arch/arm/mach-pxa/saar.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/saar.c
   3  *
   4  *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
   5  *
   6  *  Copyright (C) 2007-2008 Marvell International Ltd.
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  publishhed by the Free Software Foundation.
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/kernel.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/clk.h>
  19 #include <linux/gpio.h>
  20 #include <linux/delay.h>
  21 #include <linux/fb.h>
  22 #include <linux/i2c.h>
  23 #include <linux/smc91x.h>
  24 #include <linux/mfd/da903x.h>
  25
  26 #include <asm/mach-types.h>
  27 #include <asm/mach/arch.h>
  28
  29 #include <mach/pxa930.h>
  30 #include <plat/i2c.h>
  31 #include <mach/pxafb.h>
  32
  33 #include "devices.h"
  34 #include "generic.h"
  35
  36 #define GPIO_LCD_RESET  (16)
  37
  38 /* SAAR MFP configurations */
  39 static mfp_cfg_t saar_mfp_cfg[] __initdata = {
  40         /* LCD */
  41         GPIO23_LCD_DD0,
  42         GPIO24_LCD_DD1,
  43         GPIO25_LCD_DD2,
  44         GPIO26_LCD_DD3,
  45         GPIO27_LCD_DD4,
  46         GPIO28_LCD_DD5,
  47         GPIO29_LCD_DD6,
  48         GPIO44_LCD_DD7,
  49         GPIO21_LCD_CS,
  50         GPIO22_LCD_VSYNC,
  51         GPIO17_LCD_FCLK_RD,
  52         GPIO18_LCD_LCLK_A0,
  53         GPIO19_LCD_PCLK_WR,
  54         GPIO16_GPIO, /* LCD reset */
  55
  56         /* Ethernet */
  57         DF_nCS1_nCS3,
  58         GPIO97_GPIO,
  59 };
  60
  61 #define SAAR_ETH_PHYS   (0x14000000)
  62
  63 static struct resource smc91x_resources[] = {
  64         [0] = {
  65                 .start  = (SAAR_ETH_PHYS + 0x300),
  66                 .end    = (SAAR_ETH_PHYS + 0xfffff),
  67                 .flags  = IORESOURCE_MEM,
  68         },
  69         [1] = {
  70                 .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
  71                 .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
  72                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  73         }
  74 };
  75
  76 static struct smc91x_platdata saar_smc91x_info = {
  77         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
  78 };
  79
  80 static struct platform_device smc91x_device = {
  81         .name           = "smc91x",
  82         .id             = 0,
  83         .num_resources  = ARRAY_SIZE(smc91x_resources),
  84         .resource       = smc91x_resources,
  85         .dev            = {
  86                 .platform_data = &saar_smc91x_info,
  87         },
  88 };
  89
  90 #if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
  91 static uint16_t lcd_power_on[] = {
  92         /* single frame */
  93         SMART_CMD_NOOP,
  94         SMART_CMD(0x00),
  95         SMART_DELAY(0),
  96
  97         SMART_CMD_NOOP,
  98         SMART_CMD(0x00),
  99         SMART_DELAY(0),
 100
 101         SMART_CMD_NOOP,
 102         SMART_CMD(0x00),
 103         SMART_DELAY(0),
 104
 105         SMART_CMD_NOOP,
 106         SMART_CMD(0x00),
 107         SMART_DELAY(10),
 108
 109         /* calibration control */
 110         SMART_CMD(0x00),
 111         SMART_CMD(0xA4),
 112         SMART_DAT(0x80),
 113         SMART_DAT(0x01),
 114         SMART_DELAY(150),
 115
 116         /*Power-On Init sequence*/
 117         SMART_CMD(0x00),        /* output ctrl */
 118         SMART_CMD(0x01),
 119         SMART_DAT(0x01),
 120         SMART_DAT(0x00),
 121         SMART_CMD(0x00),        /* wave ctrl */
 122         SMART_CMD(0x02),
 123         SMART_DAT(0x07),
 124         SMART_DAT(0x00),
 125         SMART_CMD(0x00),
 126         SMART_CMD(0x03),        /* entry mode */
 127         SMART_DAT(0xD0),
 128         SMART_DAT(0x30),
 129         SMART_CMD(0x00),
 130         SMART_CMD(0x08),        /* display ctrl 2 */
 131         SMART_DAT(0x08),
 132         SMART_DAT(0x08),
 133         SMART_CMD(0x00),
 134         SMART_CMD(0x09),        /* display ctrl 3 */
 135         SMART_DAT(0x04),
 136         SMART_DAT(0x2F),
 137         SMART_CMD(0x00),
 138         SMART_CMD(0x0A),        /* display ctrl 4 */
 139         SMART_DAT(0x00),
