIV_OFFSET 0
55 #define CKCTL_LCDDIV_OFFSET 2
56 #define CKCTL_ARMDIV_OFFSET 4
57 #define CKCTL_DSPDIV_OFFSET 6
58 #define CKCTL_TCDIV_OFFSET 8
59 #define CKCTL_DSPMMUDIV_OFFSET 10
60 /*#define ARM_TIMXO 12*/
61 #define EN_DSPCK 13
62 /*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */
63 /* DSP_CKCTL bit shifts */
64 #define CKCTL_DSPPERDIV_OFFSET 0
66 /* ARM_IDLECT2 bit shifts */
67 #define EN_WDTCK 0
68 #define EN_XORPCK 1
69 #define EN_PERCK 2
70 #define EN_LCDCK 3
71 #define EN_LBCK 4 /* Not on 1610/1710 */
72 /*#define EN_HSABCK 5*/
73 #define EN_APICK 6
74 #define EN_TIMCK 7
75 #define DMACK_REQ 8
76 #define EN_GPIOCK 9 /* Not on 1610/1710 */
77 /*#define EN_LBFREECK 10*/
78 #define EN_CKOUT_ARM 11
80 /* ARM_IDLECT3 bit shifts */
81 #define EN_OCPI_CK 0
82 #define EN_TC1_CK 2
83 #define EN_TC2_CK 4
85 /* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
86 #define EN_DSPTIMCK 5
88 /* Various register defines for clock controls scattered around OMAP chip */
89 #define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */
90 #define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */
91 #define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */
92 #define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */
93 #define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */
94 #define SWD_CLK_DIV_CTRL_SEL 0xfffe0874
95 #define COM_CLK_DIV_CTRL_SEL 0xfffe0878
96 #define SOFT_REQ_REG 0xfffe0834
97 #define SOFT_REQ_REG2 0xfffe0880
99 /*-------------------------------------------------------------------------
100 * Omap1 MPU rate table
101 *-------------------------------------------------------------------------*/
102 static struct mpu_rate rate_table[] = {
103 /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
104 * NOTE: Comment order here is different from bits in CKCTL value:
105 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
107 #if defined(CONFIG_OMAP_ARM_216MHZ)
108 { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
109 #endif
110 #if defined(CONFIG_OMAP_ARM_195MHZ)
111 { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
112 #endif
113 #if defined(CONFIG_OMAP_ARM_192MHZ)
114 { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
115 { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
116 { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
117 { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
118 { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
119 #endif
120 #if defined(CONFIG_OMAP_ARM_182MHZ)
121 { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
122 #endif
123 #if defined(CONFIG_OMAP_ARM_168MHZ)
124 { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
125 #endif
126 #if defined(CONFIG_OMAP_ARM_150MHZ)
127 { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
128 #endif
129 #if defined(CONFIG_OMAP_ARM_120MHZ)
130 { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
131 #endif
132 #if defined(CONFIG_OMAP_ARM_96MHZ)
133 { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
134 #endif
135 #if defined(CONFIG_OMAP_ARM_60MHZ)
136 { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
137 #endif
138 #if defined(CONFIG_OMAP_ARM_30MHZ)
139 { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
140 #endif
141 { 0, 0, 0, 0, 0 },
