IB/mthca: Query port fix
[linux-2.6/verdex.git] / include / rxrpc / packet.h
blob1447f0aaa0ebc2e5e8d95fafb58483edf6d35c8d
1 /* packet.h: Rx packet layout and definitions
3 * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #ifndef _LINUX_RXRPC_PACKET_H
13 #define _LINUX_RXRPC_PACKET_H
15 #include <rxrpc/types.h>
17 #define RXRPC_IPUDP_SIZE 28
18 extern size_t RXRPC_MAX_PACKET_SIZE;
19 #define RXRPC_MAX_PACKET_DATA_SIZE (RXRPC_MAX_PACKET_SIZE - sizeof(struct rxrpc_header))
20 #define RXRPC_LOCAL_PACKET_SIZE RXRPC_MAX_PACKET_SIZE
21 #define RXRPC_REMOTE_PACKET_SIZE (576 - RXRPC_IPUDP_SIZE)
23 /*****************************************************************************/
25 * on-the-wire Rx packet header
26 * - all multibyte fields should be in network byte order
28 struct rxrpc_header
30 __be32 epoch; /* client boot timestamp */
32 __be32 cid; /* connection and channel ID */
33 #define RXRPC_MAXCALLS 4 /* max active calls per conn */
34 #define RXRPC_CHANNELMASK (RXRPC_MAXCALLS-1) /* mask for channel ID */
35 #define RXRPC_CIDMASK (~RXRPC_CHANNELMASK) /* mask for connection ID */
36 #define RXRPC_CIDSHIFT 2 /* shift for connection ID */
38 __be32 callNumber; /* call ID (0 for connection-level packets) */
39 #define RXRPC_PROCESS_MAXCALLS (1<<2) /* maximum number of active calls per conn (power of 2) */
41 __be32 seq; /* sequence number of pkt in call stream */
42 __be32 serial; /* serial number of pkt sent to network */
44 uint8_t type; /* packet type */
45 #define RXRPC_PACKET_TYPE_DATA 1 /* data */
46 #define RXRPC_PACKET_TYPE_ACK 2 /* ACK */
47 #define RXRPC_PACKET_TYPE_BUSY 3 /* call reject */
48 #define RXRPC_PACKET_TYPE_ABORT 4 /* call/connection abort */
49 #define RXRPC_PACKET_TYPE_ACKALL 5 /* ACK all outstanding packets on call */
50 #define RXRPC_PACKET_TYPE_CHALLENGE 6 /* connection security challenge (SRVR->CLNT) */
51 #define RXRPC_PACKET_TYPE_RESPONSE 7 /* connection secutity response (CLNT->SRVR) */
52 #define RXRPC_PACKET_TYPE_DEBUG 8 /* debug info request */
53 #define RXRPC_N_PACKET_TYPES 9 /* number of packet types (incl type 0) */
55 uint8_t flags; /* packet flags */
56 #define RXRPC_CLIENT_INITIATED 0x01 /* signifies a packet generated by a client */
57 #define RXRPC_REQUEST_ACK 0x02 /* request an unconditional ACK of this packet */
58 #define RXRPC_LAST_PACKET 0x04 /* the last packet from this side for this call */
59 #define RXRPC_MORE_PACKETS 0x08 /* more packets to come */
60 #define RXRPC_JUMBO_PACKET 0x20 /* [DATA] this is a jumbo packet */
61 #define RXRPC_SLOW_START_OK 0x20 /* [ACK] slow start supported */
63 uint8_t userStatus; /* app-layer defined status */
64 uint8_t securityIndex; /* security protocol ID */
65 __be16 _rsvd; /* reserved (used by kerberos security as cksum) */
66 __be16 serviceId; /* service ID */
68 } __attribute__((packed));
70 #define __rxrpc_header_off(X) offsetof(struct rxrpc_header,X)
72 extern const char *rxrpc_pkts[];
74 /*****************************************************************************/
76 * jumbo packet secondary header
77 * - can be mapped to read header by:
78 * - new_serial = serial + 1
79 * - new_seq = seq + 1
80 * - new_flags = j_flags
81 * - new__rsvd = j__rsvd
82 * - duplicating all other fields
84 struct rxrpc_jumbo_header
86 uint8_t flags; /* packet flags (as per rxrpc_header) */
87 uint8_t pad;
88 __be16 _rsvd; /* reserved (used by kerberos security as cksum) */
91 #define RXRPC_JUMBO_DATALEN 1412 /* non-terminal jumbo packet data length */
93 /*****************************************************************************/
95 * on-the-wire Rx ACK packet data payload
96 * - all multibyte fields should be in network byte order
98 struct rxrpc_ackpacket
100 __be16 bufferSpace; /* number of packet buffers available */
101 __be16 maxSkew; /* diff between serno being ACK'd and highest serial no
102 * received */
103 __be32 firstPacket; /* sequence no of first ACK'd packet in attached list */
104 __be32 previousPacket; /* sequence no of previous packet received */
105 __be32 serial; /* serial no of packet that prompted this ACK */
107 uint8_t reason; /* reason for ACK */
108 #define RXRPC_ACK_REQUESTED 1 /* ACK was requested on packet */
109 #define RXRPC_ACK_DUPLICATE 2 /* duplicate packet received */
110 #define RXRPC_ACK_OUT_OF_SEQUENCE 3 /* out of sequence packet received */
111 #define RXRPC_ACK_EXCEEDS_WINDOW 4 /* packet received beyond end of ACK window */
112 #define RXRPC_ACK_NOSPACE 5 /* packet discarded due to lack of buffer space */
113 #define RXRPC_ACK_PING 6 /* keep alive ACK */
114 #define RXRPC_ACK_PING_RESPONSE 7 /* response to RXRPC_ACK_PING */
115 #define RXRPC_ACK_DELAY 8 /* nothing happened since received packet */
116 #define RXRPC_ACK_IDLE 9 /* ACK due to fully received ACK window */
118 uint8_t nAcks; /* number of ACKs */
119 #define RXRPC_MAXACKS 255
121 uint8_t acks[0]; /* list of ACK/NAKs */
122 #define RXRPC_ACK_TYPE_NACK 0
123 #define RXRPC_ACK_TYPE_ACK 1
125 } __attribute__((packed));
127 #endif /* _LINUX_RXRPC_PACKET_H */