2 * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
6 * see flexcop.c for copyright information.
18 static int flexcop_set_voltage(struct dvb_frontend
*fe
, fe_sec_voltage_t voltage
)
20 struct flexcop_device
*fc
= fe
->dvb
->priv
;
22 deb_tuner("polarity/voltage = %u\n", voltage
);
24 v
= fc
->read_ibi_reg(fc
, misc_204
);
27 v
.misc_204
.ACPI1_sig
= 1;
30 v
.misc_204
.ACPI1_sig
= 0;
31 v
.misc_204
.LNB_L_H_sig
= 0;
34 v
.misc_204
.ACPI1_sig
= 0;
35 v
.misc_204
.LNB_L_H_sig
= 1;
38 err("unknown SEC_VOLTAGE value");
41 return fc
->write_ibi_reg(fc
, misc_204
, v
);
44 static int flexcop_sleep(struct dvb_frontend
* fe
)
46 struct flexcop_device
*fc
= fe
->dvb
->priv
;
47 /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
50 return fc
->fe_sleep(fe
);
52 /* v.misc_204.ACPI3_sig = 1;
53 fc->write_ibi_reg(fc,misc_204,v);*/
58 static int flexcop_set_tone(struct dvb_frontend
*fe
, fe_sec_tone_mode_t tone
)
60 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
61 struct flexcop_device
*fc
= fe
->dvb
->priv
;
66 deb_tuner("tone = %u\n",tone
);
76 err("unknown SEC_TONE value");
80 v
.lnb_switch_freq_200
.LNB_CTLPrescaler_sig
= 1; /* divide by 2 */
82 v
.lnb_switch_freq_200
.LNB_CTLHighCount_sig
= ax
;
83 v
.lnb_switch_freq_200
.LNB_CTLLowCount_sig
= ax
== 0 ? 0x1ff : ax
;
85 return fc
->write_ibi_reg(fc
,lnb_switch_freq_200
,v
);
88 static void flexcop_diseqc_send_bit(struct dvb_frontend
* fe
, int data
)
90 flexcop_set_tone(fe
, SEC_TONE_ON
);
91 udelay(data
? 500 : 1000);
92 flexcop_set_tone(fe
, SEC_TONE_OFF
);
93 udelay(data
? 1000 : 500);
96 static void flexcop_diseqc_send_byte(struct dvb_frontend
* fe
, int data
)
100 for (i
= 7; i
>= 0; i
--) {
103 flexcop_diseqc_send_bit(fe
, d
);
106 flexcop_diseqc_send_bit(fe
, par
);
109 static int flexcop_send_diseqc_msg(struct dvb_frontend
* fe
, int len
, u8
*msg
, unsigned long burst
)
113 flexcop_set_tone(fe
, SEC_TONE_OFF
);
116 for (i
= 0; i
< len
; i
++)
117 flexcop_diseqc_send_byte(fe
,msg
[i
]);
123 flexcop_diseqc_send_byte(fe
, 0xff);
125 flexcop_set_tone(fe
, SEC_TONE_ON
);
127 flexcop_set_tone(fe
, SEC_TONE_OFF
);
134 static int flexcop_diseqc_send_master_cmd(struct dvb_frontend
* fe
, struct dvb_diseqc_master_cmd
* cmd
)
136 return flexcop_send_diseqc_msg(fe
, cmd
->msg_len
, cmd
->msg
, 0);
139 static int flexcop_diseqc_send_burst(struct dvb_frontend
* fe
, fe_sec_mini_cmd_t minicmd
)
141 return flexcop_send_diseqc_msg(fe
, 0, NULL
, minicmd
);
145 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend
* fe
, u32 srate
, u32 ratio
)
150 if (srate
< 1500000) { aclk
= 0xb7; bclk
= 0x47; }
151 else if (srate
< 3000000) { aclk
= 0xb7; bclk
= 0x4b; }
152 else if (srate
< 7000000) { aclk
= 0xb7; bclk
= 0x4f; }
153 else if (srate
< 14000000) { aclk
= 0xb7; bclk
= 0x53; }
154 else if (srate
< 30000000) { aclk
= 0xb6; bclk
= 0x53; }
155 else if (srate
< 45000000) { aclk
= 0xb4; bclk
= 0x51; }
157 stv0299_writereg (fe
, 0x13, aclk
);
158 stv0299_writereg (fe
, 0x14, bclk
);
159 stv0299_writereg (fe
, 0x1f, (ratio
>> 16) & 0xff);
