[XFRM]: skb_cow_data() does not set proper owner for new skbs.
[linux-2.6/verdex.git] / drivers / input / keyboard / sunkbd.c
blob596964ceb96dc39b0351ff386fa539351aeb6a10
1 /*
2 * $Id: sunkbd.c,v 1.14 2001/09/25 10:12:07 vojtech Exp $
4 * Copyright (c) 1999-2001 Vojtech Pavlik
5 */
7 /*
8 * Sun keyboard driver for Linux
9 */
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 * Should you need to contact me, the author, you can do so either by
27 * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
28 * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
31 #include <linux/delay.h>
32 #include <linux/slab.h>
33 #include <linux/module.h>
34 #include <linux/interrupt.h>
35 #include <linux/init.h>
36 #include <linux/input.h>
37 #include <linux/serio.h>
38 #include <linux/workqueue.h>
40 #define DRIVER_DESC "Sun keyboard driver"
42 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
43 MODULE_DESCRIPTION(DRIVER_DESC);
44 MODULE_LICENSE("GPL");
46 static unsigned char sunkbd_keycode[128] = {
47 0,128,114,129,115, 59, 60, 68, 61, 87, 62, 88, 63,100, 64, 0,
48 65, 66, 67, 56,103,119, 99, 70,105,130,131,108,106, 1, 2, 3,
49 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 41, 14,110,113, 98, 55,
50 116,132, 83,133,102, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
51 26, 27,111,127, 71, 72, 73, 74,134,135,107, 0, 29, 30, 31, 32,
52 33, 34, 35, 36, 37, 38, 39, 40, 43, 28, 96, 75, 76, 77, 82,136,
53 104,137, 69, 42, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,101,
54 79, 80, 81, 0, 0, 0,138, 58,125, 57,126,109, 86, 78
57 #define SUNKBD_CMD_RESET 0x1
58 #define SUNKBD_CMD_BELLON 0x2
59 #define SUNKBD_CMD_BELLOFF 0x3
60 #define SUNKBD_CMD_CLICK 0xa
61 #define SUNKBD_CMD_NOCLICK 0xb
62 #define SUNKBD_CMD_SETLED 0xe
63 #define SUNKBD_CMD_LAYOUT 0xf
65 #define SUNKBD_RET_RESET 0xff
66 #define SUNKBD_RET_ALLUP 0x7f
67 #define SUNKBD_RET_LAYOUT 0xfe
69 #define SUNKBD_LAYOUT_5_MASK 0x20
70 #define SUNKBD_RELEASE 0x80
71 #define SUNKBD_KEY 0x7f
74 * Per-keyboard data.
77 struct sunkbd {
78 unsigned char keycode[128];
79 struct input_dev dev;
80 struct serio *serio;
81 struct work_struct tq;
82 wait_queue_head_t wait;
83 char name[64];
84 char phys[32];
85 char type;
86 volatile s8 reset;
87 volatile s8 layout;
91 * sunkbd_interrupt() is called by the low level driver when a character
92 * is received.
95 static irqreturn_t sunkbd_interrupt(struct serio *serio,
96 unsigned char data, unsigned int flags, struct pt_regs *regs)
98 struct sunkbd* sunkbd = serio_get_drvdata(serio);
100 if (sunkbd->reset <= -1) { /* If cp[i] is 0xff, sunkbd->reset will stay -1. */
101 sunkbd->reset = data; /* The keyboard sends 0xff 0xff 0xID on powerup */
102 wake_up_interruptible(&sunkbd->wait);
103 goto out;
106 if (sunkbd->layout == -1) {
107 sunkbd->layout = data;
108 wake_up_interruptible(&sunkbd->wait);
109 goto out;
112 switch (data) {
114 case SUNKBD_RET_RESET:
115 schedule_work(&sunkbd->tq);
116 sunkbd->reset = -1;
117 break;
119 case SUNKBD_RET_LAYOUT:
120 sunkbd->layout = -1;
121 break;
123 case SUNKBD_RET_ALLUP: /* All keys released */
124 break;
126 default:
127 if (sunkbd->keycode[data & SUNKBD_KEY]) {
128 input_regs(&sunkbd->dev, regs);
129 input_report_key(&sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE));
130 input_sync(&sunkbd->dev);
131 } else {
132 printk(KERN_WARNING "sunkbd.c: Unknown key (scancode %#x) %s.\n",
133 data & SUNKBD_KEY, data & SUNKBD_RELEASE ? "released" : "pressed");
136 out:
137 return IRQ_HANDLED;
141 * sunkbd_event() handles events from the input module.
144 static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
146 struct sunkbd *sunkbd = dev->private;
148 switch (type) {
150 case EV_LED:
152 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
153 sunkbd->serio->write(sunkbd->serio,
154 (!!test_bit(LED_CAPSL, dev->led) << 3) | (!!test_bit(LED_SCROLLL, dev->led) << 2) |
155 (!!test_bit(LED_COMPOSE, dev->led) << 1) | !!test_bit(LED_NUML, dev->led));
156 return 0;
158 case EV_SND:
160 switch (code) {
162 case SND_CLICK:
163 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value);
164 return 0;
166 case SND_BELL:
167 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value);
168 return 0;
171 break;
174 return -1;
178 * sunkbd_initialize() checks for a Sun keyboard attached, and determines
179 * its type.