 140         SMART_DAT(0x08),
 141         SMART_CMD(0x00),
 142         SMART_CMD(0x0D),        /* Frame Marker position */
 143         SMART_DAT(0x00),
 144         SMART_DAT(0x08),
 145         SMART_CMD(0x00),
 146         SMART_CMD(0x60),        /* Driver output control */
 147         SMART_DAT(0x27),
 148         SMART_DAT(0x00),
 149         SMART_CMD(0x00),
 150         SMART_CMD(0x61),        /* Base image display control */
 151         SMART_DAT(0x00),
 152         SMART_DAT(0x01),
 153         SMART_CMD(0x00),
 154         SMART_CMD(0x30),        /* Y settings 30h-3Dh */
 155         SMART_DAT(0x07),
 156         SMART_DAT(0x07),
 157         SMART_CMD(0x00),
 158         SMART_CMD(0x31),
 159         SMART_DAT(0x00),
 160         SMART_DAT(0x07),
 161         SMART_CMD(0x00),
 162         SMART_CMD(0x32),        /* Timing(3), ASW HOLD=0.5CLK */
 163         SMART_DAT(0x04),
 164         SMART_DAT(0x00),
 165         SMART_CMD(0x00),
 166         SMART_CMD(0x33),        /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
 167         SMART_DAT(0x03),
 168         SMART_DAT(0x03),
 169         SMART_CMD(0x00),
 170         SMART_CMD(0x34),
 171         SMART_DAT(0x00),
 172         SMART_DAT(0x00),
 173         SMART_CMD(0x00),
 174         SMART_CMD(0x35),
 175         SMART_DAT(0x02),
 176         SMART_DAT(0x05),
 177         SMART_CMD(0x00),
 178         SMART_CMD(0x36),
 179         SMART_DAT(0x1F),
 180         SMART_DAT(0x1F),
 181         SMART_CMD(0x00),
 182         SMART_CMD(0x37),
 183         SMART_DAT(0x07),
 184         SMART_DAT(0x07),
 185         SMART_CMD(0x00),
 186         SMART_CMD(0x38),
 187         SMART_DAT(0x00),
 188         SMART_DAT(0x07),
 189         SMART_CMD(0x00),
 190         SMART_CMD(0x39),
 191         SMART_DAT(0x04),
 192         SMART_DAT(0x00),
 193         SMART_CMD(0x00),
 194         SMART_CMD(0x3A),
 195         SMART_DAT(0x03),
 196         SMART_DAT(0x03),
 197         SMART_CMD(0x00),
 198         SMART_CMD(0x3B),
 199         SMART_DAT(0x00),
 200         SMART_DAT(0x00),
 201         SMART_CMD(0x00),
 202         SMART_CMD(0x3C),
 203         SMART_DAT(0x02),
 204         SMART_DAT(0x05),
 205         SMART_CMD(0x00),
 206         SMART_CMD(0x3D),
 207         SMART_DAT(0x1F),
 208         SMART_DAT(0x1F),
 209         SMART_CMD(0x00),        /* Display control 1 */
 210         SMART_CMD(0x07),
 211         SMART_DAT(0x00),
 212         SMART_DAT(0x01),
 213         SMART_CMD(0x00),        /* Power control 5 */
 214         SMART_CMD(0x17),
 215         SMART_DAT(0x00),
 216         SMART_DAT(0x01),
 217         SMART_CMD(0x00),        /* Power control 1 */
 218         SMART_CMD(0x10),
 219         SMART_DAT(0x10),
 220         SMART_DAT(0xB0),
 221         SMART_CMD(0x00),        /* Power control 2 */
 222         SMART_CMD(0x11),
 223         SMART_DAT(0x01),
 224         SMART_DAT(0x30),
 225         SMART_CMD(0x00),        /* Power control 3 */
 226         SMART_CMD(0x12),
 227         SMART_DAT(0x01),
 228         SMART_DAT(0x9E),
 229         SMART_CMD(0x00),        /* Power control 4 */
 230         SMART_CMD(0x13),
 231         SMART_DAT(0x17),
 232         SMART_DAT(0x00),
 233         SMART_CMD(0x00),        /* Power control 3 */
 234         SMART_CMD(0x12),
 235         SMART_DAT(0x01),
 236         SMART_DAT(0xBE),
 237         SMART_DELAY(100),
 238
 239         /* display mode : 240*320 */
 240         SMART_CMD(0x00),        /* RAM address set(H) 0*/
 241         SMART_CMD(0x20),
 242         SMART_DAT(0x00),
 243         SMART_DAT(0x00),
 244         SMART_CMD(0x00),        /* RAM address set(V)   4*/
 245         SMART_CMD(0x21),
 246         SMART_DAT(0x00),
 247         SMART_DAT(0x00),
 248         SMART_CMD(0x00),        /* Start of Window RAM address set(H) 8*/
 249         SMART_CMD(0x50),
 250         SMART_DAT(0x00),
 251         SMART_DAT(0x00),
 252         SMART_CMD(0x00),        /* End of Window RAM address set(H) 12*/
 253         SMART_CMD(0x51),
 254         SMART_DAT(0x00),
 255         SMART_DAT(0xEF),
 256         SMART_CMD(0x00),        /* Start of Window RAM address set(V) 16*/
