1 /* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c)
3 * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
4 * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
6 * Current maintainers (as of 29 September 2003) are:
7 * Pavel Roskin <proski AT gnu.org>
8 * and David Gibson <hermes AT gibson.dropbear.id.au>
10 * (C) Copyright David Gibson, IBM Corporation 2001-2003.
11 * Copyright (C) 2000 David Gibson, Linuxcare Australia.
12 * With some help from :
13 * Copyright (C) 2001 Jean Tourrilhes, HP Labs
14 * Copyright (C) 2001 Benjamin Herrenschmidt
16 * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
18 * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
19 * AT fasta.fh-dortmund.de>
20 * http://www.stud.fh-dortmund.de/~andy/wvlan/
22 * The contents of this file are subject to the Mozilla Public License
23 * Version 1.1 (the "License"); you may not use this file except in
24 * compliance with the License. You may obtain a copy of the License
25 * at http://www.mozilla.org/MPL/
27 * Software distributed under the License is distributed on an "AS IS"
28 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
29 * the License for the specific language governing rights and
30 * limitations under the License.
32 * The initial developer of the original code is David A. Hinds
33 * <dahinds AT users.sourceforge.net>. Portions created by David
34 * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
37 * Alternatively, the contents of this file may be used under the
38 * terms of the GNU General Public License version 2 (the "GPL"), in
39 * which case the provisions of the GPL are applicable instead of the
40 * above. If you wish to allow the use of your version of this file
41 * only under the terms of the GPL and not to allow others to use your
42 * version of this file under the MPL, indicate your decision by
43 * deleting the provisions above and replace them with the notice and
44 * other provisions required by the GPL. If you do not delete the
45 * provisions above, a recipient may use your version of this file
46 * under either the MPL or the GPL. */
50 * o Handle de-encapsulation within network layer, provide 802.11
51 * headers (patch from Thomas 'Dent' Mirlacher)
52 * o Fix possible races in SPY handling.
53 * o Disconnect wireless extensions from fundamental configuration.
54 * o (maybe) Software WEP support (patch from Stano Meduna).
55 * o (maybe) Use multiple Tx buffers - driver handling queue
56 * rather than firmware.
59 /* Locking and synchronization:
61 * The basic principle is that everything is serialized through a
62 * single spinlock, priv->lock. The lock is used in user, bh and irq
63 * context, so when taken outside hardirq context it should always be
64 * taken with interrupts disabled. The lock protects both the
65 * hardware and the struct orinoco_private.
67 * Another flag, priv->hw_unavailable indicates that the hardware is
68 * unavailable for an extended period of time (e.g. suspended, or in
69 * the middle of a hard reset). This flag is protected by the
70 * spinlock. All code which touches the hardware should check the
71 * flag after taking the lock, and if it is set, give up on whatever
72 * they are doing and drop the lock again. The orinoco_lock()
73 * function handles this (it unlocks and returns -EBUSY if
74 * hw_unavailable is non-zero).
77 #define DRIVER_NAME "orinoco"
79 #include <linux/module.h>
80 #include <linux/kernel.h>
81 #include <linux/init.h>
82 #include <linux/delay.h>
83 #include <linux/device.h>
84 #include <linux/netdevice.h>
85 #include <linux/etherdevice.h>
86 #include <linux/ethtool.h>
87 #include <linux/suspend.h>
88 #include <linux/if_arp.h>
89 #include <linux/wireless.h>
90 #include <linux/ieee80211.h>
91 #include <net/iw_handler.h>
92 #include <net/cfg80211.h>
94 #include "hermes_rid.h"
95 #include "hermes_dld.h"
106 /********************************************************************/
107 /* Module information */
108 /********************************************************************/
110 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & "
111 "David Gibson <hermes@gibson.dropbear.id.au>");
112 MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based "
113 "and similar wireless cards");
114 MODULE_LICENSE("Dual MPL/GPL");
116 /* Level of debugging. Used in the macros in orinoco.h */
118 int orinoco_debug
= ORINOCO_DEBUG
;
119 EXPORT_SYMBOL(orinoco_debug
);
120 module_param(orinoco_debug
, int, 0644);
121 MODULE_PARM_DESC(orinoco_debug
, "Debug level");
124 static int suppress_linkstatus
; /* = 0 */
125 module_param(suppress_linkstatus
, bool, 0644);
126 MODULE_PARM_DESC(suppress_linkstatus
, "Don't log link status changes");
128 static int ignore_disconnect
; /* = 0 */
129 module_param(ignore_disconnect
, int, 0644);
130 MODULE_PARM_DESC(ignore_disconnect
,
131 "Don't report lost link to the network layer");
133 int force_monitor
; /* = 0 */
134 module_param(force_monitor
, int, 0644);
135 MODULE_PARM_DESC(force_monitor
, "Allow monitor mode for all firmware versions");
137 /********************************************************************/
138 /* Internal constants */
139 /********************************************************************/
141 /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
142 static const u8 encaps_hdr
[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
143 #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
145 #define ORINOCO_MIN_MTU 256
146 #define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
148 #define MAX_IRQLOOPS_PER_IRQ 10
149 #define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
150 * how many events the
152 * legitimately generate */
154 #define DUMMY_FID 0xFFFF
156 /*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
157 HERMES_MAX_MULTICAST : 0)*/
158 #define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
160 #define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
161 | HERMES_EV_TX | HERMES_EV_TXEXC \
162 | HERMES_EV_WTERR | HERMES_EV_INFO \
165 static const struct ethtool_ops orinoco_ethtool_ops
;
167 /********************************************************************/
169 /********************************************************************/
171 /* Beginning of the Tx descriptor, used in TxExc handling */
172 struct hermes_txexc_data
{
173 struct hermes_tx_descriptor desc
;
177 } __attribute__ ((packed
));
179 /* Rx frame header except compatibility 802.3 header */
180 struct hermes_rx_descriptor
{
201 } __attribute__ ((packed
));
203 struct orinoco_rx_data
{
204 struct hermes_rx_descriptor
*desc
;
206 struct list_head list
;
209 struct orinoco_scan_data
{
213 struct list_head list
;
216 /********************************************************************/
217 /* Function prototypes */
218 /********************************************************************/
220 static int __orinoco_set_multicast_list(struct net_device
*dev
);
221 static int __orinoco_up(struct orinoco_private
*priv
);
222 static int __orinoco_down(struct orinoco_private
*priv
);
223 static int __orinoco_commit(struct orinoco_private
*priv
);
225 /********************************************************************/
226 /* Internal helper functions */
227 /********************************************************************/
229 void set_port_type(struct orinoco_private
*priv
)
231 switch (priv
->iw_mode
) {
232 case NL80211_IFTYPE_STATION
:
234 priv
->createibss
= 0;
236 case NL80211_IFTYPE_ADHOC
:
237 if (priv
->prefer_port3
) {
239 priv
->createibss
= 0;
241 priv
->port_type
= priv
->ibss_port
;
242 priv
->createibss
= 1;
245 case NL80211_IFTYPE_MONITOR
:
247 priv
->createibss
= 0;
250 printk(KERN_ERR
"%s: Invalid priv->iw_mode in set_port_type()\n",
255 /********************************************************************/
257 /********************************************************************/
259 static int orinoco_open(struct net_device