144 /*-------------------------------------------------------------------------
145 * Omap1 clocks
146 *-------------------------------------------------------------------------*/
148 static struct clk ck_ref = {
149 .name = "ck_ref",
150 .ops = &clkops_null,
151 .rate = 12000000,
154 static struct clk ck_dpll1 = {
155 .name = "ck_dpll1",
156 .ops = &clkops_null,
157 .parent = &ck_ref,
160 static struct arm_idlect1_clk ck_dpll1out = {
161 .clk = {
162 .name = "ck_dpll1out",
163 .ops = &clkops_generic,
164 .parent = &ck_dpll1,
165 .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
166 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
167 .enable_bit = EN_CKOUT_ARM,
168 .recalc = &followparent_recalc,
170 .idlect_shift = 12,
173 static struct clk sossi_ck = {
174 .name = "ck_sossi",
175 .ops = &clkops_generic,
176 .parent = &ck_dpll1out.clk,
177 .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
178 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
179 .enable_bit = 16,
180 .recalc = &omap1_sossi_recalc,
181 .set_rate = &omap1_set_sossi_rate,
184 static struct clk arm_ck = {
185 .name = "arm_ck",
186 .ops = &clkops_null,
187 .parent = &ck_dpll1,
188 .rate_offset = CKCTL_ARMDIV_OFFSET,
189 .recalc = &omap1_ckctl_recalc,
190 .round_rate = omap1_clk_round_rate_ckctl_arm,
191 .set_rate = omap1_clk_set_rate_ckctl_arm,
194 static struct arm_idlect1_clk armper_ck = {
195 .clk = {
196 .name = "armper_ck",
197 .ops = &clkops_generic,
198 .parent = &ck_dpll1,
199 .flags = CLOCK_IDLE_CONTROL,
200 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
201 .enable_bit = EN_PERCK,
202 .rate_offset = CKCTL_PERDIV_OFFSET,
203 .recalc = &omap1_ckctl_recalc,
204 .round_rate = omap1_clk_round_rate_ckctl_arm,
205 .set_rate = omap1_clk_set_rate_ckctl_arm,
207 .idlect_shift = 2,
210 static struct clk arm_gpio_ck = {
211 .name = "arm_gpio_ck",
212 .ops = &clkops_generic,
213 .parent = &ck_dpll1,
214 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
215 .enable_bit = EN_GPIOCK,
216 .recalc = &followparent_recalc,
219 static struct arm_idlect1_clk armxor_ck = {
220 .clk = {
221 .name = "armxor_ck",
222 .ops = &clkops_generic,
223 .parent = &ck_ref,
224 .flags = CLOCK_IDLE_CONTROL,
225 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
226 .enable_bit = EN_XORPCK,
227 .recalc = &followparent_recalc,
229 .idlect_shift = 1,
232 static struct arm_idlect1_clk armtim_ck = {
233 .clk = {
234 .name = "armtim_ck",
235 .ops = &clkops_generic,
236 .parent = &ck_ref,
237 .flags = CLOCK_IDLE_CONTROL,
238 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
239 .enable_bit = EN_TIMCK,
240 .recalc = &followparent_recalc,
242 .idlect_shift = 9,
245 static struct arm_idlect1_clk armwdt_ck = {
246 .clk = {
247 .name = "armwdt_ck",
248 .ops = &clkops_generic,
249 .parent = &ck_ref,
250 .flags = CLOCK_IDLE_CONTROL,
251 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
252 .enable_bit = EN_WDTCK,
253 .recalc = &omap1_watchdog_recalc,
255 .idlect_shift = 0,
258 static struct clk arminth_ck16xx = {
259 .name = "arminth_ck",
260 .ops = &clkops_null,
261 .parent = &arm_ck,
262 .recalc = &followparent_recalc,
263 /* Note: On 16xx the frequency can be divided by 2 by programming
264 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
266 * 1510 version is in TC clocks.
