arch/powerpc/platforms/pseries/rtasd.c

   1 /*
   2  * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version
   7  * 2 of the License, or (at your option) any later version.
   8  *
   9  * Communication to userspace based on kernel/printk.c
  10  */
  11
  12 #include <linux/types.h>
  13 #include <linux/errno.h>
  14 #include <linux/sched.h>
  15 #include <linux/kernel.h>
  16 #include <linux/poll.h>
  17 #include <linux/proc_fs.h>
  18 #include <linux/init.h>
  19 #include <linux/vmalloc.h>
  20 #include <linux/spinlock.h>
  21 #include <linux/cpu.h>
  22 #include <linux/delay.h>
  23
  24 #include <asm/uaccess.h>
  25 #include <asm/io.h>
  26 #include <asm/rtas.h>
  27 #include <asm/prom.h>
  28 #include <asm/nvram.h>
  29 #include <asm/atomic.h>
  30
  31 #if 0
  32 #define DEBUG(A...)     printk(KERN_ERR A)
  33 #else
  34 #define DEBUG(A...)
  35 #endif
  36
  37 static DEFINE_SPINLOCK(rtasd_log_lock);
  38
  39 DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
  40
  41 static char *rtas_log_buf;
  42 static unsigned long rtas_log_start;
  43 static unsigned long rtas_log_size;
  44
  45 static int surveillance_timeout = -1;
  46 static unsigned int rtas_event_scan_rate;
  47 static unsigned int rtas_error_log_max;
  48 static unsigned int rtas_error_log_buffer_max;
  49
  50 static int full_rtas_msgs = 0;
  51
  52 extern int no_logging;
  53
  54 volatile int error_log_cnt = 0;
  55
  56 /*
  57  * Since we use 32 bit RTAS, the physical address of this must be below
  58  * 4G or else bad things happen. Allocate this in the kernel data and
  59  * make it big enough.
  60  */
  61 static unsigned char logdata[RTAS_ERROR_LOG_MAX];
  62
  63 static int get_eventscan_parms(void);
  64
  65 static char *rtas_type[] = {
  66         "Unknown", "Retry", "TCE Error", "Internal Device Failure",
  67         "Timeout", "Data Parity", "Address Parity", "Cache Parity",
  68         "Address Invalid", "ECC Uncorrected", "ECC Corrupted",
  69 };
  70
  71 static char *rtas_event_type(int type)
  72 {
  73         if ((type > 0) && (type < 11))
  74                 return rtas_type[type];
  75
  76         switch (type) {
  77                 case RTAS_TYPE_EPOW:
  78                         return "EPOW";
  79                 case RTAS_TYPE_PLATFORM:
  80                         return "Platform Error";
  81                 case RTAS_TYPE_IO:
  82                         return "I/O Event";
  83                 case RTAS_TYPE_INFO:
  84                         return "Platform Information Event";
  85                 case RTAS_TYPE_DEALLOC:
  86                         return "Resource Deallocation Event";
  87                 case RTAS_TYPE_DUMP:
  88                         return "Dump Notification Event";
  89         }
  90
  91         return rtas_type[0];
  92 }
  93
  94 /* To see this info, grep RTAS /var/log/messages and each entry
  95  * will be collected together with obvious begin/end.
  96  * There will be a unique identifier on the begin and end lines.
  97  * This will persist across reboots.
  98  *
  99  * format of error logs returned from RTAS:
 100  * bytes        (size)  : contents
 101  * --------------------------------------------------------
 102  * 0-7          (8)     : rtas_error_log
 103  * 8-47         (40)    : extended info
 104  * 48-51        (4)     : vendor id
 105  * 52-1023 (vendor specific) : location code and debug data
 106  */
 107 static void printk_log_rtas(char *buf, int len)
 108 {
 109
 110         int i,j,n = 0;
 111         int perline = 16;
 112         char buffer[64];
 113         char * str = "RTAS event";
 114
 115         if (full_rtas_msgs) {
 116                 printk(RTAS_DEBUG "%d -------- %s begin --------\n",
 117                        error_log_cnt, str);
 118
 119                 /*
 120                  * Print perline bytes on each line, each line will start
 121                  * with RTAS and a changing number, so syslogd will
 122                  * print lines that are otherwise the same.  Separate every
 123                  * 4 bytes with a space.
