| blob | ee5538feb4555fa89a9198d08a5d8181fa054fbc |
1 /*
2 * SBC8641D Device Tree Source
3 *
4 * Copyright 2008 Wind River Systems Inc.
5 *
6 * Paul Gortmaker (see MAINTAINERS for contact information)
7 *
8 * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
16 /dts-v1/;
18 / {
19 model = "SBC8641D";
20 compatible = "wind,sbc8641";
21 #address-cells = <1>;
22 #size-cells = <1>;
24 aliases {
25 ethernet0 = &enet0;
26 ethernet1 = &enet1;
27 ethernet2 = &enet2;
28 ethernet3 = &enet3;
29 serial0 = &serial0;
30 serial1 = &serial1;
31 pci0 = &pci0;
32 pci1 = &pci1;
33 };
35 cpus {
36 #address-cells = <1>;
37 #size-cells = <0>;
39 PowerPC,8641@0 {
40 device_type = "cpu";
41 reg = <0>;
42 d-cache-line-size = <32>;
43 i-cache-line-size = <32>;
44 d-cache-size = <32768>; // L1
45 i-cache-size = <32768>; // L1
46 timebase-frequency = <0>; // From uboot
47 bus-frequency = <0>; // From uboot
48 clock-frequency = <0>; // From uboot
49 };
50 PowerPC,8641@1 {
51 device_type = "cpu";
52 reg = <1>;
53 d-cache-line-size = <32>;
54 i-cache-line-size = <32>;
55 d-cache-size = <32768>;
56 i-cache-size = <32768>;
57 timebase-frequency = <0>; // From uboot
58 bus-frequency = <0>; // From uboot
59 clock-frequency = <0>; // From uboot
60 };
61 };
63 memory {
64 device_type = "memory";
65 reg = <0x00000000 0x20000000>; // 512M at 0x0
66 };
68 localbus@f8005000 {
69 #address-cells = <2>;
70 #size-cells = <1>;
71 compatible = "fsl,mpc8641-localbus", "simple-bus";
72 reg = <0xf8005000 0x1000>;
73 interrupts = <19 2>;
74 interrupt-parent = <&mpic>;
76 ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
77 1 0 0xf0000000 0x00010000 // 64KB EEPROM
78 2 0 0xf1000000 0x00100000 // EPLD (1MB)
79 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3)
80 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4)
81 6 0 0xf4000000 0x00100000 // LCD display (1MB)
82 7 0 0xe8000000 0x04000000>; // 64MB OneNAND
84 flash@0,0 {
85 compatible = "cfi-flash";
86 reg = <0 0 0x01000000>;
87 bank-width = <2>;
88 device-width = <2>;
89 #address-cells = <1>;
90 #size-cells = <1>;
91 partition@0 {
92 label = "dtb";
93 reg = <0x00000000 0x00100000>;
94 read-only;
95 };
96 partition@300000 {
97 label = "kernel";
98 reg = <0x00100000 0x00400000>;
99 read-only;
100 };
101 partition@400000 {
102 label = "fs";
103 reg = <0x00500000 0x00a00000>;
104 };
105 partition@700000 {
106 label = "firmware";
107 reg = <0x00f00000 0x00100000>;
108 read-only;
109 };
110 };
112 epld@2,0 {
113 compatible = "wrs,epld-localbus";
114 #address-cells = <2>;
115 #size-cells = <1>;
116 reg = <2 0 0x100000>;
117 ranges = <0 0 5 0 1 // User switches
118 1 0 5 1 1 // Board ID/Rev
119 3 0 5 3 1>; // LEDs
120 };
121 };
123 soc@f8000000 {
124 #address-cells = <1>;
125 #size-cells = <1>;
126 device_type = "soc";
127 compatible = "simple-bus";
128 ranges = <0x00000000 0xf8000000 0x00100000>;
129 bus-frequency = <0>;
131 mcm-law@0 {
132 compatible = "fsl,mcm-law";
133 reg = <0x0 0x1000>;
134 fsl,num-laws = <10>;
135 };
137 mcm@1000 {
138 compatible = "fsl,mpc8641-mcm", "fsl,mcm";
139 reg = <0x1000 0x1000>;
140 interrupts = <17 2>;
141 interrupt-parent = <&mpic>;
142 };
144 i2c@3000 {
145 #address-cells = <1>;
146 #size-cells = <0>;
147 cell-index = <0>;
148 compatible = "fsl-i2c";
149 reg = <0x3000 0x100>;
150 interrupts = <43 2>;
151 interrupt-parent = <&mpic>;
152 dfsrr;
153 };
155 i2c@3100 {
156 #address-cells = <1>;
157 #size-cells = <0>;
158 cell-index = <1>;
159 compatible = "fsl-i2c";
160 reg = <0x3100 0x100>;
