drivers/usb/host/whci/whci-hc.h

   1 /*
   2  * Wireless Host Controller (WHC) data structures.
   3  *
   4  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License version
   8  * 2 as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  18  * 02110-1301, USA.
  19  */
  20 #ifndef _WHCI_WHCI_HC_H
  21 #define _WHCI_WHCI_HC_H
  22
  23 #include <linux/list.h>
  24
  25 /**
  26  * WHCI_PAGE_SIZE - page size use by WHCI
  27  *
  28  * WHCI assumes that host system uses pages of 4096 octets.
  29  */
  30 #define WHCI_PAGE_SIZE 4096
  31
  32
  33 /**
  34  * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single
  35  * qtd.
  36  *
  37  * This is 2^20 - 1.
  38  */
  39 #define QTD_MAX_XFER_SIZE 1048575
  40
  41
  42 /**
  43  * struct whc_qtd - Queue Element Transfer Descriptors (qTD)
  44  *
  45  * This describes the data for a bulk, control or interrupt transfer.
  46  *
  47  * [WHCI] section 3.2.4
  48  */
  49 struct whc_qtd {
  50         __le32 status; /*< remaining transfer len and transfer status */
  51         __le32 options;
  52         __le64 page_list_ptr; /*< physical pointer to data buffer page list*/
  53         __u8   setup[8];      /*< setup data for control transfers */
  54 } __attribute__((packed));
  55
  56 #define QTD_STS_ACTIVE     (1 << 31)  /* enable execution of transaction */
  57 #define QTD_STS_HALTED     (1 << 30)  /* transfer halted */
  58 #define QTD_STS_DBE        (1 << 29)  /* data buffer error */
  59 #define QTD_STS_BABBLE     (1 << 28)  /* babble detected */
  60 #define QTD_STS_RCE        (1 << 27)  /* retry count exceeded */
  61 #define QTD_STS_LAST_PKT   (1 << 26)  /* set Last Packet Flag in WUSB header */
  62 #define QTD_STS_INACTIVE   (1 << 25)  /* queue set is marked inactive */
  63 #define QTD_STS_IALT_VALID (1 << 23)                          /* iAlt field is valid */
  64 #define QTD_STS_IALT(i)    (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */
  65 #define QTD_STS_LEN(l)     ((l) << 0) /* transfer length */
  66 #define QTD_STS_TO_LEN(s)  ((s) & 0x000fffff)
  67
  68 #define QTD_OPT_IOC      (1 << 1) /* page_list_ptr points to buffer directly */
  69 #define QTD_OPT_SMALL    (1 << 0) /* interrupt on complete */
  70
  71 /**
  72  * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD)
  73  *
  74  * This describes the data and other parameters for an isochronous
  75  * transfer.
  76  *
  77  * [WHCI] section 3.2.5
  78  */
  79 struct whc_itd {
  80         __le16 presentation_time;    /*< presentation time for OUT transfers */
  81         __u8   num_segments;         /*< number of data segments in segment list */
  82         __u8   status;               /*< command execution status */
  83         __le32 options;              /*< misc transfer options */
  84         __le64 page_list_ptr;        /*< physical pointer to data buffer page list */
  85         __le64 seg_list_ptr;         /*< physical pointer to segment list */
  86 } __attribute__((packed));
  87
  88 #define ITD_STS_ACTIVE   (1 << 7) /* enable execution of transaction */
  89 #define ITD_STS_DBE      (1 << 5) /* data buffer error */
  90 #define ITD_STS_BABBLE   (1 << 4) /* babble detected */
  91 #define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */
  92
  93 #define ITD_OPT_IOC      (1 << 1) /* interrupt on complete */
  94 #define ITD_OPT_SMALL    (1 << 0) /* page_list_ptr points to buffer directly */
  95
  96 /**
  97  * Page list entry.
  98  *
  99  * A TD's page list must contain sufficient page list entries for the
 100  * total data length in the TD.
