sound/aoa/soundbus/i2sbus/interface.h

   1 /*
   2  * i2sbus driver -- interface register definitions
   3  *
   4  * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
   5  *
   6  * GPL v2, can be found in COPYING.
   7  */
   8 #ifndef __I2SBUS_INTERFACE_H
   9 #define __I2SBUS_INTERFACE_H
  10
  11 /* i2s bus control registers, at least what we know about them */
  12
  13 #define __PAD(m,n) u8 __pad##m[n]
  14 #define _PAD(line, n) __PAD(line, n)
  15 #define PAD(n) _PAD(__LINE__, (n))
  16 struct i2s_interface_regs {
  17         __le32 intr_ctl;        /* 0x00 */
  18         PAD(12);
  19         __le32 serial_format;   /* 0x10 */
  20         PAD(12);
  21         __le32 codec_msg_out;   /* 0x20 */
  22         PAD(12);
  23         __le32 codec_msg_in;    /* 0x30 */
  24         PAD(12);
  25         __le32 frame_count;     /* 0x40 */
  26         PAD(12);
  27         __le32 frame_match;     /* 0x50 */
  28         PAD(12);
  29         __le32 data_word_sizes; /* 0x60 */
  30         PAD(12);
  31         __le32 peak_level_sel;  /* 0x70 */
  32         PAD(12);
  33         __le32 peak_level_in0;  /* 0x80 */
  34         PAD(12);
  35         __le32 peak_level_in1;  /* 0x90 */
  36         PAD(12);
  37         /* total size: 0x100 bytes */
  38 }  __attribute__((__packed__));
  39
  40 /* interrupt register is just a bitfield with
  41  * interrupt enable and pending bits */
  42 #define I2S_REG_INTR_CTL                0x00
  43 #       define I2S_INT_FRAME_COUNT              (1<<31)
  44 #       define I2S_PENDING_FRAME_COUNT          (1<<30)
  45 #       define I2S_INT_MESSAGE_FLAG             (1<<29)
  46 #       define I2S_PENDING_MESSAGE_FLAG         (1<<28)
  47 #       define I2S_INT_NEW_PEAK                 (1<<27)
  48 #       define I2S_PENDING_NEW_PEAK             (1<<26)
  49 #       define I2S_INT_CLOCKS_STOPPED           (1<<25)
  50 #       define I2S_PENDING_CLOCKS_STOPPED       (1<<24)
  51 #       define I2S_INT_EXTERNAL_SYNC_ERROR      (1<<23)
  52 #       define I2S_PENDING_EXTERNAL_SYNC_ERROR  (1<<22)
  53 #       define I2S_INT_EXTERNAL_SYNC_OK         (1<<21)
  54 #       define I2S_PENDING_EXTERNAL_SYNC_OK     (1<<20)
  55 #       define I2S_INT_NEW_SAMPLE_RATE          (1<<19)
  56 #       define I2S_PENDING_NEW_SAMPLE_RATE      (1<<18)
  57 #       define I2S_INT_STATUS_FLAG              (1<<17)
  58 #       define I2S_PENDING_STATUS_FLAG          (1<<16)
  59
  60 /* serial format register is more interesting :)
  61  * It contains:
  62  *  - clock source
  63  *  - MClk divisor
  64  *  - SClk divisor
  65  *  - SClk master flag
  66  *  - serial format (sony, i2s 64x, i2s 32x, dav, silabs)
  67  *  - external sample frequency interrupt (don't understand)
  68  *  - external sample frequency
  69  */
  70 #define I2S_REG_SERIAL_FORMAT           0x10
  71 /* clock source. You get either 18.432, 45.1584 or 49.1520 MHz */
  72 #       define I2S_SF_CLOCK_SOURCE_SHIFT        30
  73 #       define I2S_SF_CLOCK_SOURCE_MASK         (3<<I2S_SF_CLOCK_SOURCE_SHIFT)
  74 #       define I2S_SF_CLOCK_SOURCE_18MHz        (0<<I2S_SF_CLOCK_SOURCE_SHIFT)
  75 #       define I2S_SF_CLOCK_SOURCE_45MHz        (1<<I2S_SF_CLOCK_SOURCE_SHIFT)
  76 #       define I2S_SF_CLOCK_SOURCE_49MHz        (2<<I2S_SF_CLOCK_SOURCE_SHIFT)
  77 /* also, let's define the exact clock speeds here, in Hz */
  78 #define I2S_CLOCK_SPEED_18MHz   18432000
  79 #define I2S_CLOCK_SPEED_45MHz   45158400
  80 #define I2S_CLOCK_SPEED_49MHz   49152000
  81 /* MClk is the clock that drives the codec, usually called its 'system clock'.
