[ARM] pxa: update defconfig for Verdex Pro
[linux-2.6/verdex.git] / scripts / kconfig / Makefile
blob6d69c7ccdcc788519efc06297678cfc50f9082d0
1 # ===========================================================================
2 # Kernel configuration targets
3 # These targets are used from top-level makefile
5 PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
6 localmodconfig localyesconfig
8 ifdef KBUILD_KCONFIG
9 Kconfig := $(KBUILD_KCONFIG)
10 else
11 Kconfig := arch/$(SRCARCH)/Kconfig
12 endif
14 xconfig: $(obj)/qconf
15 $< $(Kconfig)
17 gconfig: $(obj)/gconf
18 $< $(Kconfig)
20 menuconfig: $(obj)/mconf
21 $< $(Kconfig)
23 config: $(obj)/conf
24 $< $(Kconfig)
26 oldconfig: $(obj)/conf
27 $< -o $(Kconfig)
29 silentoldconfig: $(obj)/conf
30 $< -s $(Kconfig)
32 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
33 $(Q)perl $< $(Kconfig) > .tmp.config
34 $(Q)if [ -f .config ]; then \
35 cmp -s .tmp.config .config || \
36 (mv -f .config .config.old.1; \
37 mv -f .tmp.config .config; \
38 $(obj)/conf -s $(Kconfig); \
39 mv -f .config.old.1 .config.old) \
40 else \
41 mv -f .tmp.config .config; \
42 $(obj)/conf -s $(Kconfig); \
44 $(Q)rm -f .tmp.config
46 localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
47 $(Q)perl $< $(Kconfig) > .tmp.config
48 $(Q)sed -i s/=m/=y/ .tmp.config
49 $(Q)if [ -f .config ]; then \
50 cmp -s .tmp.config .config || \
51 (mv -f .config .config.old.1; \
52 mv -f .tmp.config .config; \
53 $(obj)/conf -s $(Kconfig); \
54 mv -f .config.old.1 .config.old) \
55 else \
56 mv -f .tmp.config .config; \
57 $(obj)/conf -s $(Kconfig); \
59 $(Q)rm -f .tmp.config
61 # Create new linux.pot file
62 # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
63 # The symlink is used to repair a deficiency in arch/um
64 update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
65 $(Q)echo " GEN config"
66 $(Q)xgettext --default-domain=linux \
67 --add-comments --keyword=_ --keyword=N_ \
68 --from-code=UTF-8 \
69 --files-from=scripts/kconfig/POTFILES.in \
70 --output $(obj)/config.pot
71 $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
72 $(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
73 $(Q)(for i in `ls arch/*/Kconfig`; \
74 do \
75 echo " GEN $$i"; \
76 $(obj)/kxgettext $$i \
77 >> $(obj)/config.pot; \
78 done )
79 $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
80 --output $(obj)/linux.pot
81 $(Q)rm -f arch/um/Kconfig.arch
82 $(Q)rm -f $(obj)/config.pot
84 PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
86 randconfig: $(obj)/conf
87 $< -r $(Kconfig)
89 allyesconfig: $(obj)/conf
90 $< -y $(Kconfig)
92 allnoconfig: $(obj)/conf
93 $< -n $(Kconfig)
95 allmodconfig: $(obj)/conf
96 $< -m $(Kconfig)
98 defconfig: $(obj)/conf
99 ifeq ($(KBUILD_DEFCONFIG),)
100 $< -d $(Kconfig)
101 else
102 @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
103 $(Q)$< -D arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
104 endif
106 %_defconfig: $(obj)/conf
107 $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig)
109 # Help text used by make help
110 help:
111 @echo ' config - Update current config utilising a line-oriented program'
112 @echo ' menuconfig - Update current config utilising a menu based program'
113 @echo ' xconfig - Update current config utilising a QT based front-end'
114 @echo ' gconfig - Update current config utilising a GTK based front-end'
115 @echo ' oldconfig - Update current config utilising a provided .config as base'
116 @echo ' localmodconfig - Update current config disabling modules not loaded'
117 @echo ' localyesconfig - Update current config converting local mods to core'
118 @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
119 @echo ' randconfig - New config with random answer to all options'
120 @echo ' defconfig - New config with default answer to all options'
121 @echo ' allmodconfig - New config selecting modules when possible'
122 @echo ' allyesconfig - New config where all options are accepted with yes'
123 @echo ' allnoconfig - New config where all options are answered with no'
125 # lxdialog stuff
126 check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
128 # Use recursively expanded variables so we do not call gcc unless
129 # we really need to do so. (Do not call gcc as part of make mrproper)
130 HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
131 HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
133 HOST_EXTRACFLAGS += -DLOCALE
136 # ===========================================================================
137 # Shared Makefile for the various kconfig executables:
138 # conf: Used for defconfig, oldconfig and related targets
139 # mconf: Used for the menuconfig target
140 # Utilizes the lxdialog package
141 # qconf: Used for the xconfig target
142 # Based on QT which needs to be installed to compile it
143 # gconf: Used for the gconfig target
144 # Based on GTK which needs to be installed to compile it
145 # object files used by all kconfig flavours
147 lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
148 lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
150 conf-objs := conf.o zconf.tab.o
151 mconf-objs := mconf.o zconf.tab.o $(lxdialog)
152 kxgettext-objs := kxgettext.o zconf.tab.o
154 hostprogs-y := conf qconf gconf kxgettext
156 ifeq ($(MAKECMDGOALS),menuconfig)
157 hostprogs-y += mconf
158 endif
160 ifeq ($(MAKECMDGOALS),xconfig)
161 qconf-target := 1
162 endif
163 ifeq ($(MAKECMDGOALS),gconfig)
164 gconf-target := 1
165 endif
168 ifeq ($(qconf-target),1)
169 qconf-cxxobjs := qconf.o
170 qconf-objs := kconfig_load.o zconf.tab.o
171 endif
173 ifeq ($(gconf-target),1)
174 gconf-objs := gconf.o kconfig_load.o zconf.tab.o
175 endif
177 clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
178 .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
179 clean-files += mconf qconf gconf
180 clean-files += config.pot linux.pot
182 # Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
183 PHONY += $(obj)/dochecklxdialog
184 $(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
185 $(obj)/dochecklxdialog:
186 $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES)
188 always := dochecklxdialog
190 # Add environment specific flags
191 HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
193 # generated files seem to need this to find local include files
194 HOSTCFLAGS_lex.zconf.o := -I$(src)
195 HOSTCFLAGS_zconf.tab.o := -I$(src)
197 HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
198 HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
200 HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
201 HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
202 -D LKC_DIRECT_LINK
204 $(obj)/qconf.o: $(obj)/.tmp_qtcheck
206 ifeq ($(qconf-target),1)
207 $(obj)/.tmp_qtcheck: $(src)/Makefile
208 -include $(obj)/.tmp_qtcheck
210 # QT needs some extra effort...