 101  *
 102  * [WHCI] section 3.2.4.3
 103  */
 104 struct whc_page_list_entry {
 105         __le64 buf_ptr; /*< physical pointer to buffer */
 106 } __attribute__((packed));
 107
 108 /**
 109  * struct whc_seg_list_entry - Segment list entry.
 110  *
 111  * Describes a portion of the data buffer described in the containing
 112  * qTD's page list.
 113  *
 114  * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr
 115  *           + qtd->seg_list_ptr[seg].offset;
 116  *
 117  * Segments can't cross page boundries.
 118  *
 119  * [WHCI] section 3.2.5.5
 120  */
 121 struct whc_seg_list_entry {
 122         __le16 len;    /*< segment length */
 123         __u8   idx;    /*< index into page list */
 124         __u8   status; /*< segment status */
 125         __le16 offset; /*< 12 bit offset into page */
 126 } __attribute__((packed));
 127
 128 /**
 129  * struct whc_qhead - endpoint and status information for a qset.
 130  *
 131  * [WHCI] section 3.2.6
 132  */
 133 struct whc_qhead {
 134         __le64 link; /*< next qset in list */
 135         __le32 info1;
 136         __le32 info2;
 137         __le32 info3;
 138         __le16 status;
 139         __le16 err_count;  /*< transaction error count */
 140         __le32 cur_window;
 141         __le32 scratch[3]; /*< h/w scratch area */
 142         union {
 143                 struct whc_qtd qtd;
 144                 struct whc_itd itd;
 145         } overlay;
 146 } __attribute__((packed));
 147
 148 #define QH_LINK_PTR_MASK (~0x03Full)
 149 #define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK)
 150 #define QH_LINK_IQS      (1 << 4) /* isochronous queue set */
 151 #define QH_LINK_NTDS(n)  (((n) - 1) << 1) /* number of TDs in queue set */
 152 #define QH_LINK_T        (1 << 0) /* last queue set in periodic schedule list */
 153
 154 #define QH_INFO1_EP(e)           ((e) << 0)  /* endpoint number */
 155 #define QH_INFO1_DIR_IN          (1 << 4)    /* IN transfer */
 156 #define QH_INFO1_DIR_OUT         (0 << 4)    /* OUT transfer */
 157 #define QH_INFO1_TR_TYPE_CTRL    (0x0 << 5)  /* control transfer */
 158 #define QH_INFO1_TR_TYPE_ISOC    (0x1 << 5)  /* isochronous transfer */
 159 #define QH_INFO1_TR_TYPE_BULK    (0x2 << 5)  /* bulk transfer */
 160 #define QH_INFO1_TR_TYPE_INT     (0x3 << 5)  /* interrupt */
 161 #define QH_INFO1_TR_TYPE_LP_INT  (0x7 << 5)  /* low power interrupt */
 162 #define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8)  /* index into device info buffer */
 163 #define QH_INFO1_SET_INACTIVE    (1 << 15)   /* set inactive after transfer */
 164 #define QH_INFO1_MAX_PKT_LEN(l)  ((l) << 16) /* maximum packet length */
 165
 166 #define QH_INFO2_BURST(b)        ((b) << 0)  /* maximum burst length */
 167 #define QH_INFO2_DBP(p)          ((p) << 5)  /* data burst policy (see [WUSB] table 5-7) */
 168 #define QH_INFO2_MAX_COUNT(c)    ((c) << 8)  /* max isoc/int pkts per zone */
 169 #define QH_INFO2_RQS             (1 << 15)   /* reactivate queue set */
 170 #define QH_INFO2_MAX_RETRY(r)    ((r) << 16) /* maximum transaction retries */
 171 #define QH_INFO2_MAX_SEQ(s)      ((s) << 20) /* maximum sequence number */
 172 #define QH_INFO3_MAX_DELAY(d)    ((d) << 0)  /* maximum stream delay in 125 us units (isoc only) */
 173 #define QH_INFO3_INTERVAL(i)     ((i) << 16) /* segment interval in 125 us units (isoc only) */
 174
 175 #define QH_INFO3_TX_RATE_53_3    (0 << 24)
 176 #define QH_INFO3_TX_RATE_80      (1 << 24)
 177 #define QH_INFO3_TX_RATE_106_7   (2 << 24)
 178 #define QH_INFO3_TX_RATE_160     (3 << 24)
 179 #define QH_INFO3_TX_RATE_200     (4 << 24)
 180 #define QH_INFO3_TX_RATE_320     (5 << 24)
 181 #define QH_INFO3_TX_RATE_400     (6 << 24)
 182 #define QH_INFO3_TX_RATE_480     (7 << 24)
 183 #define QH_INFO3_TX_PWR(p)       ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */
 184
 185 #define QH_STATUS_FLOW_CTRL      (1 << 15)
 186 #define QH_STATUS_ICUR(i)        ((i) << 5)
 187 #define QH_STATUS_TO_ICUR(s)     (((s) >> 5) & 0x7)
 188 #define QH_STATUS_SEQ_MASK       0x1f
 189
 190 /**
 191  * usb_pipe_to_qh_type - USB core pipe type to QH transfer type
 192  *
 193  * Returns the QH type field for a USB core pipe type.