*dev
)
261 struct orinoco_private
*priv
= ndev_priv(dev
);
265 if (orinoco_lock(priv
, &flags
) != 0)
268 err
= __orinoco_up(priv
);
273 orinoco_unlock(priv
, &flags
);
278 static int orinoco_stop(struct net_device
*dev
)
280 struct orinoco_private
*priv
= ndev_priv(dev
);
283 /* We mustn't use orinoco_lock() here, because we need to be
284 able to close the interface even if hw_unavailable is set
285 (e.g. as we're released after a PC Card removal) */
286 spin_lock_irq(&priv
->lock
);
290 err
= __orinoco_down(priv
);
292 spin_unlock_irq(&priv
->lock
);
297 static struct net_device_stats
*orinoco_get_stats(struct net_device
*dev
)
299 struct orinoco_private
*priv
= ndev_priv(dev
);
304 static void orinoco_set_multicast_list(struct net_device
*dev
)
306 struct orinoco_private
*priv
= ndev_priv(dev
);
309 if (orinoco_lock(priv
, &flags
) != 0) {
310 printk(KERN_DEBUG
"%s: orinoco_set_multicast_list() "
311 "called when hw_unavailable\n", dev
->name
);
315 __orinoco_set_multicast_list(dev
);
316 orinoco_unlock(priv
, &flags
);
319 static int orinoco_change_mtu(struct net_device
*dev
, int new_mtu
)
321 struct orinoco_private
*priv
= ndev_priv(dev
);
323 if ((new_mtu
< ORINOCO_MIN_MTU
) || (new_mtu
> ORINOCO_MAX_MTU
))
326 /* MTU + encapsulation + header length */
327 if ((new_mtu
+ ENCAPS_OVERHEAD
+ sizeof(struct ieee80211_hdr
)) >
328 (priv
->nicbuf_size
- ETH_HLEN
))
336 /********************************************************************/
338 /********************************************************************/
340 static netdev_tx_t
orinoco_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
342 struct orinoco_private
*priv
= ndev_priv(dev
);
343 struct net_device_stats
*stats
= &priv
->stats
;
344 struct orinoco_tkip_key
*key
;
345 hermes_t
*hw
= &priv
->hw
;
347 u16 txfid
= priv
->txfid
;
353 if (!netif_running(dev
)) {
354 printk(KERN_ERR
"%s: Tx on stopped device!\n",
356 return NETDEV_TX_BUSY
;
359 if (netif_queue_stopped(dev
)) {
360 printk(KERN_DEBUG
"%s: Tx while transmitter busy!\n",
362 return NETDEV_TX_BUSY
;
365 if (orinoco_lock(priv
, &flags
) != 0) {
366 printk(KERN_ERR
"%s: orinoco_xmit() called while hw_unavailable\n",
368 return NETDEV_TX_BUSY
;
371 if (!netif_carrier_ok(dev
) ||
372 (priv
->iw_mode
== NL80211_IFTYPE_MONITOR
)) {
373 /* Oops, the firmware hasn't established a connection,
374 silently drop the packet (this seems to be the
379 /* Check packet length */
380 if (skb
->len
< ETH_HLEN
)
383 key
= (struct orinoco_tkip_key
*) priv
->keys
[priv
->tx_key
].key
;
385 do_mic
= ((priv
->encode_alg
== ORINOCO_ALG_TKIP
) &&
388 tx_control
= HERMES_TXCTRL_TX_OK
| HERMES_TXCTRL_TX_EX
;
391 tx_control
|= (priv
->tx_key
<< HERMES_MIC_KEY_ID_SHIFT
) |
394 if (priv
->has_alt_txcntl
) {
395 /* WPA enabled firmwares have tx_cntl at the end of
396 * the 802.11 header. So write zeroed descriptor and
397 * 802.11 header at the same time
399 char desc
[HERMES_802_3_OFFSET
];
400 __le16
*txcntl
= (__le16
*) &desc
[HERMES_TXCNTL2_OFFSET
];
402 memset(&desc
, 0, sizeof(desc
));
404 *txcntl
= cpu_to_le16(tx_control
);
405 err
= hermes_bap_pwrite(hw
, USER_BAP
, &desc
, sizeof(desc
),
409 printk(KERN_ERR
"%s: Error %d writing Tx "
410 "descriptor to BAP\n", dev
->name
, err
);
414 struct hermes_tx_descriptor desc
;
416 memset(&desc
, 0, sizeof(desc
));
418 desc
.tx_control
= cpu_to_le16(tx_control
);
419 err
= hermes_bap_pwrite(hw
, USER_BAP
, &desc
, sizeof(desc
),
423 printk(KERN_ERR
"%s: Error %d writing Tx "
424 "descriptor to BAP\n", dev
->name
, err
);
428 /* Clear the 802.11 header and data length fields - some
429 * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
430 * if this isn't done. */
431 hermes_clear_words(hw
, HERMES_DATA0
,
432 HERMES_802_3_OFFSET
- HERMES_802_11_OFFSET
);
435 eh
= (struct ethhdr
*)skb
->data
;
437 /* Encapsulate Ethernet-II frames */
438 if (ntohs(eh
->h_proto
) > ETH_DATA_LEN
) { /* Ethernet-II frame */
439 struct header_struct
{
440 struct ethhdr eth
; /* 802.3 header */
441 u8 encap
[6]; /* 802.2 header */
442 } __attribute__ ((packed
)) hdr
;
444 /* Strip destination and source from the data */
445 skb_pull(skb
, 2 * ETH_ALEN
);
447 /* And move them to a separate header */
448 memcpy(&hdr
.eth
, eh
, 2 * ETH_ALEN
);
449 hdr
.eth
.h_proto
= htons(sizeof(encaps_hdr
) + skb
->len
);
450 memcpy(hdr
.encap
, encaps_hdr
, sizeof(encaps_hdr
));
452 /* Insert the SNAP header */
453 if (skb_headroom(skb
) < sizeof(hdr
)) {
455 "%s: Not enough headroom for 802.2 headers %d\n",
456 dev
->name
, skb_headroom(skb
));
459 eh
= (struct ethhdr
*) skb_push(skb
, sizeof(hdr
));
460 memcpy(eh
, &hdr
, sizeof(hdr
));
463 err
= hermes_bap_pwrite(hw
, USER_BAP
, skb
->data
, skb
->len
,
464 txfid
, HERMES_802_3_OFFSET
);
466 printk(KERN_ERR
"%s: Error %d writing packet to BAP\n",
471 /* Calculate Michael MIC */
473 u8 mic_buf
[MICHAEL_MIC_LEN
+ 1];
479 /* MIC start is on an odd boundary */
480 mic_buf
[0] = skb
->data
[skb
->len
- 1];
482 offset
= skb
->len
- 1;
483 len
= MICHAEL_MIC_LEN
+ 1;
487 len
= MICHAEL_MIC_LEN
;
490 orinoco_mic(priv
->tx_tfm_mic
, key
->tx_mic
,
491 eh
->h_dest
, eh
->h_source
, 0 /* priority */,
492 skb
->data
+ ETH_HLEN
, skb
->len
- ETH_HLEN
, mic
);
495 err
= hermes_bap_pwrite(hw
, USER_BAP
, &mic_buf
[0], len
,
496 txfid
, HERMES_802_3_OFFSET
+ offset
);
498 printk(KERN_ERR
"%s: Error %d writing MIC to BAP\n",
504 /* Finally, we actually initiate the send */
505 netif_stop_queue(dev
);
507 err
= hermes_docmd_wait(hw
, HERMES_CMD_TX
| HERMES_CMD_RECL
,
510 netif_start_queue(dev
);
512 printk(KERN_ERR
"%s: Error %d transmitting packet\n",
517 dev
->trans_start
= jiffies
;
518 stats
->tx_bytes
+= HERMES_802_3_OFFSET
+ skb
->len
;
526 orinoco_unlock(priv
, &flags
);
532 schedule_work(&priv
->reset_work
);
533 orinoco_unlock(priv
, &flags
);
534 return NETDEV_TX_BUSY
;
537 static void __orinoco_ev_alloc(struct net_device
*dev
, hermes_t
*hw
)
539 struct orinoco_private
*priv
= ndev_priv(dev
);
540 u16 fid
= hermes_read_regn(hw
, ALLOCFID
);
542 if (fid
!= priv
->txfid
) {
543 if (fid
!= DUMMY_FID
)
544 printk(KERN_WARNING
"%s: Allocate event on unexpected fid (%04X)\n",
549 hermes_write_regn(hw
, ALLOCFID
, DUMMY_FID
);
552 static void __orinoco_ev_tx(struct net_device
*dev
, hermes_t
*hw
)
554 struct orinoco_private
*priv
= ndev_priv(dev
);
555 struct net_device_stats
*stats
= &priv
->stats
;
559 netif_wake_queue(dev
);
561 hermes_write_regn(hw
, TXCOMPLFID
, DUMMY_FID
);
564 static void __orinoco_ev_txexc(struct net_device
*dev
, hermes_t
*hw
)
566 struct orinoco_private
*priv
= ndev_priv(dev
);
567 struct net_device_stats
*stats
= &priv
->stats
;
568 u16 fid
= hermes_read_regn(hw
, TXCOMPLFID
);
570 struct hermes_txexc_data hdr
;
573 if (fid
== DUMMY_FID
)
574 return; /* Nothing's really happened */
576 /* Read part of the frame header - we need status and addr1 */
577 err
= hermes_bap_pread(hw
, IRQ_BAP
, &hdr
,
578 sizeof(struct hermes_txexc_data
),
581 hermes_write_regn(hw
, TXCOMPLFID
, DUMMY_FID
);
585 printk(KERN_WARNING
"%s: Unable to read descriptor on Tx error "
586 "(FID=%04X error %d)\n",
587 dev
->name
, fid
, err
);
591 DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev
->name
,
594 /* We produce a TXDROP event only for retry or lifetime
595 * exceeded, because that's the only status that really mean
596 * that this particular node went away.
597 * Other errors means that *we* screwed up. - Jean II */
598 status
= le16_to_cpu(hdr
.desc
.status
);
599 if (status
& (HERMES_TXSTAT_RETRYERR
| HERMES_TXSTAT_AGEDERR
)) {
600 union iwreq_data wrqu
;
602 /* Copy 802.11 dest address.
603 * We use the 802.11 header because the frame may
604 * not be 802.3 or may be mangled...
605 * In Ad-Hoc mode, it will be the node address.
606 * In managed mode, it will be most likely the AP addr
607 * User space will figure out how to convert it to
608 * whatever it needs (IP address or else).
