?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[ARM] pxa: update defconfig for Verdex Pro
[linux-2.6/verdex.git] / drivers / isdn / hardware / eicon / os_pri.c
blob5d65405c75f466c3df2aa33faeb62d24dbbe1db4
1 /* $Id: os_pri.c,v 1.32 2004/03/21 17:26:01 armin Exp $ */
2
3 #include "platform.h"
4 #include "debuglib.h"
5 #include "cardtype.h"
6 #include "pc.h"
7 #include "pr_pc.h"
8 #include "di_defs.h"
9 #include "dsp_defs.h"
10 #include "di.h"
11 #include "io.h"
12
13 #include "xdi_msg.h"
14 #include "xdi_adapter.h"
15 #include "os_pri.h"
16 #include "diva_pci.h"
17 #include "mi_pc.h"
18 #include "pc_maint.h"
19 #include "dsp_tst.h"
20 #include "diva_dma.h"
21 #include "dsrv_pri.h"
22
23 /* --------------------------------------------------------------------------
24 OS Dependent part of XDI driver for DIVA PRI Adapter
25
26 DSP detection/validation by Anthony Booth (Eicon Networks, www.eicon.com)
27 -------------------------------------------------------------------------- */
28
29 #define DIVA_PRI_NO_PCI_BIOS_WORKAROUND 1
30
31 extern int diva_card_read_xlog(diva_os_xdi_adapter_t * a);
32
33 /*
34 ** IMPORTS
35 */
36 extern void prepare_pri_functions(PISDN_ADAPTER IoAdapter);
37 extern void prepare_pri2_functions(PISDN_ADAPTER IoAdapter);
38 extern void diva_xdi_display_adapter_features(int card);
39
40 static int diva_pri_cleanup_adapter(diva_os_xdi_adapter_t * a);
41 static int diva_pri_cmd_card_proc(struct _diva_os_xdi_adapter *a,
42 diva_xdi_um_cfg_cmd_t * cmd, int length);
43 static int pri_get_serial_number(diva_os_xdi_adapter_t * a);
44 static int diva_pri_stop_adapter(diva_os_xdi_adapter_t * a);
45 static dword diva_pri_detect_dsps(diva_os_xdi_adapter_t * a);
46
47 /*
48 ** Check card revision
49 */
50 static int pri_is_rev_2_card(int card_ordinal)
51 {
52 switch (card_ordinal) {
53 case CARDTYPE_DIVASRV_P_30M_V2_PCI:
54 case CARDTYPE_DIVASRV_VOICE_P_30M_V2_PCI:
55 return (1);
56 }
57 return (0);
58 }
59
60 static void diva_pri_set_addresses(diva_os_xdi_adapter_t * a)
61 {
62 a->resources.pci.mem_type_id[MEM_TYPE_ADDRESS] = 0;
63 a->resources.pci.mem_type_id[MEM_TYPE_CONTROL] = 2;
64 a->resources.pci.mem_type_id[MEM_TYPE_CONFIG] = 4;
65 a->resources.pci.mem_type_id[MEM_TYPE_RAM] = 0;
66 a->resources.pci.mem_type_id[MEM_TYPE_RESET] = 2;
67 a->resources.pci.mem_type_id[MEM_TYPE_CFG] = 4;
68 a->resources.pci.mem_type_id[MEM_TYPE_PROM] = 3;
69
70 a->xdi_adapter.Address = a->resources.pci.addr[0];
71 a->xdi_adapter.Control = a->resources.pci.addr[2];
72 a->xdi_adapter.Config = a->resources.pci.addr[4];
73
74 a->xdi_adapter.ram = a->resources.pci.addr[0];
75 a->xdi_adapter.ram += MP_SHARED_RAM_OFFSET;
76
77 a->xdi_adapter.reset = a->resources.pci.addr[2];
78 a->xdi_adapter.reset += MP_RESET;
79
80 a->xdi_adapter.cfg = a->resources.pci.addr[4];
81 a->xdi_adapter.cfg += MP_IRQ_RESET;
82
83 a->xdi_adapter.sdram_bar = a->resources.pci.bar[0];
84
85 a->xdi_adapter.prom = a->resources.pci.addr[3];
86 }
87
88 /*
89 ** BAR0 - SDRAM, MP_MEMORY_SIZE, MP2_MEMORY_SIZE by Rev.2
90 ** BAR1 - DEVICES, 0x1000
91 ** BAR2 - CONTROL (REG), 0x2000
92 ** BAR3 - FLASH (REG), 0x8000
93 ** BAR4 - CONFIG (CFG), 0x1000
94 */
95 int diva_pri_init_card(diva_os_xdi_adapter_t * a)
96 {
97 int bar = 0;
98 int pri_rev_2;
99 unsigned long bar_length[5] = {
100 MP_MEMORY_SIZE,
101 0x1000,
102 0x2000,
103 0x8000,
104 0x1000
105 };
106
107 pri_rev_2 = pri_is_rev_2_card(a->CardOrdinal);
108
109 if (pri_rev_2) {
110 bar_length[0] = MP2_MEMORY_SIZE;
111 }
112 /*
113 Set properties
114 */
115 a->xdi_adapter.Properties = CardProperties[a->CardOrdinal];