160 stv0299_writereg (fe
, 0x20, (ratio
>> 8) & 0xff);
161 stv0299_writereg (fe
, 0x21, (ratio
) & 0xf0);
166 static int samsung_tbmu24112_pll_set(struct dvb_frontend
* fe
, struct dvb_frontend_parameters
* params
)
170 struct i2c_msg msg
= { .addr
= 0x61, .flags
= 0, .buf
= buf
, .len
= sizeof(buf
) };
171 struct flexcop_device
*fc
= fe
->dvb
->priv
;
173 div
= params
->frequency
/ 125;
175 buf
[0] = (div
>> 8) & 0x7f;
177 buf
[2] = 0x84; /* 0xC4 */
180 if (params
->frequency
< 1500000) buf
[3] |= 0x10;
182 if (i2c_transfer(&fc
->i2c_adap
, &msg
, 1) != 1)
187 static u8 samsung_tbmu24112_inittab
[] = {
232 static struct stv0299_config samsung_tbmu24112_config
= {
233 .demod_address
= 0x68,
234 .inittab
= samsung_tbmu24112_inittab
,
237 .enhanced_tuning
= 0,
239 .lock_output
= STV0229_LOCKOUTPUT_LK
,
240 .volt13_op0_op1
= STV0299_VOLT13_OP1
,
242 .set_symbol_rate
= samsung_tbmu24112_set_symbol_rate
,
243 .pll_set
= samsung_tbmu24112_pll_set
,
247 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend
* fe
)
249 static u8 mt352_clock_config
[] = { 0x89, 0x18, 0x2d };
250 static u8 mt352_reset
[] = { 0x50, 0x80 };
251 static u8 mt352_adc_ctl_1_cfg
[] = { 0x8E, 0x40 };
252 static u8 mt352_agc_cfg
[] = { 0x67, 0x28, 0xa1 };
253 static u8 mt352_capt_range_cfg
[] = { 0x75, 0x32 };
255 mt352_write(fe
, mt352_clock_config
, sizeof(mt352_clock_config
));
257 mt352_write(fe
, mt352_reset
, sizeof(mt352_reset
));
258 mt352_write(fe
, mt352_adc_ctl_1_cfg
, sizeof(mt352_adc_ctl_1_cfg
));
260 mt352_write(fe
, mt352_agc_cfg
, sizeof(mt352_agc_cfg
));
261 mt352_write(fe
, mt352_capt_range_cfg
, sizeof(mt352_capt_range_cfg
));
266 static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend
* fe
, struct dvb_frontend_parameters
* params
, u8
* pllbuf
)
269 unsigned char bs
= 0;
271 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
272 div
= (((params
->frequency
+ 83333) * 3) / 500000) + IF_FREQUENCYx6
;
274 if (params
->frequency
>= 48000000 && params
->frequency
<= 154000000) bs
= 0x09;
275 if (params
->frequency
>= 161000000 && params
->frequency
<= 439000000) bs
= 0x0a;
276 if (params
->frequency
>= 447000000 && params
->frequency
<= 863000000) bs
= 0x08;
278 pllbuf
[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
279 pllbuf
[1] = div
>> 8;
280 pllbuf
[2] = div
& 0xff;
287 static struct mt352_config samsung_tdtc9251dh0_config
= {
289 .demod_address
= 0x0f,
290 .demod_init
= samsung_tdtc9251dh0_demod_init
,
291 .pll_set
= samsung_tdtc9251dh0_pll_set
,
294 static int nxt2002_request_firmware(struct dvb_frontend
* fe
, const struct firmware
**fw
, char* name
)
296 struct flexcop_device
*fc
= fe
->dvb
->priv
;
297 return request_firmware(fw
, name
, fc
->dev
);
300 static struct nxt2002_config samsung_tbmv_config
= {
301 .demod_address
= 0x0a,
302 .request_firmware
= nxt2002_request_firmware
,
305 static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend
* fe
, struct dvb_frontend_parameters
* params
)
309 struct i2c_msg msg
= { .addr
= 0x61, .flags
= 0, .buf
= buf
, .len
= sizeof(buf
