2 * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
6 * see flexcop.c for copyright information.
21 static int flexcop_set_voltage(struct dvb_frontend
*fe
, fe_sec_voltage_t voltage
)
23 struct flexcop_device
*fc
= fe
->dvb
->priv
;
25 deb_tuner("polarity/voltage = %u\n", voltage
);
27 v
= fc
->read_ibi_reg(fc
, misc_204
);
30 v
.misc_204
.ACPI1_sig
= 1;
33 v
.misc_204
.ACPI1_sig
= 0;
34 v
.misc_204
.LNB_L_H_sig
= 0;
37 v
.misc_204
.ACPI1_sig
= 0;
38 v
.misc_204
.LNB_L_H_sig
= 1;
41 err("unknown SEC_VOLTAGE value");
44 return fc
->write_ibi_reg(fc
, misc_204
, v
);
47 static int flexcop_sleep(struct dvb_frontend
* fe
)
49 struct flexcop_device
*fc
= fe
->dvb
->priv
;
50 /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
53 return fc
->fe_sleep(fe
);
55 /* v.misc_204.ACPI3_sig = 1;
56 fc->write_ibi_reg(fc,misc_204,v);*/
61 static int flexcop_set_tone(struct dvb_frontend
*fe
, fe_sec_tone_mode_t tone
)
63 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
64 struct flexcop_device
*fc
= fe
->dvb
->priv
;
69 deb_tuner("tone = %u\n",tone
);
79 err("unknown SEC_TONE value");
83 v
.lnb_switch_freq_200
.LNB_CTLPrescaler_sig
= 1; /* divide by 2 */
85 v
.lnb_switch_freq_200
.LNB_CTLHighCount_sig
= ax
;
86 v
.lnb_switch_freq_200
.LNB_CTLLowCount_sig
= ax
== 0 ? 0x1ff : ax
;
88 return fc
->write_ibi_reg(fc
,lnb_switch_freq_200
,v
);
91 static void flexcop_diseqc_send_bit(struct dvb_frontend
* fe
, int data
)
93 flexcop_set_tone(fe
, SEC_TONE_ON
);
94 udelay(data
? 500 : 1000);
95 flexcop_set_tone(fe
, SEC_TONE_OFF
);
96 udelay(data
? 1000 : 500);
99 static void flexcop_diseqc_send_byte(struct dvb_frontend
* fe
, int data
)
103 for (i
= 7; i
>= 0; i
--) {
106 flexcop_diseqc_send_bit(fe
, d
);
109 flexcop_diseqc_send_bit(fe
, par
);
112 static int flexcop_send_diseqc_msg(struct dvb_frontend
* fe
, int len
, u8
*msg
, unsigned long burst
)
116 flexcop_set_tone(fe
, SEC_TONE_OFF
);
119 for (i
= 0; i
< len
; i
++)
120 flexcop_diseqc_send_byte(fe
,msg
[i
]);
126 flexcop_diseqc_send_byte(fe
, 0xff);
128 flexcop_set_tone(fe
, SEC_TONE_ON
);
130 flexcop_set_tone(fe
, SEC_TONE_OFF
);
137 static int flexcop_diseqc_send_master_cmd(struct dvb_frontend
* fe
, struct dvb_diseqc_master_cmd
* cmd
)
139 return flexcop_send_diseqc_msg(fe
, cmd
->msg_len
, cmd
->msg
, 0);
142 static int flexcop_diseqc_send_burst(struct dvb_frontend
* fe
, fe_sec_mini_cmd_t minicmd
)
144 return flexcop_send_diseqc_msg(fe
, 0, NULL
, minicmd
);
148 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend
* fe
, u32 srate
, u32 ratio
)
153 if (srate
< 1500000) { aclk
= 0xb7; bclk
= 0x47; }
154 else if (srate
< 3000000) { aclk
= 0xb7; bclk
= 0x4b; }
155 else if (srate
< 7000000) { aclk
= 0xb7; bclk
= 0x4f; }
156 else if (srate
< 14000000) { aclk
= 0xb7; bclk
= 0x53; }
157 else if (srate
< 30000000) { aclk
= 0xb6; bclk
= 0x53; }
158 else if (srate
< 45000000) { aclk
= 0xb4; bclk
= 0x51; }
160 stv0299_writereg (fe
, 0x13, aclk
);
161 stv0299_writereg (fe
, 0x14, bclk
);
162 stv0299_writereg (fe
, 0x1f, (ratio
>> 16) & 0xff);
163 stv0299_writereg (fe
, 0x20, (ratio
>> 8) & 0xff);
164 stv0299_writereg (fe
, 0x21, (ratio
) & 0xf0);
169 static int samsung_tbmu24112_pll_set(struct dvb_frontend
* fe
, struct i2c_adapter
*i2c
, struct dvb_frontend_parameters
* params
)
173 struct i2c_msg msg
= { .addr
= 0x61, .flags
= 0, .buf
= buf
, .len
= sizeof(buf
) };
175 div
= params
->frequency
/ 125;
177 buf
[0] = (div
>> 8) & 0x7f;
179 buf
[2] = 0x84; /* 0xC4 */
182 if (params
->frequency
< 1500000) buf
[3] |= 0x10;
184 if (i2c_transfer(i2c
, &msg
, 1) != 1)
189 static u8 samsung_tbmu24112_inittab