116 DBG_LOG(("Load %s", a->xdi_adapter.Properties.Name))
117
118 /*
119 First initialization step: get and check hardware resoures.
120 Do not map resources and do not acecess card at this step
121 */
122 for (bar = 0; bar < 5; bar++) {
123 a->resources.pci.bar[bar] =
124 divasa_get_pci_bar(a->resources.pci.bus,
125 a->resources.pci.func, bar,
126 a->resources.pci.hdev);
127 if (!a->resources.pci.bar[bar]
128 || (a->resources.pci.bar[bar] == 0xFFFFFFF0)) {
129 DBG_ERR(("A: invalid bar[%d]=%08x", bar,
130 a->resources.pci.bar[bar]))
131 return (-1);
132 }
133 }
134 a->resources.pci.irq =
135 (byte) divasa_get_pci_irq(a->resources.pci.bus,
136 a->resources.pci.func,
137 a->resources.pci.hdev);
138 if (!a->resources.pci.irq) {
139 DBG_ERR(("A: invalid irq"));
140 return (-1);
141 }
142
143 /*
144 Map all BAR's
145 */
146 for (bar = 0; bar < 5; bar++) {
147 a->resources.pci.addr[bar] =
148 divasa_remap_pci_bar(a, bar, a->resources.pci.bar[bar],
149 bar_length[bar]);
150 if (!a->resources.pci.addr[bar]) {
151 DBG_ERR(("A: A(%d), can't map bar[%d]",
152 a->controller, bar))
153 diva_pri_cleanup_adapter(a);
154 return (-1);
155 }
156 }
157
158 /*
159 Set all memory areas
160 */
161 diva_pri_set_addresses(a);
162
163 /*
164 Get Serial Number of this adapter
165 */
166 if (pri_get_serial_number(a)) {
167 dword serNo;
168 serNo = a->resources.pci.bar[1] & 0xffff0000;
169 serNo |= ((dword) a->resources.pci.bus) << 8;
170 serNo += (a->resources.pci.func + a->controller + 1);
171 a->xdi_adapter.serialNo = serNo & ~0xFF000000;
172 DBG_ERR(("A: A(%d) can't get Serial Number, generated serNo=%ld",
173 a->controller, a->xdi_adapter.serialNo))
174 }
175
176
177 /*
178 Initialize os objects
179 */
180 if (diva_os_initialize_spin_lock(&a->xdi_adapter.isr_spin_lock, "isr")) {
181 diva_pri_cleanup_adapter(a);
182 return (-1);
183 }
184 if (diva_os_initialize_spin_lock
185 (&a->xdi_adapter.data_spin_lock, "data")) {
186 diva_pri_cleanup_adapter(a);
187 return (-1);
188 }
189
190 strcpy(a->xdi_adapter.req_soft_isr.dpc_thread_name, "kdivasprid");
191
192 if (diva_os_initialize_soft_isr(&a->xdi_adapter.req_soft_isr,
193 DIDpcRoutine, &a->xdi_adapter)) {
194 diva_pri_cleanup_adapter(a);
195 return (-1);
196 }
197
198 /*
199 Do not initialize second DPC - only one thread will be created
200 */
201 a->xdi_adapter.isr_soft_isr.object =
202 a->xdi_adapter.req_soft_isr.object;
203
204 /*
205 Next step of card initialization:
206 set up all interface pointers
207 */
208 a->xdi_adapter.Channels = CardProperties[a->CardOrdinal].Channels;
209 a->xdi_adapter.e_max = CardProperties[a->CardOrdinal].E_info;
210
211 a->xdi_adapter.e_tbl =
212 diva_os_malloc(0, a->xdi_adapter.e_max * sizeof(E_INFO));
213 if (!a->xdi_adapter.e_tbl) {
214 diva_pri_cleanup_adapter(a);
215 return (-1);
216 }
217 memset(a->xdi_adapter.e_tbl, 0x00, a->xdi_adapter.e_max * sizeof(E_INFO));
218
219 a->xdi_adapter.a.io = &a->xdi_adapter;
220 a->xdi_adapter.DIRequest = request;
221 a->interface.cleanup_adapter_proc = diva_pri_cleanup_adapter;
222 a->interface.cmd_proc = diva_pri_cmd_card_proc;
223
224 if (pri_rev_2) {
225 prepare_pri2_functions(&a->xdi_adapter);
226 } else {
227 prepare_pri_functions(&a->xdi_adapter);
228 }
229
230 a->dsp_mask = diva_pri_detect_dsps(a);
231
232 /*
233 Allocate DMA map
234 */
235 if (pri_rev_2) {
236 diva_init_dma_map(a->resources.pci.hdev,
237 (struct _diva_dma_map_entry **) &a->xdi_adapter.dma_map, 32);
238 }
239
240 /*
241 Set IRQ handler
242 */
243 a->xdi_adapter.irq_info.irq_nr = a->resources.pci.irq;
244 sprintf(a->xdi_adapter.irq_info.irq_name,
245 "DIVA PRI %ld", (long) a->xdi_adapter.serialNo);
246
247 if (diva_os_register_irq(a, a->xdi_adapter.irq_info.irq_nr,
248 a->xdi_adapter.irq_info.irq_name)) {
