Merge branch 'master'

[linux-2.6/verdex.git] / arch / powerpc / kernel / machine_kexec_64.c

/*
 * machine_kexec.c - handle transition of Linux booting another kernel
 *
 * Copyright (C) 2004-2005, IBM Corp.
 *
 * Created by: Milton D Miller II
 *
 * This source code is licensed under the GNU General Public License,
 * Version 2.  See the file COPYING for more details.
 */


#include <linux/cpumask.h>
#include <linux/kexec.h>
#include <linux/smp.h>
#include <linux/thread_info.h>
#include <linux/errno.h>

#include <asm/page.h>
#include <asm/current.h>
#include <asm/machdep.h>
#include <asm/cacheflush.h>
#include <asm/paca.h>
#include <asm/mmu.h>
#include <asm/sections.h>       /* _end */
#include <asm/prom.h>
#include <asm/smp.h>

#define HASH_GROUP_SIZE 0x80    /* size of each hash group, asm/mmu.h */

/* Have this around till we move it into crash specific file */
note_buf_t crash_notes[NR_CPUS];

/* Dummy for now. Not sure if we need to have a crash shutdown in here
 * and if what it will achieve. Letting it be now to compile the code
 * in generic kexec environment
 */
void machine_crash_shutdown(struct pt_regs *regs)
{
        /* do nothing right now */
        /* smp_relase_cpus() if we want smp on panic kernel */
        /* cpu_irq_down to isolate us until we are ready */
}

int machine_kexec_prepare(struct kimage *image)
{
        int i;
        unsigned long begin, end;       /* limits of segment */
        unsigned long low, high;        /* limits of blocked memory range */
        struct device_node *node;
        unsigned long *basep;
        unsigned int *sizep;

        if (!ppc_md.hpte_clear_all)
                return -ENOENT;

        /*
         * Since we use the kernel fault handlers and paging code to
         * handle the virtual mode, we must make sure no destination
         * overlaps kernel static data or bss.
         */
        for (i = 0; i < image->nr_segments; i++)
                if (image->segment[i].mem < __pa(_end))
                        return -ETXTBSY;

        /*
         * For non-LPAR, we absolutely can not overwrite the mmu hash
         * table, since we are still using the bolted entries in it to
         * do the copy.  Check that here.
         *
         * It is safe if the end is below the start of the blocked
         * region (end <= low), or if the beginning is after the
         * end of the blocked region (begin >= high).  Use the
         * boolean identity !(a || b)  === (!a && !b).
         */
        if (htab_address) {
                low = __pa(htab_address);
                high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE;

                for (i = 0; i < image->nr_segments; i++) {
                        begin = image->segment[i].mem;
                        end = begin + image->segment[i].memsz;

                        if ((begin < high) && (end > low))
                                return -ETXTBSY;
                }
        }

        /* We also should not overwrite the tce tables */
        for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
                        node = of_find_node_by_type(node, "pci")) {
                basep = (unsigned long *)get_property(node, "linux,tce-base",
                                                        NULL);
                sizep = (unsigned int *)get_property(node, "linux,tce-size",
                                                        NULL);
                if (basep == NULL || sizep == NULL)
                        continue;

                low = *basep;
                high = low + (*sizep);

                for (i = 0; i < image->nr_segments; i++) {
                        begin = image->segment[i].mem;
                        end = begin + image->segment[i].memsz;

                        if ((begin < high) && (end > low))
                                return -ETXTBSY;
                }
        }

        return 0;
}

void machine_kexec_cleanup(struct kimage *image)
{
        /* we do nothing in prepare that needs to be undone */
}

#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE)

static void copy_segments(unsigned long ind)
{
        unsigned long entry;
        unsigned long *ptr;
        void *dest;
        void *addr;

        /*
         * We rely on kexec_load to create a lists that properly
         * initializes these pointers before they are used.
         * We will still crash if the list is wrong, but at least
         * the compiler will be quiet.
         */
        ptr = NULL;
        dest = NULL;

        for (entry = ind; !(entry & IND_DONE); entry = *ptr++) {
                addr = __va(entry & PAGE_MASK);

                switch (entry & IND_FLAGS) {
                case IND_DESTINATION:
                        dest = addr;
                        break;
                case IND_INDIRECTION:
                        ptr = addr;
                        break;
                case IND_SOURCE:
                        copy_page(dest, addr);
                        dest += PAGE_SIZE;
                }
        }
}

void kexec_copy_flush(struct kimage *image)
{
        long i, nr_segments = image->nr_segments;
        struct  kexec_segment ranges[KEXEC_SEGMENT_MAX];

        /* save the ranges on the stack to efficiently flush the icache */
        memcpy(ranges, image->segment, sizeof(ranges));

        /*
         * After this call we may not use anything allocated in dynamic
         * memory, including *image.
         *
         * Only globals and the stack are allowed.
         */
        copy_segments(image->head);

        /*
         * we need to clear the icache for all dest pages sometime,
         * including ones that were in place on the original copy
         */
        for (i = 0; i < nr_segments; i++)
                flush_icache_range(ranges[i].mem + KERNELBASE,
                                ranges[i].mem + KERNELBASE +
                                ranges[i].memsz);
}