 257         SMART_CMD(0x52),
 258         SMART_DAT(0x00),
 259         SMART_DAT(0x00),
 260         SMART_CMD(0x00),        /* End of Window RAM address set(V) 20*/
 261         SMART_CMD(0x53),
 262         SMART_DAT(0x01),
 263         SMART_DAT(0x3F),
 264         SMART_CMD(0x00),        /* Panel interface control 1 */
 265         SMART_CMD(0x90),
 266         SMART_DAT(0x00),
 267         SMART_DAT(0x1A),
 268         SMART_CMD(0x00),        /* Panel interface control 2 */
 269         SMART_CMD(0x92),
 270         SMART_DAT(0x04),
 271         SMART_DAT(0x00),
 272         SMART_CMD(0x00),        /* Panel interface control 3 */
 273         SMART_CMD(0x93),
 274         SMART_DAT(0x00),
 275         SMART_DAT(0x05),
 276         SMART_DELAY(20),
 277 };
 278
 279 static uint16_t lcd_panel_on[] = {
 280         SMART_CMD(0x00),
 281         SMART_CMD(0x07),
 282         SMART_DAT(0x00),
 283         SMART_DAT(0x21),
 284         SMART_DELAY(1),
 285
 286         SMART_CMD(0x00),
 287         SMART_CMD(0x07),
 288         SMART_DAT(0x00),
 289         SMART_DAT(0x61),
 290         SMART_DELAY(100),
 291
 292         SMART_CMD(0x00),
 293         SMART_CMD(0x07),
 294         SMART_DAT(0x01),
 295         SMART_DAT(0x73),
 296         SMART_DELAY(1),
 297 };
 298
 299 static uint16_t lcd_panel_off[] = {
 300         SMART_CMD(0x00),
 301         SMART_CMD(0x07),
 302         SMART_DAT(0x00),
 303         SMART_DAT(0x72),
 304         SMART_DELAY(40),
 305
 306         SMART_CMD(0x00),
 307         SMART_CMD(0x07),
 308         SMART_DAT(0x00),
 309         SMART_DAT(0x01),
 310         SMART_DELAY(1),
 311
 312         SMART_CMD(0x00),
 313         SMART_CMD(0x07),
 314         SMART_DAT(0x00),
 315         SMART_DAT(0x00),
 316         SMART_DELAY(1),
 317 };
 318
 319 static uint16_t lcd_power_off[] = {
 320         SMART_CMD(0x00),
 321         SMART_CMD(0x10),
 322         SMART_DAT(0x00),
 323         SMART_DAT(0x80),
 324
 325         SMART_CMD(0x00),
 326         SMART_CMD(0x11),
 327         SMART_DAT(0x01),
 328         SMART_DAT(0x60),
 329
 330         SMART_CMD(0x00),
 331         SMART_CMD(0x12),
 332         SMART_DAT(0x01),
 333         SMART_DAT(0xAE),
 334         SMART_DELAY(40),
 335
 336         SMART_CMD(0x00),
 337         SMART_CMD(0x10),
 338         SMART_DAT(0x00),
 339         SMART_DAT(0x00),
 340 };
 341
 342 static uint16_t update_framedata[] = {
 343         /* set display ram: 240*320 */
 344         SMART_CMD(0x00), /* RAM address set(H) 0*/
 345         SMART_CMD(0x20),
 346         SMART_DAT(0x00),
 347         SMART_DAT(0x00),
 348         SMART_CMD(0x00), /* RAM address set(V) 4*/
 349         SMART_CMD(0x21),
 350         SMART_DAT(0x00),
 351         SMART_DAT(0x00),
 352         SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
 353         SMART_CMD(0x50),
 354         SMART_DAT(0x00),
 355         SMART_DAT(0x00),
 356         SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
 357         SMART_CMD(0x51),
 358         SMART_DAT(0x00),
 359         SMART_DAT(0xEF),
 360         SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
 361         SMART_CMD(0x52),
 362         SMART_DAT(0x00),
 363         SMART_DAT(0x00),
 364         SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
 365         SMART_CMD(0x53),
 366         SMART_DAT(0x01),
 367         SMART_DAT(0x3F),
 368
 369         /* wait for vsync cmd before transferring frame data */
 370         SMART_CMD_WAIT_FOR_VSYNC,
 371
 372         /* write ram */
 373         SMART_CMD(0x00),
 374         SMART_CMD(0x22),
 375
 376         /* write frame data */
 377         SMART_CMD_WRITE_FRAME,
 378 };
 379
 380 static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
 381 {
 382         static int pin_requested = 0;
 383         struct fb_info *info = container_of(var, struct fb_info, var);
 384         int err;
 385
 386         if (!pin_requested) {
 387                 err = gpio_request(GPIO_LCD_RESET, "lcd reset");
 388                 if (err) {
 389                         pr_err("failed to request gpio for LCD reset\n");
 390                         return;