249 diva_pri_cleanup_adapter(a);
250 return (-1);
251 }
252 a->xdi_adapter.irq_info.registered = 1;
253
254 diva_log_info("%s IRQ:%d SerNo:%d", a->xdi_adapter.Properties.Name,
255 a->resources.pci.irq, a->xdi_adapter.serialNo);
256
257 return (0);
258 }
259
260 static int diva_pri_cleanup_adapter(diva_os_xdi_adapter_t * a)
261 {
262 int bar = 0;
263
264 /*
265 Stop Adapter if adapter is running
266 */
267 if (a->xdi_adapter.Initialized) {
268 diva_pri_stop_adapter(a);
269 }
270
271 /*
272 Remove ISR Handler
273 */
274 if (a->xdi_adapter.irq_info.registered) {
275 diva_os_remove_irq(a, a->xdi_adapter.irq_info.irq_nr);
276 }
277 a->xdi_adapter.irq_info.registered = 0;
278
279 /*
280 Step 1: unmap all BAR's, if any was mapped
281 */
282 for (bar = 0; bar < 5; bar++) {
283 if (a->resources.pci.bar[bar]
284 && a->resources.pci.addr[bar]) {
285 divasa_unmap_pci_bar(a->resources.pci.addr[bar]);
286 a->resources.pci.bar[bar] = 0;
287 a->resources.pci.addr[bar] = NULL;
288 }
289 }
290
291 /*
292 Free OS objects
293 */
294 diva_os_cancel_soft_isr(&a->xdi_adapter.isr_soft_isr);
295 diva_os_cancel_soft_isr(&a->xdi_adapter.req_soft_isr);
296
297 diva_os_remove_soft_isr(&a->xdi_adapter.req_soft_isr);
298 a->xdi_adapter.isr_soft_isr.object = NULL;
299
300 diva_os_destroy_spin_lock(&a->xdi_adapter.isr_spin_lock, "rm");
301 diva_os_destroy_spin_lock(&a->xdi_adapter.data_spin_lock, "rm");
302
303 /*
304 Free memory accupied by XDI adapter
305 */
306 if (a->xdi_adapter.e_tbl) {
307 diva_os_free(0, a->xdi_adapter.e_tbl);
308 a->xdi_adapter.e_tbl = NULL;
309 }
310 a->xdi_adapter.Channels = 0;
311 a->xdi_adapter.e_max = 0;
312
313
314 /*
315 Free adapter DMA map
316 */
317 diva_free_dma_map(a->resources.pci.hdev,
318 (struct _diva_dma_map_entry *) a->xdi_adapter.
319 dma_map);
320 a->xdi_adapter.dma_map = NULL;
321
322
323 /*
324 Detach this adapter from debug driver
325 */
326
327 return (0);
328 }
329
330 /*
331 ** Activate On Board Boot Loader
332 */
333 static int diva_pri_reset_adapter(PISDN_ADAPTER IoAdapter)
334 {
335 dword i;
336 struct mp_load __iomem *boot;
337
338 if (!IoAdapter->Address || !IoAdapter->reset) {
339 return (-1);
340 }
341 if (IoAdapter->Initialized) {
342 DBG_ERR(("A: A(%d) can't reset PRI adapter - please stop first",
343 IoAdapter->ANum))
344 return (-1);
345 }
346
347 boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
348 WRITE_DWORD(&boot->err, 0);
349 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
350
351 IoAdapter->rstFnc(IoAdapter);
352
353 diva_os_wait(10);
354
355 boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
356 i = READ_DWORD(&boot->live);
357
358 diva_os_wait(10);
359 if (i == READ_DWORD(&boot->live)) {
360 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
361 DBG_ERR(("A: A(%d) CPU on PRI %ld is not alive!",
362 IoAdapter->ANum, IoAdapter->serialNo))
363 return (-1);
364 }
365 if (READ_DWORD(&boot->err)) {
366 DBG_ERR(("A: A(%d) PRI %ld Board Selftest failed, error=%08lx",
367 IoAdapter->ANum, IoAdapter->serialNo,
368 READ_DWORD(&boot->err)))
369 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
370 return (-1);
371 }
372 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
373
374 /*
375 Forget all outstanding entities
376 */
377 IoAdapter->e_count = 0;
378 if (IoAdapter->e_tbl) {
379 memset(IoAdapter->e_tbl, 0x00,
380 IoAdapter->e_max * sizeof(E_INFO));
381 }
382 IoAdapter->head = 0;
383 IoAdapter->tail = 0;
384 IoAdapter->assign = 0;
385 IoAdapter->trapped = 0;
386
387 memset(&IoAdapter->a.IdTable[0], 0x00,
388 sizeof(IoAdapter->a.IdTable));
389 memset(&IoAdapter->a.IdTypeTable[0], 0x00,
390 sizeof(IoAdapter->a.IdTypeTable));
391 memset(&IoAdapter->a.FlowControlIdTable[0], 0x00,
