2 * IB700 Single Board Computer WDT driver
4 * (c) Copyright 2001 Charles Howes <chowes@vsol.net>
6 * Based on advantechwdt.c which is based on acquirewdt.c which
9 * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
11 * Based on acquirewdt.c which is based on wdt.c.
12 * Original copyright messages:
14 * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
15 * http://www.redhat.com
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
22 * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
23 * warranty for any of this software. This material is provided
24 * "AS-IS" and at no charge.
26 * (c) Copyright 1995 Alan Cox <alan@redhat.com>
28 * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
29 * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
30 * Added timeout module option to override default
34 #include <linux/config.h>
35 #include <linux/module.h>
36 #include <linux/types.h>
37 #include <linux/miscdevice.h>
38 #include <linux/watchdog.h>
39 #include <linux/ioport.h>
40 #include <linux/notifier.h>
42 #include <linux/reboot.h>
43 #include <linux/init.h>
44 #include <linux/spinlock.h>
45 #include <linux/moduleparam.h>
48 #include <asm/uaccess.h>
49 #include <asm/system.h>
51 static unsigned long ibwdt_is_open
;
52 static spinlock_t ibwdt_lock
;
53 static char expect_close
;
55 #define PFX "ib700wdt: "
59 * Watchdog Timer Configuration
61 * The function of the watchdog timer is to reset the system
62 * automatically and is defined at I/O port 0443H. To enable the
63 * watchdog timer and allow the system to reset, write I/O port 0443H.
64 * To disable the timer, write I/O port 0441H for the system to stop the
65 * watchdog function. The timer has a tolerance of 20% for its
68 * The following describes how the timer should be programmed.
71 * MOV AX,000FH (Choose the values from 0 to F)
76 * MOV AX,000FH (Any value is fine.)
80 * Watchdog timer control table:
81 * Level Value Time/sec | Level Value Time/sec
93 static int wd_times
[] = {
112 #define WDT_STOP 0x441
113 #define WDT_START 0x443
115 /* Default timeout */
116 #define WD_TIMO 0 /* 30 seconds +/- 20%, from table */
118 static int wd_margin
= WD_TIMO
;
120 #ifdef CONFIG_WATCHDOG_NOWAYOUT
121 static int nowayout
= 1;
123 static int nowayout
= 0;
126 module_param(nowayout
, int, 0);
127 MODULE_PARM_DESC(nowayout
, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
137 /* Write a watchdog value */
138 outb_p(wd_margin
, WDT_START
);
142 ibwdt_write(struct file
*file
, const char __user
*buf
, size_t count
, loff_t
*ppos
)
148 /* In case it was set long ago */
151 for (i
= 0; i
!= count
; i
++) {
153 if (get_user(c
, buf
+ i
))
165 ibwdt_ioctl(struct inode
*inode
, struct file
*file
, unsigned int cmd
,
169 void __user
*argp
= (void __user
*)arg
;
170 int __user
*p
= argp
;
172 static struct watchdog_info ident
= {
173 .options
= WDIOF_KEEPALIVEPING
| WDIOF_SETTIMEOUT
| WDIOF_MAGICCLOSE
,
174 .firmware_version
= 1,
175 .identity
= "IB700 WDT",
179 case WDIOC_GETSUPPORT
:
180 if (copy_to_user(argp
, &ident
, sizeof(ident
)))
184 case WDIOC_GETSTATUS
:
185 return put_user(0, p
);
187 case WDIOC_KEEPALIVE
:
191 case WDIOC_SETTIMEOUT
:
192 if (get_user(new_margin
, p
))
194 if ((new_margin
< 0) || (new_margin
> 30))
196 for (i
= 0x0F; i
> -1; i
--)
197 if (wd_times
[i
] > new_margin
)
203 case WDIOC_GETTIMEOUT
:
204 return put_user(wd_times
[wd_margin
], p
);
214 ibwdt_open(struct inode
*inode
, struct file
*file
)
216 spin_lock(&ibwdt_lock
);
217 if (test_and_set_bit(0, &ibwdt_is_open
)) {
218 spin_unlock(&ibwdt_lock
);
222 __module_get(THIS_MODULE
);
226 spin_unlock(&ibwdt_lock
);
227 return nonseekable_open(inode
, file
);
231 ibwdt_close(struct inode
*inode
, struct file
*file
)
233 spin_lock(&ibwdt_lock
);
234 if (expect_close
== 42)
237 printk(KERN_CRIT PFX
"WDT device closed unexpectedly. WDT will not stop!\n");
239 clear_bit(0, &ibwdt_is_open
);
241 spin_unlock(&ibwdt_lock
);
246 * Notifier for system down
250 ibwdt_notify_sys(struct notifier_block
*this, unsigned long code
,
253 if (code
== SYS_DOWN
|| code
== SYS_HALT
) {
254 /* Turn the WDT off */
264 static struct file_operations ibwdt_fops
= {
265 .owner
= THIS_MODULE
,
267 .write
= ibwdt_write
,
268 .ioctl
= ibwdt_ioctl
,
270 .release
= ibwdt_close
,
273 static struct miscdevice ibwdt_miscdev
= {
274 .minor
= WATCHDOG_MINOR
,
280 * The WDT needs to learn about soft shutdowns in order to
281 * turn the timebomb registers off.
284 static struct notifier_block ibwdt_notifier
= {
285 .notifier_call
= ibwdt_notify_sys
,
288 static int __init
ibwdt_init(void)
292 printk(KERN_INFO PFX
"WDT driver for IB700 single board computer initialising.\n");
294 spin_lock_init(&ibwdt_lock
);
295 res
= misc_register(&ibwdt_miscdev
);
297 printk (KERN_ERR PFX
"failed to register misc device\n");
301 #if WDT_START != WDT_STOP
302 if (!request_region(WDT_STOP
, 1, "IB700 WDT")) {
303 printk (KERN_ERR PFX
"STOP method I/O %X is not available.\n", WDT_STOP
);
309 if (!request_region(WDT_START
, 1, "IB700 WDT")) {
310 printk (KERN_ERR PFX
"START method I/O %X is not available.\n", WDT_START
);
314 res
= register_reboot_notifier(&ibwdt_notifier
);
316 printk (KERN_ERR PFX
"Failed to register reboot notifier.\n");
322 release_region(WDT_START
, 1);
324 #if WDT_START != WDT_STOP
325 release_region(WDT_STOP
, 1);
328 misc_deregister(&ibwdt_miscdev
);
336 misc_deregister(&ibwdt_miscdev
);
337 unregister_reboot_notifier(&ibwdt_notifier
);
338 #if WDT_START != WDT_STOP
339 release_region(WDT_STOP
,1);
341 release_region(WDT_START
,1);
344 module_init(ibwdt_init
);
345 module_exit(ibwdt_exit
);
347 MODULE_AUTHOR("Charles Howes <chowes@vsol.net>");
348 MODULE_DESCRIPTION("IB700 SBC watchdog driver");
349 MODULE_LICENSE("GPL");
350 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR
);
352 /* end of ib700wdt.c */