270 static struct clk dsp_ck = {
271 .name = "dsp_ck",
272 .ops = &clkops_generic,
273 .parent = &ck_dpll1,
274 .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
275 .enable_bit = EN_DSPCK,
276 .rate_offset = CKCTL_DSPDIV_OFFSET,
277 .recalc = &omap1_ckctl_recalc,
278 .round_rate = omap1_clk_round_rate_ckctl_arm,
279 .set_rate = omap1_clk_set_rate_ckctl_arm,
282 static struct clk dspmmu_ck = {
283 .name = "dspmmu_ck",
284 .ops = &clkops_null,
285 .parent = &ck_dpll1,
286 .rate_offset = CKCTL_DSPMMUDIV_OFFSET,
287 .recalc = &omap1_ckctl_recalc,
288 .round_rate = omap1_clk_round_rate_ckctl_arm,
289 .set_rate = omap1_clk_set_rate_ckctl_arm,
292 static struct clk dspper_ck = {
293 .name = "dspper_ck",
294 .ops = &clkops_dspck,
295 .parent = &ck_dpll1,
296 .enable_reg = DSP_IDLECT2,
297 .enable_bit = EN_PERCK,
298 .rate_offset = CKCTL_PERDIV_OFFSET,
299 .recalc = &omap1_ckctl_recalc_dsp_domain,
300 .round_rate = omap1_clk_round_rate_ckctl_arm,
301 .set_rate = &omap1_clk_set_rate_dsp_domain,
304 static struct clk dspxor_ck = {
305 .name = "dspxor_ck",
306 .ops = &clkops_dspck,
307 .parent = &ck_ref,
308 .enable_reg = DSP_IDLECT2,
309 .enable_bit = EN_XORPCK,
310 .recalc = &followparent_recalc,
313 static struct clk dsptim_ck = {
314 .name = "dsptim_ck",
315 .ops = &clkops_dspck,
316 .parent = &ck_ref,
317 .enable_reg = DSP_IDLECT2,
318 .enable_bit = EN_DSPTIMCK,
319 .recalc = &followparent_recalc,
322 /* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
323 static struct arm_idlect1_clk tc_ck = {
324 .clk = {
325 .name = "tc_ck",
326 .ops = &clkops_null,
327 .parent = &ck_dpll1,
328 .flags = CLOCK_IDLE_CONTROL,
329 .rate_offset = CKCTL_TCDIV_OFFSET,
330 .recalc = &omap1_ckctl_recalc,
331 .round_rate = omap1_clk_round_rate_ckctl_arm,
332 .set_rate = omap1_clk_set_rate_ckctl_arm,
334 .idlect_shift = 6,
337 static struct clk arminth_ck1510 = {
338 .name = "arminth_ck",
339 .ops = &clkops_null,
340 .parent = &tc_ck.clk,
341 .recalc = &followparent_recalc,
342 /* Note: On 1510 the frequency follows TC_CK
344 * 16xx version is in MPU clocks.
348 static struct clk tipb_ck = {
349 /* No-idle controlled by "tc_ck" */
350 .name = "tipb_ck",
351 .ops = &clkops_null,
352 .parent = &tc_ck.clk,
353 .recalc = &followparent_recalc,
356 static struct clk l3_ocpi_ck = {
357 /* No-idle controlled by "tc_ck" */
358 .name = "l3_ocpi_ck",
359 .ops = &clkops_generic,
360 .parent = &tc_ck.clk,
361 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
362 .enable_bit = EN_OCPI_CK,
363 .recalc = &followparent_recalc,
366 static struct clk tc1_ck = {
367 .name = "tc1_ck",
368 .ops = &clkops_generic,
369 .parent = &tc_ck.clk,
370 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
371 .enable_bit = EN_TC1_CK,
372 .recalc = &followparent_recalc,
375 static struct clk tc2_ck = {
376 .name = "tc2_ck",
377 .ops = &clkops_generic,
378 .parent = &tc_ck.clk,
379 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
380 .enable_bit = EN_TC2_CK,
381 .recalc = &followparent_recalc,
384 static struct clk dma_ck = {
385 /* No-idle controlled by "tc_ck" */
386 .name = "dma_ck",
387 .ops = &clkops_null,
388 .parent = &tc_ck.clk,
389 .recalc = &followparent_recalc,
392 static struct clk dma_lcdfree_ck = {
393 .name = "dma_lcdfree_ck",
394 .ops = &clkops_null,
395 .parent = &tc_ck.clk,
396 .recalc = &followparent_recalc,
399 static struct arm_idlect1_clk api_ck = {
400 .clk = {
401 .name = "api_ck",
402 .ops = &clkops_generic,
403 .parent = &tc_ck.clk,
404 .flags = CLOCK_IDLE_CONTROL,
405 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
406 .enable_bit = EN_APICK,
407 .recalc = &followparent_recalc,
409 .idlect_shift = 8,
412 static struct arm_idlect1_clk lb_ck = {