392 sizeof(IoAdapter->a.FlowControlIdTable));
393 memset(&IoAdapter->a.FlowControlSkipTable[0], 0x00,
394 sizeof(IoAdapter->a.FlowControlSkipTable));
395 memset(&IoAdapter->a.misc_flags_table[0], 0x00,
396 sizeof(IoAdapter->a.misc_flags_table));
397 memset(&IoAdapter->a.rx_stream[0], 0x00,
398 sizeof(IoAdapter->a.rx_stream));
399 memset(&IoAdapter->a.tx_stream[0], 0x00,
400 sizeof(IoAdapter->a.tx_stream));
401 memset(&IoAdapter->a.tx_pos[0], 0x00, sizeof(IoAdapter->a.tx_pos));
402 memset(&IoAdapter->a.rx_pos[0], 0x00, sizeof(IoAdapter->a.rx_pos));
403
404 return (0);
405 }
406
407 static int
408 diva_pri_write_sdram_block(PISDN_ADAPTER IoAdapter,
409 dword address,
410 const byte * data, dword length, dword limit)
411 {
412 byte __iomem *p = DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
413 byte __iomem *mem = p;
414
415 if (((address + length) >= limit) || !mem) {
416 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, p);
417 DBG_ERR(("A: A(%d) write PRI address=0x%08lx",
418 IoAdapter->ANum, address + length))
419 return (-1);
420 }
421 mem += address;
422
423 /* memcpy_toio(), maybe? */
424 while (length--) {
425 WRITE_BYTE(mem++, *data++);
426 }
427
428 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, p);
429 return (0);
430 }
431
432 static int
433 diva_pri_start_adapter(PISDN_ADAPTER IoAdapter,
434 dword start_address, dword features)
435 {
436 dword i;
437 int started = 0;
438 byte __iomem *p;
439 struct mp_load __iomem *boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
440 ADAPTER *a = &IoAdapter->a;
441
442 if (IoAdapter->Initialized) {
443 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
444 DBG_ERR(("A: A(%d) pri_start_adapter, adapter already running",
445 IoAdapter->ANum))
446 return (-1);
447 }
448 if (!boot) {
449 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
450 DBG_ERR(("A: PRI %ld can't start, adapter not mapped",
451 IoAdapter->serialNo))
452 return (-1);
453 }
454
455 sprintf(IoAdapter->Name, "A(%d)", (int) IoAdapter->ANum);
456 DBG_LOG(("A(%d) start PRI at 0x%08lx", IoAdapter->ANum,
457 start_address))
458
459 WRITE_DWORD(&boot->addr, start_address);
460 WRITE_DWORD(&boot->cmd, 3);
461
462 for (i = 0; i < 300; ++i) {
463 diva_os_wait(10);
464 if ((READ_DWORD(&boot->signature) >> 16) == 0x4447) {
465 DBG_LOG(("A(%d) Protocol startup time %d.%02d seconds",
466 IoAdapter->ANum, (i / 100), (i % 100)))
467 started = 1;
468 break;
469 }
470 }
471
472 if (!started) {
473 byte __iomem *p = (byte __iomem *)boot;
474 dword TrapId;
475 dword debug;
476 TrapId = READ_DWORD(&p[0x80]);
477 debug = READ_DWORD(&p[0x1c]);
478 DBG_ERR(("A(%d) Adapter start failed 0x%08lx, TrapId=%08lx, debug=%08lx",
479 IoAdapter->ANum, READ_DWORD(&boot->signature),
480 TrapId, debug))
481 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
482 if (IoAdapter->trapFnc) {
483 (*(IoAdapter->trapFnc)) (IoAdapter);
484 }
485 IoAdapter->stop(IoAdapter);
486 return (-1);
487 }
488 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
489
490 IoAdapter->Initialized = true;
491
492 /*
493 Check Interrupt
494 */
495 IoAdapter->IrqCount = 0;
496 p = DIVA_OS_MEM_ATTACH_CFG(IoAdapter);
497 WRITE_DWORD(p, (dword) ~ 0x03E00000);
498 DIVA_OS_MEM_DETACH_CFG(IoAdapter, p);
499 a->ReadyInt = 1;
500 a->ram_out(a, &PR_RAM->ReadyInt, 1);
501
502 for (i = 100; !IoAdapter->IrqCount && (i-- > 0); diva_os_wait(10));
503
504 if (!IoAdapter->IrqCount) {
505 DBG_ERR(("A: A(%d) interrupt test failed",
506 IoAdapter->ANum))
507 IoAdapter->Initialized = false;
508 IoAdapter->stop(IoAdapter);
509 return (-1);
510 }
511
512 IoAdapter->Properties.Features = (word) features;
513
514 diva_xdi_display_adapter_features(IoAdapter->ANum);
515
516 DBG_LOG(("A(%d) PRI adapter successfully started", IoAdapter->ANum))
