| blob | d13cb11ce623509fbb39baf780ede87958a2a532 |
1 /*
2 * Lite5200B board Device Tree Source
3 *
4 * Copyright 2006-2007 Secret Lab Technologies Ltd.
5 * Grant Likely <grant.likely@secretlab.ca>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 */
13 /dts-v1/;
15 / {
16 model = "fsl,lite5200b";
17 compatible = "fsl,lite5200b";
18 #address-cells = <1>;
19 #size-cells = <1>;
20 interrupt-parent = <&mpc5200_pic>;
22 cpus {
23 #address-cells = <1>;
24 #size-cells = <0>;
26 PowerPC,5200@0 {
27 device_type = "cpu";
28 reg = <0>;
29 d-cache-line-size = <32>;
30 i-cache-line-size = <32>;
31 d-cache-size = <0x4000>; // L1, 16K
32 i-cache-size = <0x4000>; // L1, 16K
33 timebase-frequency = <0>; // from bootloader
34 bus-frequency = <0>; // from bootloader
35 clock-frequency = <0>; // from bootloader
36 };
37 };
39 memory {
40 device_type = "memory";
41 reg = <0x00000000 0x10000000>; // 256MB
42 };
44 soc5200@f0000000 {
45 #address-cells = <1>;
46 #size-cells = <1>;
47 compatible = "fsl,mpc5200b-immr";
48 ranges = <0 0xf0000000 0x0000c000>;
49 reg = <0xf0000000 0x00000100>;
50 bus-frequency = <0>; // from bootloader
51 system-frequency = <0>; // from bootloader
53 cdm@200 {
54 compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
55 reg = <0x200 0x38>;
56 };
58 mpc5200_pic: interrupt-controller@500 {
59 // 5200 interrupts are encoded into two levels;
60 interrupt-controller;
61 #interrupt-cells = <3>;
62 compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
63 reg = <0x500 0x80>;
64 };
66 timer@600 { // General Purpose Timer
67 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
68 reg = <0x600 0x10>;
69 interrupts = <1 9 0>;
70 fsl,has-wdt;
71 };
73 timer@610 { // General Purpose Timer
74 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
75 reg = <0x610 0x10>;
76 interrupts = <1 10 0>;
77 };
79 timer@620 { // General Purpose Timer
80 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
81 reg = <0x620 0x10>;
82 interrupts = <1 11 0>;
83 };
85 timer@630 { // General Purpose Timer
86 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
87 reg = <0x630 0x10>;
88 interrupts = <1 12 0>;
89 };
91 timer@640 { // General Purpose Timer
92 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
93 reg = <0x640 0x10>;
94 interrupts = <1 13 0>;
95 };
97 timer@650 { // General Purpose Timer
98 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
99 reg = <0x650 0x10>;
100 interrupts = <1 14 0>;
101 };
103 timer@660 { // General Purpose Timer
104 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
105 reg = <0x660 0x10>;
106 interrupts = <1 15 0>;
107 };
109 timer@670 { // General Purpose Timer
110 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
111 reg = <0x670 0x10>;
112 interrupts = <1 16 0>;
113 };
115 rtc@800 { // Real time clock
116 compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
117 reg = <0x800 0x100>;
118 interrupts = <1 5 0 1 6 0>;
119 };
121 can@900 {
122 compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
123 interrupts = <2 17 0>;
124 reg = <0x900 0x80>;
125 };
127 can@980 {
128 compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
129 interrupts = <2 18 0>;
130 reg = <0x980 0x80>;
131 };
133 gpio_simple: gpio@b00 {
134 compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
135 reg = <0xb00 0x40>;
136 interrupts = <1 7 0>;
137 gpio-controller;
138 #gpio-cells = <2>;
139 };
141 gpio_wkup: gpio@c00 {
142 compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
143 reg = <0xc00 0x40>;
144 interrupts = <1 8 0 0 3 0>;
145 gpio-controller;
146 #gpio-cells = <2>;
147 };
149 spi@f00 {
150 compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
151 reg = <0xf00 0x20>;
152 interrupts = <2 13 0 2 14 0>;
153 };
155 usb@1000 {
156 compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
157 reg = <0x1000 0xff>;
158 interrupts = <2 6 0>;
159 };
161 dma-controller@1200 {
162 compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
163 reg = <0x1200 0x80>;
164 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
165 3 4 0 3 5 0 3 6 0 3 7 0
166 3 8 0 3 9 0 3 10 0 3 11 0
167 3 12 0 3 13 0 3 14 0 3 15 0>;
168 };
170 xlb@1f00 {
