drivers/input/touchscreen/mcs5000_ts.c

   1 /*
   2  * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
   3  *
   4  * Copyright (C) 2009 Samsung Electronics Co.Ltd
   5  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
   6  *
   7  * Based on wm97xx-core.c
   8  *
   9  *  This program is free software; you can redistribute  it and/or modify it
  10  *  under  the terms of  the GNU General  Public License as published by the
  11  *  Free Software Foundation;  either version 2 of the  License, or (at your
  12  *  option) any later version.
  13  *
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/init.h>
  18 #include <linux/i2c.h>
  19 #include <linux/i2c/mcs5000_ts.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/input.h>
  22 #include <linux/irq.h>
  23
  24 /* Registers */
  25 #define MCS5000_TS_STATUS               0x00
  26 #define STATUS_OFFSET                   0
  27 #define STATUS_NO                       (0 << STATUS_OFFSET)
  28 #define STATUS_INIT                     (1 << STATUS_OFFSET)
  29 #define STATUS_SENSING                  (2 << STATUS_OFFSET)
  30 #define STATUS_COORD                    (3 << STATUS_OFFSET)
  31 #define STATUS_GESTURE                  (4 << STATUS_OFFSET)
  32 #define ERROR_OFFSET                    4
  33 #define ERROR_NO                        (0 << ERROR_OFFSET)
  34 #define ERROR_POWER_ON_RESET            (1 << ERROR_OFFSET)
  35 #define ERROR_INT_RESET                 (2 << ERROR_OFFSET)
  36 #define ERROR_EXT_RESET                 (3 << ERROR_OFFSET)
  37 #define ERROR_INVALID_REG_ADDRESS       (8 << ERROR_OFFSET)
  38 #define ERROR_INVALID_REG_VALUE         (9 << ERROR_OFFSET)
  39
  40 #define MCS5000_TS_OP_MODE              0x01
  41 #define RESET_OFFSET                    0
  42 #define RESET_NO                        (0 << RESET_OFFSET)
  43 #define RESET_EXT_SOFT                  (1 << RESET_OFFSET)
  44 #define OP_MODE_OFFSET                  1
  45 #define OP_MODE_SLEEP                   (0 << OP_MODE_OFFSET)
  46 #define OP_MODE_ACTIVE                  (1 << OP_MODE_OFFSET)
  47 #define GESTURE_OFFSET                  4
  48 #define GESTURE_DISABLE                 (0 << GESTURE_OFFSET)
  49 #define GESTURE_ENABLE                  (1 << GESTURE_OFFSET)
  50 #define PROXIMITY_OFFSET                5
  51 #define PROXIMITY_DISABLE               (0 << PROXIMITY_OFFSET)
  52 #define PROXIMITY_ENABLE                (1 << PROXIMITY_OFFSET)
  53 #define SCAN_MODE_OFFSET                6
  54 #define SCAN_MODE_INTERRUPT             (0 << SCAN_MODE_OFFSET)
  55 #define SCAN_MODE_POLLING               (1 << SCAN_MODE_OFFSET)
  56 #define REPORT_RATE_OFFSET              7
  57 #define REPORT_RATE_40                  (0 << REPORT_RATE_OFFSET)
  58 #define REPORT_RATE_80                  (1 << REPORT_RATE_OFFSET)
  59
  60 #define MCS5000_TS_SENS_CTL             0x02
  61 #define MCS5000_TS_FILTER_CTL           0x03
  62 #define PRI_FILTER_OFFSET               0
  63 #define SEC_FILTER_OFFSET               4
  64
  65 #define MCS5000_TS_X_SIZE_UPPER         0x08
  66 #define MCS5000_TS_X_SIZE_LOWER         0x09
  67 #define MCS5000_TS_Y_SIZE_UPPER         0x0A
  68 #define MCS5000_TS_Y_SIZE_LOWER         0x0B
  69
  70 #define MCS5000_TS_INPUT_INFO           0x10
  71 #define INPUT_TYPE_OFFSET               0
  72 #define INPUT_TYPE_NONTOUCH             (0 << INPUT_TYPE_OFFSET)
  73 #define INPUT_TYPE_SINGLE               (1 << INPUT_TYPE_OFFSET)
  74 #define INPUT_TYPE_DUAL                 (2 << INPUT_TYPE_OFFSET)
  75 #define INPUT_TYPE_PALM                 (3 << INPUT_TYPE_OFFSET)
  76 #define INPUT_TYPE_PROXIMITY            (7 << INPUT_TYPE_OFFSET)
  77 #define GESTURE_CODE_OFFSET             3
  78 #define GESTURE_CODE_NO                 (0 << GESTURE_CODE_OFFSET)
  79
  80 #define MCS5000_TS_X_POS_UPPER          0x11
  81 #define MCS5000_TS_X_POS_LOWER          0x12
  82 #define MCS5000_TS_Y_POS_UPPER          0x13
  83 #define MCS5000_TS_Y_POS_LOWER          0x14
  84 #define MCS5000_TS_Z_POS                0x15
