[ARM] pxa: update defconfig for Verdex Pro

[linux-2.6/verdex.git] / arch / frv / mb93090-mb00 / pci-vdk.c

/* pci-vdk.c: MB93090-MB00 (VDK) PCI support
 *
 * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
 * Written by David Howells (dhowells@redhat.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>

#include <asm/segment.h>
#include <asm/io.h>
#include <asm/mb-regs.h>
#include <asm/mb86943a.h>
#include "pci-frv.h"

unsigned int __nongpreldata pci_probe = 1;

int  __nongpreldata pcibios_last_bus = -1;
struct pci_bus *__nongpreldata pci_root_bus;
struct pci_ops *__nongpreldata pci_root_ops;

/*
 * The accessible PCI window does not cover the entire CPU address space, but
 * there are devices we want to access outside of that window, so we need to
 * insert specific PCI bus resources instead of using the platform-level bus
 * resources directly for the PCI root bus.
 *
 * These are configured and inserted by pcibios_init() and are attached to the
 * root bus by pcibios_fixup_bus().
 */
static struct resource pci_ioport_resource = {
        .name   = "PCI IO",
        .start  = 0,
        .end    = IO_SPACE_LIMIT,
        .flags  = IORESOURCE_IO,
};

static struct resource pci_iomem_resource = {
        .name   = "PCI mem",
        .start  = 0,
        .end    = -1,
        .flags  = IORESOURCE_MEM,
};

/*
 * Functions for accessing PCI configuration space
 */

#define CONFIG_CMD(bus, dev, where) \
        (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))

#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80)

#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88)

#define __set_PciCfgDataB(A,V) \
        writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3)))

#define __set_PciCfgDataW(A,V) \
        writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2)))

#define __set_PciCfgDataL(A,V) \
        writel((V), (volatile void __iomem *) __region_CS1 + 0x88)

#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A))

#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))

static inline int __query(const struct pci_dev *dev)
{
//      return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0));
//      return dev->bus->number==1;
//      return dev->bus->number==0 &&
//              (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0));
        return 0;
}

/*****************************************************************************/
/*
 *
 */
static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
                               u32 *val)
{
        u32 _value;

        if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
                _value = __get_PciBridgeDataL(where & ~3);
        }
        else {
                __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
                _value = __get_PciCfgDataL(where & ~3);
        }

        switch (size) {
        case 1:
                _value = _value >> ((where & 3) * 8);
                break;

        case 2:
                _value = _value >> ((where & 2) * 8);
                break;

        case 4:
                break;

        default:
                BUG();
        }

        *val = _value;
        return PCIBIOS_SUCCESSFUL;
}

static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
                                u32 value)
{
        switch (size) {
        case 1:
                if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
                        __set_PciBridgeDataB(where, value);
                }
                else {
                        __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
                        __set_PciCfgDataB(where, value);
                }
                break;

        case 2:
                if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
                        __set_PciBridgeDataW(where, value);
                }
                else {
                        __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
                        __set_PciCfgDataW(where, value);
                }
                break;

        case 4:
                if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
                        __set_PciBridgeDataL(where, value);
                }
                else {
                        __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
                        __set_PciCfgDataL(where, value);
                }
                break;

        default:
                BUG();
        }

        return PCIBIOS_SUCCESSFUL;
}

static struct pci_ops pci_direct_frv = {
        pci_frv_read_config,
        pci_frv_write_config,
};

/*
 * Before we decide to use direct hardware access mechanisms, we try to do some
 * trivial checks to ensure it at least _seems_ to be working -- we just test
 * whether bus 00 contains a host bridge (this is similar to checking
 * techniques used in XFree86, but ours should be more reliable since we
 * attempt to make use of direct access hints provided by the PCI BIOS).
 *
 * This should be close to trivial, but it isn't, because there are buggy
 * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
 */
static int __init pci_sanity_check(struct pci_ops *o)
{
        struct pci_bus bus;             /* Fake bus and device */
        u32 id;

        bus.number      = 0;

        if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) {
                printk("PCI: VDK Bridge device:vendor: %08x\n", id);
                if (id == 0x200e10cf)
                        return 1;
        }

        printk("PCI: VDK Bridge: Sanity check failed\n");
        return 0;
}

static struct pci_ops * __init pci_check_direct(void)
{
        unsigned long flags;

        local_irq_save(flags);

        /* check if access works */
        if (pci_sanity_check(&pci_direct_frv)) {
                local_irq_restore(flags);
                printk("PCI: Using configuration frv\n");
//              request_mem_region(0xBE040000, 256, "FRV bridge");
//              request_mem_region(0xBFFFFFF4, 12, "PCI frv");
                return &pci_direct_frv;
        }

        local_irq_restore(flags);
        return NULL;
}

/*
 * Discover remaining PCI buses in case there are peer host bridges.
 * We use the number of last PCI bus provided by the PCI BIOS.
 */
static void __init pcibios_fixup_peer_bridges(void)
{
        struct pci_bus bus;
        struct pci_dev dev;
        int n;
        u16 l;

        if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
                return;
        printk("PCI: Peer bridge fixup\n");
        for (n=0; n <= pcibios_last_bus; n++) {
                if (pci_find_bus(0, n))
                        continue;
                bus.number = n;
                bus.ops = pci_root_ops;
                dev.bus = &bus;
                for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
                        if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
                            l != 0x0000 && l != 0xffff) {
                                printk("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
                                printk("PCI: Discovered peer bus %02x\n", n);
                                pci_scan_bus(n, pci_root_ops, NULL);
                                break;
                        }
        }
}