 194  */
 195 static inline unsigned usb_pipe_to_qh_type(unsigned pipe)
 196 {
 197         static const unsigned type[] = {
 198                 [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC,
 199                 [PIPE_INTERRUPT]   = QH_INFO1_TR_TYPE_INT,
 200                 [PIPE_CONTROL]     = QH_INFO1_TR_TYPE_CTRL,
 201                 [PIPE_BULK]        = QH_INFO1_TR_TYPE_BULK,
 202         };
 203         return type[usb_pipetype(pipe)];
 204 }
 205
 206 /**
 207  * Maxiumum number of TDs in a qset.
 208  */
 209 #define WHCI_QSET_TD_MAX 8
 210
 211 /**
 212  * struct whc_qset - WUSB data transfers to a specific endpoint
 213  * @qh: the QHead of this qset
 214  * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt
 215  * transfers)
 216  * @itd: up to 8 iTDs (for qsets for isochronous transfers)
 217  * @qset_dma: DMA address for this qset
 218  * @whc: WHCI HC this qset is for
 219  * @ep: endpoint
 220  * @stds: list of sTDs queued to this qset
 221  * @ntds: number of qTDs queued (not necessarily the same as nTDs
 222  * field in the QH)
 223  * @td_start: index of the first qTD in the list
 224  * @td_end: index of next free qTD in the list (provided
 225  *          ntds < WHCI_QSET_TD_MAX)
 226  *
 227  * Queue Sets (qsets) are added to the asynchronous schedule list
 228  * (ASL) or the periodic zone list (PZL).
 229  *
 230  * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate).
 231  * Each TD may refer to at most 1 MiB of data. If a single transfer
 232  * has > 8MiB of data, TDs can be reused as they are completed since
 233  * the TD list is used as a circular buffer.  Similarly, several
 234  * (smaller) transfers may be queued in a qset.
 235  *
 236  * WHCI controllers may cache portions of the qsets in the ASL and
 237  * PZL, requiring the WHCD to inform the WHC that the lists have been
 238  * updated (fields changed or qsets inserted or removed).  For safe
 239  * insertion and removal of qsets from the lists the schedule must be
 240  * stopped to avoid races in updating the QH link pointers.
 241  *
 242  * Since the HC is free to execute qsets in any order, all transfers
 243  * to an endpoint should use the same qset to ensure transfers are
 244  * executed in the order they're submitted.
 245  *
 246  * [WHCI] section 3.2.3
 247  */
 248 struct whc_qset {
 249         struct whc_qhead qh;
 250         union {
 251                 struct whc_qtd qtd[WHCI_QSET_TD_MAX];
 252                 struct whc_itd itd[WHCI_QSET_TD_MAX];
 253         };
 254
 255         /* private data for WHCD */
 256         dma_addr_t qset_dma;
 257         struct whc *whc;
 258         struct usb_host_endpoint *ep;
 259         struct list_head stds;
 260         int ntds;
 261         int td_start;
 262         int td_end;
 263         struct list_head list_node;
 264         unsigned in_sw_list:1;
 265         unsigned in_hw_list:1;
 266         unsigned remove:1;
 267         unsigned reset:1;
 268         struct urb *pause_after_urb;
 269         struct completion remove_complete;
 270         int max_burst;
 271         int max_seq;
 272 };
 273
 274 static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target)
 275 {
 276         if (target)
 277                 *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target);
 278         else
 279                 *ptr = QH_LINK_T;
 280 }
 281
 282 /**
 283  * struct di_buf_entry - Device Information (DI) buffer entry.