517 /*
518 Register with DIDD
519 */
520 diva_xdi_didd_register_adapter(IoAdapter->ANum);
521
522 return (0);
523 }
524
525 static void diva_pri_clear_interrupts(diva_os_xdi_adapter_t * a)
526 {
527 PISDN_ADAPTER IoAdapter = &a->xdi_adapter;
528
529 /*
530 clear any pending interrupt
531 */
532 IoAdapter->disIrq(IoAdapter);
533
534 IoAdapter->tst_irq(&IoAdapter->a);
535 IoAdapter->clr_irq(&IoAdapter->a);
536 IoAdapter->tst_irq(&IoAdapter->a);
537
538 /*
539 kill pending dpcs
540 */
541 diva_os_cancel_soft_isr(&IoAdapter->req_soft_isr);
542 diva_os_cancel_soft_isr(&IoAdapter->isr_soft_isr);
543 }
544
545 /*
546 ** Stop Adapter, but do not unmap/unregister - adapter
547 ** will be restarted later
548 */
549 static int diva_pri_stop_adapter(diva_os_xdi_adapter_t * a)
550 {
551 PISDN_ADAPTER IoAdapter = &a->xdi_adapter;
552 int i = 100;
553
554 if (!IoAdapter->ram) {
555 return (-1);
556 }
557 if (!IoAdapter->Initialized) {
558 DBG_ERR(("A: A(%d) can't stop PRI adapter - not running",
559 IoAdapter->ANum))
560 return (-1); /* nothing to stop */
561 }
562 IoAdapter->Initialized = 0;
563
564 /*
565 Disconnect Adapter from DIDD
566 */
567 diva_xdi_didd_remove_adapter(IoAdapter->ANum);
568
569 /*
570 Stop interrupts
571 */
572 a->clear_interrupts_proc = diva_pri_clear_interrupts;
573 IoAdapter->a.ReadyInt = 1;
574 IoAdapter->a.ram_inc(&IoAdapter->a, &PR_RAM->ReadyInt);
575 do {
576 diva_os_sleep(10);
577 } while (i-- && a->clear_interrupts_proc);
578
579 if (a->clear_interrupts_proc) {
580 diva_pri_clear_interrupts(a);
581 a->clear_interrupts_proc = NULL;
582 DBG_ERR(("A: A(%d) no final interrupt from PRI adapter",
583 IoAdapter->ANum))
584 }
585 IoAdapter->a.ReadyInt = 0;
586
587 /*
588 Stop and reset adapter
589 */
590 IoAdapter->stop(IoAdapter);
591
592 return (0);
593 }
594
595 /*
596 ** Process commands form configuration/download framework and from
597 ** user mode
598 **
599 ** return 0 on success
600 */
601 static int
602 diva_pri_cmd_card_proc(struct _diva_os_xdi_adapter *a,
603 diva_xdi_um_cfg_cmd_t * cmd, int length)
604 {
605 int ret = -1;
606
607 if (cmd->adapter != a->controller) {
608 DBG_ERR(("A: pri_cmd, invalid controller=%d != %d",
609 cmd->adapter, a->controller))
610 return (-1);
611 }
612
613 switch (cmd->command) {
614 case DIVA_XDI_UM_CMD_GET_CARD_ORDINAL:
615 a->xdi_mbox.data_length = sizeof(dword);
616 a->xdi_mbox.data =
617 diva_os_malloc(0, a->xdi_mbox.data_length);
618 if (a->xdi_mbox.data) {
619 *(dword *) a->xdi_mbox.data =
620 (dword) a->CardOrdinal;
621 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
622 ret = 0;
623 }
624 break;
625
626 case DIVA_XDI_UM_CMD_GET_SERIAL_NR:
627 a->xdi_mbox.data_length = sizeof(dword);
628 a->xdi_mbox.data =
629 diva_os_malloc(0, a->xdi_mbox.data_length);
630 if (a->xdi_mbox.data) {
631 *(dword *) a->xdi_mbox.data =
632 (dword) a->xdi_adapter.serialNo;
633 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
634 ret = 0;
635 }
636 break;
637
638 case DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG:
639 a->xdi_mbox.data_length = sizeof(dword) * 9;
640 a->xdi_mbox.data =
641 diva_os_malloc(0, a->xdi_mbox.data_length);
642 if (a->xdi_mbox.data) {
643 int i;
644 dword *data = (dword *) a->xdi_mbox.data;
645
646 for (i = 0; i < 8; i++) {
647 *data++ = a->resources.pci.bar[i];
648 }
649 *data++ = (dword) a->resources.pci.irq;
650 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
651 ret = 0;
652 }
653 break;
654
655 case DIVA_XDI_UM_CMD_RESET_ADAPTER:
656 ret = diva_pri_reset_adapter(&a->xdi_adapter);
657 break;
658
659 case DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK:
660 ret = diva_pri_write_sdram_block(&a->xdi_adapter,
661 cmd->command_data.
