?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[XFRM]: skb_cow_data() does not set proper owner for new skbs.
[linux-2.6/verdex.git] / drivers / media / video / bttv-cards.c
blob6334122704aecead4a200695d649c2f544522110
1 /*
2 $Id: bttv-cards.c,v 1.47 2005/02/22 14:06:32 kraxel Exp $
3
4 bttv-cards.c
5
6 this file has configuration informations - card-specific stuff
7 like the big tvcards array for the most part
8
9 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
10 & Marcus Metzler (mocm@thp.uni-koeln.de)
11 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12
13 This program is free software; you can redistribute it and/or modify
14 it under the terms of the GNU General Public License as published by
15 the Free Software Foundation; either version 2 of the License, or
16 (at your option) any later version.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 You should have received a copy of the GNU General Public License
24 along with this program; if not, write to the Free Software
25 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26
27 */
28
29 #include <linux/config.h>
30 #include <linux/delay.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
33 #include <linux/kmod.h>
34 #include <linux/init.h>
35 #include <linux/pci.h>
36 #include <linux/vmalloc.h>
37 #include <linux/firmware.h>
38
39 #include <asm/io.h>
40
41 #include "bttvp.h"
42 #if 0 /* not working yet */
43 #include "bt832.h"
44 #endif
45
46 /* fwd decl */
47 static void boot_msp34xx(struct bttv *btv, int pin);
48 static void boot_bt832(struct bttv *btv);
49 static void hauppauge_eeprom(struct bttv *btv);
50 static void avermedia_eeprom(struct bttv *btv);
51 static void osprey_eeprom(struct bttv *btv);
52 static void modtec_eeprom(struct bttv *btv);
53 static void init_PXC200(struct bttv *btv);
54
55 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
56 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
57 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
58 int set);
59 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
60 int set);
61 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
68 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
69 static void rv605_muxsel(struct bttv *btv, unsigned int input);
70 static void eagle_muxsel(struct bttv *btv, unsigned int input);
71 static void xguard_muxsel(struct bttv *btv, unsigned int input);
72 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
73 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
74
75 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
76
77 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
78 static void picolo_tetra_init(struct bttv *btv);
79
80 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
81 static void tibetCS16_init(struct bttv *btv);
82
83 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
84 static void kodicom4400r_init(struct bttv *btv);
85
86 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
87 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
88
89 static int terratec_active_radio_upgrade(struct bttv *btv);
90 static int tea5757_read(struct bttv *btv);
91 static int tea5757_write(struct bttv *btv, int value);
92 static void identify_by_eeprom(struct bttv *btv,
93 unsigned char eeprom_data[256]);
94 static int __devinit pvr_boot(struct bttv *btv);
95
96 /* config variables */
97 static unsigned int triton1=0;
98 static unsigned int vsfx=0;
99 static unsigned int latency = UNSET;
100 static unsigned int no_overlay=-1;
101
102 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
106 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
107 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
108 #ifdef MODULE
109 static unsigned int autoload = 1;
110 #else
111 static unsigned int autoload = 0;
112 #endif
113 static unsigned int gpiomask = UNSET;
114 static unsigned int audioall = UNSET;
115 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
116
117 /* insmod options */
118 module_param(triton1, int, 0444);
119 module_param(vsfx, int, 0444);
120 module_param(no_overlay, int, 0444);
121 module_param(latency, int, 0444);
122 module_param(gpiomask, int, 0444);
123 module_param(audioall, int, 0444);
124 module_param(autoload, int, 0444);
125
126 module_param_array(card, int, NULL, 0444);
127 module_param_array(pll, int, NULL, 0444);
128 module_param_array(tuner, int, NULL, 0444);
129 module_param_array(svhs, int, NULL, 0444);
130 module_param_array(remote, int, NULL, 0444);
131 module_param_array(audiomux, int, NULL, 0444);
132
133 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
134 "[enable bug compatibility for triton1 + others]");
135 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
136 "[yet another chipset flaw workaround]");
137 MODULE_PARM_DESC(latency,"pci latency timer");
138 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
139 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
140 MODULE_PARM_DESC(tuner,"specify installed tuner type");
141 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
142
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
145
146 static struct CARD {
147 unsigned id;
148 int cardnr;
149 char *name;
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_OSPREY540, "Osprey-540" },
159
160 { 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
161 { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
162
163 { 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
164 { 0x6607107d, BTTV_WINFASTVC100, "Leadtek WinFast VC 100" },
165 { 0x6609107d, BTTV_WINFAST2000, "Leadtek TV 2000 XP" },
166 { 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
167 { 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
169 { 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
170 { 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
171 { 0xd01810fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172
173 { 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
174 // some cards ship with byteswapped IDs ...
175 { 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
176 { 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
177 // this seems to happen as well ...
178 { 0xff1211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
179
180 { 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
181 { 0x263710b4, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
182 { 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
183
184 { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
185 { 0xa005144f, BTTV_MAGICTVIEW063, "CPH06X TView99-Card" },
186 { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
187 { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
188 { 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
189 { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
190 { 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
191
192 { 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
193 { 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
194 { 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
195 { 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
196 { 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
197
198 { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
199 { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
200 { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
201 { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
202
203 { 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
204 { 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
205 // clashes with FlyVideo
206 //{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
207 { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
208 { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
209 { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
210 { 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // ??
211
212 { 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
213 { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
215 { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217
218 { 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
219 { 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
220 { 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
221 { 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
222 { 0x1433aa03, BTTV_PV143, "Security Eyes" },
223
224 { 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
225 { 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
226 { 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
227 { 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
228
229 { 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
230 { 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
231 { 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
232 { 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
233
234 { 0xa132ff00, BTTV_IVC100, "IVC-100" },
235 { 0xa1550000, BTTV_IVC200, "IVC-200" },
236 { 0xa1550001, BTTV_IVC200, "IVC-200" },
237 { 0xa1550002, BTTV_IVC200, "IVC-200" },
238 { 0xa1550003, BTTV_IVC200, "IVC-200" },
239 { 0xa1550100, BTTV_IVC200, "IVC-200G" },
240 { 0xa1550101, BTTV_IVC200, "IVC-200G" },
241 { 0xa1550102, BTTV_IVC200, "IVC-200G" },
242 { 0xa1550103, BTTV_IVC200, "IVC-200G" },
243 { 0xa182ff00, BTTV_IVC120, "IVC-120G" },
244 { 0xa182ff01, BTTV_IVC120, "IVC-120G" },
245 { 0xa182ff02, BTTV_IVC120, "IVC-120G" },
246 { 0xa182ff03, BTTV_IVC120, "IVC-120G" },
247 { 0xa182ff04, BTTV_IVC120, "IVC-120G" },
248 { 0xa182ff05, BTTV_IVC120, "IVC-120G" },
249 { 0xa182ff06, BTTV_IVC120, "IVC-120G" },
250 { 0xa182ff07, BTTV_IVC120, "IVC-120G" },
251 { 0xa182ff08, BTTV_IVC120, "IVC-120G" },
252 { 0xa182ff09, BTTV_IVC120, "IVC-120G" },
253 { 0xa182ff0a, BTTV_IVC120, "IVC-120G" },
254 { 0xa182ff0b, BTTV_IVC120, "IVC-120G" },
255 { 0xa182ff0c, BTTV_IVC120, "IVC-120G" },
256 { 0xa182ff0d, BTTV_IVC120, "IVC-120G" },
257 { 0xa182ff0e, BTTV_IVC120, "IVC-120G" },
258 { 0xa182ff0f, BTTV_IVC120, "IVC-120G" },
259
260 { 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
261 { 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
262
263 { 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
264 { 0xa0501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
265 { 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
266 { 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
267 { 0x41a0a051, BTTV_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
268 { 0x18501f7f, BTTV_FLYVIDEO_98, "Lifeview Flyvideo 98" },
269
270 { 0x010115cb, BTTV_GMV1, "AG GMV1" },
271 { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
272
273 { 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
274 { 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
275 { 0xfff6f6ff, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
276 { 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
277 { 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
278 { 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
279 { 0x20007063, BTTV_PC_HDTV, "pcHDTV HD-2000 TV"},
280 { 0x82b2aa6a, BTTV_SIMUS_GVC1100, "SIMUS GVC1100" },
281 { 0x146caa0c, BTTV_PV951, "ituner spectra8" },
282 { 0x200a1295, BTTV_PXC200, "ImageNation PXC200A" },
283
284 { 0x40111554, BTTV_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
285 { 0x17de0a01, BTTV_KWORLD, "Mecer TV/FM/Video Tuner" },
286
287 { 0x01051805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
288 { 0x01061805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
289 { 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
290 { 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
291
292 // likely broken, vendor id doesn't match the other magic views ...