#ifdef CONFIG_SMP

/* FIXME: we should schedule this function to be called on all cpus based
 * on calling the interrupts, but we would like to call it off irq level
 * so that the interrupt controller is clean.
 */
void kexec_smp_down(void *arg)
{
        if (ppc_md.kexec_cpu_down)
                ppc_md.kexec_cpu_down(0, 1);

        local_irq_disable();
        kexec_smp_wait();
        /* NOTREACHED */
}

static void kexec_prepare_cpus(void)
{
        int my_cpu, i, notified=-1;

        smp_call_function(kexec_smp_down, NULL, 0, /* wait */0);
        my_cpu = get_cpu();

        /* check the others cpus are now down (via paca hw cpu id == -1) */
        for (i=0; i < NR_CPUS; i++) {
                if (i == my_cpu)
                        continue;

                while (paca[i].hw_cpu_id != -1) {
                        barrier();
                        if (!cpu_possible(i)) {
                                printk("kexec: cpu %d hw_cpu_id %d is not"
                                                " possible, ignoring\n",
                                                i, paca[i].hw_cpu_id);
                                break;
                        }
                        if (!cpu_online(i)) {
                                /* Fixme: this can be spinning in
                                 * pSeries_secondary_wait with a paca
                                 * waiting for it to go online.
                                 */
                                printk("kexec: cpu %d hw_cpu_id %d is not"
                                                " online, ignoring\n",
                                                i, paca[i].hw_cpu_id);
                                break;
                        }
                        if (i != notified) {
                                printk( "kexec: waiting for cpu %d (physical"
                                                " %d) to go down\n",
                                                i, paca[i].hw_cpu_id);
                                notified = i;
                        }
                }
        }

        /* after we tell the others to go down */
        if (ppc_md.kexec_cpu_down)
                ppc_md.kexec_cpu_down(0, 0);

        put_cpu();

        local_irq_disable();
}

#else /* ! SMP */

static void kexec_prepare_cpus(void)
{
        /*
         * move the secondarys to us so that we can copy
         * the new kernel 0-0x100 safely
         *
         * do this if kexec in setup.c ?
         *
         * We need to release the cpus if we are ever going from an
         * UP to an SMP kernel.
         */
        smp_release_cpus();
        if (ppc_md.kexec_cpu_down)
                ppc_md.kexec_cpu_down(0, 0);
        local_irq_disable();
}

#endif /* SMP */

/*
 * kexec thread structure and stack.
 *
 * We need to make sure that this is 16384-byte aligned due to the
 * way process stacks are handled.  It also must be statically allocated
 * or allocated as part of the kimage, because everything else may be
 * overwritten when we copy the kexec image.  We piggyback on the
 * "init_task" linker section here to statically allocate a stack.
 *
 * We could use a smaller stack if we don't care about anything using
 * current, but that audit has not been performed.
 */
union thread_union kexec_stack
        __attribute__((__section__(".data.init_task"))) = { };

/* Our assembly helper, in kexec_stub.S */
extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
                                        void *image, void *control,
                                        void (*clear_all)(void)) ATTRIB_NORET;

/* too late to fail here */
void machine_kexec(struct kimage *image)
{

        /* prepare control code if any */

        /* shutdown other cpus into our wait loop and quiesce interrupts */
        kexec_prepare_cpus();

        /* switch to a staticly allocated stack.  Based on irq stack code.
         * XXX: the task struct will likely be invalid once we do the copy!
         */
        kexec_stack.thread_info.task = current_thread_info()->task;
        kexec_stack.thread_info.flags = 0;

        /* Some things are best done in assembly.  Finding globals with
         * a toc is easier in C, so pass in what we can.
         */
        kexec_sequence(&kexec_stack, image->start, image,
                        page_address(image->control_code_page),
                        ppc_md.hpte_clear_all);
        /* NOTREACHED */
}

/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base, htab_size, kernel_end;

static struct property htab_base_prop = {
        .name = "linux,htab-base",
        .length = sizeof(unsigned long),
        .value = (unsigned char *)&htab_base,
};

static struct property htab_size_prop = {
        .name = "linux,htab-size",
        .length = sizeof(unsigned long),
        .value = (unsigned char *)&htab_size,
};

static struct property kernel_end_prop = {
        .name = "linux,kernel-end",
        .length = sizeof(unsigned long),
        .value = (unsigned char *)&kernel_end,
};

static void __init export_htab_values(void)
{
        struct device_node *node;

        node = of_find_node_by_path("/chosen");
        if (!node)
                return;

        kernel_end = __pa(_end);
        prom_add_property(node, &kernel_end_prop);

        /* On machines with no htab htab_address is NULL */
        if (NULL == htab_address)
                goto out;

        htab_base = __pa(htab_address);
        prom_add_property(node, &htab_base_prop);

        htab_size = 1UL << ppc64_pft_size;
        prom_add_property(node, &htab_size_prop);

 out:
        of_node_put(node);
}

void __init kexec_setup(void)
{
        export_htab_values();
}