 124                  */
 125                 for (i = 0; i < len; i++) {
 126                         j = i % perline;
 127                         if (j == 0) {
 128                                 memset(buffer, 0, sizeof(buffer));
 129                                 n = sprintf(buffer, "RTAS %d:", i/perline);
 130                         }
 131
 132                         if ((i % 4) == 0)
 133                                 n += sprintf(buffer+n, " ");
 134
 135                         n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]);
 136
 137                         if (j == (perline-1))
 138                                 printk(KERN_DEBUG "%s\n", buffer);
 139                 }
 140                 if ((i % perline) != 0)
 141                         printk(KERN_DEBUG "%s\n", buffer);
 142
 143                 printk(RTAS_DEBUG "%d -------- %s end ----------\n",
 144                        error_log_cnt, str);
 145         } else {
 146                 struct rtas_error_log *errlog = (struct rtas_error_log *)buf;
 147
 148                 printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n",
 149                        error_log_cnt, rtas_event_type(errlog->type),
 150                        errlog->severity);
 151         }
 152 }
 153
 154 static int log_rtas_len(char * buf)
 155 {
 156         int len;
 157         struct rtas_error_log *err;
 158
 159         /* rtas fixed header */
 160         len = 8;
 161         err = (struct rtas_error_log *)buf;
 162         if (err->extended_log_length) {
 163
 164                 /* extended header */
 165                 len += err->extended_log_length;
 166         }
 167
 168         if (rtas_error_log_max == 0) {
 169                 get_eventscan_parms();
 170         }
 171         if (len > rtas_error_log_max)
 172                 len = rtas_error_log_max;
 173
 174         return len;
 175 }
 176
 177 /*
 178  * First write to nvram, if fatal error, that is the only
 179  * place we log the info.  The error will be picked up
 180  * on the next reboot by rtasd.  If not fatal, run the
 181  * method for the type of error.  Currently, only RTAS
 182  * errors have methods implemented, but in the future
 183  * there might be a need to store data in nvram before a
 184  * call to panic().
 185  *
 186  * XXX We write to nvram periodically, to indicate error has
 187  * been written and sync'd, but there is a possibility
 188  * that if we don't shutdown correctly, a duplicate error
 189  * record will be created on next reboot.
 190  */
 191 void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
 192 {
 193         unsigned long offset;
 194         unsigned long s;
 195         int len = 0;
 196
 197         DEBUG("logging event\n");
 198         if (buf == NULL)
 199                 return;
 200
 201         spin_lock_irqsave(&rtasd_log_lock, s);
 202
 203         /* get length and increase count */
 204         switch (err_type & ERR_TYPE_MASK) {
 205         case ERR_TYPE_RTAS_LOG:
 206                 len = log_rtas_len(buf);
 207                 if (!(err_type & ERR_FLAG_BOOT))
 208                         error_log_cnt++;
 209                 break;
 210         case ERR_TYPE_KERNEL_PANIC:
 211         default:
 212                 spin_unlock_irqrestore(&rtasd_log_lock, s);
 213                 return;
 214         }
 215
 216         /* Write error to NVRAM */
 217         if (!no_logging && !(err_type & ERR_FLAG_BOOT))
 218                 nvram_write_error_log(buf, len, err_type);
 219
 220         /*
 221          * rtas errors can occur during boot, and we do want to capture
 222          * those somewhere, even if nvram isn't ready (why not?), and even
 223          * if rtasd isn't ready. Put them into the boot log, at least.
 224          */
 225         if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG)
 226                 printk_log_rtas(buf, len);
 227
 228         /* Check to see if we need to or have stopped logging */
 229         if (fatal || no_logging) {
 230                 no_logging = 1;
 231                 spin_unlock_irqrestore(&rtasd_log_lock, s);
 232                 return;
 233         }
 234
 235         /* call type specific method for error */
 236         switch (err_type & ERR_TYPE_MASK) {
 237         case ERR_TYPE_RTAS_LOG:
 238                 offset = rtas_error_log_buffer_max *
 239                         ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK);
 240
 241                 /* First copy over sequence number */
 242                 memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int));
 243
 244                 /* Second copy over error log data */
 245                 offset += sizeof(int);
 246                 memcpy(&rtas_log_buf[offset], buf, len);
 247
 248                 if (rtas_log_size < LOG_NUMBER)
 249                         rtas_log_size += 1;
 250                 else
 251                         rtas_log_start += 1;
 252
 253                 spin_unlock_irqrestore(&rtasd_log_lock, s);
 254                 wake_up_interruptible(&rtas_log_wait);
 255                 break;
 256         case ERR_TYPE_KERNEL_PANIC:
 257         default:
 258                 spin_unlock_irqrestore(&rtasd_log_lock, s);
 259                 return;
 260         }
 261
 262 }
 263
 264
 265 static int rtas_log_open(struct inode * inode, struct file * file)
 266 {
 267         return 0;
 268 }
 269
 270 static int rtas_log_release(struct inode * inode, struct file * file)
 271 {
 272         return 0;
 273 }
 274
 275 /* This will check if all events are logged, if they are then, we
 276  * know that we can safely clear the events in NVRAM.