662 write_sdram.offset,
663 (byte *) & cmd[1],
664 cmd->command_data.
665 write_sdram.length,
666 pri_is_rev_2_card(a->
667 CardOrdinal)
668 ? MP2_MEMORY_SIZE :
669 MP_MEMORY_SIZE);
670 break;
671
672 case DIVA_XDI_UM_CMD_STOP_ADAPTER:
673 ret = diva_pri_stop_adapter(a);
674 break;
675
676 case DIVA_XDI_UM_CMD_START_ADAPTER:
677 ret = diva_pri_start_adapter(&a->xdi_adapter,
678 cmd->command_data.start.
679 offset,
680 cmd->command_data.start.
681 features);
682 break;
683
684 case DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES:
685 a->xdi_adapter.features =
686 cmd->command_data.features.features;
687 a->xdi_adapter.a.protocol_capabilities =
688 a->xdi_adapter.features;
689 DBG_TRC(("Set raw protocol features (%08x)",
690 a->xdi_adapter.features))
691 ret = 0;
692 break;
693
694 case DIVA_XDI_UM_CMD_GET_CARD_STATE:
695 a->xdi_mbox.data_length = sizeof(dword);
696 a->xdi_mbox.data =
697 diva_os_malloc(0, a->xdi_mbox.data_length);
698 if (a->xdi_mbox.data) {
699 dword *data = (dword *) a->xdi_mbox.data;
700 if (!a->xdi_adapter.ram ||
701 !a->xdi_adapter.reset ||
702 !a->xdi_adapter.cfg) {
703 *data = 3;
704 } else if (a->xdi_adapter.trapped) {
705 *data = 2;
706 } else if (a->xdi_adapter.Initialized) {
707 *data = 1;
708 } else {
709 *data = 0;
710 }
711 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
712 ret = 0;
713 }
714 break;
715
716 case DIVA_XDI_UM_CMD_READ_XLOG_ENTRY:
717 ret = diva_card_read_xlog(a);
718 break;
719
720 case DIVA_XDI_UM_CMD_READ_SDRAM:
721 if (a->xdi_adapter.Address) {
722 if (
723 (a->xdi_mbox.data_length =
724 cmd->command_data.read_sdram.length)) {
725 if (
726 (a->xdi_mbox.data_length +
727 cmd->command_data.read_sdram.offset) <
728 a->xdi_adapter.MemorySize) {
729 a->xdi_mbox.data =
730 diva_os_malloc(0,
731 a->xdi_mbox.
732 data_length);
733 if (a->xdi_mbox.data) {
734 byte __iomem *p = DIVA_OS_MEM_ATTACH_ADDRESS(&a->xdi_adapter);
735 byte __iomem *src = p;
736 byte *dst = a->xdi_mbox.data;
737 dword len = a->xdi_mbox.data_length;
738
739 src += cmd->command_data.read_sdram.offset;
740
741 while (len--) {
742 *dst++ = READ_BYTE(src++);
743 }
744 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
745 DIVA_OS_MEM_DETACH_ADDRESS(&a->xdi_adapter, p);
746 ret = 0;
747 }
748 }
749 }
750 }
751 break;
752
753 default:
754 DBG_ERR(("A: A(%d) invalid cmd=%d", a->controller,
755 cmd->command))
756 }
757
758 return (ret);
759 }
760
761 /*
762 ** Get Serial Number
763 */
764 static int pri_get_serial_number(diva_os_xdi_adapter_t * a)
765 {
766 byte data[64];
767 int i;
768 dword len = sizeof(data);
769 volatile byte __iomem *config;
770 volatile byte __iomem *flash;
771 byte c;
772
773 /*
774 * First set some GT6401x config registers before accessing the BOOT-ROM
775 */
776 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
777 c = READ_BYTE(&config[0xc3c]);
778 if (!(c & 0x08)) {
779 WRITE_BYTE(&config[0xc3c], c); /* Base Address enable register */
780 }
781 WRITE_BYTE(&config[LOW_BOOTCS_DREG], 0x00);
782 WRITE_BYTE(&config[HI_BOOTCS_DREG], 0xFF);
783 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
784 /*
785 * Read only the last 64 bytes of manufacturing data
786 */
787 memset(data, '\0', len);
788 flash = DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter);
789 for (i = 0; i < len; i++) {
790 data[i] = READ_BYTE(&flash[0x8000 - len + i]);
791 }
792 DIVA_OS_MEM_DETACH_PROM(&a->xdi_adapter, flash);
793
794 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
795 WRITE_BYTE(&config[LOW_BOOTCS_DREG], 0xFC); /* Disable FLASH EPROM access */
796 WRITE_BYTE(&config[HI_BOOTCS_DREG], 0xFF);
797 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
798
799 if (memcmp(&data[48], "DIVAserverPR", 12)) {
800 #if !defined(DIVA_PRI_NO_PCI_BIOS_WORKAROUND) /* { */
801 word cmd = 0, cmd_org;
802 void *addr;
803 dword addr1, addr3, addr4;
804 byte Bus, Slot;
805 void *hdev;
806 addr4 = a->resources.pci.bar[4];
807 addr3 = a->resources.pci.bar[3]; /* flash */
808 addr1 = a->resources.pci.bar[1]; /* unused */
809
810 DBG_ERR(("A: apply Compaq BIOS workaround"))
811 DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
812 data[0], data[1], data[2], data[3],