293 //{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
294
295 // DVB cards (using pci function .1 for mpeg data xfer)
296 { 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
297 { 0x07611461, BTTV_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
298 { 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
299 { 0x002611bd, BTTV_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
300 { 0x00011822, BTTV_TWINHAN_DST, "Twinhan VisionPlus DVB" },
301 { 0xfc00270f, BTTV_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
302 { 0x07711461, BTTV_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
303 { 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DVICO FusionHDTV DVB-T Lite" },
304
305 { 0, -1, NULL }
306 };
307
308 /* ----------------------------------------------------------------------- */
309 /* array with description for bt848 / bt878 tv/grabber cards */
310
311 struct tvcard bttv_tvcards[] = {
312 {
313 /* ---- card 0x00 ---------------------------------- */
314 .name = " *** UNKNOWN/GENERIC *** ",
315 .video_inputs = 4,
316 .audio_inputs = 1,
317 .tuner = 0,
318 .svhs = 2,
319 .muxsel = { 2, 3, 1, 0},
320 .tuner_type = -1,
321 },{
322 .name = "MIRO PCTV",
323 .video_inputs = 4,
324 .audio_inputs = 1,
325 .tuner = 0,
326 .svhs = 2,
327 .gpiomask = 15,
328 .muxsel = { 2, 3, 1, 1},
329 .audiomux = { 2, 0, 0, 0, 10},
330 .needs_tvaudio = 1,
331 .tuner_type = -1,
332 },{
333 .name = "Hauppauge (bt848)",
334 .video_inputs = 4,
335 .audio_inputs = 1,
336 .tuner = 0,
337 .svhs = 2,
338 .gpiomask = 7,
339 .muxsel = { 2, 3, 1, 1},
340 .audiomux = { 0, 1, 2, 3, 4},
341 .needs_tvaudio = 1,
342 .tuner_type = -1,
343 },{
344 .name = "STB, Gateway P/N 6000699 (bt848)",
345 .video_inputs = 3,
346 .audio_inputs = 1,
347 .tuner = 0,
348 .svhs = 2,
349 .gpiomask = 7,
350 .muxsel = { 2, 3, 1, 1},
351 .audiomux = { 4, 0, 2, 3, 1},
352 .no_msp34xx = 1,
353 .needs_tvaudio = 1,
354 .tuner_type = TUNER_PHILIPS_NTSC,
355 .pll = PLL_28,
356 .has_radio = 1,
357 },{
358
359 /* ---- card 0x04 ---------------------------------- */
360 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
361 .video_inputs = 4,
362 .audio_inputs = 0,
363 .tuner = -1,
364 .svhs = 2,
365 .gpiomask = 0,
366 .muxsel = { 2, 3, 1, 1},
367 .audiomux = { 0 },
368 .needs_tvaudio = 0,
369 .tuner_type = 4,
370 },{
371 .name = "Diamond DTV2000",
372 .video_inputs = 4,
373 .audio_inputs = 1,
374 .tuner = 0,
375 .svhs = 2,
376 .gpiomask = 3,
377 .muxsel = { 2, 3, 1, 0},
378 .audiomux = { 0, 1, 0, 1, 3},
379 .needs_tvaudio = 1,
380 .tuner_type = -1,
381 },{
382 .name = "AVerMedia TVPhone",
383 .video_inputs = 3,
384 .audio_inputs = 1,
385 .tuner = 0,
386 .svhs = 3,
387 .muxsel = { 2, 3, 1, 1},
388 .gpiomask = 0x0f,
389 .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
390 /* 0x04 for some cards ?? */
391 .needs_tvaudio = 1,
392 .tuner_type = -1,
393 .audio_hook = avermedia_tvphone_audio,
394 .has_remote = 1,
395 },{
396 .name = "MATRIX-Vision MV-Delta",
397 .video_inputs = 5,
398 .audio_inputs = 1,
399 .tuner = -1,
400 .svhs = 3,
401 .gpiomask = 0,
402 .muxsel = { 2, 3, 1, 0, 0},
403 .audiomux = {0 },
404 .needs_tvaudio = 1,
405 .tuner_type = -1,
406 },{
407
408 /* ---- card 0x08 ---------------------------------- */
409 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
410 .video_inputs = 4,
411 .audio_inputs = 1,
412 .tuner = 0,
413 .svhs = 2,
414 .gpiomask = 0xc00,
415 .muxsel = { 2, 3, 1, 1},
416 .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
417 .needs_tvaudio = 1,
418 .pll = PLL_28,
419 .tuner_type = -1,
420 },{
421 .name = "IMS/IXmicro TurboTV",
422 .video_inputs = 3,
423 .audio_inputs = 1,
424 .tuner = 0,
425 .svhs = 2,
426 .gpiomask = 3,
427 .muxsel = { 2, 3, 1, 1},
428 .audiomux = { 1, 1, 2, 3, 0},
429 .needs_tvaudio = 0,
430 .pll = PLL_28,
431 .tuner_type = TUNER_TEMIC_PAL,
432 },{
433 .name = "Hauppauge (bt878)",
434 .video_inputs = 4,
435 .audio_inputs = 1,
436 .tuner = 0,
437 .svhs = 2,
438 .gpiomask = 0x0f, /* old: 7 */
439 .muxsel = { 2, 0, 1, 1},
440 .audiomux = { 0, 1, 2, 3, 4},
441 .needs_tvaudio = 1,
442 .pll = PLL_28,
443 .tuner_type = -1,
444 },{
445 .name = "MIRO PCTV pro",
446 .video_inputs = 3,
447 .audio_inputs = 1,
448 .tuner = 0,
449 .svhs = 2,
450 .gpiomask = 0x3014f,
451 .muxsel = { 2, 3, 1, 1},
452 .audiomux = { 0x20001,0x10001, 0, 0,10},
453 .needs_tvaudio = 1,
454 .tuner_type = -1,
455 },{
456
457 /* ---- card 0x0c ---------------------------------- */
458 .name = "ADS Technologies Channel Surfer TV (bt848)",
459 .video_inputs = 3,
460 .audio_inputs = 1,
461 .tuner = 0,
462 .svhs = 2,
463 .gpiomask = 15,
464 .muxsel = { 2, 3, 1, 1},
465 .audiomux = { 13, 14, 11, 7, 0, 0},
466 .needs_tvaudio = 1,
467 .tuner_type = -1,
468 },{
469 .name = "AVerMedia TVCapture 98",
470 .video_inputs = 3,
471 .audio_inputs = 4,
472 .tuner = 0,
473 .svhs = 2,
474 .gpiomask = 15,
475 .muxsel = { 2, 3, 1, 1},
476 .audiomux = { 13, 14, 11, 7, 0, 0},
477 .needs_tvaudio = 1,
478 .msp34xx_alt = 1,
479 .pll = PLL_28,
480 .tuner_type = TUNER_PHILIPS_PAL,
481 .audio_hook = avermedia_tv_stereo_audio,
482 },{
483 .name = "Aimslab Video Highway Xtreme (VHX)",
484 .video_inputs = 3,
485 .audio_inputs = 1,
486 .tuner = 0,
487 .svhs = 2,
488 .gpiomask = 7,
489 .muxsel = { 2, 3, 1, 1},
490 .audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
491 .needs_tvaudio = 1,
492 .pll = PLL_28,
493 .tuner_type = -1,
494 },{
495 .name = "Zoltrix TV-Max",
496 .video_inputs = 3,
497 .audio_inputs = 1,
498 .tuner = 0,
499 .svhs = 2,
500 .gpiomask = 15,
501 .muxsel = { 2, 3, 1, 1},
502 .audiomux = {0 , 0, 1 , 0, 10},
503 .needs_tvaudio = 1,
504 .tuner_type = -1,
505 },{
506
507 /* ---- card 0x10 ---------------------------------- */
508 .name = "Prolink Pixelview PlayTV (bt878)",
509 .video_inputs = 3,
510 .audio_inputs = 1,
511 .tuner = 0,
512 .svhs = 2,
513 .gpiomask = 0x01fe00,
514 .muxsel = { 2, 3, 1, 1},
515 #if 0
516 // old
517 .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
518 #else
519 // 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru>
520 .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
521 #endif
522 .needs_tvaudio = 1,
523 .pll = PLL_28,
524 .tuner_type = -1,
525 },{
526 .name = "Leadtek WinView 601",
527 .video_inputs = 3,
528 .audio_inputs = 1,
529 .tuner = 0,
530 .svhs = 2,
531 .gpiomask = 0x8300f8,
532 .muxsel = { 2, 3, 1, 1,0},
533 .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
534 .needs_tvaudio = 1,
535 .tuner_type = -1,
536 .audio_hook = winview_audio,
537 .has_radio = 1,
538 },{
539 .name = "AVEC Intercapture",
540 .video_inputs = 3,
541 .audio_inputs = 2,
542 .tuner = 0,
543 .svhs = 2,
544 .gpiomask = 0,
545 .muxsel = {2, 3, 1, 1},
546 .audiomux = {1, 0, 0, 0, 0},
547 .needs_tvaudio = 1,
548 .tuner_type = -1,
549 },{
550 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
551 .video_inputs = 4,
552 .audio_inputs = 1,
553 .tuner = -1,
554 .svhs = -1,
555 .gpiomask = 0x8dff00,
556 .muxsel = { 2, 3, 1, 1},
557 .audiomux = { 0 },
558 .no_msp34xx = 1,
559 .tuner_type = -1,
560 },{
561
562 /* ---- card 0x14 ---------------------------------- */
563 .name = "CEI Raffles Card",
564 .video_inputs = 3,
565 .audio_inputs = 3,
566 .tuner = 0,
567 .svhs = 2,
568 .muxsel = {2, 3, 1, 1},
569 .tuner_type = -1,
570 },{
571 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
572 .video_inputs = 4,
573 .audio_inputs = 2, // tuner, line in
574 .tuner = 0,
575 .svhs = 2,
576 .gpiomask = 0x1800,
577 .muxsel = { 2, 3, 1, 1},
578 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
579 .pll = PLL_28,
580 .tuner_type = TUNER_PHILIPS_PAL_I,
581 },{
582 .name = "Askey CPH050/ Phoebe Tv Master + FM",
583 .video_inputs = 3,
584 .audio_inputs = 1,
585 .tuner = 0,
586 .svhs = 2,
587 .gpiomask = 0xc00,
588 .muxsel = { 2, 3, 1, 1},
589 .audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
590 .needs_tvaudio = 1,
591 .pll = PLL_28,
592 .tuner_type = -1,
593 },{
594 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
595 .video_inputs = 3,
596 .audio_inputs = 1,
597 .tuner = 0,
598 .svhs = -1,
599 .gpiomask = 7,
600 .muxsel = { 2, 3, -1 },
601 .digital_mode = DIGITAL_MODE_CAMERA,
602 .audiomux = { 0, 0, 0, 0, 0 },
603 .no_msp34xx = 1,
604 .pll = PLL_28,
605 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
606 },{
607
608 /* ---- card 0x18 ---------------------------------- */
609 .name = "Askey CPH05X/06X (bt878) [many vendors]",
610 .video_inputs = 3,
611 .audio_inputs = 1,
612 .tuner = 0,
613 .svhs = 2,
614 .gpiomask = 0xe00,
615 .muxsel = { 2, 3, 1, 1},
616 .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
617 .needs_tvaudio = 1,
618 .pll = PLL_28,
619 .tuner_type = -1,
620 .has_remote = 1,
621 },{
622 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
623 .video_inputs = 3,
624 .audio_inputs = 1,
625 .tuner = 0,
626 .svhs = 2,
627 .gpiomask = 0x1f0fff,
628 .muxsel = { 2, 3, 1, 1},
629 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
630 .needs_tvaudio = 0,
631 .tuner_type = TUNER_PHILIPS_PAL,
632 .audio_hook = terratv_audio,
633 },{
634 .name = "Hauppauge WinCam newer (bt878)",
635 .video_inputs = 4,
636 .audio_inputs = 1,
637 .tuner = 0,
638 .svhs = 3,
639 .gpiomask = 7,
640 .muxsel = { 2, 0, 1, 1},
641 .audiomux = { 0, 1, 2, 3, 4},
642 .needs_tvaudio = 1,
643 .tuner_type = -1,
644 },{
645 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
646 .video_inputs = 4,
647 .audio_inputs = 2,
648 .tuner = 0,
649 .svhs = 2,
650 .gpiomask = 0x1800,
651 .muxsel = { 2, 3, 1, 1},
652 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
653 .pll = PLL_28,
654 .tuner_type = TUNER_PHILIPS_SECAM,
655 },{
656
657 /* ---- card 0x1c ---------------------------------- */
658 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
659 .video_inputs = 3,
660 .audio_inputs = 1,
661 .tuner = 0,
662 .svhs = 2,
663 .gpiomask = 0x1f0fff,
664 .muxsel = { 2, 3, 1, 1},
665 .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
666 .needs_tvaudio = 0,
667 .tuner_type = TUNER_PHILIPS_PAL,
668 .audio_hook = terratv_audio,
669 /* GPIO wiring:
670 External 20 pin connector (for Active Radio Upgrade board)
671 gpio00: i2c-sda
672 gpio01: i2c-scl
673 gpio02: om5610-data
674 gpio03: om5610-clk
675 gpio04: om5610-wre
676 gpio05: om5610-stereo
677 gpio06: rds6588-davn
678 gpio07: Pin 7 n.c.