 277  * Next we'll sit and wait for something else to log.
 278  */
 279 static ssize_t rtas_log_read(struct file * file, char __user * buf,
 280                          size_t count, loff_t *ppos)
 281 {
 282         int error;
 283         char *tmp;
 284         unsigned long s;
 285         unsigned long offset;
 286
 287         if (!buf || count < rtas_error_log_buffer_max)
 288                 return -EINVAL;
 289
 290         count = rtas_error_log_buffer_max;
 291
 292         if (!access_ok(VERIFY_WRITE, buf, count))
 293                 return -EFAULT;
 294
 295         tmp = kmalloc(count, GFP_KERNEL);
 296         if (!tmp)
 297                 return -ENOMEM;
 298
 299
 300         spin_lock_irqsave(&rtasd_log_lock, s);
 301         /* if it's 0, then we know we got the last one (the one in NVRAM) */
 302         if (rtas_log_size == 0 && !no_logging)
 303                 nvram_clear_error_log();
 304         spin_unlock_irqrestore(&rtasd_log_lock, s);
 305
 306
 307         error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
 308         if (error)
 309                 goto out;
 310
 311         spin_lock_irqsave(&rtasd_log_lock, s);
 312         offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
 313         memcpy(tmp, &rtas_log_buf[offset], count);
 314
 315         rtas_log_start += 1;
 316         rtas_log_size -= 1;
 317         spin_unlock_irqrestore(&rtasd_log_lock, s);
 318
 319         error = copy_to_user(buf, tmp, count) ? -EFAULT : count;
 320 out:
 321         kfree(tmp);
 322         return error;
 323 }
 324
 325 static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
 326 {
 327         poll_wait(file, &rtas_log_wait, wait);
 328         if (rtas_log_size)
 329                 return POLLIN | POLLRDNORM;
 330         return 0;
 331 }
 332
 333 struct file_operations proc_rtas_log_operations = {
 334         .read =         rtas_log_read,
 335         .poll =         rtas_log_poll,
 336         .open =         rtas_log_open,
 337         .release =      rtas_log_release,
 338 };
 339
 340 static int enable_surveillance(int timeout)
 341 {
 342         int error;
 343
 344         error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout);
 345
 346         if (error == 0)
 347                 return 0;
 348
 349         if (error == -EINVAL) {
 350                 printk(KERN_INFO "rtasd: surveillance not supported\n");
 351                 return 0;
 352         }
 353
 354         printk(KERN_ERR "rtasd: could not update surveillance\n");
 355         return -1;
 356 }
 357
 358 static int get_eventscan_parms(void)
 359 {
 360         struct device_node *node;
 361         int *ip;
 362
 363         node = of_find_node_by_path("/rtas");
 364
 365         ip = (int *)get_property(node, "rtas-event-scan-rate", NULL);
 366         if (ip == NULL) {
 367                 printk(KERN_ERR "rtasd: no rtas-event-scan-rate\n");
 368                 of_node_put(node);
 369                 return -1;
 370         }
 371         rtas_event_scan_rate = *ip;
 372         DEBUG("rtas-event-scan-rate %d\n", rtas_event_scan_rate);
 373
 374         /* Make room for the sequence number */
 375         rtas_error_log_max = rtas_get_error_log_max();
 376         rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
 377
 378         of_node_put(node);
 379
 380         return 0;
 381 }
 382
 383 static void do_event_scan(int event_scan)
 384 {
 385         int error;
 386         do {
 387                 memset(logdata, 0, rtas_error_log_max);
 388                 error = rtas_call(event_scan, 4, 1, NULL,
 389                                   RTAS_EVENT_SCAN_ALL_EVENTS, 0,
 390                                   __pa(logdata), rtas_error_log_max);
 391                 if (error == -1) {
 392                         printk(KERN_ERR "event-scan failed\n");
 393                         break;
 394                 }
 395
 396                 if (error == 0)
 397                         pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0);
 398
 399         } while(error == 0);
 400 }
 401