813 data[4], data[5], data[6], data[7]))
814
815 Bus = a->resources.pci.bus;
816 Slot = a->resources.pci.func;
817 hdev = a->resources.pci.hdev;
818 PCIread(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev);
819 PCIwrite(Bus, Slot, 0x04, &cmd, sizeof(cmd), hdev);
820
821 PCIwrite(Bus, Slot, 0x14, &addr4, sizeof(addr4), hdev);
822 PCIwrite(Bus, Slot, 0x20, &addr1, sizeof(addr1), hdev);
823
824 PCIwrite(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev);
825
826 addr = a->resources.pci.addr[1];
827 a->resources.pci.addr[1] = a->resources.pci.addr[4];
828 a->resources.pci.addr[4] = addr;
829
830 addr1 = a->resources.pci.bar[1];
831 a->resources.pci.bar[1] = a->resources.pci.bar[4];
832 a->resources.pci.bar[4] = addr1;
833
834 /*
835 Try to read Flash again
836 */
837 len = sizeof(data);
838
839 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
840 if (!(config[0xc3c] & 0x08)) {
841 config[0xc3c] |= 0x08; /* Base Address enable register */
842 }
843 config[LOW_BOOTCS_DREG] = 0x00;
844 config[HI_BOOTCS_DREG] = 0xFF;
845 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
846
847 memset(data, '\0', len);
848 flash = DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter);
849 for (i = 0; i < len; i++) {
850 data[i] = flash[0x8000 - len + i];
851 }
852 DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter, flash);
853 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
854 config[LOW_BOOTCS_DREG] = 0xFC;
855 config[HI_BOOTCS_DREG] = 0xFF;
856 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
857
858 if (memcmp(&data[48], "DIVAserverPR", 12)) {
859 DBG_ERR(("A: failed to read serial number"))
860 DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
861 data[0], data[1], data[2], data[3],
862 data[4], data[5], data[6], data[7]))
863 return (-1);
864 }
865 #else /* } { */
866 DBG_ERR(("A: failed to read DIVA signature word"))
867 DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
868 data[0], data[1], data[2], data[3],
869 data[4], data[5], data[6], data[7]))
870 DBG_LOG(("%02x:%02x:%02x:%02x", data[47], data[46],
871 data[45], data[44]))
872 #endif /* } */
873 }
874
875 a->xdi_adapter.serialNo =
876 (data[47] << 24) | (data[46] << 16) | (data[45] << 8) |
877 data[44];
878 if (!a->xdi_adapter.serialNo
879 || (a->xdi_adapter.serialNo == 0xffffffff)) {
880 a->xdi_adapter.serialNo = 0;
881 DBG_ERR(("A: failed to read serial number"))
882 return (-1);
883 }
884
885 DBG_LOG(("Serial No. : %ld", a->xdi_adapter.serialNo))
886 DBG_TRC(("Board Revision : %d.%02d", (int) data[41],
887 (int) data[40]))
888 DBG_TRC(("PLD revision : %d.%02d", (int) data[33],
889 (int) data[32]))
890 DBG_TRC(("Boot loader version : %d.%02d", (int) data[37],
891 (int) data[36]))
892
893 DBG_TRC(("Manufacturing Date : %d/%02d/%02d (yyyy/mm/dd)",
894 (int) ((data[28] > 90) ? 1900 : 2000) +
895 (int) data[28], (int) data[29], (int) data[30]))
896
897 return (0);
898 }
899
900 void diva_os_prepare_pri2_functions(PISDN_ADAPTER IoAdapter)
901 {
902 }
903
904 void diva_os_prepare_pri_functions(PISDN_ADAPTER IoAdapter)
905 {
906 }
907
908 /*
909 ** Checks presence of DSP on board
910 */
911 static int
912 dsp_check_presence(volatile byte __iomem * addr, volatile byte __iomem * data, int dsp)
913 {
914 word pattern;
915
916 WRITE_WORD(addr, 0x4000);
917 WRITE_WORD(data, DSP_SIGNATURE_PROBE_WORD);
918
919 WRITE_WORD(addr, 0x4000);
920 pattern = READ_WORD(data);
921
922 if (pattern != DSP_SIGNATURE_PROBE_WORD) {
923 DBG_TRC(("W: DSP[%d] %04x(is) != %04x(should)",
924 dsp, pattern, DSP_SIGNATURE_PROBE_WORD))
925 return (-1);
926 }
927
928 WRITE_WORD(addr, 0x4000);
929 WRITE_WORD(data, ~DSP_SIGNATURE_PROBE_WORD);
930
931 WRITE_WORD(addr, 0x4000);
932 pattern = READ_WORD(data);
933
934 if (pattern != (word) ~ DSP_SIGNATURE_PROBE_WORD) {
935 DBG_ERR(("A: DSP[%d] %04x(is) != %04x(should)",
936 dsp, pattern, (word) ~ DSP_SIGNATURE_PROBE_WORD))
937 return (-2);
938 }
939
940 DBG_TRC(("DSP[%d] present", dsp))
941
942 return (0);
943 }
944
945
946 /*
947 ** Check if DSP's are present and operating
948 ** Information about detected DSP's is returned as bit mask
949 ** Bit 0 - DSP1
950 ** ...