679 gpio08: nIOW
680 gpio09+10: nIOR, nSEL ?? (bt878)
681 gpio09: nIOR (bt848)
682 gpio10: nSEL (bt848)
683 Sound Routing:
684 gpio16: u2-A0 (1st 4052bt)
685 gpio17: u2-A1
686 gpio18: u2-nEN
687 gpio19: u4-A0 (2nd 4052)
688 gpio20: u4-A1
689 u4-nEN - GND
690 Btspy:
691 00000 : Cdrom (internal audio input)
692 10000 : ext. Video audio input
693 20000 : TV Mono
694 a0000 : TV Mono/2
695 1a0000 : TV Stereo
696 30000 : Radio
697 40000 : Mute
698 */
699
700 },{
701 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
702 .name = "Imagenation PXC200",
703 .video_inputs = 5,
704 .audio_inputs = 1,
705 .tuner = -1,
706 .svhs = 1, /* was: 4 */
707 .gpiomask = 0,
708 .muxsel = { 2, 3, 1, 0, 0},
709 .audiomux = { 0 },
710 .needs_tvaudio = 1,
711 .tuner_type = -1,
712 .muxsel_hook = PXC200_muxsel,
713
714 },{
715 .name = "Lifeview FlyVideo 98 LR50",
716 .video_inputs = 4,
717 .audio_inputs = 1,
718 .tuner = 0,
719 .svhs = 2,
720 .gpiomask = 0x1800, //0x8dfe00
721 .muxsel = { 2, 3, 1, 1},
722 .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
723 .pll = PLL_28,
724 .tuner_type = -1,
725 },{
726 .name = "Formac iProTV, Formac ProTV I (bt848)",
727 .video_inputs = 4,
728 .audio_inputs = 1,
729 .tuner = 0,
730 .svhs = 3,
731 .gpiomask = 1,
732 .muxsel = { 2, 3, 1, 1},
733 .audiomux = { 1, 0, 0, 0, 0 },
734 .pll = PLL_28,
735 .tuner_type = TUNER_PHILIPS_PAL,
736 },{
737
738 /* ---- card 0x20 ---------------------------------- */
739 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
740 .video_inputs = 4,
741 .audio_inputs = 0,
742 .tuner = -1,
743 .svhs = 2,
744 .gpiomask = 0,
745 .muxsel = { 2, 3, 1, 1},
746 .audiomux = { 0 },
747 .needs_tvaudio = 0,
748 .tuner_type = 4,
749 },{
750 .name = "Terratec TerraTValue Version Bt878",
751 .video_inputs = 3,
752 .audio_inputs = 1,
753 .tuner = 0,
754 .svhs = 2,
755 .gpiomask = 0xffff00,
756 .muxsel = { 2, 3, 1, 1},
757 .audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
758 .needs_tvaudio = 1,
759 .pll = PLL_28,
760 .tuner_type = TUNER_PHILIPS_PAL,
761 },{
762 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
763 .video_inputs = 4,
764 .audio_inputs = 1,
765 .tuner = 0,
766 .svhs = 2,
767 .muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
768 #if 0
769 .gpiomask = 0xc33000,
770 .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
771 #else
772 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
773 .gpiomask = 0xb33000,
774 .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
775 #endif
776 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
777 gpio23 -- hef4052:nEnable (0x800000)
778 gpio12 -- hef4052:A1
779 gpio13 -- hef4052:A0
780 0x0000: external audio
781 0x1000: FM
782 0x2000: TV
783 0x3000: n.c.
784 Note: There exists another variant "Winfast 2000" with tv stereo !?
785 Note: eeprom only contains FF and pci subsystem id 107d:6606
786 */
787 .needs_tvaudio = 0,
788 .pll = PLL_28,
789 .has_radio = 1,
790 .tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
791 .audio_hook = winfast2000_audio,
792 .has_remote = 1,
793 },{
794 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
795 .video_inputs = 4,
796 .audio_inputs = 3,
797 .tuner = 0,
798 .svhs = 2,
799 .gpiomask = 0x1800,
800 .muxsel = { 2, 3, 1, 1},
801 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
802 .pll = PLL_28,
803 .tuner_type = -1,
804 },{
805
806 /* ---- card 0x24 ---------------------------------- */
807 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
808 .video_inputs = 4,
809 .audio_inputs = 3,
810 .tuner = 0,
811 .svhs = 2,
812 .gpiomask = 0x1800,
813 .muxsel = { 2, 3, 1, 1},
814 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
815 .pll = PLL_28,
816 .tuner_type = -1,
817 .has_radio = 1,
818 },{
819 .name = "Prolink PixelView PlayTV pro",
820 .video_inputs = 3,
821 .audio_inputs = 1,
822 .tuner = 0,
823 .svhs = 2,
824 .gpiomask = 0xff,
825 .muxsel = { 2, 3, 1, 1 },
826 .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
827 .no_msp34xx = 1,
828 .pll = PLL_28,
829 .tuner_type = -1,
830 },{
831 .name = "Askey CPH06X TView99",
832 .video_inputs = 4,
833 .audio_inputs = 1,
834 .tuner = 0,
835 .svhs = 2,
836 .gpiomask = 0x551e00,
837 .muxsel = { 2, 3, 1, 0},
838 .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
839 .needs_tvaudio = 1,
840 .pll = PLL_28,
841 .tuner_type = 1,
842 .has_remote = 1,
843 },{
844 .name = "Pinnacle PCTV Studio/Rave",
845 .video_inputs = 3,
846 .audio_inputs = 1,
847 .tuner = 0,
848 .svhs = 2,
849 .gpiomask = 0x03000F,
850 .muxsel = { 2, 3, 1, 1},
851 .audiomux = { 2, 0xd0001, 0, 0, 1},
852 .needs_tvaudio = 0,
853 .pll = PLL_28,
854 .tuner_type = -1,
855 },{
856
857 /* ---- card 0x28 ---------------------------------- */
858 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
859 .video_inputs = 3,
860 .audio_inputs = 1,
861 .tuner = 0,
862 .svhs = 2,
863 .gpiomask = 7,
864 .muxsel = { 2, 3, 1, 1},
865 .audiomux = { 4, 0, 2, 3, 1},
866 .no_msp34xx = 1,
867 .needs_tvaudio = 1,
868 .tuner_type = TUNER_PHILIPS_NTSC,
869 .pll = PLL_28,
870 .has_radio = 1,
871 },{
872 .name = "AVerMedia TVPhone 98",
873 .video_inputs = 3,
874 .audio_inputs = 4,
875 .tuner = 0,
876 .svhs = 2,
877 .gpiomask = 15,
878 .muxsel = { 2, 3, 1, 1},
879 .audiomux = { 13, 4, 11, 7, 0, 0},
880 .needs_tvaudio = 1,
881 .pll = PLL_28,
882 .tuner_type = -1,
883 .has_radio = 1,
884 .audio_hook = avermedia_tvphone_audio,
885 },{
886 .name = "ProVideo PV951", /* pic16c54 */
887 .video_inputs = 3,
888 .audio_inputs = 1,
889 .tuner = 0,
890 .svhs = 2,
891 .gpiomask = 0,
892 .muxsel = { 2, 3, 1, 1},
893 .audiomux = { 0, 0, 0, 0, 0},
894 .needs_tvaudio = 1,
895 .no_msp34xx = 1,
896 .pll = PLL_28,
897 .tuner_type = 1,
898 },{
899 .name = "Little OnAir TV",
900 .video_inputs = 3,
901 .audio_inputs = 1,
902 .tuner = 0,
903 .svhs = 2,
904 .gpiomask = 0xe00b,
905 .muxsel = {2, 3, 1, 1},
906 .audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
907 .no_msp34xx = 1,
908 .tuner_type = -1,
909 },{
910
911 /* ---- card 0x2c ---------------------------------- */
912 .name = "Sigma TVII-FM",
913 .video_inputs = 2,
914 .audio_inputs = 1,
915 .tuner = 0,
916 .svhs = -1,
917 .gpiomask = 3,
918 .muxsel = {2, 3, 1, 1},
919 .audiomux = {1, 1, 0, 2, 3},
920 .no_msp34xx = 1,
921 .pll = PLL_NONE,
922 .tuner_type = -1,
923 },{
924 .name = "MATRIX-Vision MV-Delta 2",
925 .video_inputs = 5,
926 .audio_inputs = 1,
927 .tuner = -1,
928 .svhs = 3,
929 .gpiomask = 0,
930 .muxsel = { 2, 3, 1, 0, 0},
931 .audiomux = {0 },
932 .no_msp34xx = 1,
933 .pll = PLL_28,
934 .tuner_type = -1,
935 },{
936 .name = "Zoltrix Genie TV/FM",
937 .video_inputs = 3,
938 .audio_inputs = 1,
939 .tuner = 0,
940 .svhs = 2,
941 .gpiomask = 0xbcf03f,
942 .muxsel = { 2, 3, 1, 1},
943 .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
944 .no_msp34xx = 1,
945 .pll = PLL_28,
946 .tuner_type = 21,
947 },{
948 .name = "Terratec TV/Radio+",
949 .video_inputs = 3,
950 .audio_inputs = 1,
951 .tuner = 0,
952 .svhs = 2,
953 .gpiomask = 0x70000,
954 .muxsel = { 2, 3, 1, 1},
955 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
956 .needs_tvaudio = 1,
957 .no_msp34xx = 1,
958 .pll = PLL_35,
959 .tuner_type = 1,
960 .has_radio = 1,
961 },{
962
963 /* ---- card 0x30 ---------------------------------- */
964 .name = "Askey CPH03x/ Dynalink Magic TView",
965 .video_inputs = 3,
966 .audio_inputs = 1,
967 .tuner = 0,
968 .svhs = 2,
969 .gpiomask = 15,
970 .muxsel = { 2, 3, 1, 1},
971 .audiomux = {2,0,0,0,1},
972 .needs_tvaudio = 1,
973 .pll = PLL_28,
974 .tuner_type = -1,
975 },{
976 .name = "IODATA GV-BCTV3/PCI",
977 .video_inputs = 3,
978 .audio_inputs = 1,
979 .tuner = 0,
980 .svhs = 2,
981 .gpiomask = 0x010f00,
982 .muxsel = {2, 3, 0, 0},
983 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
984 .no_msp34xx = 1,
985 .pll = PLL_28,
986 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
987 .audio_hook = gvbctv3pci_audio,
988 },{
989 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
990 .video_inputs = 5,
991 .audio_inputs = 1,
992 .tuner = 0,
993 .svhs = 3,
994 .gpiomask = 0xAA0000,
995 .muxsel = { 2,3,1,1,-1 },
996 .digital_mode = DIGITAL_MODE_CAMERA,
997 .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
998 .no_msp34xx = 1,
999 .pll = PLL_28,
1000 .tuner_type = TUNER_PHILIPS_PAL_I,
1001 .has_remote = 1,
1002 /* GPIO wiring: (different from Rev.4C !)