610 memcpy(wrqu
.addr
.sa_data
, hdr
.addr1
, ETH_ALEN
);
611 wrqu
.addr
.sa_family
= ARPHRD_ETHER
;
613 /* Send event to user space */
614 wireless_send_event(dev
, IWEVTXDROP
, &wrqu
, NULL
);
617 netif_wake_queue(dev
);
620 static void orinoco_tx_timeout(struct net_device
*dev
)
622 struct orinoco_private
*priv
= ndev_priv(dev
);
623 struct net_device_stats
*stats
= &priv
->stats
;
624 struct hermes
*hw
= &priv
->hw
;
626 printk(KERN_WARNING
"%s: Tx timeout! "
627 "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
628 dev
->name
, hermes_read_regn(hw
, ALLOCFID
),
629 hermes_read_regn(hw
, TXCOMPLFID
), hermes_read_regn(hw
, EVSTAT
));
633 schedule_work(&priv
->reset_work
);
636 /********************************************************************/
637 /* Rx path (data frames) */
638 /********************************************************************/
640 /* Does the frame have a SNAP header indicating it should be
641 * de-encapsulated to Ethernet-II? */
642 static inline int is_ethersnap(void *_hdr
)
646 /* We de-encapsulate all packets which, a) have SNAP headers
647 * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
648 * and where b) the OUI of the SNAP header is 00:00:00 or
649 * 00:00:f8 - we need both because different APs appear to use
650 * different OUIs for some reason */
651 return (memcmp(hdr
, &encaps_hdr
, 5) == 0)
652 && ((hdr
[5] == 0x00) || (hdr
[5] == 0xf8));
655 static inline void orinoco_spy_gather(struct net_device
*dev
, u_char
*mac
,
656 int level
, int noise
)
658 struct iw_quality wstats
;
659 wstats
.level
= level
- 0x95;
660 wstats
.noise
= noise
- 0x95;
661 wstats
.qual
= (level
> noise
) ? (level
- noise
) : 0;
662 wstats
.updated
= IW_QUAL_ALL_UPDATED
| IW_QUAL_DBM
;
663 /* Update spy records */
664 wireless_spy_update(dev
, mac
, &wstats
);
667 static void orinoco_stat_gather(struct net_device
*dev
,
669 struct hermes_rx_descriptor
*desc
)
671 struct orinoco_private
*priv
= ndev_priv(dev
);
673 /* Using spy support with lots of Rx packets, like in an
674 * infrastructure (AP), will really slow down everything, because
675 * the MAC address must be compared to each entry of the spy list.
676 * If the user really asks for it (set some address in the
677 * spy list), we do it, but he will pay the price.
678 * Note that to get here, you need both WIRELESS_SPY
679 * compiled in AND some addresses in the list !!!
681 /* Note : gcc will optimise the whole section away if
682 * WIRELESS_SPY is not defined... - Jean II */
683 if (SPY_NUMBER(priv
)) {
684 orinoco_spy_gather(dev
, skb_mac_header(skb
) + ETH_ALEN
,
685 desc
->signal
, desc
->silence
);
690 * orinoco_rx_monitor - handle received monitor frames.
695 * desc rx descriptor of the frame
697 * Call context: interrupt
699 static void orinoco_rx_monitor(struct net_device
*dev
, u16 rxfid
,
700 struct hermes_rx_descriptor
*desc
)
702 u32 hdrlen
= 30; /* return full header by default */
708 struct orinoco_private
*priv
= ndev_priv(dev
);
709 struct net_device_stats
*stats
= &priv
->stats
;
710 hermes_t
*hw
= &priv
->hw
;
712 len
= le16_to_cpu(desc
->data_len
);
714 /* Determine the size of the header and the data */
715 fc
= le16_to_cpu(desc
->frame_ctl
);
716 switch (fc
& IEEE80211_FCTL_FTYPE
) {
717 case IEEE80211_FTYPE_DATA
:
718 if ((fc
& IEEE80211_FCTL_TODS
)
719 && (fc
& IEEE80211_FCTL_FROMDS
))
725 case IEEE80211_FTYPE_MGMT
:
729 case IEEE80211_FTYPE_CTL
:
730 switch (fc
& IEEE80211_FCTL_STYPE
) {
731 case IEEE80211_STYPE_PSPOLL
:
732 case IEEE80211_STYPE_RTS
:
733 case IEEE80211_STYPE_CFEND
:
734 case IEEE80211_STYPE_CFENDACK
:
737 case IEEE80211_STYPE_CTS
:
738 case IEEE80211_STYPE_ACK
:
744 /* Unknown frame type */
748 /* sanity check the length */
749 if (datalen
> IEEE80211_MAX_DATA_LEN
+ 12) {
750 printk(KERN_DEBUG
"%s: oversized monitor frame, "
751 "data length = %d\n", dev
->name
, datalen
);
752 stats
->rx_length_errors
++;
756 skb
= dev_alloc_skb(hdrlen
+ datalen
);
758 printk(KERN_WARNING
"%s: Cannot allocate skb for monitor frame\n",
763 /* Copy the 802.11 header to the skb */
764 memcpy(skb_put(skb
, hdrlen
), &(desc
->frame_ctl
), hdrlen
);
765 skb_reset_mac_header(skb
);
767 /* If any, copy the data from the card to the skb */
769 err
= hermes_bap_pread(hw
, IRQ_BAP
, skb_put(skb
, datalen
),
770 ALIGN(datalen
, 2), rxfid
,
771 HERMES_802_2_OFFSET
);
773 printk(KERN_ERR
"%s: error %d reading monitor frame\n",
780 skb
->ip_summed
= CHECKSUM_NONE
;
781 skb
->pkt_type
= PACKET_OTHERHOST
;
782 skb
->protocol
= cpu_to_be16(ETH_P_802_2
);
785 stats
->rx_bytes
+= skb
->len
;
791 dev_kfree_skb_irq(skb
);
797 static void __orinoco_ev_rx(struct net_device
*dev
, hermes_t
*hw
)
799 struct orinoco_private
*priv
= ndev_priv(dev
);
800 struct net_device_stats
*stats
= &priv
->stats
;
801 struct iw_statistics
*wstats
= &priv
->wstats
;
802 struct sk_buff
*skb
= NULL
;
805 struct hermes_rx_descriptor
*desc
;
806 struct orinoco_rx_data
*rx_data
;
809 desc
= kmalloc(sizeof(*desc
), GFP_ATOMIC
);
812 "%s: Can't allocate space for RX descriptor\n",
817 rxfid
= hermes_read_regn(hw
, RXFID
);
819 err
= hermes_bap_pread(hw
, IRQ_BAP
, desc
, sizeof(*desc
),
822 printk(KERN_ERR
"%s: error %d reading Rx descriptor. "
823 "Frame dropped.\n", dev
->name
, err
);
827 status
= le16_to_cpu(desc
->status
);
829 if (status
& HERMES_RXSTAT_BADCRC
) {
830 DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
832 stats
->rx_crc_errors
++;
836 /* Handle frames in monitor mode */
837 if (priv
->iw_mode
== NL80211_IFTYPE_MONITOR
) {
838 orinoco_rx_monitor(dev
, rxfid
, desc
);
842 if (status
& HERMES_RXSTAT_UNDECRYPTABLE
) {
843 DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
845 wstats
->discard
.code
++;
849 length
= le16_to_cpu(desc
->data_len
);
852 if (length
< 3) { /* No for even an 802.2 LLC header */
853 /* At least on Symbol firmware with PCF we get quite a
854 lot of these legitimately - Poll frames with no
858 if (length
> IEEE80211_MAX_DATA_LEN
) {
859 printk(KERN_WARNING
"%s: Oversized frame received (%d bytes)\n",
861 stats
->rx_length_errors
++;
865 /* Payload size does not include Michael MIC. Increase payload
866 * size to read it together with the data. */
867 if (status
& HERMES_RXSTAT_MIC
)
868 length
+= MICHAEL_MIC_LEN
;
870 /* We need space for the packet data itself, plus an ethernet
871 header, plus 2 bytes so we can align the IP header on a
872 32bit boundary, plus 1 byte so we can read in odd length
873 packets from the card, which has an IO granularity of 16
875 skb
= dev_alloc_skb(length
+ETH_HLEN
+2+1);
877 printk(KERN_WARNING
"%s: Can't allocate skb for Rx\n",
882 /* We'll prepend the header, so reserve space for it. The worst
883 case is no decapsulation, when 802.3 header is prepended and
884 nothing is removed. 2 is for aligning the IP header. */
885 skb_reserve(skb
, ETH_HLEN
+ 2);
887 err
= hermes_bap_pread(hw
, IRQ_BAP
, skb_put(skb
, length
),
888 ALIGN(length
, 2), rxfid
,
889 HERMES_802_2_OFFSET
);
891 printk(KERN_ERR
"%s: error %d reading frame. "
892 "Frame dropped.\n", dev
->name
, err
);
896 /* Add desc and skb to rx queue */
897 rx_data
= kzalloc(sizeof(*rx_data
), GFP_ATOMIC
);
899 printk(KERN_WARNING
"%s: Can't allocate RX packet\n",
903 rx_data
->desc
= desc
;
905 list_add_tail(&rx_data
->list
, &priv
->rx_list
);
906 tasklet_schedule(&priv
->rx_tasklet
);
911 dev_kfree_skb_irq(skb
);
919 static void orinoco_rx(struct net_device
*dev
,
920 struct hermes_rx_descriptor
*desc
,
923 struct orinoco_private
*priv
= ndev_priv(dev
);
924 struct net_device_stats
*stats
= &priv
->stats
;
929 status
= le16_to_cpu(desc
->status
);
930 length
= le16_to_cpu(desc
->data_len
);
931 fc
= le16_to_cpu(desc
->frame_ctl
);
933 /* Calculate and check MIC */
934 if (status
& HERMES_RXSTAT_MIC
) {
935 struct orinoco_tkip_key
*key
;
936 int key_id
= ((status
& HERMES_RXSTAT_MIC_KEY_ID
) >>
937 HERMES_MIC_KEY_ID_SHIFT
);
938 u8 mic
[MICHAEL_MIC_LEN
];
940 u8
*src
= (fc
& IEEE80211_FCTL_FROMDS
) ?