/*
 * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
 */

static void __init pci_fixup_umc_ide(struct pci_dev *d)
{
        /*
         * UM8886BF IDE controller sets region type bits incorrectly,
         * therefore they look like memory despite of them being I/O.
         */
        int i;

        printk("PCI: Fixing base address flags for device %s\n", pci_name(d));
        for(i=0; i<4; i++)
                d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
}

static void __init pci_fixup_ide_bases(struct pci_dev *d)
{
        int i;

        /*
         * PCI IDE controllers use non-standard I/O port decoding, respect it.
         */
        if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
                return;
        printk("PCI: IDE base address fixup for %s\n", pci_name(d));
        for(i=0; i<4; i++) {
                struct resource *r = &d->resource[i];
                if ((r->start & ~0x80) == 0x374) {
                        r->start |= 2;
                        r->end = r->start;
                }
        }
}

static void __init pci_fixup_ide_trash(struct pci_dev *d)
{
        int i;

        /*
         * There exist PCI IDE controllers which have utter garbage
         * in first four base registers. Ignore that.
         */
        printk("PCI: IDE base address trash cleared for %s\n", pci_name(d));
        for(i=0; i<4; i++)
                d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
}

static void __devinit  pci_fixup_latency(struct pci_dev *d)
{
        /*
         *  SiS 5597 and 5598 chipsets require latency timer set to
         *  at most 32 to avoid lockups.
         */
        DBG("PCI: Setting max latency to 32\n");
        pcibios_max_latency = 32;
}

DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);

/*
 *  Called after each bus is probed, but before its children
 *  are examined.
 */

void __init pcibios_fixup_bus(struct pci_bus *bus)
{
#if 0
        printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
#endif

        if (bus->number == 0) {
                bus->resource[0] = &pci_ioport_resource;
                bus->resource[1] = &pci_iomem_resource;
        }

        pci_read_bridge_bases(bus);

        if (bus->number == 0) {
                struct list_head *ln;
                struct pci_dev *dev;
                for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
                        dev = pci_dev_b(ln);
                        if (dev->devfn == 0) {
                                dev->resource[0].start = 0;
                                dev->resource[0].end = 0;
                        }
                }
        }
}

/*
 * Initialization. Try all known PCI access methods. Note that we support
 * using both PCI BIOS and direct access: in such cases, we use I/O ports
 * to access config space, but we still keep BIOS order of cards to be
 * compatible with 2.0.X. This should go away some day.
 */

int __init pcibios_init(void)
{
        struct pci_ops *dir = NULL;

        if (!mb93090_mb00_detected)
                return -ENXIO;

        __reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP;

        __reg_MB86943_ecs_base(1)       = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000;
        __reg_MB86943_ecs_base(2)       = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000;

        *(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000;
        *(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000;

        __reg_MB86943_sl_pci_io_base    = (__region_CS2 + 0x04000000) >> 9;
        __reg_MB86943_sl_pci_mem_base   = (__region_CS2 + 0x08000000) >> 9;
        __reg_MB86943_pci_sl_io_base    = __region_CS2 + 0x04000000;
        __reg_MB86943_pci_sl_mem_base   = __region_CS2 + 0x08000000;
        mb();

        /* enable PCI arbitration */
        __reg_MB86943_pci_arbiter       = MB86943_PCIARB_EN;

        pci_ioport_resource.start       = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
        pci_ioport_resource.end         = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
        pci_ioport_resource.end         += pci_ioport_resource.start;

        printk("PCI IO window:  %08llx-%08llx\n",
               (unsigned long long) pci_ioport_resource.start,
               (unsigned long long) pci_ioport_resource.end);

        pci_iomem_resource.start        = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
        pci_iomem_resource.end          = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
        pci_iomem_resource.end          += pci_iomem_resource.start;

        /* Reserve somewhere to write to flush posted writes.  This is used by
         * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
         * CPU-PCI bridge to flush as this doesn't happen automatically when a
         * read is performed on the MB93090 development kit motherboard.
         */
        pci_iomem_resource.start        += 0x400;

        printk("PCI MEM window: %08llx-%08llx\n",
               (unsigned long long) pci_iomem_resource.start,
               (unsigned long long) pci_iomem_resource.end);
        printk("PCI DMA memory: %08lx-%08lx\n",
               dma_coherent_mem_start, dma_coherent_mem_end);

        if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
                panic("Unable to insert PCI IOMEM resource\n");
        if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
                panic("Unable to insert PCI IOPORT resource\n");

        if (!pci_probe)
                return -ENXIO;

        dir = pci_check_direct();
        if (dir)
                pci_root_ops = dir;
        else {
                printk("PCI: No PCI bus detected\n");
                return -ENXIO;
        }

        printk("PCI: Probing PCI hardware\n");
        pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL);

        pcibios_irq_init();
        pcibios_fixup_peer_bridges();
        pcibios_fixup_irqs();
        pcibios_resource_survey();

        return 0;
}

arch_initcall(pcibios_init);

char * __init pcibios_setup(char *str)
{
        if (!strcmp(str, "off")) {
                pci_probe = 0;
                return NULL;
        } else if (!strncmp(str, "lastbus=", 8)) {
                pcibios_last_bus = simple_strtol(str+8, NULL, 0);
                return NULL;
        }
        return str;
}

int pcibios_enable_device(struct pci_dev *dev, int mask)
{
        int err;

        if ((err = pci_enable_resources(dev, mask)) < 0)
                return err;
        if (!dev->msi_enabled)
                pcibios_enable_irq(dev);
        return 0;
}