1003 GPIO17: U4.A0 (first hef4052bt)
1004 GPIO19: U4.A1
1005 GPIO20: U5.A1 (second hef4052bt)
1006 GPIO21: U4.nEN
1007 GPIO22: BT832 Reset Line
1008 GPIO23: A5,A0, U5,nEN
1009 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1010 */
1011 },{
1012 .name = "Eagle Wireless Capricorn2 (bt878A)",
1013 .video_inputs = 4,
1014 .audio_inputs = 1,
1015 .tuner = 0,
1016 .svhs = 2,
1017 .gpiomask = 7,
1018 .muxsel = { 2, 0, 1, 1},
1019 .audiomux = { 0, 1, 2, 3, 4},
1020 .pll = PLL_28,
1021 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1022 },{
1023
1024 /* ---- card 0x34 ---------------------------------- */
1025 /* David Härdeman <david@2gen.com> */
1026 .name = "Pinnacle PCTV Studio Pro",
1027 .video_inputs = 4,
1028 .audio_inputs = 1,
1029 .tuner = 0,
1030 .svhs = 3,
1031 .gpiomask = 0x03000F,
1032 .muxsel = { 2, 3, 1, 1},
1033 .audiomux = { 1, 0xd0001, 0, 0, 10},
1034 /* sound path (5 sources):
1035 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1036 0= ext. Audio IN
1037 1= from MUX2
1038 2= Mono TV sound from Tuner
1039 3= not connected
1040 MUX2 (mask 0x30000):
1041 0,2,3= from MSP34xx
1042 1= FM stereo Radio from Tuner */
1043 .needs_tvaudio = 0,
1044 .pll = PLL_28,
1045 .tuner_type = -1,
1046 },{
1047 /* Claas Langbehn <claas@bigfoot.com>,
1048 Sven Grothklags <sven@upb.de> */
1049 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1050 .video_inputs = 4,
1051 .audio_inputs = 3,
1052 .tuner = 0,
1053 .svhs = 2,
1054 .gpiomask = 0x1c,
1055 .muxsel = { 2, 3, 1, 1},
1056 .audiomux = { 0, 0, 0x10, 8, 4 },
1057 .needs_tvaudio = 1,
1058 .pll = PLL_28,
1059 .tuner_type = TUNER_PHILIPS_PAL,
1060 .has_radio = 1,
1061 },{
1062 /* Tim Röstermundt <rosterm@uni-muenster.de>
1063 in de.comp.os.unix.linux.hardware:
1064 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1065 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1066 options tuner type=5 */
1067 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1068 .video_inputs = 4,
1069 .audio_inputs = 1,
1070 .tuner = 0,
1071 .svhs = 2,
1072 .gpiomask = 0x18e0,
1073 .muxsel = { 2, 3, 1, 1},
1074 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1075 /* For cards with tda9820/tda9821:
1076 0x0000: Tuner normal stereo
1077 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1078 0x0880: Tuner A2 stereo */
1079 .pll = PLL_28,
1080 .tuner_type = -1,
1081 },{
1082 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1083 old Easy TV BT848 version (model CPH031) */
1084 .name = "Askey CPH031/ BESTBUY Easy TV",
1085 .video_inputs = 4,
1086 .audio_inputs = 1,
1087 .tuner = 0,
1088 .svhs = 2,
1089 .gpiomask = 0xF,
1090 .muxsel = { 2, 3, 1, 0},
1091 .audiomux = { 2, 0, 0, 0, 10},
1092 .needs_tvaudio = 0,
1093 .pll = PLL_28,
1094 .tuner_type = TUNER_TEMIC_PAL,
1095 },{
1096
1097 /* ---- card 0x38 ---------------------------------- */
1098 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1099 .name = "Lifeview FlyVideo 98FM LR50",
1100 .video_inputs = 4,
1101 .audio_inputs = 3,
1102 .tuner = 0,
1103 .svhs = 2,
1104 .gpiomask = 0x1800,
1105 .muxsel = { 2, 3, 1, 1},
1106 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1107 .pll = PLL_28,
1108 .tuner_type = 5,
1109 },{
1110 /* This is the ultimate cheapo capture card
1111 * just a BT848A on a small PCB!
1112 * Steve Hosgood <steve@equiinet.com> */
1113 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1114 .video_inputs = 2,
1115 .audio_inputs = 0,
1116 .tuner = -1,
1117 .svhs = 1,
1118 .gpiomask = 0,
1119 .muxsel = { 3, 1 },
1120 .audiomux = { 0 },
1121 .needs_tvaudio = 0,
1122 .no_msp34xx = 1,
1123 .pll = PLL_35,
1124 .tuner_type = -1,
1125 },{
1126 /* Daniel Herrington <daniel.herrington@home.com> */
1127 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1128 .video_inputs = 3,
1129 .audio_inputs = 1,
1130 .tuner = 0,
1131 .svhs = 2,
1132 .gpiomask = 0xe00,
1133 .muxsel = { 2, 3, 1, 1},
1134 .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1135 .needs_tvaudio = 1,
1136 .pll = PLL_28,
1137 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1138 },{
1139 /* Matti Mottus <mottus@physic.ut.ee> */
1140 .name = "Askey CPH03x TV Capturer",
1141 .video_inputs = 4,
1142 .audio_inputs = 1,
1143 .tuner = 0,
1144 .svhs = 2,
1145 .gpiomask = 0x03000F,
1146 .muxsel = { 2, 3, 1, 0},
1147 .audiomux = { 2,0,0,0,1 },
1148 .pll = PLL_28,
1149 .tuner_type = 0,
1150 },{
1151
1152 /* ---- card 0x3c ---------------------------------- */
1153 /* Philip Blundell <philb@gnu.org> */
1154 .name = "Modular Technology MM100PCTV",
1155 .video_inputs = 2,
1156 .audio_inputs = 2,
1157 .tuner = 0,
1158 .svhs = -1,
1159 .gpiomask = 11,
1160 .muxsel = { 2, 3, 1, 1},
1161 .audiomux = { 2, 0, 0, 1, 8},
1162 .pll = PLL_35,
1163 .tuner_type = TUNER_TEMIC_PAL,
1164
1165 },{
1166 /* Adrian Cox <adrian@humboldt.co.uk */
1167 .name = "AG Electronics GMV1",
1168 .video_inputs = 2,
1169 .audio_inputs = 0,
1170 .tuner = -1,
1171 .svhs = 1,
1172 .gpiomask = 0xF,
1173 .muxsel = { 2, 2},
1174 .audiomux = { },
1175 .no_msp34xx = 1,
1176 .needs_tvaudio = 0,
1177 .pll = PLL_28,
1178 .tuner_type = -1,
1179 },{
1180 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1181 new Easy TV BT878 version (model CPH061)
1182 special thanks to Informatica Mieres for providing the card */
1183 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1184 .video_inputs = 3,
1185 .audio_inputs = 2,
1186 .tuner = 0,
1187 .svhs = 2,
1188 .gpiomask = 0xFF,
1189 .muxsel = { 2, 3, 1, 0},
1190 .audiomux = { 1, 0, 4, 4, 9},
1191 .needs_tvaudio = 0,
1192 .pll = PLL_28,
1193 .tuner_type = TUNER_PHILIPS_PAL,
1194 },{
1195 /* Lukas Gebauer <geby@volny.cz> */
1196 .name = "ATI TV-Wonder",
1197 .video_inputs = 3,
1198 .audio_inputs = 1,
1199 .tuner = 0,
1200 .svhs = 2,
1201 .gpiomask = 0xf03f,
1202 .muxsel = { 2, 3, 1, 0 },
1203 .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1204 .pll = PLL_28,
1205 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1206 },{
1207
1208 /* ---- card 0x40 ---------------------------------- */
1209 /* Lukas Gebauer <geby@volny.cz> */
1210 .name = "ATI TV-Wonder VE",
1211 .video_inputs = 2,
1212 .audio_inputs = 1,
1213 .tuner = 0,
1214 .svhs = -1,
1215 .gpiomask = 1,
1216 .muxsel = { 2, 3, 0, 1},
1217 .audiomux = { 0, 0, 1, 0, 0},
1218 .no_msp34xx = 1,
1219 .pll = PLL_28,
1220 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1221 },{
1222 /* DeeJay <deejay@westel900.net (2000S) */
1223 .name = "Lifeview FlyVideo 2000S LR90",
1224 .video_inputs = 3,
1225 .audio_inputs = 3,
1226 .tuner = 0,
1227 .svhs = 2,
1228 .gpiomask = 0x18e0,
1229 .muxsel = { 2, 3, 0, 1},
1230 /* Radio changed from 1e80 to 0x800 to make
1231 FlyVideo2000S in .hu happy (gm)*/
1232 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1233 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1234 .audio_hook = fv2000s_audio,
1235 .no_msp34xx = 1,
1236 .no_tda9875 = 1,
1237 .needs_tvaudio = 1,
1238 .pll = PLL_28,
1239 .tuner_type = 5,
1240 },{
1241 .name = "Terratec TValueRadio",
1242 .video_inputs = 3,
1243 .audio_inputs = 1,
1244 .tuner = 0,
1245 .svhs = 2,
1246 .gpiomask = 0xffff00,
1247 .muxsel = { 2, 3, 1, 1},
1248 .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
1249 .needs_tvaudio = 1,
1250 .pll = PLL_28,
1251 .tuner_type = TUNER_PHILIPS_PAL,
1252 .has_radio = 1,
1253 },{
1254 /* TANAKA Kei <peg00625@nifty.com> */
1255 .name = "IODATA GV-BCTV4/PCI",
1256 .video_inputs = 3,
1257 .audio_inputs = 1,
1258 .tuner = 0,
1259 .svhs = 2,
1260 .gpiomask = 0x010f00,
1261 .muxsel = {2, 3, 0, 0},
1262 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
1263 .no_msp34xx = 1,
1264 .pll = PLL_28,
1265 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1266 .audio_hook = gvbctv3pci_audio,
1267 },{
1268
1269 /* ---- card 0x44 ---------------------------------- */
1270 .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1271 // try "insmod msp3400 simple=0" if you have
1272 // sound problems with this card.