413 .clk = {
414 .name = "lb_ck",
415 .ops = &clkops_generic,
416 .parent = &tc_ck.clk,
417 .flags = CLOCK_IDLE_CONTROL,
418 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
419 .enable_bit = EN_LBCK,
420 .recalc = &followparent_recalc,
422 .idlect_shift = 4,
425 static struct clk rhea1_ck = {
426 .name = "rhea1_ck",
427 .ops = &clkops_null,
428 .parent = &tc_ck.clk,
429 .recalc = &followparent_recalc,
432 static struct clk rhea2_ck = {
433 .name = "rhea2_ck",
434 .ops = &clkops_null,
435 .parent = &tc_ck.clk,
436 .recalc = &followparent_recalc,
439 static struct clk lcd_ck_16xx = {
440 .name = "lcd_ck",
441 .ops = &clkops_generic,
442 .parent = &ck_dpll1,
443 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
444 .enable_bit = EN_LCDCK,
445 .rate_offset = CKCTL_LCDDIV_OFFSET,
446 .recalc = &omap1_ckctl_recalc,
447 .round_rate = omap1_clk_round_rate_ckctl_arm,
448 .set_rate = omap1_clk_set_rate_ckctl_arm,
451 static struct arm_idlect1_clk lcd_ck_1510 = {
452 .clk = {
453 .name = "lcd_ck",
454 .ops = &clkops_generic,
455 .parent = &ck_dpll1,
456 .flags = CLOCK_IDLE_CONTROL,
457 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
458 .enable_bit = EN_LCDCK,
459 .rate_offset = CKCTL_LCDDIV_OFFSET,
460 .recalc = &omap1_ckctl_recalc,
461 .round_rate = omap1_clk_round_rate_ckctl_arm,
462 .set_rate = omap1_clk_set_rate_ckctl_arm,
464 .idlect_shift = 3,
467 static struct clk uart1_1510 = {
468 .name = "uart1_ck",
469 .ops = &clkops_null,
470 /* Direct from ULPD, no real parent */
471 .parent = &armper_ck.clk,
472 .rate = 12000000,
473 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
474 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
475 .enable_bit = 29, /* Chooses between 12MHz and 48MHz */
476 .set_rate = &omap1_set_uart_rate,
477 .recalc = &omap1_uart_recalc,
480 static struct uart_clk uart1_16xx = {
481 .clk = {
482 .name = "uart1_ck",
483 .ops = &clkops_uart,
484 /* Direct from ULPD, no real parent */
485 .parent = &armper_ck.clk,
486 .rate = 48000000,
487 .flags = RATE_FIXED | ENABLE_REG_32BIT |
488 CLOCK_NO_IDLE_PARENT,
489 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
490 .enable_bit = 29,
492 .sysc_addr = 0xfffb0054,
495 static struct clk uart2_ck = {
496 .name = "uart2_ck",
497 .ops = &clkops_null,
498 /* Direct from ULPD, no real parent */
499 .parent = &armper_ck.clk,
500 .rate = 12000000,
501 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
502 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
503 .enable_bit = 30, /* Chooses between 12MHz and 48MHz */
504 .set_rate = &omap1_set_uart_rate,
505 .recalc = &omap1_uart_recalc,
508 static struct clk uart3_1510 = {
509 .name = "uart3_ck",
510 .ops = &clkops_null,
511 /* Direct from ULPD, no real parent */
512 .parent = &armper_ck.clk,
513 .rate = 12000000,
514 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
515 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
516 .enable_bit = 31, /* Chooses between 12MHz and 48MHz */
517 .set_rate = &omap1_set_uart_rate,
518 .recalc = &omap1_uart_recalc,
521 static struct uart_clk uart3_16xx = {
522 .clk = {
523 .name = "uart3_ck",
524 .ops = &clkops_uart,
525 /* Direct from ULPD, no real parent */
526 .parent = &armper_ck.clk,
527 .rate = 48000000,
528 .flags = RATE_FIXED | ENABLE_REG_32BIT |
529 CLOCK_NO_IDLE_PARENT,
530 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
531 .enable_bit = 31,
533 .sysc_addr = 0xfffb9854,
536 static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
537 .name = "usb_clko",
538 .ops = &clkops_generic,
539 /* Direct from ULPD, no parent */
540 .rate = 6000000,
541 .flags = RATE_FIXED | ENABLE_REG_32BIT,