211 $(obj)/.tmp_qtcheck:
212 @set -e; echo " CHECK qt"; dir=""; pkg=""; \
213 pkg-config --exists qt 2> /dev/null && pkg=qt; \
214 pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
215 if [ -n "$$pkg" ]; then \
216 cflags="\$$(shell pkg-config $$pkg --cflags)"; \
217 libs="\$$(shell pkg-config $$pkg --libs)"; \
218 moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
219 dir="$$(pkg-config $$pkg --variable=prefix)"; \
220 else \
221 for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
222 if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
223 done; \
224 if [ -z "$$dir" ]; then \
225 echo "*"; \
226 echo "* Unable to find the QT3 installation. Please make sure that"; \
227 echo "* the QT3 development package is correctly installed and"; \
228 echo "* either install pkg-config or set the QTDIR environment"; \
229 echo "* variable to the correct location."; \
230 echo "*"; \
231 false; \
232 fi; \
233 libpath=$$dir/lib; lib=qt; osdir=""; \
234 $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
235 osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
236 test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
237 test -f $$libpath/libqt-mt.so && lib=qt-mt; \
238 cflags="-I$$dir/include"; \
239 libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
240 moc="$$dir/bin/moc"; \
241 fi; \
242 if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
243 echo "*"; \
244 echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
245 echo "*"; \
246 moc="/usr/bin/moc"; \
247 fi; \
248 echo "KC_QT_CFLAGS=$$cflags" > $@; \
249 echo "KC_QT_LIBS=$$libs" >> $@; \
250 echo "KC_QT_MOC=$$moc" >> $@
251 endif
253 $(obj)/gconf.o: $(obj)/.tmp_gtkcheck
255 ifeq ($(gconf-target),1)
256 -include $(obj)/.tmp_gtkcheck
258 # GTK needs some extra effort, too...
259 $(obj)/.tmp_gtkcheck:
260 @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
261 if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
262 touch $@; \
263 else \
264 echo "*"; \
265 echo "* GTK+ is present but version >= 2.0.0 is required."; \
266 echo "*"; \
267 false; \
268 fi \
269 else \
270 echo "*"; \
271 echo "* Unable to find the GTK+ installation. Please make sure that"; \
272 echo "* the GTK+ 2.0 development package is correctly installed..."; \
273 echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
274 echo "*"; \
275 false; \
277 endif
279 $(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
281 $(obj)/kconfig_load.o: $(obj)/lkc_defs.h
283 $(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
285 $(obj)/gconf.o: $(obj)/lkc_defs.h
287 $(obj)/%.moc: $(src)/%.h
288 $(KC_QT_MOC) -i $< -o $@
290 $(obj)/lkc_defs.h: $(src)/lkc_proto.h
291 sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
293 # Extract gconf menu items for I18N support
294 $(obj)/gconf.glade.h: $(obj)/gconf.glade
295 intltool-extract --type=gettext/glade $(obj)/gconf.glade
298 # The following requires flex/bison/gperf
299 # By default we use the _shipped versions, uncomment the following line if
300 # you are modifying the flex/bison src.
301 # LKC_GENPARSER := 1
303 ifdef LKC_GENPARSER
305 $(obj)/zconf.tab.c: $(src)/zconf.y
306 $(obj)/lex.zconf.c: $(src)/zconf.l
307 $(obj)/zconf.hash.c: $(src)/zconf.gperf
309 %.tab.c: %.y
310 bison -l -b $* -p $(notdir $*) $<
311 cp $@ $@_shipped
313 lex.%.c: %.l
314 flex -L -P$(notdir $*) -o$@ $<
315 cp $@ $@_shipped
317 %.hash.c: %.gperf
318 gperf < $< > $@
319 cp $@ $@_shipped
321 endif