 391                 }
 392
 393                 gpio_direction_output(GPIO_LCD_RESET, 0);
 394                 pin_requested = 1;
 395         }
 396
 397         if (on) {
 398                 gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
 399                 gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
 400
 401                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
 402                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
 403         } else {
 404                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
 405                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
 406         }
 407
 408         err = pxafb_smart_flush(info);
 409         if (err)
 410                 pr_err("%s: timed out\n", __func__);
 411 }
 412
 413 static void ltm022a97a_update(struct fb_info *info)
 414 {
 415         pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
 416         pxafb_smart_flush(info);
 417 }
 418
 419 static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
 420         [0] = {
 421                 .xres                   = 240,
 422                 .yres                   = 320,
 423                 .bpp                    = 16,
 424                 .a0csrd_set_hld         = 30,
 425                 .a0cswr_set_hld         = 30,
 426                 .wr_pulse_width         = 30,
 427                 .rd_pulse_width         = 30,
 428                 .op_hold_time           = 30,
 429                 .cmd_inh_time           = 60,
 430
 431                 /* L_LCLK_A0 and L_LCLK_RD active low */
 432                 .sync                   = FB_SYNC_HOR_HIGH_ACT |
 433                                           FB_SYNC_VERT_HIGH_ACT,
 434         },
 435 };
 436
 437 static struct pxafb_mach_info saar_lcd_info = {
 438         .modes                  = toshiba_ltm022a97a_modes,
 439         .num_modes              = 1,
 440         .lcd_conn               = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
 441         .pxafb_lcd_power        = ltm022a97a_lcd_power,
 442         .smart_update           = ltm022a97a_update,
 443 };
 444
 445 static void __init saar_init_lcd(void)
 446 {
 447         set_pxa_fb_info(&saar_lcd_info);
 448 }
 449 #else
 450 static inline void saar_init_lcd(void) {}
 451 #endif
 452
 453 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
 454 static struct da903x_subdev_info saar_da9034_subdevs[] = {
 455         [0] = {
 456                 .name           = "da903x-backlight",
 457                 .id             = DA9034_ID_WLED,
 458         },
 459 };
 460
 461 static struct da903x_platform_data saar_da9034_info = {
 462         .num_subdevs    = ARRAY_SIZE(saar_da9034_subdevs),
 463         .subdevs        = saar_da9034_subdevs,
 464 };
 465
 466 static struct i2c_board_info saar_i2c_info[] = {
 467         [0] = {
 468                 .type           = "da9034",
 469                 .addr           = 0x34,
 470                 .platform_data  = &saar_da9034_info,
 471                 .irq            = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
 472         },
 473 };
 474
 475 static void __init saar_init_i2c(void)
 476 {
 477         pxa_set_i2c_info(NULL);
 478         i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
 479 }
 480 #else
 481 static inline void saar_init_i2c(void) {}
 482 #endif
 483 static void __init saar_init(void)
 484 {
 485         /* initialize MFP configurations */
 486         pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
 487
 488         platform_device_register(&smc91x_device);
 489
 490         saar_init_i2c();
 491         saar_init_lcd();
 492 }
 493
 494 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 495         /* Maintainer: Eric Miao <eric.miao@marvell.com> */
 496         .phys_io        = 0x40000000,
 497         .boot_params    = 0xa0000100,
 498         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 499         .map_io         = pxa_map_io,
 500         .init_irq       = pxa3xx_init_irq,
 501         .timer          = &pxa_timer,
 502         .init_machine   = saar_init,
 503 MACHINE_END