161 interrupts = <43 2>;
162 interrupt-parent = <&mpic>;
163 dfsrr;
164 };
166 dma@21300 {
167 #address-cells = <1>;
168 #size-cells = <1>;
169 compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
170 reg = <0x21300 0x4>;
171 ranges = <0x0 0x21100 0x200>;
172 cell-index = <0>;
173 dma-channel@0 {
174 compatible = "fsl,mpc8641-dma-channel",
175 "fsl,eloplus-dma-channel";
176 reg = <0x0 0x80>;
177 cell-index = <0>;
178 interrupt-parent = <&mpic>;
179 interrupts = <20 2>;
180 };
181 dma-channel@80 {
182 compatible = "fsl,mpc8641-dma-channel",
183 "fsl,eloplus-dma-channel";
184 reg = <0x80 0x80>;
185 cell-index = <1>;
186 interrupt-parent = <&mpic>;
187 interrupts = <21 2>;
188 };
189 dma-channel@100 {
190 compatible = "fsl,mpc8641-dma-channel",
191 "fsl,eloplus-dma-channel";
192 reg = <0x100 0x80>;
193 cell-index = <2>;
194 interrupt-parent = <&mpic>;
195 interrupts = <22 2>;
196 };
197 dma-channel@180 {
198 compatible = "fsl,mpc8641-dma-channel",
199 "fsl,eloplus-dma-channel";
200 reg = <0x180 0x80>;
201 cell-index = <3>;
202 interrupt-parent = <&mpic>;
203 interrupts = <23 2>;
204 };
205 };
207 enet0: ethernet@24000 {
208 #address-cells = <1>;
209 #size-cells = <1>;
210 cell-index = <0>;
211 device_type = "network";
212 model = "TSEC";
213 compatible = "gianfar";
214 reg = <0x24000 0x1000>;
215 ranges = <0x0 0x24000 0x1000>;
216 local-mac-address = [ 00 00 00 00 00 00 ];
217 interrupts = <29 2 30 2 34 2>;
218 interrupt-parent = <&mpic>;
219 tbi-handle = <&tbi0>;
220 phy-handle = <&phy0>;
221 phy-connection-type = "rgmii-id";
223 mdio@520 {
224 #address-cells = <1>;
225 #size-cells = <0>;
226 compatible = "fsl,gianfar-mdio";
227 reg = <0x520 0x20>;
229 phy0: ethernet-phy@1f {
230 interrupt-parent = <&mpic>;
231 interrupts = <10 1>;
232 reg = <0x1f>;
233 device_type = "ethernet-phy";
234 };
235 phy1: ethernet-phy@0 {
236 interrupt-parent = <&mpic>;
237 interrupts = <10 1>;
238 reg = <0>;
239 device_type = "ethernet-phy";
240 };
241 phy2: ethernet-phy@1 {
242 interrupt-parent = <&mpic>;
243 interrupts = <10 1>;
244 reg = <1>;
245 device_type = "ethernet-phy";
246 };
247 phy3: ethernet-phy@2 {
248 interrupt-parent = <&mpic>;
249 interrupts = <10 1>;
250 reg = <2>;
251 device_type = "ethernet-phy";
252 };
253 tbi0: tbi-phy@11 {
254 reg = <0x11>;
255 device_type = "tbi-phy";
256 };
257 };
258 };
260 enet1: ethernet@25000 {
261 #address-cells = <1>;
262 #size-cells = <1>;
263 cell-index = <1>;
264 device_type = "network";
265 model = "TSEC";
266 compatible = "gianfar";
267 reg = <0x25000 0x1000>;
268 ranges = <0x0 0x25000 0x1000>;
269 local-mac-address = [ 00 00 00 00 00 00 ];
270 interrupts = <35 2 36 2 40 2>;
271 interrupt-parent = <&mpic>;
272 tbi-handle = <&tbi1>;
273 phy-handle = <&phy1>;
274 phy-connection-type = "rgmii-id";
276 mdio@520 {
277 #address-cells = <1>;
278 #size-cells = <0>;
279 compatible = "fsl,gianfar-tbi";
280 reg = <0x520 0x20>;
282 tbi1: tbi-phy@11 {
283 reg = <0x11>;
284 device_type = "tbi-phy";
285 };
286 };
287 };
289 enet2: ethernet@26000 {
290 #address-cells = <1>;
291 #size-cells = <1>;
292 cell-index = <2>;
293 device_type = "network";
294 model = "TSEC";
295 compatible = "gianfar";
296 reg = <0x26000 0x1000>;
297 ranges = <0x0 0x26000 0x1000>;
298 local-mac-address = [ 00 00 00 00 00 00 ];
299 interrupts = <31 2 32 2 33 2>;
300 interrupt-parent = <&mpic>;
301 tbi-handle = <&tbi2>;
302 phy-handle = <&phy2>;
303 phy-connection-type = "rgmii-id";
305 mdio@520 {
306 #address-cells = <1>;