) };
310 struct flexcop_device
*fc
= fe
->dvb
->priv
;
312 div
= (params
->frequency
+ (125/2)) / 125;
314 buf
[0] = (div
>> 8) & 0x7f;
315 buf
[1] = (div
>> 0) & 0xff;
316 buf
[2] = 0x84 | ((div
>> 10) & 0x60);
319 if (params
->frequency
< 1550000)
322 if (i2c_transfer(&fc
->i2c_adap
, &msg
, 1) != 1)
327 static struct mt312_config skystar23_samsung_tbdu18132_config
= {
329 .demod_address
= 0x0e,
330 .pll_set
= skystar23_samsung_tbdu18132_pll_set
,
333 static struct stv0297_config alps_tdee4_stv0297_config
= {
334 .demod_address
= 0x1c,
336 // .pll_set = alps_tdee4_stv0297_pll_set,
339 /* try to figure out the frontend, each card/box can have on of the following list */
340 int flexcop_frontend_init(struct flexcop_device
*fc
)
342 /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
343 if ((fc
->fe
= stv0299_attach(&samsung_tbmu24112_config
, &fc
->i2c_adap
)) != NULL
) {
344 fc
->fe
->ops
->set_voltage
= flexcop_set_voltage
;
346 fc
->fe_sleep
= fc
->fe
->ops
->sleep
;
347 fc
->fe
->ops
->sleep
= flexcop_sleep
;
349 fc
->dev_type
= FC_SKY
;
350 info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config
.demod_address
);
352 /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
353 if ((fc
->fe
= mt352_attach(&samsung_tdtc9251dh0_config
, &fc
->i2c_adap
)) != NULL
) {
354 fc
->dev_type
= FC_AIR_DVB
;
355 info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config
.demod_address
);
357 /* try the air atsc (nxt2002) */
358 if ((fc
->fe
= nxt2002_attach(&samsung_tbmv_config
, &fc
->i2c_adap
)) != NULL
) {
359 fc
->dev_type
= FC_AIR_ATSC
;
360 info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config
.demod_address
);
362 /* try the cable dvb (stv0297) */
363 if ((fc
->fe
= stv0297_attach(&alps_tdee4_stv0297_config
, &fc
->i2c_adap
, 0xf8)) != NULL
) {
364 fc
->dev_type
= FC_CABLE
;
365 info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config
.demod_address
);
367 /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
368 if ((fc
->fe
= vp310_attach(&skystar23_samsung_tbdu18132_config
, &fc
->i2c_adap
)) != NULL
) {
369 fc
->fe
->ops
->diseqc_send_master_cmd
= flexcop_diseqc_send_master_cmd
;
370 fc
->fe
->ops
->diseqc_send_burst
= flexcop_diseqc_send_burst
;
371 fc
->fe
->ops
->set_tone
= flexcop_set_tone
;
372 fc
->fe
->ops
->set_voltage
= flexcop_set_voltage
;
374 fc
->fe_sleep
= fc
->fe
->ops
->sleep
;
375 fc
->fe
->ops
->sleep
= flexcop_sleep
;
377 fc
->dev_type
= FC_SKY_OLD
;
378 info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config
.demod_address
);
381 if (fc
->fe
== NULL
) {
382 err("no frontend driver found for this B2C2/FlexCop adapter");
385 if (dvb_register_frontend(&fc
->dvb_adapter
, fc
->fe
)) {
386 err("frontend registration failed!");
387 if (fc
->fe
->ops
->release
!= NULL
)
388 fc
->fe
->ops
->release(fc
->fe
);
393 fc
->init_state
|= FC_STATE_FE_INIT
;
397 void flexcop_frontend_exit(struct flexcop_device
*fc
)
399 if (fc
->init_state
& FC_STATE_FE_INIT
)
400 dvb_unregister_frontend(fc
->fe
);
402 fc
->init_state
&= ~FC_STATE_FE_INIT
;