941 desc
->addr3
: desc
->addr2
;
943 /* Extract Michael MIC from payload */
944 rxmic
= skb
->data
+ skb
->len
- MICHAEL_MIC_LEN
;
946 skb_trim(skb
, skb
->len
- MICHAEL_MIC_LEN
);
947 length
-= MICHAEL_MIC_LEN
;
949 key
= (struct orinoco_tkip_key
*) priv
->keys
[key_id
].key
;
952 printk(KERN_WARNING
"%s: Received encrypted frame from "
953 "%pM using key %i, but key is not installed\n",
954 dev
->name
, src
, key_id
);
958 orinoco_mic(priv
->rx_tfm_mic
, key
->rx_mic
, desc
->addr1
, src
,
959 0, /* priority or QoS? */
960 skb
->data
, skb
->len
, &mic
[0]);
962 if (memcmp(mic
, rxmic
,
964 union iwreq_data wrqu
;
965 struct iw_michaelmicfailure wxmic
;
967 printk(KERN_WARNING
"%s: "
968 "Invalid Michael MIC in data frame from %pM, "
970 dev
->name
, src
, key_id
);
972 /* TODO: update stats */
974 /* Notify userspace */
975 memset(&wxmic
, 0, sizeof(wxmic
));
976 wxmic
.flags
= key_id
& IW_MICFAILURE_KEY_ID
;
977 wxmic
.flags
|= (desc
->addr1
[0] & 1) ?
978 IW_MICFAILURE_GROUP
: IW_MICFAILURE_PAIRWISE
;
979 wxmic
.src_addr
.sa_family
= ARPHRD_ETHER
;
980 memcpy(wxmic
.src_addr
.sa_data
, src
, ETH_ALEN
);
982 (void) orinoco_hw_get_tkip_iv(priv
, key_id
,
985 memset(&wrqu
, 0, sizeof(wrqu
));
986 wrqu
.data
.length
= sizeof(wxmic
);
987 wireless_send_event(dev
, IWEVMICHAELMICFAILURE
, &wrqu
,
994 /* Handle decapsulation
995 * In most cases, the firmware tell us about SNAP frames.
996 * For some reason, the SNAP frames sent by LinkSys APs
997 * are not properly recognised by most firmwares.
998 * So, check ourselves */
999 if (length
>= ENCAPS_OVERHEAD
&&
1000 (((status
& HERMES_RXSTAT_MSGTYPE
) == HERMES_RXSTAT_1042
) ||
1001 ((status
& HERMES_RXSTAT_MSGTYPE
) == HERMES_RXSTAT_TUNNEL
) ||
1002 is_ethersnap(skb
->data
))) {
1003 /* These indicate a SNAP within 802.2 LLC within
1004 802.11 frame which we'll need to de-encapsulate to
1005 the original EthernetII frame. */
1006 hdr
= (struct ethhdr
*)skb_push(skb
,
1007 ETH_HLEN
- ENCAPS_OVERHEAD
);
1009 /* 802.3 frame - prepend 802.3 header as is */
1010 hdr
= (struct ethhdr
*)skb_push(skb
, ETH_HLEN
);
1011 hdr
->h_proto
= htons(length
);
1013 memcpy(hdr
->h_dest
, desc
->addr1
, ETH_ALEN
);
1014 if (fc
& IEEE80211_FCTL_FROMDS
)
1015 memcpy(hdr
->h_source
, desc
->addr3
, ETH_ALEN
);
1017 memcpy(hdr
->h_source
, desc
->addr2
, ETH_ALEN
);
1019 skb
->protocol
= eth_type_trans(skb
, dev
);
1020 skb
->ip_summed
= CHECKSUM_NONE
;
1021 if (fc
& IEEE80211_FCTL_TODS
)
1022 skb
->pkt_type
= PACKET_OTHERHOST
;
1024 /* Process the wireless stats if needed */
1025 orinoco_stat_gather(dev
, skb
, desc
);
1027 /* Pass the packet to the networking stack */
1029 stats
->rx_packets
++;
1030 stats
->rx_bytes
+= length
;
1037 stats
->rx_dropped
++;
1040 static void orinoco_rx_isr_tasklet(unsigned long data
)
1042 struct orinoco_private
*priv
= (struct orinoco_private
*) data
;
1043 struct net_device
*dev
= priv
->ndev
;
1044 struct orinoco_rx_data
*rx_data
, *temp
;
1045 struct hermes_rx_descriptor
*desc
;
1046 struct sk_buff
*skb
;
1047 unsigned long flags
;
1049 /* orinoco_rx requires the driver lock, and we also need to
1050 * protect priv->rx_list, so just hold the lock over the
1053 * If orinoco_lock fails, we've unplugged the card. In this
1054 * case just abort. */
1055 if (orinoco_lock(priv
, &flags
) != 0)
1058 /* extract desc and skb from queue */
1059 list_for_each_entry_safe(rx_data
, temp
, &priv
->rx_list
, list
) {
1060 desc
= rx_data
->desc
;
1062 list_del(&rx_data
->list
);
1065 orinoco_rx(dev
, desc
, skb
);
1070 orinoco_unlock(priv
, &flags
);
1073 /********************************************************************/
1074 /* Rx path (info frames) */
1075 /********************************************************************/
1077 static void print_linkstatus(struct net_device
*dev
, u16 status
)
1081 if (suppress_linkstatus
)
1085 case HERMES_LINKSTATUS_NOT_CONNECTED
:
1086 s
= "Not Connected";
1088 case HERMES_LINKSTATUS_CONNECTED
:
1091 case HERMES_LINKSTATUS_DISCONNECTED
:
1094 case HERMES_LINKSTATUS_AP_CHANGE
:
1097 case HERMES_LINKSTATUS_AP_OUT_OF_RANGE
:
1098 s
= "AP Out of Range";
1100 case HERMES_LINKSTATUS_AP_IN_RANGE
:
1103 case HERMES_LINKSTATUS_ASSOC_FAILED
:
1104 s
= "Association Failed";
1110 printk(KERN_DEBUG
"%s: New link status: %s (%04x)\n",
1111 dev
->name
, s
, status
);
1114 /* Search scan results for requested BSSID, join it if found */
1115 static void orinoco_join_ap(struct work_struct
*work
)
1117 struct orinoco_private
*priv
=
1118 container_of(work
, struct orinoco_private
, join_work
);
1119 struct net_device
*dev
= priv
->ndev
;
1120 struct hermes
*hw
= &priv
->hw
;
1122 unsigned long flags
;
1126 } __attribute__ ((packed
)) req
;
1127 const int atom_len
= offsetof(struct prism2_scan_apinfo
, atim
);
1128 struct prism2_scan_apinfo
*atom
= NULL
;
1134 /* Allocate buffer for scan results */
1135 buf
= kmalloc(MAX_SCAN_LEN
, GFP_KERNEL
);
1139 if (orinoco_lock(priv
, &flags
) != 0)
1142 /* Sanity checks in case user changed something in the meantime */
1143 if (!priv
->bssid_fixed
)
1146 if (strlen(priv
->desired_essid
) == 0)
1149 /* Read scan results from the firmware */
1150 err
= hermes_read_ltv(hw
, USER_BAP
,
1151 HERMES_RID_SCANRESULTSTABLE
,
1152 MAX_SCAN_LEN
, &len
, buf
);
1154 printk(KERN_ERR
"%s: Cannot read scan results\n",
1159 len
= HERMES_RECLEN_TO_BYTES(len
);
1161 /* Go through the scan results looking for the channel of the AP
1162 * we were requested to join */
1163 for (; offset
+ atom_len
<= len
; offset
+= atom_len
) {
1164 atom
= (struct prism2_scan_apinfo
*) (buf
+ offset
);
1165 if (memcmp(&atom
->bssid
, priv
->desired_bssid
, ETH_ALEN
) == 0) {
1172 DEBUG(1, "%s: Requested AP not found in scan results\n",
1177 memcpy(req
.bssid
, priv
->desired_bssid
, ETH_ALEN
);
1178 req
.channel
= atom
->channel
; /* both are little-endian */
1179 err
= HERMES_WRITE_RECORD(hw
, USER_BAP
, HERMES_RID_CNFJOINREQUEST
,
1182 printk(KERN_ERR
"%s: Error issuing join request\n", dev
->name
);
1185 orinoco_unlock(priv
, &flags
);
1191 /* Send new BSSID to userspace */
1192 static void orinoco_send_bssid_wevent(struct orinoco_private
*priv
)
1194 struct net_device
*dev
= priv
->ndev
;
1195 struct hermes
*hw
= &priv
->hw
;
1196 union iwreq_data wrqu
;
1199 err
= hermes_read_ltv(hw
, USER_BAP
, HERMES_RID_CURRENTBSSID
,
1200 ETH_ALEN
, NULL
, wrqu
.ap_addr
.sa_data
);
1204 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
1206 /* Send event to user space */
1207 wireless_send_event(dev
, SIOCGIWAP
, &wrqu