1273 .video_inputs = 4,
1274 .audio_inputs = 1,
1275 .tuner = 0,
1276 .svhs = -1,
1277 .gpiomask = 0x4f8a00,
1278 // 0x100000: 1=MSP enabled (0=disable again)
1279 // 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
1280 .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1281 // tvtuner, radio, external,internal, mute, stereo
1282 /* tuner, Composit, SVid, Composit-on-Svid-adapter*/
1283 .muxsel = { 2, 3 ,0 ,1},
1284 .tuner_type = TUNER_MT2032,
1285 .pll = PLL_28,
1286 .has_radio = 1,
1287 },{
1288 /* Philip Blundell <pb@nexus.co.uk> */
1289 .name = "Active Imaging AIMMS",
1290 .video_inputs = 1,
1291 .audio_inputs = 0,
1292 .tuner = -1,
1293 .tuner_type = -1,
1294 .pll = PLL_28,
1295 .muxsel = { 2 },
1296 .gpiomask = 0
1297 },{
1298 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1299 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1300 .video_inputs = 3,
1301 .audio_inputs = 4,
1302 .tuner = 0,
1303 .svhs = 2,
1304 .gpiomask = 15,
1305 .muxsel = { 2, 3, 1, 1},
1306 .audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
1307 .needs_tvaudio = 1,
1308 .pll = PLL_28,
1309 .tuner_type = 25,
1310 .has_remote = 1,
1311 /* GPIO wiring:
1312 GPIO0: U4.A0 (hef4052bt)
1313 GPIO1: U4.A1
1314 GPIO2: U4.A1 (second hef4052bt)
1315 GPIO3: U4.nEN, U5.A0, A5.nEN
1316 GPIO8-15: vrd866b ?
1317 */
1318 },{
1319 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1320 .video_inputs = 4,
1321 .audio_inputs = 0,
1322 .tuner = -1,
1323 .svhs = 2,
1324 .muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
1325 .pll = PLL_28,
1326 .no_msp34xx = 1,
1327 },{
1328
1329 /* ---- card 0x48 ---------------------------------- */
1330 /* Dariusz Kowalewski <darekk@automex.pl> */
1331 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1332 .video_inputs = 4,
1333 .audio_inputs = 1,
1334 .tuner = 0,
1335 .svhs = 2,
1336 .gpiomask = 0x3f,
1337 .muxsel = { 2, 3, 1, 1 },
1338 .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1339 .needs_tvaudio = 1,
1340 .no_msp34xx = 1,
1341 .no_tda9875 = 1,
1342 .pll = PLL_28,
1343 .tuner_type = 5,
1344 .audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
1345 .has_radio = 1, // Note: not all cards have radio
1346 .has_remote = 1,
1347 /* GPIO wiring:
1348 GPIO0: A0 hef4052
1349 GPIO1: A1 hef4052
1350 GPIO3: nEN hef4052
1351 GPIO8-15: vrd866b
1352 GPIO20,22,23: R30,R29,R28
1353 */
1354 },{
1355 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1356 /* you must jumper JP5 for the card to work */
1357 .name = "Sensoray 311",
1358 .video_inputs = 5,
1359 .audio_inputs = 0,
1360 .tuner = -1,
1361 .svhs = 4,
1362 .gpiomask = 0,
1363 .muxsel = { 2, 3, 1, 0, 0},
1364 .audiomux = { 0 },
1365 .needs_tvaudio = 0,
1366 .tuner_type = -1,
1367 },{
1368 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1369 .name = "RemoteVision MX (RV605)",
1370 .video_inputs = 16,
1371 .audio_inputs = 0,
1372 .tuner = -1,
1373 .svhs = -1,
1374 .gpiomask = 0x00,
1375 .gpiomask2 = 0x07ff,
1376 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1377 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1378 .no_msp34xx = 1,
1379 .no_tda9875 = 1,
1380 .tuner_type = -1,
1381 .muxsel_hook = rv605_muxsel,
1382 },{
1383 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1384 .video_inputs = 3,
1385 .audio_inputs = 2,
1386 .tuner = 0,
1387 .svhs = 2,
1388 .gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
1389 .muxsel = { 2, 1, 1, },
1390 .audiomux = { 0, 1, 2, 2, 4 },
1391 .needs_tvaudio = 0,
1392 .tuner_type = TUNER_PHILIPS_PAL,
1393 .pll = PLL_28,
1394 .has_radio = 1,
1395 },{
1396
1397 /* ---- card 0x4c ---------------------------------- */
1398 /* Masaki Suzuki <masaki@btree.org> */
1399 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1400 .video_inputs = 3,
1401 .audio_inputs = 1,
1402 .tuner = 0,
1403 .svhs = 2,
1404 .gpiomask = 0x140007,
1405 .muxsel = { 2, 3, 1, 1 },
1406 .audiomux = { 0, 1, 2, 3, 4, 0 },
1407 .tuner_type = TUNER_PHILIPS_NTSC,
1408 .audio_hook = windvr_audio,
1409 },{
1410 .name = "GrandTec Multi Capture Card (Bt878)",
1411 .video_inputs = 4,
1412 .audio_inputs = 0,
1413 .tuner = -1,
1414 .svhs = -1,
1415 .gpiomask = 0,
1416 .muxsel = { 2, 3, 1, 0 },
1417 .audiomux = { 0 },
1418 .needs_tvaudio = 0,
1419 .no_msp34xx = 1,
1420 .pll = PLL_28,
1421 .tuner_type = -1,
1422 },{
1423 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1424 .video_inputs = 4,
1425 .audio_inputs = 3,
1426 .tuner = 0,
1427 .svhs = 2,
1428 .gpiomask = 7,
1429 .muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
1430 .audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
1431 // This card lacks external Audio In, so we mute it on Ext. & Int.
1432 // The PCB can take a sbx1637/sbx1673, wiring unknown.
1433 // This card lacks PCI subsystem ID, sigh.
1434 // audiomux=1: lower volume, 2+3: mute
1435 // btwincap uses 0x80000/0x80003
1436 .needs_tvaudio = 0,
1437 .no_msp34xx = 1,
1438 .pll = PLL_28,
1439 .tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1440 // radio signal strength indicators work fine.
1441 .has_radio = 1,
1442 /* GPIO Info:
1443 GPIO0,1: HEF4052 A0,A1
1444 GPIO2: HEF4052 nENABLE
1445 GPIO3-7: n.c.
1446 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1447 GPIO14,15: ??
1448 GPIO16-21: n.c.
1449 GPIO22,23: ??
1450 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1451 },{
1452 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1453 .name = "DSP Design TCVIDEO",
1454 .video_inputs = 4,
1455 .svhs = -1,
1456 .muxsel = { 2, 3, 1, 0},
1457 .pll = PLL_28,
1458 .tuner_type = -1,
1459 },{
1460
1461 /* ---- card 0x50 ---------------------------------- */
1462 .name = "Hauppauge WinTV PVR",
1463 .video_inputs = 4,
1464 .audio_inputs = 1,
1465 .tuner = 0,
1466 .svhs = 2,
1467 .muxsel = { 2, 0, 1, 1},
1468 .needs_tvaudio = 1,
1469 .pll = PLL_28,
1470 .tuner_type = -1,
1471
1472 .gpiomask = 7,
1473 .audiomux = {7},
1474 },{
1475 .name = "IODATA GV-BCTV5/PCI",
1476 .video_inputs = 3,
1477 .audio_inputs = 1,
1478 .tuner = 0,
1479 .svhs = 2,
1480 .gpiomask = 0x0f0f80,
1481 .muxsel = {2, 3, 1, 0},
1482 .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
1483 .no_msp34xx = 1,
1484 .pll = PLL_28,
1485 .tuner_type = TUNER_PHILIPS_NTSC_M,
1486 .audio_hook = gvbctv5pci_audio,
1487 .has_radio = 1,
1488 },{
1489 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1490 .video_inputs = 4, /* id-inputs-clock */
1491 .audio_inputs = 0,
1492 .tuner = -1,
1493 .svhs = 3,
1494 .muxsel = { 3, 2, 0, 1 },
1495 .pll = PLL_28,
1496 .tuner_type = -1,
1497 .no_msp34xx = 1,
1498 .no_tda9875 = 1,
1499 .no_tda7432 = 1,
1500 },{
1501 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1502 .video_inputs = 3,
1503 .audio_inputs = 0,
1504 .tuner = -1,
1505 .svhs = 2,
1506 .muxsel = { 2, 3, 1 },
1507 .pll = PLL_28,
1508 .tuner_type = -1,
1509 .no_msp34xx = 1,
1510 .no_tda9875 = 1,
1511 .no_tda7432 = 1,
1512 },{
1513
1514 /* ---- card 0x54 ---------------------------------- */
1515 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1516 .video_inputs = 2,
1517 .audio_inputs = 0,
1518 .tuner = -1,
1519 .svhs = 1,
1520 .muxsel = { 3, 1 },
1521 .pll = PLL_28,
1522 .tuner_type = -1,
1523 .no_msp34xx = 1,
1524 .no_tda9875 = 1,
1525 .no_tda7432 = 1,
1526 },{
1527 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1528 .video_inputs = 1,
1529 .audio_inputs = 0,
1530 .tuner = -1,
1531 .svhs = -1,
1532 .muxsel = { 0 },
1533 .pll = PLL_28,
1534 .tuner_type = -1,
1535 .no_msp34xx = 1,
1536 .no_tda9875 = 1,
1537 .no_tda7432 = 1,
1538 },{
1539 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1540 .video_inputs = 2,
1541 .audio_inputs = 0,
1542 .tuner = -1,
1543 .svhs = 1,
1544 .muxsel = { 0, 1 },
1545 .pll = PLL_28,
1546 .tuner_type = -1,
1547 .no_msp34xx = 1,
1548 .no_tda9875 = 1,
1549 .no_tda7432 = 1,
1550 },{
1551 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1552 .video_inputs = 1,
1553 .audio_inputs = 1,
1554 .tuner = -1,
1555 .svhs = -1,
1556 .muxsel = { 0 },
1557 .pll = PLL_28,
1558 .tuner_type = -1,
1559 .no_msp34xx = 1,
1560 .no_tda9875 = 1,
1561 .no_tda7432 = 1,
1562 },{
1563
1564 /* ---- card 0x58 ---------------------------------- */
1565 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1566 .video_inputs = 2,
1567 .audio_inputs = 1,
1568 .tuner = -1,
1569 .svhs = 1,
1570 .muxsel = { 0, 1 },
1571 .pll = PLL_28,
1572 .tuner_type = -1,
1573 .no_msp34xx = 1,
1574 .no_tda9875 = 1,
1575 .no_tda7432 = 1,
1576 },{
1577 .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1578 .video_inputs = 2,
1579 .audio_inputs = 1,
1580 .tuner = -1,
1581 .svhs = 1,
1582 .muxsel = { 2, 3 },
1583 .pll = PLL_28,
1584 .tuner_type = -1,
1585 .no_msp34xx = 1,
1586 .no_tda9875 = 1,
1587 .no_tda7432 = 1,