  82  * It is derived by taking only every 'divisor' tick of the clock.
  83  */
  84 #       define I2S_SF_MCLKDIV_SHIFT             24
  85 #       define I2S_SF_MCLKDIV_MASK              (0x1F<<I2S_SF_MCLKDIV_SHIFT)
  86 #       define I2S_SF_MCLKDIV_1                 (0x14<<I2S_SF_MCLKDIV_SHIFT)
  87 #       define I2S_SF_MCLKDIV_3                 (0x13<<I2S_SF_MCLKDIV_SHIFT)
  88 #       define I2S_SF_MCLKDIV_5                 (0x12<<I2S_SF_MCLKDIV_SHIFT)
  89 #       define I2S_SF_MCLKDIV_14                (0x0E<<I2S_SF_MCLKDIV_SHIFT)
  90 #       define I2S_SF_MCLKDIV_OTHER(div)        (((div/2-1)<<I2S_SF_MCLKDIV_SHIFT)&I2S_SF_MCLKDIV_MASK)
  91 static inline int i2s_sf_mclkdiv(int div, int *out)
  92 {
  93         int d;
  94
  95         switch(div) {
  96         case 1: *out |= I2S_SF_MCLKDIV_1; return 0;
  97         case 3: *out |= I2S_SF_MCLKDIV_3; return 0;
  98         case 5: *out |= I2S_SF_MCLKDIV_5; return 0;
  99         case 14: *out |= I2S_SF_MCLKDIV_14; return 0;
 100         default:
 101                 if (div%2) return -1;
 102                 d = div/2-1;
 103                 if (d == 0x14 || d == 0x13 || d == 0x12 || d == 0x0E)
 104                         return -1;
 105                 *out |= I2S_SF_MCLKDIV_OTHER(div);
 106                 return 0;
 107         }
 108 }
 109 /* SClk is the clock that drives the i2s wire bus. Note that it is
 110  * derived from the MClk above by taking only every 'divisor' tick
 111  * of MClk.
 112  */
 113 #       define I2S_SF_SCLKDIV_SHIFT             20
 114 #       define I2S_SF_SCLKDIV_MASK              (0xF<<I2S_SF_SCLKDIV_SHIFT)
 115 #       define I2S_SF_SCLKDIV_1                 (8<<I2S_SF_SCLKDIV_SHIFT)
 116 #       define I2S_SF_SCLKDIV_3                 (9<<I2S_SF_SCLKDIV_SHIFT)
 117 #       define I2S_SF_SCLKDIV_OTHER(div)        (((div/2-1)<<I2S_SF_SCLKDIV_SHIFT)&I2S_SF_SCLKDIV_MASK)
 118 static inline int i2s_sf_sclkdiv(int div, int *out)
 119 {
 120         int d;
 121
 122         switch(div) {
 123         case 1: *out |= I2S_SF_SCLKDIV_1; return 0;
 124         case 3: *out |= I2S_SF_SCLKDIV_3; return 0;
 125         default:
 126                 if (div%2) return -1;
 127                 d = div/2-1;
 128                 if (d == 8 || d == 9) return -1;
 129                 *out |= I2S_SF_SCLKDIV_OTHER(div);
 130                 return 0;
 131         }
 132 }
 133 #       define I2S_SF_SCLK_MASTER               (1<<19)
 134 /* serial format is the way the data is put to the i2s wire bus */
 135 #       define I2S_SF_SERIAL_FORMAT_SHIFT       16