, NULL
);
1210 static void orinoco_send_assocreqie_wevent(struct orinoco_private
*priv
)
1212 struct net_device
*dev
= priv
->ndev
;
1213 struct hermes
*hw
= &priv
->hw
;
1214 union iwreq_data wrqu
;
1222 err
= hermes_read_ltv(hw
, USER_BAP
, HERMES_RID_CURRENT_ASSOC_REQ_INFO
,
1223 sizeof(buf
), NULL
, &buf
);
1227 ie
= orinoco_get_wpa_ie(buf
, sizeof(buf
));
1229 int rem
= sizeof(buf
) - (ie
- &buf
[0]);
1230 wrqu
.data
.length
= ie
[1] + 2;
1231 if (wrqu
.data
.length
> rem
)
1232 wrqu
.data
.length
= rem
;
1234 if (wrqu
.data
.length
)
1235 /* Send event to user space */
1236 wireless_send_event(dev
, IWEVASSOCREQIE
, &wrqu
, ie
);
1240 static void orinoco_send_assocrespie_wevent(struct orinoco_private
*priv
)
1242 struct net_device
*dev
= priv
->ndev
;
1243 struct hermes
*hw
= &priv
->hw
;
1244 union iwreq_data wrqu
;
1246 u8 buf
[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
1252 err
= hermes_read_ltv(hw
, USER_BAP
, HERMES_RID_CURRENT_ASSOC_RESP_INFO
,
1253 sizeof(buf
), NULL
, &buf
);
1257 ie
= orinoco_get_wpa_ie(buf
, sizeof(buf
));
1259 int rem
= sizeof(buf
) - (ie
- &buf
[0]);
1260 wrqu
.data
.length
= ie
[1] + 2;
1261 if (wrqu
.data
.length
> rem
)
1262 wrqu
.data
.length
= rem
;
1264 if (wrqu
.data
.length
)
1265 /* Send event to user space */
1266 wireless_send_event(dev
, IWEVASSOCRESPIE
, &wrqu
, ie
);
1270 static void orinoco_send_wevents(struct work_struct
*work
)
1272 struct orinoco_private
*priv
=
1273 container_of(work
, struct orinoco_private
, wevent_work
);
1274 unsigned long flags
;
1276 if (orinoco_lock(priv
, &flags
) != 0)
1279 orinoco_send_assocreqie_wevent(priv
);
1280 orinoco_send_assocrespie_wevent(priv
);
1281 orinoco_send_bssid_wevent(priv
);
1283 orinoco_unlock(priv
, &flags
);
1286 static void qbuf_scan(struct orinoco_private
*priv
, void *buf
,
1289 struct orinoco_scan_data
*sd
;
1290 unsigned long flags
;
1292 sd
= kmalloc(sizeof(*sd
), GFP_ATOMIC
);
1297 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1298 list_add_tail(&sd
->list
, &priv
->scan_list
);
1299 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1301 schedule_work(&priv
->process_scan
);
1304 static void qabort_scan(struct orinoco_private
*priv
)
1306 struct orinoco_scan_data
*sd
;
1307 unsigned long flags
;
1309 sd
= kmalloc(sizeof(*sd
), GFP_ATOMIC
);
1310 sd
->len
= -1; /* Abort */
1312 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1313 list_add_tail(&sd
->list
, &priv
->scan_list
);
1314 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1316 schedule_work(&priv
->process_scan
);
1319 static void orinoco_process_scan_results(struct work_struct
*work
)
1321 struct orinoco_private
*priv
=
1322 container_of(work
, struct orinoco_private
, process_scan
);
1323 struct orinoco_scan_data
*sd
, *temp
;
1324 unsigned long flags
;
1329 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1330 list_for_each_entry_safe(sd
, temp
, &priv
->scan_list
, list
) {
1331 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1337 list_del(&sd
->list
);
1341 if (type
== HERMES_INQ_CHANNELINFO
)
1342 orinoco_add_extscan_result(priv
, buf
, len
);
1344 orinoco_add_hostscan_results(priv
, buf
, len
);
1347 } else if (priv
->scan_request
) {
1348 /* Either abort or complete the scan */
1349 cfg80211_scan_done(priv
->scan_request
, (len
< 0));
1350 priv
->scan_request
= NULL
;
1353 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1355 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1358 static void __orinoco_ev_info(struct net_device
*dev
, hermes_t
*hw
)
1360 struct orinoco_private
*priv
= ndev_priv(dev
);
1365 } __attribute__ ((packed
)) info
;
1369 /* This is an answer to an INQUIRE command that we did earlier,
1370 * or an information "event" generated by the card
1371 * The controller return to us a pseudo frame containing
1372 * the information in question - Jean II */
1373 infofid
= hermes_read_regn(hw
, INFOFID
);
1375 /* Read the info frame header - don't try too hard */
1376 err
= hermes_bap_pread(hw
, IRQ_BAP
, &info
, sizeof(info
),
1379 printk(KERN_ERR
"%s: error %d reading info frame. "
1380 "Frame dropped.\n", dev
->name
, err
);
1384 len
= HERMES_RECLEN_TO_BYTES(le16_to_cpu(info
.len
));
1385 type
= le16_to_cpu(info
.type
);
1388 case HERMES_INQ_TALLIES
: {
1389 struct hermes_tallies_frame tallies
;
1390 struct iw_statistics
*wstats
= &priv
->wstats
;
1392 if (len
> sizeof(tallies
)) {
1393 printk(KERN_WARNING
"%s: Tallies frame too long (%d bytes)\n",
1395 len
= sizeof(tallies
);
1398 err
= hermes_bap_pread(hw
, IRQ_BAP
, &tallies
, len
,
1399 infofid
, sizeof(info
));
1403 /* Increment our various counters */
1404 /* wstats->discard.nwid - no wrong BSSID stuff */
1405 wstats
->discard
.code
+=
1406 le16_to_cpu(tallies
.RxWEPUndecryptable
);
1407 if (len
== sizeof(tallies
))
1408 wstats
->discard
.code
+=
1409 le16_to_cpu(tallies
.RxDiscards_WEPICVError
) +
1410 le16_to_cpu(tallies
.RxDiscards_WEPExcluded
);
1411 wstats
->discard
.misc
+=
1412 le16_to_cpu(tallies
.TxDiscardsWrongSA
);
1413 wstats
->discard
.fragment
+=
1414 le16_to_cpu(tallies
.RxMsgInBadMsgFragments
);
1415 wstats
->discard
.retries
+=
1416 le16_to_cpu(tallies
.TxRetryLimitExceeded
);
1417 /* wstats->miss.beacon - no match */
1420 case HERMES_INQ_LINKSTATUS
: {
1421 struct hermes_linkstatus linkstatus
;
1425 if (priv
->iw_mode
== NL80211_IFTYPE_MONITOR
)
1428 if (len
!= sizeof(linkstatus
)) {
1429 printk(KERN_WARNING
"%s: Unexpected size for linkstatus frame (%d bytes)\n",
1434 err
= hermes_bap_pread(hw
, IRQ_BAP
, &linkstatus
, len
,
1435 infofid
, sizeof(info
));
1438 newstatus
= le16_to_cpu(linkstatus
.linkstatus
);
1440 /* Symbol firmware uses "out of range" to signal that
1441 * the hostscan frame can be requested. */
1442 if (newstatus
== HERMES_LINKSTATUS_AP_OUT_OF_RANGE
&&
1443 priv
->firmware_type
== FIRMWARE_TYPE_SYMBOL
&&
1444 priv
->has_hostscan
&& priv
->scan_request
) {
1445 hermes_inquire(hw
, HERMES_INQ_HOSTSCAN_SYMBOL
);
1449 connected
= (newstatus
== HERMES_LINKSTATUS_CONNECTED
)
1450 || (newstatus
== HERMES_LINKSTATUS_AP_CHANGE
)
1451 || (newstatus
== HERMES_LINKSTATUS_AP_IN_RANGE
);
1454 netif_carrier_on(dev
);
1455 else if (!ignore_disconnect
)
1456 netif_carrier_off(dev
);
1458 if (newstatus
!= priv
->last_linkstatus
) {
1459 priv
->last_linkstatus
= newstatus
;
1460 print_linkstatus(dev
, newstatus
);
1461 /* The info frame contains only one word which is the
1462 * status (see hermes.h). The status is pretty boring
1463 * in itself, that's why we export the new BSSID...
