drivers/net/sfc/boards.c

   1 /****************************************************************************
   2  * Driver for Solarflare Solarstorm network controllers and boards
   3  * Copyright 2007-2008 Solarflare Communications Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License version 2 as published
   7  * by the Free Software Foundation, incorporated herein by reference.
   8  */
   9
  10 #include "net_driver.h"
  11 #include "phy.h"
  12 #include "boards.h"
  13 #include "efx.h"
  14 #include "workarounds.h"
  15
  16 /* Macros for unpacking the board revision */
  17 /* The revision info is in host byte order. */
  18 #define BOARD_TYPE(_rev) (_rev >> 8)
  19 #define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
  20 #define BOARD_MINOR(_rev) (_rev & 0xf)
  21
  22 /* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
  23 #define BLINK_INTERVAL (HZ/2)
  24
  25 static void blink_led_timer(unsigned long context)
  26 {
  27         struct efx_nic *efx = (struct efx_nic *)context;
  28         struct efx_blinker *bl = &efx->board_info.blinker;
  29         efx->board_info.set_id_led(efx, bl->state);
  30         bl->state = !bl->state;
  31         if (bl->resubmit)
  32                 mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
  33 }
  34
  35 static void board_blink(struct efx_nic *efx, bool blink)
  36 {
  37         struct efx_blinker *blinker = &efx->board_info.blinker;
  38
  39         /* The rtnl mutex serialises all ethtool ioctls, so
  40          * nothing special needs doing here. */
  41         if (blink) {
  42                 blinker->resubmit = true;
  43                 blinker->state = false;
  44                 setup_timer(&blinker->timer, blink_led_timer,
  45                             (unsigned long)efx);
  46                 mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
  47         } else {
  48                 blinker->resubmit = false;
  49                 if (blinker->timer.function)
  50                         del_timer_sync(&blinker->timer);
  51                 efx->board_info.init_leds(efx);
  52         }
  53 }
  54
  55 /*****************************************************************************
  56  * Support for LM87 sensor chip used on several boards
  57  */
  58 #define LM87_REG_ALARMS1                0x41
  59 #define LM87_REG_ALARMS2                0x42
  60 #define LM87_IN_LIMITS(nr, _min, _max)                  \
  61         0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
  62 #define LM87_AIN_LIMITS(nr, _min, _max)                 \
  63         0x3B + (nr), _max, 0x1A + (nr), _min
  64 #define LM87_TEMP_INT_LIMITS(_min, _max)                \
  65         0x39, _max, 0x3A, _min
  66 #define LM87_TEMP_EXT1_LIMITS(_min, _max)               \
  67         0x37, _max, 0x38, _min
  68
  69 #define LM87_ALARM_TEMP_INT             0x10
  70 #define LM87_ALARM_TEMP_EXT1            0x20
  71
  72 #if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
  73
  74 static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
  75                          const u8 *reg_values)
  76 {
  77         struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
  78         int rc;
  79
  80         if (!client)
  81                 return -EIO;
  82
  83         while (*reg_values) {
  84                 u8 reg = *reg_values++;
  85                 u8 value = *reg_values++;
  86                 rc = i2c_smbus_write_byte_data(client, reg, value);
  87                 if (rc)
  88                         goto err;
  89         }
  90
  91         efx->board_info.hwmon_client = client;
  92         return 0;
  93
  94 err:
  95         i2c_unregister_device(client);
  96         return rc;
  97 }
  98
  99 static void efx_fini_lm87(struct efx_nic *efx)
 100 {
 101         i2c_unregister_device(efx->board_info.hwmon_client);
 102 }
 103
 104 static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
 105 {
 106         struct i2c_client *client = efx->board_info.hwmon_client;
 107         s32 alarms1, alarms2;
 108