182 static int sunkbd_initialize(struct sunkbd *sunkbd)
184 sunkbd->reset = -2;
185 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET);
186 wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
187 if (sunkbd->reset <0)
188 return -1;
190 sunkbd->type = sunkbd->reset;
192 if (sunkbd->type == 4) { /* Type 4 keyboard */
193 sunkbd->layout = -2;
194 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_LAYOUT);
195 wait_event_interruptible_timeout(sunkbd->wait, sunkbd->layout >= 0, HZ/4);
196 if (sunkbd->layout < 0) return -1;
197 if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK) sunkbd->type = 5;
200 return 0;
204 * sunkbd_reinit() sets leds and beeps to a state the computer remembers they
205 * were in.
208 static void sunkbd_reinit(void *data)
210 struct sunkbd *sunkbd = data;
212 wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
214 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
215 sunkbd->serio->write(sunkbd->serio,
216 (!!test_bit(LED_CAPSL, sunkbd->dev.led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev.led) << 2) |
217 (!!test_bit(LED_COMPOSE, sunkbd->dev.led) << 1) | !!test_bit(LED_NUML, sunkbd->dev.led));
218 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev.snd));
219 sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev.snd));
223 * sunkbd_connect() probes for a Sun keyboard and fills the necessary structures.
226 static int sunkbd_connect(struct serio *serio, struct serio_driver *drv)
228 struct sunkbd *sunkbd;
229 int i;
230 int err;
232 if (!(sunkbd = kmalloc(sizeof(struct sunkbd), GFP_KERNEL)))
233 return -ENOMEM;
235 memset(sunkbd, 0, sizeof(struct sunkbd));
237 init_input_dev(&sunkbd->dev);
238 init_waitqueue_head(&sunkbd->wait);
240 sunkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP);
241 sunkbd->dev.ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML);
242 sunkbd->dev.sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL);
244 sunkbd->serio = serio;
246 INIT_WORK(&sunkbd->tq, sunkbd_reinit, sunkbd);
248 sunkbd->dev.keycode = sunkbd->keycode;
249 sunkbd->dev.keycodesize = sizeof(unsigned char);
250 sunkbd->dev.keycodemax = ARRAY_SIZE(sunkbd_keycode);
252 sunkbd->dev.event = sunkbd_event;
253 sunkbd->dev.private = sunkbd;
255 serio_set_drvdata(serio, sunkbd);
257 err = serio_open(serio, drv);
258 if (err) {
259 serio_set_drvdata(serio, NULL);
260 kfree(sunkbd);
261 return err;
264 if (sunkbd_initialize(sunkbd) < 0) {
265 serio_close(serio);
266 serio_set_drvdata(serio, NULL);
267 kfree(sunkbd);
268 return -ENODEV;
271 sprintf(sunkbd->name, "Sun Type %d keyboard", sunkbd->type);
273 memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode));
274 for (i = 0; i < 128; i++)
275 set_bit(sunkbd->keycode[i], sunkbd->dev.keybit);
276 clear_bit(0, sunkbd->dev.keybit);
278 sprintf(sunkbd->phys, "%s/input0", serio->phys);
280 sunkbd->dev.name = sunkbd->name;
281 sunkbd->dev.phys = sunkbd->phys;
282 sunkbd->dev.id.bustype = BUS_RS232;
283 sunkbd->dev.id.vendor = SERIO_SUNKBD;
284 sunkbd->dev.id.product = sunkbd->type;
285 sunkbd->dev.id.version = 0x0100;
286 sunkbd->dev.dev = &serio->dev;
288 input_register_device(&sunkbd->dev);
290 printk(KERN_INFO "input: %s on %s\n", sunkbd->name, serio->phys);
292 return 0;
296 * sunkbd_disconnect() unregisters and closes behind us.
299 static void sunkbd_disconnect(struct serio *serio)
301 struct sunkbd *sunkbd = serio_get_drvdata(serio);
302 input_unregister_device(&sunkbd->dev);
303 serio_close(serio);
304 serio_set_drvdata(serio, NULL);
305 kfree(sunkbd);
308 static struct serio_device_id sunkbd_serio_ids[] = {
310 .type = SERIO_RS232,
311 .proto = SERIO_SUNKBD,
312 .id = SERIO_ANY,
313 .extra = SERIO_ANY,
316 .type = SERIO_RS232,
317 .proto = SERIO_UNKNOWN, /* sunkbd does probe */
318 .id = SERIO_ANY,
319 .extra = SERIO_ANY,
321 { 0 }
324 MODULE_DEVICE_TABLE(serio, sunkbd_serio_ids);
326 static struct serio_driver sunkbd_drv = {
327 .driver = {
328 .name = "sunkbd",
330 .description = DRIVER_DESC,
331 .id_table = sunkbd_serio_ids,
332 .interrupt = sunkbd_interrupt,
333 .connect = sunkbd_connect,
334 .disconnect = sunkbd_disconnect,
338 * The functions for insering/removing us as a module.
341 static int __init sunkbd_init(void)
343 serio_register_driver(&sunkbd_drv);
344 return 0;
347 static void __exit sunkbd_exit(void)
349 serio_unregister_driver(&sunkbd_drv);
352 module_init(sunkbd_init);
353 module_exit(sunkbd_exit);