1465 schedule_work(&priv
->wevent_work
);
1469 case HERMES_INQ_SCAN
:
1470 if (!priv
->scan_request
&& priv
->bssid_fixed
&&
1471 priv
->firmware_type
== FIRMWARE_TYPE_INTERSIL
) {
1472 schedule_work(&priv
->join_work
);
1476 case HERMES_INQ_HOSTSCAN
:
1477 case HERMES_INQ_HOSTSCAN_SYMBOL
: {
1478 /* Result of a scanning. Contains information about
1479 * cells in the vicinity - Jean II */
1484 printk(KERN_WARNING
"%s: Scan results too large (%d bytes)\n",
1490 /* Allocate buffer for results */
1491 buf
= kmalloc(len
, GFP_ATOMIC
);
1493 /* No memory, so can't printk()... */
1498 /* Read scan data */
1499 err
= hermes_bap_pread(hw
, IRQ_BAP
, (void *) buf
, len
,
1500 infofid
, sizeof(info
));
1507 #ifdef ORINOCO_DEBUG
1510 printk(KERN_DEBUG
"Scan result [%02X", buf
[0]);
1511 for (i
= 1; i
< (len
* 2); i
++)
1512 printk(":%02X", buf
[i
]);
1515 #endif /* ORINOCO_DEBUG */
1517 qbuf_scan(priv
, buf
, len
, type
);
1520 case HERMES_INQ_CHANNELINFO
:
1522 struct agere_ext_scan_info
*bss
;
1524 if (!priv
->scan_request
) {
1525 printk(KERN_DEBUG
"%s: Got chaninfo without scan, "
1526 "len=%d\n", dev
->name
, len
);
1530 /* An empty result indicates that the scan is complete */
1532 qbuf_scan(priv
, NULL
, len
, type
);
1537 else if (len
< (offsetof(struct agere_ext_scan_info
,
1539 /* Drop this result now so we don't have to
1540 * keep checking later */
1542 "%s: Ext scan results too short (%d bytes)\n",
1547 bss
= kmalloc(len
, GFP_ATOMIC
);
1551 /* Read scan data */
1552 err
= hermes_bap_pread(hw
, IRQ_BAP
, (void *) bss
, len
,
1553 infofid
, sizeof(info
));
1557 qbuf_scan(priv
, bss
, len
, type
);
1561 case HERMES_INQ_SEC_STAT_AGERE
:
1562 /* Security status (Agere specific) */
1563 /* Ignore this frame for now */
1564 if (priv
->firmware_type
== FIRMWARE_TYPE_AGERE
)
1568 printk(KERN_DEBUG
"%s: Unknown information frame received: "
1569 "type 0x%04x, length %d\n", dev
->name
, type
, len
);
1570 /* We don't actually do anything about it */
1577 static void __orinoco_ev_infdrop(struct net_device
*dev
, hermes_t
*hw
)
1579 if (net_ratelimit())
1580 printk(KERN_DEBUG
"%s: Information frame lost.\n", dev
->name
);
1583 /********************************************************************/
1584 /* Internal hardware control routines */
1585 /********************************************************************/
1587 static int __orinoco_up(struct orinoco_private
*priv
)
1589 struct net_device
*dev
= priv
->ndev
;
1590 struct hermes
*hw
= &priv
->hw
;
1593 netif_carrier_off(dev
); /* just to make sure */
1595 err
= __orinoco_commit(priv
);
1597 printk(KERN_ERR
"%s: Error %d configuring card\n",
1602 /* Fire things up again */
1603 hermes_set_irqmask(hw
, ORINOCO_INTEN
);
1604 err
= hermes_enable_port(hw
, 0);
1606 printk(KERN_ERR
"%s: Error %d enabling MAC port\n",
1611 netif_start_queue(dev
);
1616 static int __orinoco_down(struct orinoco_private
*priv
)
1618 struct net_device
*dev
= priv
->ndev
;
1619 struct hermes
*hw
= &priv
->hw
;
1622 netif_stop_queue(dev
);
1624 if (!priv
->hw_unavailable
) {
1625 if (!priv
->broken_disableport
) {
1626 err
= hermes_disable_port(hw
, 0);
1628 /* Some firmwares (e.g. Intersil 1.3.x) seem
1629 * to have problems disabling the port, oh
1631 printk(KERN_WARNING
"%s: Error %d disabling MAC port\n",
1633 priv
->broken_disableport
= 1;
1636 hermes_set_irqmask(hw
, 0);
1637 hermes_write_regn(hw
, EVACK
, 0xffff);
1640 /* firmware will have to reassociate */
1641 netif_carrier_off(dev
);
1642 priv
->last_linkstatus
= 0xffff;
1647 static int orinoco_reinit_firmware(struct orinoco_private
*priv
)
1649 struct hermes
*hw
= &priv
->hw
;
1652 err
= hermes_init(hw
);
1653 if (priv
->do_fw_download
&& !err
) {
1654 err
= orinoco_download(priv
);
1656 priv
->do_fw_download
= 0;
1659 err
= orinoco_hw_allocate_fid(priv
);
1665 __orinoco_set_multicast_list(struct net_device
*dev
)
1667 struct orinoco_private
*priv
= ndev_priv(dev
);
1669 int promisc
, mc_count
;
1671 /* The Hermes doesn't seem to have an allmulti mode, so we go
1672 * into promiscuous mode and let the upper levels deal. */
1673 if ((dev
->flags
& IFF_PROMISC
) || (dev
->flags
& IFF_ALLMULTI
) ||
1674 (dev
->mc_count
> MAX_MULTICAST(priv
))) {
1679 mc_count
= dev
->mc_count
;
1682 err
= __orinoco_hw_set_multicast_list(priv
, dev
->mc_list
, mc_count
,
1688 /* This must be called from user context, without locks held - use
1689 * schedule_work() */
1690 void orinoco_reset(struct work_struct
*work
)
1692 struct orinoco_private
*priv
=
1693 container_of(work
, struct orinoco_private
, reset_work
);
1694 struct net_device
*dev
= priv
->ndev
;
1695 struct hermes
*hw
= &priv
->hw
;
1697 unsigned long flags
;
1699 if (orinoco_lock(priv
, &flags
) != 0)
1700 /* When the hardware becomes available again, whatever
1701 * detects that is responsible for re-initializing
1702 * it. So no need for anything further */
1705 netif_stop_queue(dev
);
1707 /* Shut off interrupts. Depending on what state the hardware
1708 * is in, this might not work, but we'll try anyway */
1709 hermes_set_irqmask(hw
, 0);
1710 hermes_write_regn(hw
, EVACK
, 0xffff);
1712 priv
->hw_unavailable
++;
1713 priv
->last_linkstatus
= 0xffff; /* firmware will have to reassociate */
1714 netif_carrier_off(dev
);
1716 orinoco_unlock(priv
, &flags
);
1718 /* Scanning support: Notify scan cancellation */
1719 if (priv
->scan_request
) {
1720 cfg80211_scan_done(priv
->scan_request
, 1);
1721 priv
->scan_request
= NULL
;
1724 if (priv
->hard_reset
) {
1725 err
= (*priv
->hard_reset
)(priv
);
1727 printk(KERN_ERR
"%s: orinoco_reset: Error %d "
1728 "performing hard reset\n", dev
->name
, err
);
1733 err
= orinoco_reinit_firmware(priv
);
1735 printk(KERN_ERR
"%s: orinoco_reset: Error %d re-initializing firmware\n",
1740 /* This has to be called from user context */
1741 spin_lock_irq(&priv
->lock
);
1743 priv
->hw_unavailable
--;
1745 /* priv->open or priv->hw_unavailable might have changed while
1746 * we dropped the lock */
1747 if (priv
->open
&& (!priv
->hw_unavailable
)) {
1748 err
= __orinoco_up(priv
);
1750 printk(KERN_ERR
"%s: orinoco_reset: Error %d reenabling card\n",
1753 dev
->trans_start
= jiffies
;
1756 spin_unlock_irq(&priv
->lock
);
1760 hermes_set_irqmask(hw
, 0);
1761 netif_device_detach(dev
);
1762 printk(KERN_ERR
"%s: Device has been disabled!\n", dev
->name
);
1765 static int __orinoco_commit(struct orinoco_private
*priv
)
1767 struct net_device
*dev
= priv
->ndev
;
1770 err
= orinoco_hw_program_rids(priv
);
1772 /* FIXME: what about netif_tx_lock */
1773 (void) __orinoco_set_multicast_list(dev
);
1778 /* Ensures configuration changes are applied. May result in a reset.
1779 * The caller should hold priv->lock
1781 int orinoco_commit(struct orinoco_private
*priv
)
1783 struct net_device
*dev
= priv
->ndev
;
1784 hermes_t
*hw
= &priv
->hw
;
1787 if (priv
->broken_disableport
) {
1788 schedule_work(&priv
->reset_work
);
1792 err
= hermes_disable_port(hw
, 0);
1794 printk(KERN_WARNING
"%s: Unable to disable port "
1795 "while reconfiguring card\n", dev
->name
);
1796 priv
->broken_disableport
= 1;
1800 err
= __orinoco_commit(priv
);
1802 printk(KERN_WARNING
"%s: Unable to reconfigure card\n",
1807 err
= hermes_enable_port(hw
, 0);
1809 printk(KERN_WARNING
"%s: Unable to enable port while reconfiguring card\n",
1816 printk(KERN_WARNING
"%s: Resetting instead...\n", dev
->name
);
1817 schedule_work(&priv
->reset_work
);
1823 /********************************************************************/
1824 /* Interrupt handler */
1825 /********************************************************************/
1827 static void __orinoco_ev_tick(struct net_device
*dev
, hermes_t
*hw
)
1829 printk(KERN_DEBUG
"%s: TICK\n", dev
->name
);
1832 static void __orinoco_ev_wterr(struct net_device
*dev
, hermes_t
*hw
)
1834 /* This seems to happen a fair bit under load, but ignoring it
1835 seems to work fine...*/
1836 printk(KERN_DEBUG
"%s: MAC controller error (WTERR). Ignoring.\n",
1840 irqreturn_t
orinoco_interrupt(int irq
, void *dev_id
)
1842 struct orinoco_private
*priv
= dev_id
;
1843 struct net_device
*dev
= priv
->ndev
;
1844 hermes_t
*hw
= &priv
->hw
;
1845 int count
= MAX_IRQLOOPS_PER_IRQ
;
1847 /* These are used to detect a runaway interrupt situation.