307 #size-cells = <0>;
308 compatible = "fsl,gianfar-tbi";
309 reg = <0x520 0x20>;
311 tbi2: tbi-phy@11 {
312 reg = <0x11>;
313 device_type = "tbi-phy";
314 };
315 };
316 };
318 enet3: ethernet@27000 {
319 #address-cells = <1>;
320 #size-cells = <1>;
321 cell-index = <3>;
322 device_type = "network";
323 model = "TSEC";
324 compatible = "gianfar";
325 reg = <0x27000 0x1000>;
326 ranges = <0x0 0x27000 0x1000>;
327 local-mac-address = [ 00 00 00 00 00 00 ];
328 interrupts = <37 2 38 2 39 2>;
329 interrupt-parent = <&mpic>;
330 tbi-handle = <&tbi3>;
331 phy-handle = <&phy3>;
332 phy-connection-type = "rgmii-id";
334 mdio@520 {
335 #address-cells = <1>;
336 #size-cells = <0>;
337 compatible = "fsl,gianfar-tbi";
338 reg = <0x520 0x20>;
340 tbi3: tbi-phy@11 {
341 reg = <0x11>;
342 device_type = "tbi-phy";
343 };
344 };
345 };
347 serial0: serial@4500 {
348 cell-index = <0>;
349 device_type = "serial";
350 compatible = "ns16550";
351 reg = <0x4500 0x100>;
352 clock-frequency = <0>;
353 interrupts = <42 2>;
354 interrupt-parent = <&mpic>;
355 };
357 serial1: serial@4600 {
358 cell-index = <1>;
359 device_type = "serial";
360 compatible = "ns16550";
361 reg = <0x4600 0x100>;
362 clock-frequency = <0>;
363 interrupts = <28 2>;
364 interrupt-parent = <&mpic>;
365 };
367 mpic: pic@40000 {
368 clock-frequency = <0>;
369 interrupt-controller;
370 #address-cells = <0>;
371 #interrupt-cells = <2>;
372 reg = <0x40000 0x40000>;
373 compatible = "chrp,open-pic";
374 device_type = "open-pic";
375 big-endian;
376 };
378 global-utilities@e0000 {
379 compatible = "fsl,mpc8641-guts";
380 reg = <0xe0000 0x1000>;
381 fsl,has-rstcr;
382 };
383 };
385 pci0: pcie@f8008000 {
386 compatible = "fsl,mpc8641-pcie";
387 device_type = "pci";
388 #interrupt-cells = <1>;
389 #size-cells = <2>;
390 #address-cells = <3>;
391 reg = <0xf8008000 0x1000>;
392 bus-range = <0x0 0xff>;
393 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
394 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
395 clock-frequency = <33333333>;
396 interrupt-parent = <&mpic>;
397 interrupts = <24 2>;
398 interrupt-map-mask = <0xff00 0 0 7>;
399 interrupt-map = <
400 /* IDSEL 0x0 */
401 0x0000 0 0 1 &mpic 0 1
402 0x0000 0 0 2 &mpic 1 1
403 0x0000 0 0 3 &mpic 2 1
404 0x0000 0 0 4 &mpic 3 1
405 >;
407 pcie@0 {
408 reg = <0 0 0 0 0>;
409 #size-cells = <2>;
410 #address-cells = <3>;
411 device_type = "pci";
412 ranges = <0x02000000 0x0 0x80000000
413 0x02000000 0x0 0x80000000
414 0x0 0x20000000
416 0x01000000 0x0 0x00000000
417 0x01000000 0x0 0x00000000
418 0x0 0x00100000>;
419 };
421 };
423 pci1: pcie@f8009000 {
424 compatible = "fsl,mpc8641-pcie";
425 device_type = "pci";
426 #interrupt-cells = <1>;
427 #size-cells = <2>;
428 #address-cells = <3>;
429 reg = <0xf8009000 0x1000>;
430 bus-range = <0 0xff>;
431 ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
432 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
433 clock-frequency = <33333333>;
434 interrupt-parent = <&mpic>;
435 interrupts = <25 2>;
436 interrupt-map-mask = <0xf800 0 0 7>;
437 interrupt-map = <
438 /* IDSEL 0x0 */
439 0x0000 0 0 1 &mpic 4 1
440 0x0000 0 0 2 &mpic 5 1
441 0x0000 0 0 3 &mpic 6 1
442 0x0000 0 0 4 &mpic 7 1
443 >;
445 pcie@0 {
446 reg = <0 0 0 0 0>;
447 #size-cells = <2>;
448 #address-cells = <3>;
449 device_type = "pci";
450 ranges = <0x02000000 0x0 0xa0000000
451 0x02000000 0x0 0xa0000000
452 0x0 0x20000000
454 0x01000000 0x0 0x00000000
455 0x01000000 0x0 0x00000000
456 0x0 0x00100000>;
457 };
458 };
459 };