  85 #define MCS5000_TS_WIDTH                0x16
  86 #define MCS5000_TS_GESTURE_VAL          0x17
  87 #define MCS5000_TS_MODULE_REV           0x20
  88 #define MCS5000_TS_FIRMWARE_VER         0x21
  89
  90 /* Touchscreen absolute values */
  91 #define MCS5000_MAX_XC                  0x3ff
  92 #define MCS5000_MAX_YC                  0x3ff
  93
  94 enum mcs5000_ts_read_offset {
  95         READ_INPUT_INFO,
  96         READ_X_POS_UPPER,
  97         READ_X_POS_LOWER,
  98         READ_Y_POS_UPPER,
  99         READ_Y_POS_LOWER,
 100         READ_BLOCK_SIZE,
 101 };
 102
 103 /* Each client has this additional data */
 104 struct mcs5000_ts_data {
 105         struct i2c_client *client;
 106         struct input_dev *input_dev;
 107         const struct mcs5000_ts_platform_data *platform_data;
 108 };
 109
 110 static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
 111 {
 112         struct mcs5000_ts_data *data = dev_id;
 113         struct i2c_client *client = data->client;
 114         u8 buffer[READ_BLOCK_SIZE];
 115         int err;
 116         int x;
 117         int y;
 118
 119         err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
 120                         READ_BLOCK_SIZE, buffer);
 121         if (err < 0) {
 122                 dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
 123                 goto out;
 124         }
 125
 126         switch (buffer[READ_INPUT_INFO]) {
 127         case INPUT_TYPE_NONTOUCH:
 128                 input_report_key(data->input_dev, BTN_TOUCH, 0);
 129                 input_sync(data->input_dev);
 130                 break;
 131
 132         case INPUT_TYPE_SINGLE:
 133                 x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
 134                 y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
 135
 136                 input_report_key(data->input_dev, BTN_TOUCH, 1);
 137                 input_report_abs(data->input_dev, ABS_X, x);
 138                 input_report_abs(data->input_dev, ABS_Y, y);
 139                 input_sync(data->input_dev);
 140                 break;
 141
 142         case INPUT_TYPE_DUAL:
 143                 /* TODO */
 144                 break;
 145
 146         case INPUT_TYPE_PALM:
 147                 /* TODO */
 148                 break;
 149
 150         case INPUT_TYPE_PROXIMITY:
 151                 /* TODO */
 152                 break;
 153
 154         default:
 155                 dev_err(&client->dev, "Unknown ts input type %d\n",
 156                                 buffer[READ_INPUT_INFO]);
 157                 break;
 158         }
 159
 160  out:
 161         return IRQ_HANDLED;
 162 }
 163
 164 static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
 165 {
 166         const struct mcs5000_ts_platform_data *platform_data =
 167                 data->platform_data;
 168         struct i2c_client *client = data->client;
 169
 170         /* Touch reset & sleep mode */
 171         i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
 172                         RESET_EXT_SOFT | OP_MODE_SLEEP);
 173
 174         /* Touch size */
 175         i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
 176                         platform_data->x_size >> 8);
 177         i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
 178                         platform_data->x_size & 0xff);
 179         i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
 180                         platform_data->y_size >> 8);
 181         i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
 182                         platform_data->y_size & 0xff);
 183
 184         /* Touch active mode & 80 report rate */
 185         i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
 186                         OP_MODE_ACTIVE | REPORT_RATE_80);
 187 }
 188
 189 static int __devinit mcs5000_ts_probe(struct i2c_client *client,
 190                 const struct i2c_device_id *id)
 191 {
 192         struct mcs5000_ts_data *data;