[] = {
234 static struct stv0299_config samsung_tbmu24112_config
= {
235 .demod_address
= 0x68,
236 .inittab
= samsung_tbmu24112_inittab
,
240 .lock_output
= STV0229_LOCKOUTPUT_LK
,
241 .volt13_op0_op1
= STV0299_VOLT13_OP1
,
243 .set_symbol_rate
= samsung_tbmu24112_set_symbol_rate
,
244 .pll_set
= samsung_tbmu24112_pll_set
,
248 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend
* fe
)
250 static u8 mt352_clock_config
[] = { 0x89, 0x18, 0x2d };
251 static u8 mt352_reset
[] = { 0x50, 0x80 };
252 static u8 mt352_adc_ctl_1_cfg
[] = { 0x8E, 0x40 };
253 static u8 mt352_agc_cfg
[] = { 0x67, 0x28, 0xa1 };
254 static u8 mt352_capt_range_cfg
[] = { 0x75, 0x32 };
256 mt352_write(fe
, mt352_clock_config
, sizeof(mt352_clock_config
));
258 mt352_write(fe
, mt352_reset
, sizeof(mt352_reset
));
259 mt352_write(fe
, mt352_adc_ctl_1_cfg
, sizeof(mt352_adc_ctl_1_cfg
));
261 mt352_write(fe
, mt352_agc_cfg
, sizeof(mt352_agc_cfg
));
262 mt352_write(fe
, mt352_capt_range_cfg
, sizeof(mt352_capt_range_cfg
));
267 static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend
* fe
, struct dvb_frontend_parameters
* params
, u8
* pllbuf
)
270 unsigned char bs
= 0;
272 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
273 div
= (((params
->frequency
+ 83333) * 3) / 500000) + IF_FREQUENCYx6
;
275 if (params
->frequency
>= 48000000 && params
->frequency
<= 154000000) bs
= 0x09;
276 if (params
->frequency
>= 161000000 && params
->frequency
<= 439000000) bs
= 0x0a;
277 if (params
->frequency
>= 447000000 && params
->frequency
<= 863000000) bs
= 0x08;
279 pllbuf
[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
280 pllbuf
[1] = div
>> 8;
281 pllbuf
[2] = div
& 0xff;
288 static struct mt352_config samsung_tdtc9251dh0_config
= {
289 .demod_address
= 0x0f,
290 .demod_init
= samsung_tdtc9251dh0_demod_init
,
291 .pll_set
= samsung_tdtc9251dh0_pll_set
,
294 static int flexcop_fe_request_firmware(struct dvb_frontend
* fe
, const struct firmware
**fw
, char* name
)
296 struct flexcop_device
*fc
= fe
->dvb
->priv
;
297 return request_firmware(fw
, name
, fc
->dev
);
300 static int lgdt3303_pll_set(struct dvb_frontend
* fe
,
301 struct dvb_frontend_parameters
* params
)
303 struct flexcop_device
*fc
= fe
->dvb
->priv
;
306 { .addr
= 0x61, .flags
= 0, .buf
= buf
, .len
= 4 };
309 dvb_pll_configure(&dvb_pll_tdvs_tua6034
,buf
, params
->frequency
, 0);
310 dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
311 __FUNCTION__
, msg
.addr
, buf
[0],buf
[1],buf
[2],buf
[3]);
312 if ((err
= i2c_transfer(&fc
->i2c_adap
, &msg
, 1)) != 1) {
313 printk(KERN_WARNING
"lgdt3303: %s error "
314 "(addr %02x <- %02x, err = %i)\n",
315 __FUNCTION__
, buf
[0], buf
[1], err
);
322 buf
[0] = 0x86 | 0x18;
325 if ((err
= i2c_transfer(&fc
->i2c_adap
, &msg
, 1)) != 1) {
326 printk(KERN_WARNING
"lgdt3303: %s error "
327 "(addr %02x <- %02x, err = %i)\n",
328 __FUNCTION__
, buf
[0], buf
[1], err
);
338 static struct lgdt330x_config air2pc_atsc_hd5000_config
= {
339 .demod_address
= 0x59,
340 .demod_chip
= LGDT3303
,
342 .pll_set
= lgdt3303_pll_set
,
343 .clock_polarity_flip
= 1,
346 static struct nxt2002_config samsung_tbmv_config
= {
347 .demod_address
= 0x0a,
348 .request_firmware
= flexcop_fe_request_firmware
,
351 static struct bcm3510_config air2pc_atsc_first_gen_config
= {
352 .demod_address
= 0x0f,
353 .request_firmware
= flexcop_fe_request_firmware
,
356 static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend
* fe
, struct dvb_frontend_parameters
* params
)
360 struct i2c_msg msg
= { .addr
= 0x61, .flags
= 0, .buf
= buf
, .len
= sizeof(buf
) };