 402 static void do_event_scan_all_cpus(long delay)
 403 {
 404         int cpu;
 405
 406         lock_cpu_hotplug();
 407         cpu = first_cpu(cpu_online_map);
 408         for (;;) {
 409                 set_cpus_allowed(current, cpumask_of_cpu(cpu));
 410                 do_event_scan(rtas_token("event-scan"));
 411                 set_cpus_allowed(current, CPU_MASK_ALL);
 412
 413                 /* Drop hotplug lock, and sleep for the specified delay */
 414                 unlock_cpu_hotplug();
 415                 msleep_interruptible(delay);
 416                 lock_cpu_hotplug();
 417
 418                 cpu = next_cpu(cpu, cpu_online_map);
 419                 if (cpu == NR_CPUS)
 420                         break;
 421         }
 422         unlock_cpu_hotplug();
 423 }
 424
 425 static int rtasd(void *unused)
 426 {
 427         unsigned int err_type;
 428         int event_scan = rtas_token("event-scan");
 429         int rc;
 430
 431         daemonize("rtasd");
 432
 433         if (event_scan == RTAS_UNKNOWN_SERVICE || get_eventscan_parms() == -1)
 434                 goto error;
 435
 436         rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER);
 437         if (!rtas_log_buf) {
 438                 printk(KERN_ERR "rtasd: no memory\n");
 439                 goto error;
 440         }
 441
 442         printk(KERN_INFO "RTAS daemon started\n");
 443
 444         DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate));
 445
 446         /* See if we have any error stored in NVRAM */
 447         memset(logdata, 0, rtas_error_log_max);
 448
 449         rc = nvram_read_error_log(logdata, rtas_error_log_max, &err_type);
 450
 451         /* We can use rtas_log_buf now */
 452         no_logging = 0;
 453
 454         if (!rc) {
 455                 if (err_type != ERR_FLAG_ALREADY_LOGGED) {
 456                         pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
 457                 }
 458         }
 459
 460         /* First pass. */
 461         do_event_scan_all_cpus(1000);
 462
 463         if (surveillance_timeout != -1) {
 464                 DEBUG("enabling surveillance\n");
 465                 enable_surveillance(surveillance_timeout);
 466                 DEBUG("surveillance enabled\n");
 467         }
 468
 469         /* Delay should be at least one second since some
 470          * machines have problems if we call event-scan too
 471          * quickly. */
 472         for (;;)
 473                 do_event_scan_all_cpus(30000/rtas_event_scan_rate);
 474
 475 error:
 476         /* Should delete proc entries */
 477         return -EINVAL;
 478 }
 479
 480 static int __init rtas_init(void)
 481 {
 482         struct proc_dir_entry *entry;
 483
 484         if (!platform_is_pseries())
 485                 return 0;
 486
 487         /* No RTAS */
 488         if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) {
 489                 printk(KERN_INFO "rtasd: no event-scan on system\n");
 490                 return 1;
 491         }
 492
 493         entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL);
 494         if (entry)
 495                 entry->proc_fops = &proc_rtas_log_operations;
 496         else
 497                 printk(KERN_ERR "Failed to create error_log proc entry\n");
 498
 499         if (kernel_thread(rtasd, NULL, CLONE_FS) < 0)
 500                 printk(KERN_ERR "Failed to start RTAS daemon\n");
 501
 502         return 0;
 503 }
 504
 505 static int __init surveillance_setup(char *str)
 506 {
 507         int i;
 508
 509         if (get_option(&str,&i)) {
 510                 if (i >= 0 && i <= 255)
 511                         surveillance_timeout = i;
 512         }
 513
 514         return 1;
 515 }
 516
 517 static int __init rtasmsgs_setup(char *str)
 518 {
 519         if (strcmp(str, "on") == 0)
 520                 full_rtas_msgs = 1;
 521         else if (strcmp(str, "off") == 0)
 522                 full_rtas_msgs = 0;
 523
 524         return 1;
 525 }
 526 __initcall(rtas_init);
 527 __setup("surveillance=", surveillance_setup);
 528 __setup("rtasmsgs=", rtasmsgs_setup);