 109         /* If link is up then do not monitor temperature */
 110         if (EFX_WORKAROUND_7884(efx) && efx->link_up)
 111                 return 0;
 112
 113         alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
 114         alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
 115         if (alarms1 < 0)
 116                 return alarms1;
 117         if (alarms2 < 0)
 118                 return alarms2;
 119         alarms1 &= mask;
 120         alarms2 &= mask >> 8;
 121         if (alarms1 || alarms2) {
 122                 EFX_ERR(efx,
 123                         "LM87 detected a hardware failure (status %02x:%02x)"
 124                         "%s%s\n",
 125                         alarms1, alarms2,
 126                         (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
 127                         (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
 128                 return -ERANGE;
 129         }
 130
 131         return 0;
 132 }
 133
 134 #else /* !CONFIG_SENSORS_LM87 */
 135
 136 static inline int
 137 efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
 138               const u8 *reg_values)
 139 {
 140         return 0;
 141 }
 142 static inline void efx_fini_lm87(struct efx_nic *efx)
 143 {
 144 }
 145 static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
 146 {
 147         return 0;
 148 }
 149
 150 #endif /* CONFIG_SENSORS_LM87 */
 151
 152 /*****************************************************************************
 153  * Support for the SFE4002
 154  *
 155  */
 156 static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
 157
 158 static const u8 sfe4002_lm87_regs[] = {
 159         LM87_IN_LIMITS(0, 0x83, 0x91),          /* 2.5V:  1.8V +/- 5% */
 160         LM87_IN_LIMITS(1, 0x51, 0x5a),          /* Vccp1: 1.2V +/- 5% */
 161         LM87_IN_LIMITS(2, 0xb6, 0xca),          /* 3.3V:  3.3V +/- 5% */
 162         LM87_IN_LIMITS(3, 0xb0, 0xc9),          /* 5V:    4.6-5.2V */
 163         LM87_IN_LIMITS(4, 0xb0, 0xe0),          /* 12V:   11-14V */
 164         LM87_IN_LIMITS(5, 0x44, 0x4b),          /* Vccp2: 1.0V +/- 5% */
 165         LM87_AIN_LIMITS(0, 0xa0, 0xb2),         /* AIN1:  1.66V +/- 5% */
 166         LM87_AIN_LIMITS(1, 0x91, 0xa1),         /* AIN2:  1.5V +/- 5% */
 167         LM87_TEMP_INT_LIMITS(10, 60),           /* board */
 168         LM87_TEMP_EXT1_LIMITS(10, 70),          /* Falcon */
 169         0
 170 };
 171
 172 static struct i2c_board_info sfe4002_hwmon_info = {
 173         I2C_BOARD_INFO("lm87", 0x2e),
 174         .platform_data  = &sfe4002_lm87_channel,
 175 };
 176
 177 /****************************************************************************/
 178 /* LED allocations. Note that on rev A0 boards the schematic and the reality
 179  * differ: red and green are swapped. Below is the fixed (A1) layout (there
 180  * are only 3 A0 boards in existence, so no real reason to make this
 181  * conditional).
 182  */
 183 #define SFE4002_FAULT_LED (2)   /* Red */
 184 #define SFE4002_RX_LED    (0)   /* Green */
 185 #define SFE4002_TX_LED    (1)   /* Amber */
 186
 187 static void sfe4002_init_leds(struct efx_nic *efx)
 188 {
 189         /* Set the TX and RX LEDs to reflect status and activity, and the
 190          * fault LED off */
 191         xfp_set_led(efx, SFE4002_TX_LED,
 192                     QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
 193         xfp_set_led(efx, SFE4002_RX_LED,
 194                     QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
 195         xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
 196 }
 197
 198 static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
 199 {
 200         xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
 201                         QUAKE_LED_OFF);
 202 }
 203
 204 static int sfe4002_check_hw(struct efx_nic *efx)
 205 {
 206         /* A0 board rev. 4002s report a temperature fault the whole time
 207          * (bad sensor) so we mask it out. */
 208         unsigned alarm_mask =
 209                 (efx->board_info.major == 0 && efx->board_info.minor == 0) ?