1849 * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
1850 * we panic and shut down the hardware
1852 /* jiffies value the last time we were called */
1853 static int last_irq_jiffy
; /* = 0 */
1854 static int loops_this_jiffy
; /* = 0 */
1855 unsigned long flags
;
1857 if (orinoco_lock(priv
, &flags
) != 0) {
1858 /* If hw is unavailable - we don't know if the irq was
1863 evstat
= hermes_read_regn(hw
, EVSTAT
);
1864 events
= evstat
& hw
->inten
;
1866 orinoco_unlock(priv
, &flags
);
1870 if (jiffies
!= last_irq_jiffy
)
1871 loops_this_jiffy
= 0;
1872 last_irq_jiffy
= jiffies
;
1874 while (events
&& count
--) {
1875 if (++loops_this_jiffy
> MAX_IRQLOOPS_PER_JIFFY
) {
1876 printk(KERN_WARNING
"%s: IRQ handler is looping too "
1877 "much! Resetting.\n", dev
->name
);
1878 /* Disable interrupts for now */
1879 hermes_set_irqmask(hw
, 0);
1880 schedule_work(&priv
->reset_work
);
1884 /* Check the card hasn't been removed */
1885 if (!hermes_present(hw
)) {
1886 DEBUG(0, "orinoco_interrupt(): card removed\n");
1890 if (events
& HERMES_EV_TICK
)
1891 __orinoco_ev_tick(dev
, hw
);
1892 if (events
& HERMES_EV_WTERR
)
1893 __orinoco_ev_wterr(dev
, hw
);
1894 if (events
& HERMES_EV_INFDROP
)
1895 __orinoco_ev_infdrop(dev
, hw
);
1896 if (events
& HERMES_EV_INFO
)
1897 __orinoco_ev_info(dev
, hw
);
1898 if (events
& HERMES_EV_RX
)
1899 __orinoco_ev_rx(dev
, hw
);
1900 if (events
& HERMES_EV_TXEXC
)
1901 __orinoco_ev_txexc(dev
, hw
);
1902 if (events
& HERMES_EV_TX
)
1903 __orinoco_ev_tx(dev
, hw
);
1904 if (events
& HERMES_EV_ALLOC
)
1905 __orinoco_ev_alloc(dev
, hw
);
1907 hermes_write_regn(hw
, EVACK
, evstat
);
1909 evstat
= hermes_read_regn(hw
, EVSTAT
);
1910 events
= evstat
& hw
->inten
;
1913 orinoco_unlock(priv
, &flags
);
1916 EXPORT_SYMBOL(orinoco_interrupt
);
1918 /********************************************************************/
1919 /* Power management */
1920 /********************************************************************/
1921 #if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT)
1922 static int orinoco_pm_notifier(struct notifier_block
*notifier
,
1923 unsigned long pm_event
,
1926 struct orinoco_private
*priv
= container_of(notifier
,
1927 struct orinoco_private
,
1930 /* All we need to do is cache the firmware before suspend, and
1931 * release it when we come out.
1933 * Only need to do this if we're downloading firmware. */
1934 if (!priv
->do_fw_download
)
1938 case PM_HIBERNATION_PREPARE
:
1939 case PM_SUSPEND_PREPARE
:
1940 orinoco_cache_fw(priv
, 0);
1943 case PM_POST_RESTORE
:
1944 /* Restore from hibernation failed. We need to clean
1945 * up in exactly the same way, so fall through. */
1946 case PM_POST_HIBERNATION
:
1947 case PM_POST_SUSPEND
:
1948 orinoco_uncache_fw(priv
);
1951 case PM_RESTORE_PREPARE
:
1959 static void orinoco_register_pm_notifier(struct orinoco_private
*priv
)
1961 priv
->pm_notifier
.notifier_call
= orinoco_pm_notifier
;
1962 register_pm_notifier(&priv
->pm_notifier
);
1965 static void orinoco_unregister_pm_notifier(struct orinoco_private
*priv
)
1967 unregister_pm_notifier(&priv
->pm_notifier
);
1969 #else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
1970 #define orinoco_register_pm_notifier(priv) do { } while(0)
1971 #define orinoco_unregister_pm_notifier(priv) do { } while(0)
1974 /********************************************************************/
1975 /* Initialization */
1976 /********************************************************************/
1978 int orinoco_init(struct orinoco_private
*priv
)
1980 struct device
*dev
= priv
->dev
;
1981 struct wiphy
*wiphy
= priv_to_wiphy(priv
);
1982 hermes_t
*hw
= &priv
->hw
;
1985 /* No need to lock, the hw_unavailable flag is already set in
1986 * alloc_orinocodev() */
1987 priv
->nicbuf_size
= IEEE80211_MAX_FRAME_LEN
+ ETH_HLEN
;
1989 /* Initialize the firmware */
1990 err
= hermes_init(hw
);
1992 dev_err(dev
, "Failed to initialize firmware (err = %d)\n",
1997 err
= determine_fw_capabilities(priv
);
1999 dev_err(dev
, "Incompatible firmware, aborting\n");
2003 if (priv
->do_fw_download
) {
2004 #ifdef CONFIG_HERMES_CACHE_FW_ON_INIT
2005 orinoco_cache_fw(priv
, 0);
2008 err
= orinoco_download(priv
);
2010 priv
->do_fw_download
= 0;
2012 /* Check firmware version again */
2013 err
= determine_fw_capabilities(priv
);
2015 dev_err(dev
, "Incompatible firmware, aborting\n");
2020 if (priv
->has_port3
)
2021 dev_info(dev
, "Ad-hoc demo mode supported\n");
2023 dev_info(dev
, "IEEE standard IBSS ad-hoc mode supported\n");
2025 dev_info(dev
, "WEP supported, %s-bit key\n",
2026 priv
->has_big_wep
? "104" : "40");
2027 if (priv
->has_wpa
) {
2028 dev_info(dev
, "WPA-PSK supported\n");
2029 if (orinoco_mic_init(priv
)) {
2030 dev_err(dev
, "Failed to setup MIC crypto algorithm. "
2031 "Disabling WPA support\n");
2036 err
= orinoco_hw_read_card_settings(priv
, wiphy
->perm_addr
);
2040 err
= orinoco_hw_allocate_fid(priv
);
2042 dev_err(dev
, "Failed to allocate NIC buffer!\n");
2046 /* Set up the default configuration */
2047 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
2048 /* By default use IEEE/IBSS ad-hoc mode if we have it */
2049 priv
->prefer_port3
= priv
->has_port3
&& (!priv
->has_ibss
);
2050 set_port_type(priv
);
2051 priv
->channel
= 0; /* use firmware default */
2053 priv
->promiscuous
= 0;
2054 priv
->encode_alg
= ORINOCO_ALG_NONE
;
2056 priv
->wpa_enabled
= 0;
2057 priv
->tkip_cm_active
= 0;
2059 priv
->wpa_ie_len
= 0;
2060 priv
->wpa_ie
= NULL
;
2062 if (orinoco_wiphy_register(wiphy
)) {
2067 /* Make the hardware available, as long as it hasn't been
2068 * removed elsewhere (e.g. by PCMCIA hot unplug) */
2069 spin_lock_irq(&priv
->lock
);
2070 priv
->hw_unavailable
--;
2071 spin_unlock_irq(&priv
->lock
);
2073 dev_dbg(dev
, "Ready\n");
2078 EXPORT_SYMBOL(orinoco_init
);
2080 static const struct net_device_ops orinoco_netdev_ops
= {
2081 .ndo_open
= orinoco_open
,
2082 .ndo_stop
= orinoco_stop
,
2083 .ndo_start_xmit
= orinoco_xmit
,
2084 .ndo_set_multicast_list
= orinoco_set_multicast_list
,
2085 .ndo_change_mtu
= orinoco_change_mtu
,
2086 .ndo_set_mac_address
= eth_mac_addr
,
2087 .ndo_validate_addr
= eth_validate_addr
,
2088 .ndo_tx_timeout
= orinoco_tx_timeout
,
2089 .ndo_get_stats
= orinoco_get_stats
,
2092 /* Allocate private data.