 193         struct input_dev *input_dev;
 194         int ret;
 195
 196         if (!client->dev.platform_data)
 197                 return -EINVAL;
 198
 199         data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
 200         input_dev = input_allocate_device();
 201         if (!data || !input_dev) {
 202                 dev_err(&client->dev, "Failed to allocate memory\n");
 203                 ret = -ENOMEM;
 204                 goto err_free_mem;
 205         }
 206
 207         data->client = client;
 208         data->input_dev = input_dev;
 209         data->platform_data = client->dev.platform_data;
 210
 211         input_dev->name = "MELPAS MCS-5000 Touchscreen";
 212         input_dev->id.bustype = BUS_I2C;
 213         input_dev->dev.parent = &client->dev;
 214
 215         __set_bit(EV_ABS, input_dev->evbit);
 216         __set_bit(EV_KEY, input_dev->evbit);
 217         __set_bit(BTN_TOUCH, input_dev->keybit);
 218         input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
 219         input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
 220
 221         input_set_drvdata(input_dev, data);
 222
 223         if (data->platform_data->cfg_pin)
 224                 data->platform_data->cfg_pin();
 225
 226         ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt,
 227                         IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data);
 228
 229         if (ret < 0) {
 230                 dev_err(&client->dev, "Failed to register interrupt\n");
 231                 goto err_free_mem;
 232         }
 233
 234         ret = input_register_device(data->input_dev);
 235         if (ret < 0)
 236                 goto err_free_irq;
 237
 238         mcs5000_ts_phys_init(data);
 239         i2c_set_clientdata(client, data);
 240
 241         return 0;
 242
 243 err_free_irq:
 244         free_irq(client->irq, data);
 245 err_free_mem:
 246         input_free_device(input_dev);
 247         kfree(data);
 248         return ret;
 249 }
 250
 251 static int __devexit mcs5000_ts_remove(struct i2c_client *client)
 252 {
 253         struct mcs5000_ts_data *data = i2c_get_clientdata(client);
 254
 255         free_irq(client->irq, data);
 256         input_unregister_device(data->input_dev);
 257         kfree(data);
 258         i2c_set_clientdata(client, NULL);
 259
 260         return 0;
 261 }
 262
 263 #ifdef CONFIG_PM
 264 static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg)
 265 {
 266         /* Touch sleep mode */
 267         i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
 268
 269         return 0;
 270 }
 271
 272 static int mcs5000_ts_resume(struct i2c_client *client)
 273 {
 274         struct mcs5000_ts_data *data = i2c_get_clientdata(client);
 275
 276         mcs5000_ts_phys_init(data);
 277
 278         return 0;
 279 }
 280 #else
 281 #define mcs5000_ts_suspend      NULL
 282 #define mcs5000_ts_resume       NULL
 283 #endif
 284
 285 static const struct i2c_device_id mcs5000_ts_id[] = {
 286         { "mcs5000_ts", 0 },
 287         { }
 288 };
 289 MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
 290
 291 static struct i2c_driver mcs5000_ts_driver = {
 292         .probe          = mcs5000_ts_probe,
 293         .remove         = __devexit_p(mcs5000_ts_remove),
 294         .suspend        = mcs5000_ts_suspend,
 295         .resume         = mcs5000_ts_resume,
 296         .driver = {
 297                 .name = "mcs5000_ts",
 298         },
 299         .id_table       = mcs5000_ts_id,
 300 };
 301
 302 static int __init mcs5000_ts_init(void)
 303 {
 304         return i2c_add_driver(&mcs5000_ts_driver);
 305 }
 306
 307 static void __exit mcs5000_ts_exit(void)
 308 {
 309         i2c_del_driver(&mcs5000_ts_driver);
 310 }
 311
 312 module_init(mcs5000_ts_init);
 313 module_exit(mcs5000_ts_exit);
 314
 315 /* Module information */
 316 MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
 317 MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
 318 MODULE_LICENSE("GPL");