 210                 ~LM87_ALARM_TEMP_EXT1 : ~0;
 211
 212         return efx_check_lm87(efx, alarm_mask);
 213 }
 214
 215 static int sfe4002_init(struct efx_nic *efx)
 216 {
 217         int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
 218         if (rc)
 219                 return rc;
 220         efx->board_info.monitor = sfe4002_check_hw;
 221         efx->board_info.init_leds = sfe4002_init_leds;
 222         efx->board_info.set_id_led = sfe4002_set_id_led;
 223         efx->board_info.blink = board_blink;
 224         efx->board_info.fini = efx_fini_lm87;
 225         return 0;
 226 }
 227
 228 /*****************************************************************************
 229  * Support for the SFN4112F
 230  *
 231  */
 232 static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
 233
 234 static const u8 sfn4112f_lm87_regs[] = {
 235         LM87_IN_LIMITS(0, 0x83, 0x91),          /* 2.5V:  1.8V +/- 5% */
 236         LM87_IN_LIMITS(1, 0x51, 0x5a),          /* Vccp1: 1.2V +/- 5% */
 237         LM87_IN_LIMITS(2, 0xb6, 0xca),          /* 3.3V:  3.3V +/- 5% */
 238         LM87_IN_LIMITS(4, 0xb0, 0xe0),          /* 12V:   11-14V */
 239         LM87_IN_LIMITS(5, 0x44, 0x4b),          /* Vccp2: 1.0V +/- 5% */
 240         LM87_AIN_LIMITS(1, 0x91, 0xa1),         /* AIN2:  1.5V +/- 5% */
 241         LM87_TEMP_INT_LIMITS(10, 60),           /* board */
 242         LM87_TEMP_EXT1_LIMITS(10, 70),          /* Falcon */
 243         0
 244 };
 245
 246 static struct i2c_board_info sfn4112f_hwmon_info = {
 247         I2C_BOARD_INFO("lm87", 0x2e),
 248         .platform_data  = &sfn4112f_lm87_channel,
 249 };
 250
 251 #define SFN4112F_ACT_LED        0
 252 #define SFN4112F_LINK_LED       1
 253
 254 static void sfn4112f_init_leds(struct efx_nic *efx)
 255 {
 256         xfp_set_led(efx, SFN4112F_ACT_LED,
 257                     QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
 258         xfp_set_led(efx, SFN4112F_LINK_LED,
 259                     QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
 260 }
 261
 262 static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
 263 {
 264         xfp_set_led(efx, SFN4112F_LINK_LED,
 265                     state ? QUAKE_LED_ON : QUAKE_LED_OFF);
 266 }
 267
 268 static int sfn4112f_check_hw(struct efx_nic *efx)
 269 {
 270         /* Mask out unused sensors */
 271         return efx_check_lm87(efx, ~0x48);
 272 }
 273
 274 static int sfn4112f_init(struct efx_nic *efx)
 275 {
 276         int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
 277         if (rc)
 278                 return rc;
 279         efx->board_info.monitor = sfn4112f_check_hw;
 280         efx->board_info.init_leds = sfn4112f_init_leds;
 281         efx->board_info.set_id_led = sfn4112f_set_id_led;
 282         efx->board_info.blink = board_blink;
 283         efx->board_info.fini = efx_fini_lm87;
 284         return 0;
 285 }
 286
 287 /* This will get expanded as board-specific details get moved out of the
 288  * PHY drivers. */
 289 struct efx_board_data {
 290         enum efx_board_type type;
 291         const char *ref_model;
 292         const char *gen_type;
 293         int (*init) (struct efx_nic *nic);
 294 };
 295
 296
 297 static struct efx_board_data board_data[] = {
 298         { EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
 299         { EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
 300         { EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
 301           sfn4111t_init },
 302         { EFX_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter",
 303           sfn4112f_init },
 304 };
 305
 306 void efx_set_board_info(struct efx_nic *efx, u16 revision_info)
 307 {
 308         struct efx_board_data *data = NULL;
 309         int i;
 310
 311         efx->board_info.type = BOARD_TYPE(revision_info);
 312         efx->board_info.major = BOARD_MAJOR(revision_info);
 313         efx->board_info.minor = BOARD_MINOR(revision_info);
 314
 315         for (i = 0; i < ARRAY_SIZE(board_data); i++)
 316                 if (board_data[i].type == efx->board_info.type)
 317                         data = &board_data[i];
 318
 319         if (data) {
 320                 EFX_INFO(efx, "board is %s rev %c%d\n",
 321                          (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
 322                          ? data->ref_model : data->gen_type,
 323                          'A' + efx->board_info.major, efx->board_info.minor);
 324                 efx->board_info.init = data->init;
 325         } else {
 326                 EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
 327         }
 328 }