542 .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
543 .enable_bit = USB_MCLK_EN_BIT,
546 static struct clk usb_hhc_ck1510 = {
547 .name = "usb_hhc_ck",
548 .ops = &clkops_generic,
549 /* Direct from ULPD, no parent */
550 .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
551 .flags = RATE_FIXED | ENABLE_REG_32BIT,
552 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
553 .enable_bit = USB_HOST_HHC_UHOST_EN,
556 static struct clk usb_hhc_ck16xx = {
557 .name = "usb_hhc_ck",
558 .ops = &clkops_generic,
559 /* Direct from ULPD, no parent */
560 .rate = 48000000,
561 /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
562 .flags = RATE_FIXED | ENABLE_REG_32BIT,
563 .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
564 .enable_bit = 8 /* UHOST_EN */,
567 static struct clk usb_dc_ck = {
568 .name = "usb_dc_ck",
569 .ops = &clkops_generic,
570 /* Direct from ULPD, no parent */
571 .rate = 48000000,
572 .flags = RATE_FIXED,
573 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
574 .enable_bit = 4,
577 static struct clk mclk_1510 = {
578 .name = "mclk",
579 .ops = &clkops_generic,
580 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
581 .rate = 12000000,
582 .flags = RATE_FIXED,
583 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
584 .enable_bit = 6,
587 static struct clk mclk_16xx = {
588 .name = "mclk",
589 .ops = &clkops_generic,
590 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
591 .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
592 .enable_bit = COM_ULPD_PLL_CLK_REQ,
593 .set_rate = &omap1_set_ext_clk_rate,
594 .round_rate = &omap1_round_ext_clk_rate,
595 .init = &omap1_init_ext_clk,
598 static struct clk bclk_1510 = {
599 .name = "bclk",
600 .ops = &clkops_generic,
601 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
602 .rate = 12000000,
603 .flags = RATE_FIXED,
606 static struct clk bclk_16xx = {
607 .name = "bclk",
608 .ops = &clkops_generic,
609 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
610 .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
611 .enable_bit = SWD_ULPD_PLL_CLK_REQ,
612 .set_rate = &omap1_set_ext_clk_rate,
613 .round_rate = &omap1_round_ext_clk_rate,
614 .init = &omap1_init_ext_clk,
617 static struct clk mmc1_ck = {
618 .name = "mmc_ck",
619 .ops = &clkops_generic,
620 /* Functional clock is direct from ULPD, interface clock is ARMPER */
621 .parent = &armper_ck.clk,
622 .rate = 48000000,
623 .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
624 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
625 .enable_bit = 23,
628 static struct clk mmc2_ck = {
629 .name = "mmc_ck",
630 .id = 1,
631 .ops = &clkops_generic,
632 /* Functional clock is direct from ULPD, interface clock is ARMPER */
633 .parent = &armper_ck.clk,
634 .rate = 48000000,
635 .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
636 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
637 .enable_bit = 20,
640 static struct clk virtual_ck_mpu = {
641 .name = "mpu",
642 .ops = &clkops_null,
643 .parent = &arm_ck, /* Is smarter alias for */
644 .recalc = &followparent_recalc,
645 .set_rate = &omap1_select_table_rate,
646 .round_rate = &omap1_round_to_table_rate,
649 /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
650 remains active during MPU idle whenever this is enabled */
651 static struct clk i2c_fck = {
652 .name = "i2c_fck",
653 .id = 1,
654 .ops = &clkops_null,
655 .flags = CLOCK_NO_IDLE_PARENT,
656 .parent = &armxor_ck.clk,
657 .recalc = &followparent_recalc,
660 static struct clk i2c_ick = {
661 .name = "i2c_ick",
662 .id = 1,
663 .ops = &clkops_null,
664 .flags = CLOCK_NO_IDLE_PARENT,
665 .parent = &armper_ck.clk,
666 .recalc = &followparent_recalc,
669 #endif