2094 * This driver has a number of structures associated with it
2095 * netdev - Net device structure for each network interface
2096 * wiphy - structure associated with wireless phy
2097 * wireless_dev (wdev) - structure for each wireless interface
2098 * hw - structure for hermes chip info
2099 * card - card specific structure for use by the card driver
2100 * (airport, orinoco_cs)
2101 * priv - orinoco private data
2102 * device - generic linux device structure
2104 * +---------+ +---------+
2105 * | wiphy | | netdev |
2106 * | +-------+ | +-------+
2107 * | | priv | | | wdev |
2108 * | | +-----+ +-+-------+
2114 * priv has a link to netdev and device
2115 * wdev has a link to wiphy
2117 struct orinoco_private
2118 *alloc_orinocodev(int sizeof_card
,
2119 struct device
*device
,
2120 int (*hard_reset
)(struct orinoco_private
*),
2121 int (*stop_fw
)(struct orinoco_private
*, int))
2123 struct orinoco_private
*priv
;
2124 struct wiphy
*wiphy
;
2127 * NOTE: We only support a single virtual interface
2128 * but this may change when monitor mode is added
2130 wiphy
= wiphy_new(&orinoco_cfg_ops
,
2131 sizeof(struct orinoco_private
) + sizeof_card
);
2135 priv
= wiphy_priv(wiphy
);
2139 priv
->card
= (void *)((unsigned long)priv
2140 + sizeof(struct orinoco_private
));
2144 orinoco_wiphy_init(wiphy
);
2147 priv
->wireless_data
.spy_data
= &priv
->spy_data
;
2150 /* Set up default callbacks */
2151 priv
->hard_reset
= hard_reset
;
2152 priv
->stop_fw
= stop_fw
;
2154 spin_lock_init(&priv
->lock
);
2156 priv
->hw_unavailable
= 1; /* orinoco_init() must clear this
2157 * before anything else touches the
2159 INIT_WORK(&priv
->reset_work
, orinoco_reset
);
2160 INIT_WORK(&priv
->join_work
, orinoco_join_ap
);
2161 INIT_WORK(&priv
->wevent_work
, orinoco_send_wevents
);
2163 INIT_LIST_HEAD(&priv
->rx_list
);
2164 tasklet_init(&priv
->rx_tasklet
, orinoco_rx_isr_tasklet
,
2165 (unsigned long) priv
);
2167 spin_lock_init(&priv
->scan_lock
);
2168 INIT_LIST_HEAD(&priv
->scan_list
);
2169 INIT_WORK(&priv
->process_scan
, orinoco_process_scan_results
);
2171 priv
->last_linkstatus
= 0xffff;
2173 #if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
2174 priv
->cached_pri_fw
= NULL
;
2175 priv
->cached_fw
= NULL
;
2178 /* Register PM notifiers */
2179 orinoco_register_pm_notifier(priv
);
2183 EXPORT_SYMBOL(alloc_orinocodev
);
2185 /* We can only support a single interface. We provide a separate
2186 * function to set it up to distinguish between hardware
2187 * initialisation and interface setup.
2189 * The base_addr and irq parameters are passed on to netdev for use
2192 int orinoco_if_add(struct orinoco_private
*priv
,
2193 unsigned long base_addr
,
2196 struct wiphy
*wiphy
= priv_to_wiphy(priv
);
2197 struct wireless_dev
*wdev
;
2198 struct net_device
*dev
;
2201 dev
= alloc_etherdev(sizeof(struct wireless_dev
));
2206 /* Initialise wireless_dev */
2207 wdev
= netdev_priv(dev
);
2208 wdev
->wiphy
= wiphy
;
2209 wdev
->iftype
= NL80211_IFTYPE_STATION
;
2211 /* Setup / override net_device fields */
2212 dev
->ieee80211_ptr
= wdev
;
2213 dev
->netdev_ops
= &orinoco_netdev_ops
;
2214 dev
->watchdog_timeo
= HZ
; /* 1 second timeout */
2215 dev
->ethtool_ops
= &orinoco_ethtool_ops
;
2216 dev
->wireless_handlers
= &orinoco_handler_def
;
2218 dev
->wireless_data
= &priv
->wireless_data
;
2220 /* we use the default eth_mac_addr for setting the MAC addr */
2222 /* Reserve space in skb for the SNAP header */
2223 dev
->hard_header_len
+= ENCAPS_OVERHEAD
;
2225 netif_carrier_off(dev
);
2227 memcpy(dev
->dev_addr
, wiphy
->perm_addr
, ETH_ALEN
);
2229 dev
->base_addr
= base_addr
;
2232 SET_NETDEV_DEV(dev
, priv
->dev
);
2233 ret
= register_netdev(dev
);
2239 /* Report what we've done */
2240 dev_dbg(priv
->dev
, "Registerred interface %s.\n", dev
->name
);
2248 EXPORT_SYMBOL(orinoco_if_add
);
2250 void orinoco_if_del(struct orinoco_private
*priv
)
2252 struct net_device
*dev
= priv
->ndev
;
2254 unregister_netdev(dev
);
2257 EXPORT_SYMBOL(orinoco_if_del
);
2259 void free_orinocodev(struct orinoco_private
*priv
)
2261 struct wiphy
*wiphy
= priv_to_wiphy(priv
);
2262 struct orinoco_rx_data
*rx_data
, *temp
;
2263 struct orinoco_scan_data
*sd
, *sdtemp
;
2265 wiphy_unregister(wiphy
);
2267 /* If the tasklet is scheduled when we call tasklet_kill it
2268 * will run one final time. However the tasklet will only
2269 * drain priv->rx_list if the hw is still available. */
2270 tasklet_kill(&priv
->rx_tasklet
);
2272 /* Explicitly drain priv->rx_list */
2273 list_for_each_entry_safe(rx_data
, temp
, &priv
->rx_list
, list
) {
2274 list_del(&rx_data
->list
);
2276 dev_kfree_skb(rx_data
->skb
);
2277 kfree(rx_data
->desc
);
2281 cancel_work_sync(&priv
->process_scan
);
2282 /* Explicitly drain priv->scan_list */
2283 list_for_each_entry_safe(sd
, sdtemp
, &priv
->scan_list
, list
) {
2284 list_del(&sd
->list
);
2286 if ((sd
->len
> 0) && sd
->buf
)
2291 orinoco_unregister_pm_notifier(priv
);
2292 orinoco_uncache_fw(priv
);
2294 priv
->wpa_ie_len
= 0;
2295 kfree(priv
->wpa_ie
);
2296 orinoco_mic_free(priv
);
2299 EXPORT_SYMBOL(free_orinocodev
);
2301 int orinoco_up(struct orinoco_private
*priv
)
2303 struct net_device
*dev
= priv
->ndev
;
2304 unsigned long flags
;
2307 spin_lock_irqsave(&priv
->lock
, flags
);
2309 err
= orinoco_reinit_firmware(priv
);
2311 printk(KERN_ERR
"%s: Error %d re-initializing firmware\n",
2316 netif_device_attach(dev
);
2317 priv
->hw_unavailable
--;
2319 if (priv
->open
&& !priv
->hw_unavailable
) {
2320 err
= __orinoco_up(priv
);
2322 printk(KERN_ERR
"%s: Error %d restarting card\n",
2327 spin_unlock_irqrestore(&priv
->lock
, flags
);
2331 EXPORT_SYMBOL(orinoco_up
);
2333 void orinoco_down(struct orinoco_private
*priv
)
2335 struct net_device
*dev
= priv
->ndev
;
2336 unsigned long flags
;
2339 spin_lock_irqsave(&priv
->lock
, flags
);
2340 err
= __orinoco_down(priv
);
2342 printk(KERN_WARNING
"%s: Error %d downing interface\n",
2345 netif_device_detach(dev
);
2346 priv
->hw_unavailable
++;
2347 spin_unlock_irqrestore(&priv
->lock
, flags
);
2349 EXPORT_SYMBOL(orinoco_down
);
2351 static void orinoco_get_drvinfo(struct net_device
*dev
,
2352 struct ethtool_drvinfo
*info
)
2354 struct orinoco_private
*priv
= ndev_priv(dev
);
2356 strncpy(info
->driver
, DRIVER_NAME
, sizeof(info
->driver
) - 1);
2357 strncpy(info
->version
, DRIVER_VERSION
, sizeof(info
->version
) - 1);
2358 strncpy(info
->fw_version
, priv
->fw_name
, sizeof(info
->fw_version
) - 1);
2359 if (dev
->dev
.parent
)
2360 strncpy(info
->bus_info
, dev_name(dev
->dev
.parent
),
2361 sizeof(info
->bus_info
) - 1);
2363 snprintf(info
->bus_info
, sizeof(info
->bus_info
) - 1,
2364 "PCMCIA %p", priv
->hw
.iobase
);
2367 static const struct ethtool_ops orinoco_ethtool_ops
= {
2368 .get_drvinfo
= orinoco_get_drvinfo
,
2369 .get_link
= ethtool_op_get_link
,
2372 /********************************************************************/
2373 /* Module initialization */
2374 /********************************************************************/
2376 /* Can't be declared "const" or the whole __initdata section will
2378 static char version
[] __initdata
= DRIVER_NAME
" " DRIVER_VERSION
2379 " (David Gibson <hermes@gibson.dropbear.id.au>, "
2380 "Pavel Roskin <proski@gnu.org>, et al)";
2382 static int __init
init_orinoco(void)
2384 printk(KERN_DEBUG
"%s\n", version
);
2388 static void __exit
exit_orinoco(void)
2392 module_init(init_orinoco
);
2393 module_exit(exit_orinoco
);