 284  *
 285  * There's one of these per connected device.
 286  */
 287 struct di_buf_entry {
 288         __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */
 289         __le32 addr_sec_info;        /*< addressing and security info */
 290         __le32 reserved[7];
 291 } __attribute__((packed));
 292
 293 #define WHC_DI_SECURE           (1 << 31)
 294 #define WHC_DI_DISABLE          (1 << 30)
 295 #define WHC_DI_KEY_IDX(k)       ((k) << 8)
 296 #define WHC_DI_KEY_IDX_MASK     0x0000ff00
 297 #define WHC_DI_DEV_ADDR(a)      ((a) << 0)
 298 #define WHC_DI_DEV_ADDR_MASK    0x000000ff
 299
 300 /**
 301  * struct dn_buf_entry - Device Notification (DN) buffer entry.
 302  *
 303  * [WHCI] section 3.2.8
 304  */
 305 struct dn_buf_entry {
 306         __u8   msg_size;    /*< number of octets of valid DN data */
 307         __u8   reserved1;
 308         __u8   src_addr;    /*< source address */
 309         __u8   status;      /*< buffer entry status */
 310         __le32 tkid;        /*< TKID for source device, valid if secure bit is set */
 311         __u8   dn_data[56]; /*< up to 56 octets of DN data */
 312 } __attribute__((packed));
 313
 314 #define WHC_DN_STATUS_VALID  (1 << 7) /* buffer entry is valid */
 315 #define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */
 316
 317 #define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry))
 318
 319 /* The Add MMC IE WUSB Generic Command may take up to 256 bytes of
 320    data. [WHCI] section 2.4.7. */
 321 #define WHC_GEN_CMD_DATA_LEN 256
 322
 323 /*
 324  * HC registers.
 325  *
 326  * [WHCI] section 2.4
 327  */
 328
 329 #define WHCIVERSION          0x00
 330
 331 #define WHCSPARAMS           0x04
 332 #  define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff)
 333 #  define WHCSPARAMS_TO_N_KEYS(p)    (((p) >> 8) & 0xff)
 334 #  define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f)
 335
 336 #define WUSBCMD              0x08
 337 #  define WUSBCMD_BCID(b)            ((b) << 16)
 338 #  define WUSBCMD_BCID_MASK          (0xff << 16)
 339 #  define WUSBCMD_ASYNC_QSET_RM      (1 << 12)
 340 #  define WUSBCMD_PERIODIC_QSET_RM   (1 << 11)
 341 #  define WUSBCMD_WUSBSI(s)          ((s) << 8)
 342 #  define WUSBCMD_WUSBSI_MASK        (0x7 << 8)
 343 #  define WUSBCMD_ASYNC_SYNCED_DB    (1 << 7)
 344 #  define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6)
 345 #  define WUSBCMD_ASYNC_UPDATED      (1 << 5)
 346 #  define WUSBCMD_PERIODIC_UPDATED   (1 << 4)
 347 #  define WUSBCMD_ASYNC_EN           (1 << 3)
 348 #  define WUSBCMD_PERIODIC_EN        (1 << 2)
 349 #  define WUSBCMD_WHCRESET           (1 << 1)
 350 #  define WUSBCMD_RUN                (1 << 0)
 351
 352 #define WUSBSTS              0x0c
 353 #  define WUSBSTS_ASYNC_SCHED             (1 << 15)
 354 #  define WUSBSTS_PERIODIC_SCHED          (1 << 14)