951 ** ...
952 ** ...
953 ** Bit 29 - DSP30
954 */
955 static dword diva_pri_detect_dsps(diva_os_xdi_adapter_t * a)
956 {
957 byte __iomem *base;
958 byte __iomem *p;
959 dword ret = 0;
960 dword row_offset[7] = {
961 0x00000000,
962 0x00000800, /* 1 - ROW 1 */
963 0x00000840, /* 2 - ROW 2 */
964 0x00001000, /* 3 - ROW 3 */
965 0x00001040, /* 4 - ROW 4 */
966 0x00000000 /* 5 - ROW 0 */
967 };
968
969 byte __iomem *dsp_addr_port;
970 byte __iomem *dsp_data_port;
971 byte row_state;
972 int dsp_row = 0, dsp_index, dsp_num;
973
974 if (!a->xdi_adapter.Control || !a->xdi_adapter.reset) {
975 return (0);
976 }
977
978 p = DIVA_OS_MEM_ATTACH_RESET(&a->xdi_adapter);
979 WRITE_BYTE(p, _MP_RISC_RESET | _MP_DSP_RESET);
980 DIVA_OS_MEM_DETACH_RESET(&a->xdi_adapter, p);
981 diva_os_wait(5);
982
983 base = DIVA_OS_MEM_ATTACH_CONTROL(&a->xdi_adapter);
984
985 for (dsp_num = 0; dsp_num < 30; dsp_num++) {
986 dsp_row = dsp_num / 7 + 1;
987 dsp_index = dsp_num % 7;
988
989 dsp_data_port = base;
990 dsp_addr_port = base;
991
992 dsp_data_port += row_offset[dsp_row];
993 dsp_addr_port += row_offset[dsp_row];
994
995 dsp_data_port += (dsp_index * 8);
996 dsp_addr_port += (dsp_index * 8) + 0x80;
997
998 if (!dsp_check_presence
999 (dsp_addr_port, dsp_data_port, dsp_num + 1)) {
1000 ret |= (1 << dsp_num);
1001 }
1002 }
1003 DIVA_OS_MEM_DETACH_CONTROL(&a->xdi_adapter, base);
1004
1005 p = DIVA_OS_MEM_ATTACH_RESET(&a->xdi_adapter);
1006 WRITE_BYTE(p, _MP_RISC_RESET | _MP_LED1 | _MP_LED2);
1007 DIVA_OS_MEM_DETACH_RESET(&a->xdi_adapter, p);
1008 diva_os_wait(5);
1009
1010 /*
1011 Verify modules
1012 */
1013 for (dsp_row = 0; dsp_row < 4; dsp_row++) {
1014 row_state = ((ret >> (dsp_row * 7)) & 0x7F);
1015 if (row_state && (row_state != 0x7F)) {
1016 for (dsp_index = 0; dsp_index < 7; dsp_index++) {
1017 if (!(row_state & (1 << dsp_index))) {
1018 DBG_ERR(("A: MODULE[%d]-DSP[%d] failed",
1019 dsp_row + 1,
1020 dsp_index + 1))
1021 }
1022 }
1023 }
1024 }
1025
1026 if (!(ret & 0x10000000)) {
1027 DBG_ERR(("A: ON BOARD-DSP[1] failed"))
1028 }
1029 if (!(ret & 0x20000000)) {
1030 DBG_ERR(("A: ON BOARD-DSP[2] failed"))
1031 }
1032
1033 /*
1034 Print module population now
1035 */
1036 DBG_LOG(("+-----------------------+"))
1037 DBG_LOG(("| DSP MODULE POPULATION |"))
1038 DBG_LOG(("+-----------------------+"))
1039 DBG_LOG(("| 1 | 2 | 3 | 4 |"))
1040 DBG_LOG(("+-----------------------+"))
1041 DBG_LOG(("| %s | %s | %s | %s |",
1042 ((ret >> (0 * 7)) & 0x7F) ? "Y" : "N",
1043 ((ret >> (1 * 7)) & 0x7F) ? "Y" : "N",
1044 ((ret >> (2 * 7)) & 0x7F) ? "Y" : "N",
1045 ((ret >> (3 * 7)) & 0x7F) ? "Y" : "N"))
1046 DBG_LOG(("+-----------------------+"))
1047
1048 DBG_LOG(("DSP's(present-absent):%08x-%08x", ret,
1049 ~ret & 0x3fffffff))
1050
1051 return (ret);
1052 }
Verdex Pro support