171 compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
172 reg = <0x1f00 0x100>;
173 };
175 serial@2000 { // PSC1
176 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
177 cell-index = <0>;
178 reg = <0x2000 0x100>;
179 interrupts = <2 1 0>;
180 };
182 // PSC2 in ac97 mode example
183 //ac97@2200 { // PSC2
184 // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
185 // cell-index = <1>;
186 // reg = <0x2200 0x100>;
187 // interrupts = <2 2 0>;
188 //};
190 // PSC3 in CODEC mode example
191 //i2s@2400 { // PSC3
192 // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
193 // cell-index = <2>;
194 // reg = <0x2400 0x100>;
195 // interrupts = <2 3 0>;
196 //};
198 // PSC4 in uart mode example
199 //serial@2600 { // PSC4
200 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
201 // cell-index = <3>;
202 // reg = <0x2600 0x100>;
203 // interrupts = <2 11 0>;
204 //};
206 // PSC5 in uart mode example
207 //serial@2800 { // PSC5
208 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
209 // cell-index = <4>;
210 // reg = <0x2800 0x100>;
211 // interrupts = <2 12 0>;
212 //};
214 // PSC6 in spi mode example
215 //spi@2c00 { // PSC6
216 // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
217 // cell-index = <5>;
218 // reg = <0x2c00 0x100>;
219 // interrupts = <2 4 0>;
220 //};
222 ethernet@3000 {
223 compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
224 reg = <0x3000 0x400>;
225 local-mac-address = [ 00 00 00 00 00 00 ];
226 interrupts = <2 5 0>;
227 phy-handle = <&phy0>;
228 };
230 mdio@3000 {
231 #address-cells = <1>;
232 #size-cells = <0>;
233 compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
234 reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
235 interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
237 phy0: ethernet-phy@0 {
238 reg = <0>;
239 };
240 };
242 ata@3a00 {
243 compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
244 reg = <0x3a00 0x100>;
245 interrupts = <2 7 0>;
246 };
248 i2c@3d00 {
249 #address-cells = <1>;
250 #size-cells = <0>;
251 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
252 reg = <0x3d00 0x40>;
253 interrupts = <2 15 0>;
254 fsl5200-clocking;
255 };
257 i2c@3d40 {
258 #address-cells = <1>;
259 #size-cells = <0>;
260 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
261 reg = <0x3d40 0x40>;
262 interrupts = <2 16 0>;
263 fsl5200-clocking;
264 };
266 sram@8000 {
267 compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
268 reg = <0x8000 0x4000>;
269 };
270 };
272 pci@f0000d00 {
273 #interrupt-cells = <1>;
274 #size-cells = <2>;
275 #address-cells = <3>;
276 device_type = "pci";
277 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
278 reg = <0xf0000d00 0x100>;
279 interrupt-map-mask = <0xf800 0 0 7>;
280 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
281 0xc000 0 0 2 &mpc5200_pic 1 1 3
282 0xc000 0 0 3 &mpc5200_pic 1 2 3
283 0xc000 0 0 4 &mpc5200_pic 1 3 3
285 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
286 0xc800 0 0 2 &mpc5200_pic 1 2 3
287 0xc800 0 0 3 &mpc5200_pic 1 3 3
288 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
289 clock-frequency = <0>; // From boot loader
290 interrupts = <2 8 0 2 9 0 2 10 0>;
291 bus-range = <0 0>;
292 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
293 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
294 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
295 };
297 localbus {
298 compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
300 #address-cells = <2>;
301 #size-cells = <1>;
303 ranges = <0 0 0xfe000000 0x02000000>;
305 flash@0,0 {
306 compatible = "cfi-flash";
307 reg = <0 0 0x02000000>;
308 bank-width = <1>;
309 #size-cells = <1>;
310 #address-cells = <1>;
312 partition@0 {
313 label = "kernel";
314 reg = <0x00000000 0x00200000>;
315 };
316 partition@200000 {
317 label = "rootfs";
318 reg = <0x00200000 0x01d00000>;
319 };
320 partition@1f00000 {
321 label = "u-boot";
322 reg = <0x01f00000 0x00060000>;
323 };
324 partition@1f60000 {
325 label = "u-boot-env";
326 reg = <0x01f60000 0x00020000>;
327 };
328 partition@1f80000 {
329 label = "dtb";
330 reg = <0x01f80000 0x00080000>;
331 };
332 };
333 };
335 };