 136 #       define I2S_SF_SERIAL_FORMAT_MASK        (7<<I2S_SF_SERIAL_FORMAT_SHIFT)
 137 #       define I2S_SF_SERIAL_FORMAT_SONY        (0<<I2S_SF_SERIAL_FORMAT_SHIFT)
 138 #       define I2S_SF_SERIAL_FORMAT_I2S_64X     (1<<I2S_SF_SERIAL_FORMAT_SHIFT)
 139 #       define I2S_SF_SERIAL_FORMAT_I2S_32X     (2<<I2S_SF_SERIAL_FORMAT_SHIFT)
 140 #       define I2S_SF_SERIAL_FORMAT_I2S_DAV     (4<<I2S_SF_SERIAL_FORMAT_SHIFT)
 141 #       define I2S_SF_SERIAL_FORMAT_I2S_SILABS  (5<<I2S_SF_SERIAL_FORMAT_SHIFT)
 142 /* unknown */
 143 #       define I2S_SF_EXT_SAMPLE_FREQ_INT_SHIFT 12
 144 #       define I2S_SF_EXT_SAMPLE_FREQ_INT_MASK  (0xF<<I2S_SF_SAMPLE_FREQ_INT_SHIFT)
 145 /* probably gives external frequency? */
 146 #       define I2S_SF_EXT_SAMPLE_FREQ_MASK      0xFFF
 147
 148 /* used to send codec messages, but how isn't clear */
 149 #define I2S_REG_CODEC_MSG_OUT           0x20
 150
 151 /* used to receive codec messages, but how isn't clear */
 152 #define I2S_REG_CODEC_MSG_IN            0x30
 153
 154 /* frame count reg isn't clear to me yet, but probably useful */
 155 #define I2S_REG_FRAME_COUNT             0x40
 156
 157 /* program to some value, and get interrupt if frame count reaches it */
 158 #define I2S_REG_FRAME_MATCH             0x50
 159
 160 /* this register describes how the bus transfers data */
 161 #define I2S_REG_DATA_WORD_SIZES         0x60
 162 /* number of interleaved input channels */
 163 #       define I2S_DWS_NUM_CHANNELS_IN_SHIFT    24
 164 #       define I2S_DWS_NUM_CHANNELS_IN_MASK     (0x1F<<I2S_DWS_NUM_CHANNELS_IN_SHIFT)
 165 /* word size of input data */
 166 #       define I2S_DWS_DATA_IN_SIZE_SHIFT       16
 167 #       define I2S_DWS_DATA_IN_16BIT            (0<<I2S_DWS_DATA_IN_SIZE_SHIFT)
 168 #       define I2S_DWS_DATA_IN_24BIT            (3<<I2S_DWS_DATA_IN_SIZE_SHIFT)
 169 /* number of interleaved output channels */
 170 #       define I2S_DWS_NUM_CHANNELS_OUT_SHIFT   8
 171 #       define I2S_DWS_NUM_CHANNELS_OUT_MASK    (0x1F<<I2S_DWS_NUM_CHANNELS_OUT_SHIFT)
 172 /* word size of output data */
 173 #       define I2S_DWS_DATA_OUT_SIZE_SHIFT      0
 174 #       define I2S_DWS_DATA_OUT_16BIT           (0<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
 175 #       define I2S_DWS_DATA_OUT_24BIT           (3<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
 176
 177
 178 /* unknown */
 179 #define I2S_REG_PEAK_LEVEL_SEL          0x70
 180
 181 /* unknown */
 182 #define I2S_REG_PEAK_LEVEL_IN0          0x80
 183
 184 /* unknown */
 185 #define I2S_REG_PEAK_LEVEL_IN1          0x90
 186
 187 #endif /* __I2SBUS_INTERFACE_H */