1588 },{
1589 .name = "Osprey 500", /* 500 */
1590 .video_inputs = 2,
1591 .audio_inputs = 1,
1592 .tuner = -1,
1593 .svhs = 1,
1594 .muxsel = { 2, 3 },
1595 .pll = PLL_28,
1596 .tuner_type = -1,
1597 .no_msp34xx = 1,
1598 .no_tda9875 = 1,
1599 .no_tda7432 = 1,
1600 },{
1601 .name = "Osprey 540", /* 540 */
1602 .video_inputs = 4,
1603 .audio_inputs = 1,
1604 .tuner = -1,
1605 #if 0 /* TODO ... */
1606 .svhs = OSPREY540_SVID_ANALOG,
1607 .muxsel = { [OSPREY540_COMP_ANALOG] = 2,
1608 [OSPREY540_SVID_ANALOG] = 3, },
1609 #endif
1610 .pll = PLL_28,
1611 .tuner_type = -1,
1612 .no_msp34xx = 1,
1613 .no_tda9875 = 1,
1614 .no_tda7432 = 1,
1615 #if 0 /* TODO ... */
1616 .muxsel_hook = osprey_540_muxsel,
1617 .picture_hook = osprey_540_set_picture,
1618 #endif
1619 },{
1620
1621 /* ---- card 0x5C ---------------------------------- */
1622 .name = "Osprey 2000", /* 2000 */
1623 .video_inputs = 2,
1624 .audio_inputs = 1,
1625 .tuner = -1,
1626 .svhs = 1,
1627 .muxsel = { 2, 3 },
1628 .pll = PLL_28,
1629 .tuner_type = -1,
1630 .no_msp34xx = 1,
1631 .no_tda9875 = 1,
1632 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1633 },{
1634 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1635 .name = "IDS Eagle",
1636 .video_inputs = 4,
1637 .audio_inputs = 0,
1638 .tuner = -1,
1639 .tuner_type = -1,
1640 .svhs = -1,
1641 .gpiomask = 0,
1642 .muxsel = { 0, 1, 2, 3 },
1643 .muxsel_hook = eagle_muxsel,
1644 .no_msp34xx = 1,
1645 .no_tda9875 = 1,
1646 .pll = PLL_28,
1647 },{
1648 .name = "Pinnacle PCTV Sat",
1649 .video_inputs = 2,
1650 .audio_inputs = 0,
1651 .svhs = 1,
1652 .tuner = -1,
1653 .tuner_type = -1,
1654 .no_msp34xx = 1,
1655 .no_tda9875 = 1,
1656 .no_tda7432 = 1,
1657 .gpiomask = 0x01,
1658 .audiomux = { 0, 0, 0, 0, 1 },
1659 .muxsel = { 3, 0, 1, 2},
1660 .needs_tvaudio = 0,
1661 .pll = PLL_28,
1662 .no_gpioirq = 1,
1663 .has_dvb = 1,
1664 },{
1665 .name = "Formac ProTV II (bt878)",
1666 .video_inputs = 4,
1667 .audio_inputs = 1,
1668 .tuner = 0,
1669 .svhs = 3,
1670 .gpiomask = 2,
1671 // TV, Comp1, Composite over SVID con, SVID
1672 .muxsel = { 2, 3, 1, 1},
1673 .audiomux = { 2, 2, 0, 0, 0 },
1674 .pll = PLL_28,
1675 .has_radio = 1,
1676 .tuner_type = TUNER_PHILIPS_PAL,
1677 /* sound routing:
1678 GPIO=0x00,0x01,0x03: mute (?)
1679 0x02: both TV and radio (tuner: FM1216/I)
1680 The card has onboard audio connectors labeled "cdrom" and "board",
1681 not soldered here, though unknown wiring.
1682 Card lacks: external audio in, pci subsystem id.
1683 */
1684 },{
1685
1686 /* ---- card 0x60 ---------------------------------- */
1687 .name = "MachTV",
1688 .video_inputs = 3,
1689 .audio_inputs = 1,
1690 .tuner = 0,
1691 .svhs = -1,
1692 .gpiomask = 7,
1693 .muxsel = { 2, 3, 1, 1},
1694 .audiomux = { 0, 1, 2, 3, 4},
1695 .needs_tvaudio = 1,
1696 .tuner_type = 5,
1697 .pll = 1,
1698 },{
1699 .name = "Euresys Picolo",
1700 .video_inputs = 3,
1701 .audio_inputs = 0,
1702 .tuner = -1,
1703 .svhs = 2,
1704 .gpiomask = 0,
1705 .no_msp34xx = 1,
1706 .no_tda9875 = 1,
1707 .no_tda7432 = 1,
1708 .muxsel = { 2, 0, 1},
1709 .pll = PLL_28,
1710 },{
1711 /* Luc Van Hoeylandt <luc@e-magic.be> */
1712 .name = "ProVideo PV150", /* 0x4f */
1713 .video_inputs = 2,
1714 .audio_inputs = 0,
1715 .tuner = -1,
1716 .svhs = -1,
1717 .gpiomask = 0,
1718 .muxsel = { 2, 3 },
1719 .audiomux = { 0 },
1720 .needs_tvaudio = 0,
1721 .no_msp34xx = 1,
1722 .pll = PLL_28,
1723 .tuner_type = -1,
1724 },{
1725 /* Hiroshi Takekawa <sian@big.or.jp> */
1726 /* This card lacks subsystem ID */
1727 .name = "AD-TVK503", /* 0x63 */
1728 .video_inputs = 4,
1729 .audio_inputs = 1,
1730 .tuner = 0,
1731 .svhs = 2,
1732 .gpiomask = 0x001e8007,
1733 .muxsel = { 2, 3, 1, 0 },
1734 /* Tuner, Radio, external, internal, off, on */
1735 .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
1736 .needs_tvaudio = 0,
1737 .no_msp34xx = 1,
1738 .pll = PLL_28,
1739 .tuner_type = 2,
1740 .audio_hook = adtvk503_audio,
1741 },{
1742
1743 /* ---- card 0x64 ---------------------------------- */
1744 .name = "Hercules Smart TV Stereo",
1745 .video_inputs = 4,
1746 .audio_inputs = 1,
1747 .tuner = 0,
1748 .svhs = 2,
1749 .gpiomask = 0x00,
1750 .muxsel = { 2, 3, 1, 1 },
1751 .needs_tvaudio = 1,
1752 .no_msp34xx = 1,
1753 .pll = PLL_28,
1754 .tuner_type = 5,
1755 /* Notes:
1756 - card lacks subsystem ID
1757 - stereo variant w/ daughter board with tda9874a @0xb0
1758 - Audio Routing:
1759 always from tda9874 independent of GPIO (?)
1760 external line in: unknown
1761 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1762 hef4053 (instead 4052) for unknown function
1763 */
1764 },{
1765 .name = "Pace TV & Radio Card",
1766 .video_inputs = 4,
1767 .audio_inputs = 1,
1768 .tuner = 0,
1769 .svhs = 2,
1770 .muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
1771 .gpiomask = 0,
1772 .no_tda9875 = 1,
1773 .no_tda7432 = 1,
1774 .tuner_type = 1,
1775 .has_radio = 1,
1776 .pll = PLL_28,
1777 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1778 only internal line out: (4pin header) RGGL
1779 Radio must be decoded by msp3410d (not routed through)*/
1780 // .digital_mode = DIGITAL_MODE_CAMERA, // todo!
1781 },{
1782 /* Chris Willing <chris@vislab.usyd.edu.au> */
1783 .name = "IVC-200",
1784 .video_inputs = 1,
1785 .audio_inputs = 0,
1786 .tuner = -1,
1787 .tuner_type = -1,
1788 .svhs = -1,
1789 .gpiomask = 0xdf,
1790 .muxsel = { 2 },
1791 .pll = PLL_28,
1792 },{
1793 .name = "Grand X-Guard / Trust 814PCI",
1794 .video_inputs = 16,
1795 .audio_inputs = 0,
1796 .tuner = -1,
1797 .svhs = -1,
1798 .tuner_type = 4,
1799 .gpiomask2 = 0xff,
1800 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
1801 .muxsel_hook = xguard_muxsel,
1802 .no_msp34xx = 1,
1803 .no_tda9875 = 1,
1804 .no_tda7432 = 1,
1805 .pll = PLL_28,
1806 },{
1807
1808 /* ---- card 0x68 ---------------------------------- */
1809 .name = "Nebula Electronics DigiTV",
1810 .video_inputs = 1,
1811 .tuner = -1,
1812 .svhs = -1,
1813 .muxsel = { 2, 3, 1, 0},
1814 .no_msp34xx = 1,
1815 .no_tda9875 = 1,
1816 .no_tda7432 = 1,
1817 .pll = PLL_28,
1818 .tuner_type = -1,
1819 .has_dvb = 1,
1820 .no_gpioirq = 1,
1821 },{
1822 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1823 .name = "ProVideo PV143",
1824 .video_inputs = 4,
1825 .audio_inputs = 0,
1826 .tuner = -1,
1827 .svhs = -1,
1828 .gpiomask = 0,
1829 .muxsel = { 2, 3, 1, 0 },
1830 .audiomux = { 0 },
1831 .needs_tvaudio = 0,
1832 .no_msp34xx = 1,
1833 .pll = PLL_28,
1834 .tuner_type = -1,
1835 },{
1836 /* M.Klahr@phytec.de */
1837 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
1838 .video_inputs = 4,
1839 .audio_inputs = 0,
1840 .tuner = -1, /* card has no tuner */
1841 .svhs = 3,
1842 .gpiomask = 0x00,
1843 .muxsel = { 2, 3, 1, 0},
1844 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1845 .needs_tvaudio = 1,
1846 .pll = PLL_28,
1847 .tuner_type = -1,
1848 },{
1849 .name = "PHYTEC VD-009-X1 Combi (bt878)",
1850 .video_inputs = 4,
1851 .audio_inputs = 0,
1852 .tuner = -1, /* card has no tuner */
1853 .svhs = 3,
1854 .gpiomask = 0x00,
1855 .muxsel = { 2, 3, 1, 1},
1856 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1857 .needs_tvaudio = 1,
1858 .pll = PLL_28,
1859 .tuner_type = -1,
1860 },{
1861
1862 /* ---- card 0x6c ---------------------------------- */
1863 .name = "PHYTEC VD-009 MiniDIN (bt878)",
1864 .video_inputs = 10,
1865 .audio_inputs = 0,
1866 .tuner = -1, /* card has no tuner */
1867 .svhs = 9,
1868 .gpiomask = 0x00,
1869 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1870 via the upper nibble of muxsel. here: used for
1871 xternal video-mux */
1872 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
1873 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1874 .needs_tvaudio = 1,
1875 .pll = PLL_28,
1876 .tuner_type = -1,
1877 },{
1878 .name = "PHYTEC VD-009 Combi (bt878)",
1879 .video_inputs = 10,
1880 .audio_inputs = 0,
1881 .tuner = -1, /* card has no tuner */
1882 .svhs = 9,
1883 .gpiomask = 0x00,
1884 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1885 via the upper nibble of muxsel. here: used for
1886 xternal video-mux */
1887 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
1888 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1889 .needs_tvaudio = 1,
1890 .pll = PLL_28,
1891 .tuner_type = -1,
1892 },{
1893 .name = "IVC-100",
1894 .video_inputs = 4,
1895 .audio_inputs = 0,
1896 .tuner = -1,
1897 .tuner_type = -1,
1898 .svhs = -1,
1899 .gpiomask = 0xdf,
1900 .muxsel = { 2, 3, 1, 0 },
1901 .pll = PLL_28,
1902 },{
1903 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
1904 .name = "IVC-120G",
1905 .video_inputs = 16,
1906 .audio_inputs = 0, /* card has no audio */
1907 .tuner = -1, /* card has no tuner */
