/spare/repo/netdev-2.6 branch 'master'
[linux-2.6/verdex.git] / include / asm-arm / arch-omap / board.h
blob95bd625480c13afd715fe45a70e0a40bb9c57cf0
1 /*
2 * linux/include/asm-arm/arch-omap/board.h
4 * Information structures for board-specific data
6 * Copyright (C) 2004 Nokia Corporation
7 * Written by Juha Yrjölä <juha.yrjola@nokia.com>
8 */
10 #ifndef _OMAP_BOARD_H
11 #define _OMAP_BOARD_H
13 #include <linux/config.h>
14 #include <linux/types.h>
16 /* Different peripheral ids */
17 #define OMAP_TAG_CLOCK 0x4f01
18 #define OMAP_TAG_MMC 0x4f02
19 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
20 #define OMAP_TAG_USB 0x4f04
21 #define OMAP_TAG_LCD 0x4f05
22 #define OMAP_TAG_GPIO_SWITCH 0x4f06
23 #define OMAP_TAG_UART 0x4f07
25 #define OMAP_TAG_BOOT_REASON 0x4f80
26 #define OMAP_TAG_FLASH_PART 0x4f81
28 struct omap_clock_config {
29 /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
30 u8 system_clock_type;
33 struct omap_mmc_config {
34 u8 mmc_blocks;
35 s16 mmc1_power_pin, mmc2_power_pin;
36 s16 mmc1_switch_pin, mmc2_switch_pin;
39 struct omap_serial_console_config {
40 u8 console_uart;
41 u32 console_speed;
44 struct omap_usb_config {
45 /* Configure drivers according to the connectors on your board:
46 * - "A" connector (rectagular)
47 * ... for host/OHCI use, set "register_host".
48 * - "B" connector (squarish) or "Mini-B"
49 * ... for device/gadget use, set "register_dev".
50 * - "Mini-AB" connector (very similar to Mini-B)
51 * ... for OTG use as device OR host, initialize "otg"
53 unsigned register_host:1;
54 unsigned register_dev:1;
55 u8 otg; /* port number, 1-based: usb1 == 2 */
57 u8 hmc_mode;
59 /* implicitly true if otg: host supports remote wakeup? */
60 u8 rwc;
62 /* signaling pins used to talk to transceiver on usbN:
63 * 0 == usbN unused
64 * 2 == usb0-only, using internal transceiver
65 * 3 == 3 wire bidirectional
66 * 4 == 4 wire bidirectional
67 * 6 == 6 wire unidirectional (or TLL)
69 u8 pins[3];
72 struct omap_lcd_config {
73 char panel_name[16];
74 char ctrl_name[16];
77 /* Cover:
78 * high -> closed
79 * low -> open
80 * Connection:
81 * high -> connected
82 * low -> disconnected
84 #define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000
85 #define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001
86 #define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001
87 #define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002
88 struct omap_gpio_switch_config {
89 char name[12];
90 u16 gpio;
91 int flags:4;
92 int type:4;
93 int key_code:24; /* Linux key code */
96 struct omap_flash_part_config {
97 char part_table[0];
100 struct omap_boot_reason_config {
101 char reason_str[12];
104 struct omap_uart_config {
105 /* Bit field of UARTs present; bit 0 --> UART1 */
106 unsigned int enabled_uarts;
109 struct omap_board_config_entry {
110 u16 tag;
111 u16 len;
112 u8 data[0];
115 struct omap_board_config_kernel {
116 u16 tag;
117 const void *data;
120 extern const void *__omap_get_config(u16 tag, size_t len, int nr);
122 #define omap_get_config(tag, type) \
123 ((const type *) __omap_get_config((tag), sizeof(type), 0))
124 #define omap_get_nr_config(tag, type, nr) \
125 ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
127 extern const void *omap_get_var_config(u16 tag, size_t *len);
129 extern struct omap_board_config_kernel *omap_board_config;
130 extern int omap_board_config_size;
132 #endif