361 struct flexcop_device
*fc
= fe
->dvb
->priv
;
363 div
= (params
->frequency
+ (125/2)) / 125;
365 buf
[0] = (div
>> 8) & 0x7f;
366 buf
[1] = (div
>> 0) & 0xff;
367 buf
[2] = 0x84 | ((div
>> 10) & 0x60);
370 if (params
->frequency
< 1550000)
373 if (i2c_transfer(&fc
->i2c_adap
, &msg
, 1) != 1)
378 static struct mt312_config skystar23_samsung_tbdu18132_config
= {
380 .demod_address
= 0x0e,
381 .pll_set
= skystar23_samsung_tbdu18132_pll_set
,
385 static u8 alps_tdee4_stv0297_inittab
[] = {
478 static struct stv0297_config alps_tdee4_stv0297_config
= {
479 .demod_address
= 0x1c,
480 .inittab
= alps_tdee4_stv0297_inittab
,
482 // .pll_set = alps_tdee4_stv0297_pll_set,
485 /* try to figure out the frontend, each card/box can have on of the following list */
486 int flexcop_frontend_init(struct flexcop_device
*fc
)
488 struct dvb_frontend_ops
*ops
;
490 /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
491 if ((fc
->fe
= stv0299_attach(&samsung_tbmu24112_config
, &fc
->i2c_adap
)) != NULL
) {
494 ops
->set_voltage
= flexcop_set_voltage
;
496 fc
->fe_sleep
= ops
->sleep
;
497 ops
->sleep
= flexcop_sleep
;
499 fc
->dev_type
= FC_SKY
;
500 info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config
.demod_address
);
502 /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
503 if ((fc
->fe
= mt352_attach(&samsung_tdtc9251dh0_config
, &fc
->i2c_adap
)) != NULL
) {
504 fc
->dev_type
= FC_AIR_DVB
;
505 info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config
.demod_address
);
507 /* try the air atsc 2nd generation (nxt2002) */
508 if ((fc
->fe
= nxt2002_attach(&samsung_tbmv_config
, &fc
->i2c_adap
)) != NULL
) {
509 fc
->dev_type
= FC_AIR_ATSC2
;
510 info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config
.demod_address
);
512 /* try the air atsc 3nd generation (lgdt3303) */
513 if ((fc
->fe
= lgdt330x_attach(&air2pc_atsc_hd5000_config
, &fc
->i2c_adap
)) != NULL
) {
514 fc
->dev_type
= FC_AIR_ATSC3
;
515 info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config
.demod_address
);
517 /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
518 if ((fc
->fe
= bcm3510_attach(&air2pc_atsc_first_gen_config
, &fc
->i2c_adap
)) != NULL
) {
519 fc
->dev_type
= FC_AIR_ATSC1
;
520 info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config
.demod_address
);
522 /* try the cable dvb (stv0297) */
523 if ((fc
->fe
= stv0297_attach(&alps_tdee4_stv0297_config
, &fc
->i2c_adap
)) != NULL
) {
524 fc
->dev_type
= FC_CABLE
;
525 info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config
.demod_address
);
527 /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
528 if ((fc
->fe
= vp310_attach(&skystar23_samsung_tbdu18132_config
, &fc
->i2c_adap
)) != NULL
) {
531 ops
->diseqc_send_master_cmd
= flexcop_diseqc_send_master_cmd
;
532 ops
->diseqc_send_burst
= flexcop_diseqc_send_burst
;
533 ops
->set_tone
= flexcop_set_tone
;
534 ops
->set_voltage
= flexcop_set_voltage
;
536 fc
->fe_sleep
= ops
->sleep
;
537 ops
->sleep
= flexcop_sleep
;
539 fc
->dev_type
= FC_SKY_OLD
;
540 info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config
.demod_address
);
543 if (fc
->fe
== NULL
) {
544 err("no frontend driver found for this B2C2/FlexCop adapter");
547 if (dvb_register_frontend(&fc
->dvb_adapter
, fc
->fe
)) {
548 err("frontend registration failed!");
550 if (ops
->release
!= NULL
)
551 ops
->release(fc
->fe
);
556 fc
->init_state
|= FC_STATE_FE_INIT
;
560 void flexcop_frontend_exit(struct flexcop_device
*fc
)
562 if (fc
->init_state
& FC_STATE_FE_INIT
)
563 dvb_unregister_frontend(fc
->fe
);
565 fc
->init_state
&= ~FC_STATE_FE_INIT
;