1908 .tuner_type = -1,
1909 .svhs = -1, /* card has no svhs */
1910 .needs_tvaudio = 0,
1911 .no_msp34xx = 1,
1912 .no_tda9875 = 1,
1913 .no_tda7432 = 1,
1914 .gpiomask = 0x00,
1915 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
1916 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
1917 .muxsel_hook = ivc120_muxsel,
1918 .pll = PLL_28,
1919 },{
1920
1921 /* ---- card 0x70 ---------------------------------- */
1922 .name = "pcHDTV HD-2000 TV",
1923 .video_inputs = 4,
1924 .audio_inputs = 1,
1925 .tuner = 0,
1926 .svhs = 2,
1927 .muxsel = { 2, 3, 1, 0},
1928 .tuner_type = TUNER_PHILIPS_ATSC,
1929 .has_dvb = 1,
1930 },{
1931 .name = "Twinhan DST + clones",
1932 .no_msp34xx = 1,
1933 .no_tda9875 = 1,
1934 .no_tda7432 = 1,
1935 .tuner_type = TUNER_ABSENT,
1936 .no_video = 1,
1937 .has_dvb = 1,
1938 },{
1939 .name = "Winfast VC100",
1940 .video_inputs = 3,
1941 .audio_inputs = 0,
1942 .svhs = 1,
1943 .tuner = -1, // no tuner
1944 .muxsel = { 3, 1, 1, 3}, // Vid In, SVid In, Vid over SVid in connector
1945 .no_msp34xx = 1,
1946 .no_tda9875 = 1,
1947 .no_tda7432 = 1,
1948 .tuner_type = TUNER_ABSENT,
1949 .pll = PLL_28,
1950 },{
1951 .name = "Teppro TEV-560/InterVision IV-560",
1952 .video_inputs = 3,
1953 .audio_inputs = 1,
1954 .tuner = 0,
1955 .svhs = 2,
1956 .gpiomask = 3,
1957 .muxsel = { 2, 3, 1, 1},
1958 .audiomux = { 1, 1, 1, 1, 0},
1959 .needs_tvaudio = 1,
1960 .tuner_type = TUNER_PHILIPS_PAL,
1961 .pll = PLL_35,
1962 },{
1963
1964 /* ---- card 0x74 ---------------------------------- */
1965 .name = "SIMUS GVC1100",
1966 .video_inputs = 4,
1967 .audio_inputs = 0,
1968 .tuner = -1,
1969 .svhs = -1,
1970 .tuner_type = -1,
1971 .pll = PLL_28,
1972 .muxsel = { 2, 2, 2, 2},
1973 .gpiomask = 0x3F,
1974 .muxsel_hook = gvc1100_muxsel,
1975 },{
1976 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
1977 .name = "NGS NGSTV+",
1978 .video_inputs = 3,
1979 .tuner = 0,
1980 .svhs = 2,
1981 .gpiomask = 0x008007,
1982 .muxsel = {2, 3, 0, 0},
1983 .audiomux = {0, 0, 0, 0, 0x000003, 0},
1984 .pll = PLL_28,
1985 .tuner_type = TUNER_PHILIPS_PAL,
1986 .has_remote = 1,
1987 },{
1988 /* http://linuxmedialabs.com */
1989 .name = "LMLBT4",
1990 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
1991 .audio_inputs = 0,
1992 .tuner = -1,
1993 .svhs = -1,
1994 .muxsel = { 2, 3, 1, 0 },
1995 .no_msp34xx = 1,
1996 .no_tda9875 = 1,
1997 .no_tda7432 = 1,
1998 .needs_tvaudio = 0,
1999 },{
2000 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2001 .name = "Tekram M205 PRO",
2002 .video_inputs = 3,
2003 .audio_inputs = 1,
2004 .tuner = 0,
2005 .tuner_type = TUNER_PHILIPS_PAL,
2006 .svhs = 2,
2007 .needs_tvaudio = 0,
2008 .gpiomask = 0x68,
2009 .muxsel = { 2, 3, 1},
2010 .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 },
2011 .pll = PLL_28,
2012 },{
2013
2014 /* ---- card 0x78 ---------------------------------- */
2015 /* Javier Cendan Ares <jcendan@lycos.es> */
2016 /* bt878 TV + FM without subsystem ID */
2017 .name = "Conceptronic CONTVFMi",
2018 .video_inputs = 3,
2019 .audio_inputs = 1,
2020 .tuner = 0,
2021 .svhs = 2,
2022 .gpiomask = 0x008007,
2023 .muxsel = { 2, 3, 1, 1 },
2024 .audiomux = { 0, 1, 2, 2, 3 },
2025 .needs_tvaudio = 0,
2026 .pll = PLL_28,
2027 .tuner_type = TUNER_PHILIPS_PAL,
2028 .has_remote = 1,
2029 .has_radio = 1,
2030 },{
2031 /*Eric DEBIEF <debief@telemsa.com>*/
2032 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2033 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/
2034 /*0x79 in bttv.h*/
2035 .name = "Euresys Picolo Tetra",
2036 .video_inputs = 4,
2037 .audio_inputs = 0,
2038 .tuner = -1,
2039 .svhs = -1,
2040 .gpiomask = 0,
2041 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2042 .no_msp34xx = 1,
2043 .no_tda9875 = 1,
2044 .no_tda7432 = 1,
2045 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2046 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2047 .pll = PLL_28,
2048 .needs_tvaudio = 0,
2049 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2050 },{
2051 /* Spirit TV Tuner from http://spiritmodems.com.au */
2052 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2053 .name = "Spirit TV Tuner",
2054 .video_inputs = 3,
2055 .audio_inputs = 1,
2056 .tuner = 0,
2057 .svhs = 2,
2058 .gpiomask = 0x0000000f,
2059 .muxsel = { 2, 1, 1 },
2060 .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00},
2061 .tuner_type = TUNER_TEMIC_PAL,
2062 .no_msp34xx = 1,
2063 .no_tda9875 = 1,
2064 },{
2065 /* Wolfram Joost <wojo@frokaschwei.de> */
2066 .name = "AVerMedia AVerTV DVB-T 771",
2067 .video_inputs = 2,
2068 .svhs = 1,
2069 .tuner = -1,
2070 .tuner_type = TUNER_ABSENT,
2071 .muxsel = { 3 , 3 },
2072 .no_msp34xx = 1,
2073 .no_tda9875 = 1,
2074 .no_tda7432 = 1,
2075 .pll = PLL_28,
2076 .has_dvb = 1,
2077 .no_gpioirq = 1,
2078 .has_remote = 1,
2079 },{
2080 /* ---- card 0x7c ---------------------------------- */
2081 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2082 /* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */
2083 .name = "AverMedia AverTV DVB-T 761",
2084 .video_inputs = 2,
2085 .tuner = -1,
2086 .svhs = 1,
2087 .muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2088 .no_msp34xx = 1,
2089 .no_tda9875 = 1,
2090 .no_tda7432 = 1,
2091 .pll = PLL_28,
2092 .tuner_type = -1,
2093 .has_dvb = 1,
2094 .no_gpioirq = 1,
2095 .has_remote = 1,
2096 },{
2097 /* andre.schwarz@matrix-vision.de */
2098 .name = "MATRIX Vision Sigma-SQ",
2099 .video_inputs = 16,
2100 .audio_inputs = 0,
2101 .tuner = -1,
2102 .svhs = -1,
2103 .gpiomask = 0x0,
2104 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2105 3, 3, 3, 3, 3, 3, 3, 3 },
2106 .muxsel_hook = sigmaSQ_muxsel,
2107 .audiomux = { 0 },
2108 .no_msp34xx = 1,
2109 .pll = PLL_28,
2110 .tuner_type = -1,
2111 },{
2112 /* andre.schwarz@matrix-vision.de */
2113 .name = "MATRIX Vision Sigma-SLC",
2114 .video_inputs = 4,
2115 .audio_inputs = 0,
2116 .tuner = -1,
2117 .svhs = -1,
2118 .gpiomask = 0x0,
2119 .muxsel = { 2, 2, 2, 2 },
2120 .muxsel_hook = sigmaSLC_muxsel,
2121 .audiomux = { 0 },
2122 .no_msp34xx = 1,
2123 .pll = PLL_28,
2124 .tuner_type = -1,
2125 },{
2126 /* BTTV_APAC_VIEWCOMP */
2127 /* Attila Kondoros <attila.kondoros@chello.hu> */
2128 /* bt878 TV + FM 0x00000000 subsystem ID */
2129 .name = "APAC Viewcomp 878(AMAX)",
2130 .video_inputs = 2,
2131 .audio_inputs = 1,
2132 .tuner = 0,
2133 .svhs = -1,
2134 .gpiomask = 0xFF,
2135 .muxsel = { 2, 3, 1, 1},
2136 .audiomux = { 2, 0, 0, 0, 10},
2137 .needs_tvaudio = 0,
2138 .pll = PLL_28,
2139 .tuner_type = TUNER_PHILIPS_PAL,
2140 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2141 .has_radio = 1, /* not every card has radio */
2142 },{
2143
2144 /* ---- card 0x80 ---------------------------------- */
2145 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2146 .name = "DVICO FusionHDTV DVB-T Lite",
2147 .tuner = -1,
2148 .no_msp34xx = 1,
2149 .no_tda9875 = 1,
2150 .no_tda7432 = 1,
2151 .pll = PLL_28,
2152 .no_video = 1,
2153 .has_dvb = 1,
2154 .tuner_type = -1,
2155 },{
2156 /* Steven <photon38@pchome.com.tw> */
2157 .name = "V-Gear MyVCD",
2158 .video_inputs = 3,
2159 .audio_inputs = 1,
2160 .tuner = 0,
2161 .svhs = 2,
2162 .gpiomask = 0x3f,
2163 .muxsel = {2, 3, 1, 0},
2164 .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2165 .no_msp34xx = 1,
2166 .pll = PLL_28,
2167 .tuner_type = TUNER_PHILIPS_NTSC_M,
2168 .has_radio = 0,
2169 // .has_remote = 1,
2170 },{
2171 /* Rick C <cryptdragoon@gmail.com> */
2172 .name = "Super TV Tuner",
2173 .video_inputs = 4,
2174 .audio_inputs = 1,
2175 .tuner = 0,
2176 .svhs = 2,
2177 .muxsel = { 2, 3, 1, 0},
2178 .tuner_type = TUNER_PHILIPS_NTSC,
2179 .gpiomask = 0x008007,
2180 .audiomux = { 0, 0x000001,0,0, 0},
2181 .needs_tvaudio = 1,
2182 .has_radio = 1,
2183 },{
2184 /* Chris Fanning <video4linux@haydon.net> */
2185 .name = "Tibet Systems 'Progress DVR' CS16",
2186 .video_inputs = 16,
2187 .audio_inputs = 0,
2188 .tuner = -1,
2189 .svhs = -1,
2190 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2191 .pll = PLL_28,
2192 .no_msp34xx = 1,
2193 .no_tda9875 = 1,
2194 .no_tda7432 = 1,
2195 .tuner_type = -1,
2196 .muxsel_hook = tibetCS16_muxsel,
2197 },
2198 {
2199 /* Bill Brack <wbrack@mmm.com.hk> */
2200 /*
2201 * Note that, because of the card's wiring, the "master"
2202 * BT878A chip (i.e. the one which controls the analog switch
2203 * and must use this card type) is the 2nd one detected. The
2204 * other 3 chips should use card type 0x85, whose description
2205 * follows this one. There is a EEPROM on the card (which is
2206 * connected to the I2C of one of those other chips), but is
2207 * not currently handled. There is also a facility for a
2208 * "monitor", which is also not currently implemented.