 355 #  define WUSBSTS_DNTS_SCHED              (1 << 13)
 356 #  define WUSBSTS_HCHALTED                (1 << 12)
 357 #  define WUSBSTS_GEN_CMD_DONE            (1 << 9)
 358 #  define WUSBSTS_CHAN_TIME_ROLLOVER      (1 << 8)
 359 #  define WUSBSTS_DNTS_OVERFLOW           (1 << 7)
 360 #  define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6)
 361 #  define WUSBSTS_HOST_ERR                (1 << 5)
 362 #  define WUSBSTS_ASYNC_SCHED_SYNCED      (1 << 4)
 363 #  define WUSBSTS_PERIODIC_SCHED_SYNCED   (1 << 3)
 364 #  define WUSBSTS_DNTS_INT                (1 << 2)
 365 #  define WUSBSTS_ERR_INT                 (1 << 1)
 366 #  define WUSBSTS_INT                     (1 << 0)
 367 #  define WUSBSTS_INT_MASK                0x3ff
 368
 369 #define WUSBINTR             0x10
 370 #  define WUSBINTR_GEN_CMD_DONE             (1 << 9)
 371 #  define WUSBINTR_CHAN_TIME_ROLLOVER       (1 << 8)
 372 #  define WUSBINTR_DNTS_OVERFLOW            (1 << 7)
 373 #  define WUSBINTR_BPST_ADJUSTMENT_CHANGED  (1 << 6)
 374 #  define WUSBINTR_HOST_ERR                 (1 << 5)
 375 #  define WUSBINTR_ASYNC_SCHED_SYNCED       (1 << 4)
 376 #  define WUSBINTR_PERIODIC_SCHED_SYNCED    (1 << 3)
 377 #  define WUSBINTR_DNTS_INT                 (1 << 2)
 378 #  define WUSBINTR_ERR_INT                  (1 << 1)
 379 #  define WUSBINTR_INT                      (1 << 0)
 380 #  define WUSBINTR_ALL 0x3ff
 381
 382 #define WUSBGENCMDSTS        0x14
 383 #  define WUSBGENCMDSTS_ACTIVE (1 << 31)
 384 #  define WUSBGENCMDSTS_ERROR  (1 << 24)
 385 #  define WUSBGENCMDSTS_IOC    (1 << 23)
 386 #  define WUSBGENCMDSTS_MMCIE_ADD 0x01
 387 #  define WUSBGENCMDSTS_MMCIE_RM  0x02
 388 #  define WUSBGENCMDSTS_SET_MAS   0x03
 389 #  define WUSBGENCMDSTS_CHAN_STOP 0x04
 390 #  define WUSBGENCMDSTS_RWP_EN    0x05
 391
 392 #define WUSBGENCMDPARAMS     0x18
 393 #define WUSBGENADDR          0x20
 394 #define WUSBASYNCLISTADDR    0x28
 395 #define WUSBDNTSBUFADDR      0x30
 396 #define WUSBDEVICEINFOADDR   0x38
 397
 398 #define WUSBSETSECKEYCMD     0x40
 399 #  define WUSBSETSECKEYCMD_SET    (1 << 31)
 400 #  define WUSBSETSECKEYCMD_ERASE  (1 << 30)
 401 #  define WUSBSETSECKEYCMD_GTK    (1 << 8)
 402 #  define WUSBSETSECKEYCMD_IDX(i) ((i) << 0)
 403
 404 #define WUSBTKID             0x44
 405 #define WUSBSECKEY           0x48
 406 #define WUSBPERIODICLISTBASE 0x58
 407 #define WUSBMASINDEX         0x60
 408
 409 #define WUSBDNTSCTRL         0x64
 410 #  define WUSBDNTSCTRL_ACTIVE      (1 << 31)
 411 #  define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8)
 412 #  define WUSBDNTSCTRL_SLOTS(s)    ((s) << 0)
 413
 414 #define WUSBTIME             0x68
 415 #  define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff
 416
 417 #define WUSBBPST             0x6c
 418 #define WUSBDIBUPDATED       0x70
 419
 420 #endif /* #ifndef _WHCI_WHCI_HC_H */