include/asm-m68knommu/anchor.h

   1 /****************************************************************************/
   2
   3 /*
   4  *      anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
   5  *
   6  *      (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
   7  */
   8
   9 /****************************************************************************/
  10 #ifndef anchor_h
  11 #define anchor_h
  12 /****************************************************************************/
  13
  14 /*
  15  *      Define basic addressing info.
  16  */
  17 #if defined(CONFIG_M5407C3)
  18 #define COMEM_BASE      0xFFFF0000      /* Base of CO-MEM address space */
  19 #define COMEM_IRQ       25              /* IRQ of anchor part */
  20 #else
  21 #define COMEM_BASE      0x80000000      /* Base of CO-MEM address space */
  22 #define COMEM_IRQ       25              /* IRQ of anchor part */
  23 #endif
  24
  25 /****************************************************************************/
  26
  27 /*
  28  *      4-byte registers of CO-MEM, so adjust register addresses for
  29  *      easy access. Handy macro for word access too.
  30  */
  31 #define LREG(a)         ((a) >> 2)
  32 #define WREG(a)         ((a) >> 1)
  33
  34
  35 /*
  36  *      Define base addresses within CO-MEM Lite register address space.
  37  */
  38 #define COMEM_I2O       0x0000          /* I2O registers */
  39 #define COMEM_OPREGS    0x0400          /* Operation registers */
  40 #define COMEM_PCIBUS    0x2000          /* Direct access to PCI bus */
  41 #define COMEM_SHMEM     0x4000          /* Shared memory region */
  42
  43 #define COMEM_SHMEMSIZE 0x4000          /* Size of shared memory */
  44
  45
  46 /*
  47  *      Define CO-MEM Registers.
  48  */
  49 #define COMEM_I2OHISR   0x0030          /* I2O host interrupt status */
  50 #define COMEM_I2OHIMR   0x0034          /* I2O host interrupt mask */
  51 #define COMEM_I2OLISR   0x0038          /* I2O local interrupt status */
  52 #define COMEM_I2OLIMR   0x003c          /* I2O local interrupt mask */
  53 #define COMEM_IBFPFIFO  0x0040          /* I2O inbound free/post FIFO */
  54 #define COMEM_OBPFFIFO  0x0044          /* I2O outbound post/free FIFO */
  55 #define COMEM_IBPFFIFO  0x0048          /* I2O inbound post/free FIFO */
  56 #define COMEM_OBFPFIFO  0x004c          /* I2O outbound free/post FIFO */
  57
  58 #define COMEM_DAHBASE   0x0460          /* Direct access base address */
  59
  60 #define COMEM_NVCMD     0x04a0          /* I2C serial command */
  61 #define COMEM_NVREAD    0x04a4          /* I2C serial read */
  62 #define COMEM_NVSTAT    0x04a8          /* I2C status */
  63
  64 #define COMEM_DMALBASE  0x04b0          /* DMA local base address */
  65 #define COMEM_DMAHBASE  0x04b4          /* DMA host base address */
  66 #define COMEM_DMASIZE   0x04b8          /* DMA size */
  67 #define COMEM_DMACTL    0x04bc          /* DMA control */
  68
  69 #define COMEM_HCTL      0x04e0          /* Host control */
  70 #define COMEM_HINT      0x04e4          /* Host interrupt control/status */
  71 #define COMEM_HLDATA    0x04e8          /* Host to local data mailbox */
  72 #define COMEM_LINT      0x04f4          /* Local interrupt contole status */
  73 #define COMEM_LHDATA    0x04f8          /* Local to host data mailbox */
  74
  75 #define COMEM_LBUSCFG   0x04fc          /* Local bus configuration */
  76
  77
  78 /*
  79  *      Commands and flags for use with Direct Access Register.
  80  */
  81 #define COMEM_DA_IACK   0x00000000      /* Interrupt acknowledge (read) */
  82 #define COMEM_DA_SPCL   0x00000010      /* Special cycle (write) */
  83 #define COMEM_DA_MEMRD  0x00000004      /* Memory read cycle */
  84 #define COMEM_DA_MEMWR  0x00000004      /* Memory write cycle */
  85 #define COMEM_DA_IORD   0x00000002      /* I/O read cycle */
  86 #define COMEM_DA_IOWR   0x00000002      /* I/O write cycle */
  87 #define COMEM_DA_CFGRD  0x00000006      /* Configuration read cycle */
  88 #define COMEM_DA_CFGWR  0x00000006      /* Configuration write cycle */
  89
  90 #define COMEM_DA_ADDR(a)        ((a) & 0xffffe000)
  91
  92 #define COMEM_DA_OFFSET(a)      ((a) & 0x00001fff)
  93
  94
  95 /*
  96  *      The PCI bus will be limited in what slots will actually be used.
  97  *      Define valid device numbers for different boards.
  98  */
  99 #if defined(CONFIG_M5407C3)
 100 #define COMEM_MINDEV    14              /* Minimum valid DEVICE */
 101 #define COMEM_MAXDEV    14              /* Maximum valid DEVICE */
 102 #define COMEM_BRIDGEDEV 15              /* Slot bridge is in */
 103 #else
 104 #define COMEM_MINDEV    0               /* Minimum valid DEVICE */
 105 #define COMEM_MAXDEV    3               /* Maximum valid DEVICE */
 106 #endif
 107
 108 #define COMEM_MAXPCI    (COMEM_MAXDEV+1)        /* Maximum PCI devices */
 109
 110
 111 /****************************************************************************/
 112 #endif  /* anchor_h */