2209 */
2210 .name = "Kodicom 4400R (master)",
2211 .video_inputs = 16,
2212 .audio_inputs = 0,
2213 .tuner = -1,
2214 .tuner_type = -1,
2215 .svhs = -1,
2216 /* GPIO bits 0-9 used for analog switch:
2217 * 00 - 03: camera selector
2218 * 04 - 06: channel (controller) selector
2219 * 07: data (1->on, 0->off)
2220 * 08: strobe
2221 * 09: reset
2222 * bit 16 is input from sync separator for the channel
2223 */
2224 .gpiomask = 0x0003ff,
2225 .no_gpioirq = 1,
2226 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2227 .pll = PLL_28,
2228 .no_msp34xx = 1,
2229 .no_tda7432 = 1,
2230 .no_tda9875 = 1,
2231 .muxsel_hook = kodicom4400r_muxsel,
2232 },
2233 {
2234 /* Bill Brack <wbrack@mmm.com.hk> */
2235 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2236 * one which controls the analog switch, and must use the card type)
2237 * is the 2nd one detected. The other 3 chips should use this card
2238 * type
2239 */
2240 .name = "Kodicom 4400R (slave)",
2241 .video_inputs = 16,
2242 .audio_inputs = 0,
2243 .tuner = -1,
2244 .tuner_type = -1,
2245 .svhs = -1,
2246 .gpiomask = 0x010000,
2247 .no_gpioirq = 1,
2248 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2249 .pll = PLL_28,
2250 .no_msp34xx = 1,
2251 .no_tda7432 = 1,
2252 .no_tda9875 = 1,
2253 .muxsel_hook = kodicom4400r_muxsel,
2254 }};
2255
2256 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2257
2258 /* ----------------------------------------------------------------------- */
2259
2260 static unsigned char eeprom_data[256];
2261
2262 /*
2263 * identify card
2264 */
2265 void __devinit bttv_idcard(struct bttv *btv)
2266 {
2267 unsigned int gpiobits;
2268 int i,type;
2269 unsigned short tmp;
2270
2271 /* read PCI subsystem ID */
2272 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2273 btv->cardid = tmp << 16;
2274 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2275 btv->cardid |= tmp;
2276
2277 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2278 /* look for the card */
2279 for (type = -1, i = 0; cards[i].id != 0; i++)
2280 if (cards[i].id == btv->cardid)
2281 type = i;
2282
2283 if (type != -1) {
2284 /* found it */
2285 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2286 "PCI subsystem ID is %04x:%04x\n",
2287 btv->c.nr,cards[type].name,cards[type].cardnr,
2288 btv->cardid & 0xffff,
2289 (btv->cardid >> 16) & 0xffff);
2290 btv->c.type = cards[type].cardnr;
2291 } else {
2292 /* 404 */
2293 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2294 btv->c.nr, btv->cardid & 0xffff,
2295 (btv->cardid >> 16) & 0xffff);
2296 printk(KERN_DEBUG "please mail id, board name and "
2297 "the correct card= insmod option to kraxel@bytesex.org\n");
2298 }
2299 }
2300
2301 /* let the user override the autodetected type */
2302 if (card[btv->c.nr] < bttv_num_tvcards)
2303 btv->c.type=card[btv->c.nr];
2304
2305 /* print which card config we are using */
2306 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2307 bttv_tvcards[btv->c.type].name, btv->c.type,
2308 card[btv->c.nr] < bttv_num_tvcards
2309 ? "insmod option" : "autodetected");
2310
2311 /* overwrite gpio stuff ?? */
2312 if (UNSET == audioall && UNSET == audiomux[0])
2313 return;
2314
2315 if (UNSET != audiomux[0]) {
2316 gpiobits = 0;
2317 for (i = 0; i < 5; i++) {
2318 bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
2319 gpiobits |= audiomux[i];
2320 }
2321 } else {
2322 gpiobits = audioall;
2323 for (i = 0; i < 5; i++) {
2324 bttv_tvcards[btv->c.type].audiomux[i] = audioall;
2325 }
2326 }
2327 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2328 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2329 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2330 for (i = 0; i < 5; i++) {
2331 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
2332 }
2333 printk("\n");
2334 }
2335
2336 /*
2337 * (most) board specific initialisations goes here
2338 */
2339
2340 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2341 void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2342 {
2343 int type = -1;
2344
2345 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2346 type = BTTV_MODTEC_205;
2347 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2348 type = BTTV_EURESYS_PICOLO;
2349 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2350 type = BTTV_HAUPPAUGE; /* old bt848 */
2351
2352 if (-1 != type) {
2353 btv->c.type = type;
2354 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2355 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2356 }
2357 }
2358
2359 static void flyvideo_gpio(struct bttv *btv)
2360 {
2361 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
2362 int tuner=-1,ttype;
2363
2364 gpio_inout(0xffffff, 0);
2365 udelay(8); // without this we would see the 0x1800 mask
2366 gpio = gpio_read();
2367 /* FIXME: must restore OUR_EN ??? */
2368
2369 // all cards provide GPIO info, some have an additional eeprom
2370 // LR50: GPIO coding can be found lower right CP1 .. CP9
2371 // CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2372 // GPIO14-12: n.c.
2373 // LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2374
2375 // lowest 3 bytes are remote control codes (no handshake needed)
2376 // xxxFFF: No remote control chip soldered
2377 // xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2378 // Note: Some bits are Audio_Mask !
2379
2380 ttype=(gpio&0x0f0000)>>16;
2381 switch(ttype) {
2382 case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
2383 break;
2384 case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
2385 break;
2386 case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
2387 break;
2388 case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
2389 break;
2390 case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
2391 break;
2392 default:
2393 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
2394 }
2395
2396 has_remote = gpio & 0x800000;
2397 has_radio = gpio & 0x400000;
2398 // unknown 0x200000;
2399 // unknown2 0x100000;
2400 is_capture_only = !(gpio & 0x008000); //GPIO15
2401 has_tda9820_tda9821 = !(gpio & 0x004000);
2402 is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
2403 // gpio & 0x001000 // output bit for audio routing
2404
2405 if(is_capture_only)
2406 tuner=4; // No tuner present
2407
2408 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2409 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
2410 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2411 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
2412 is_capture_only?"yes":"no ");
2413
2414 if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
2415 btv->tuner_type = tuner;
2416 btv->has_radio = has_radio;
2417
2418 // LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2419 // LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2420 // Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
2421 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
2422 //todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
2423 }
2424
2425 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
2426 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
2427 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
2428 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
2429
2430 static void miro_pinnacle_gpio(struct bttv *btv)
2431 {
2432 int id,msp,gpio;
2433 char *info;
2434
2435 gpio_inout(0xffffff, 0);
2436 gpio = gpio_read();
2437 id = ((gpio>>10) & 63) -1;
2438 msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
2439 if (id < 32) {
2440 btv->tuner_type = miro_tunermap[id];
2441 if (0 == (gpio & 0x20)) {
2442 btv->has_radio = 1;
2443 if (!miro_fmtuner[id]) {
2444 btv->has_matchbox = 1;
2445 btv->mbox_we = (1<<6);
2446 btv->mbox_most = (1<<7);
2447 btv->mbox_clk = (1<<8);
2448 btv->mbox_data = (1<<9);
2449 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
2450 }
2451 } else {
2452 btv->has_radio = 0;
2453 }
2454 if (-1 != msp) {
2455 if (btv->c.type == BTTV_MIRO)
2456 btv->c.type = BTTV_MIROPRO;
2457 if (btv->c.type == BTTV_PINNACLE)
2458 btv->c.type = BTTV_PINNACLEPRO;
2459 }
2460 printk(KERN_INFO
2461 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
2462 btv->c.nr, id+1, btv->tuner_type,
2463 !btv->has_radio ? "no" :
2464 (btv->has_matchbox ? "matchbox" : "fmtuner"),
2465 (-1 == msp) ? "no" : "yes");
2466 } else {
2467 /* new cards with microtune tuner */
2468 id = 63 - id;
2469 btv->has_radio = 0;
2470 switch (id) {
2471 case 1:
2472 info = "PAL / mono";
2473 break;
2474 case 2:
2475 info = "PAL+SECAM / stereo";
2476 btv->has_radio = 1;
2477 break;
2478 case 3:
2479 info = "NTSC / stereo";
2480 btv->has_radio = 1;
2481 break;
2482 case 4:
2483 info = "PAL+SECAM / mono";
2484 break;
2485 case 5:
2486 info = "NTSC / mono";
2487 break;
2488 case 6:
2489 info = "NTSC / stereo";
2490 break;
2491 case 7:
2492 info = "PAL / stereo";
2493 break;
2494 default:
2495 info = "oops: unknown card";
2496 break;
2497 }
2498 if (-1 != msp)
2499 btv->c.type = BTTV_PINNACLEPRO;
2500 printk(KERN_INFO
2501 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
2502 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
2503 btv->tuner_type = 33;
2504 btv->pinnacle_id = id;
2505 }
2506 }
2507
2508 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
2509 #define LM1882_SYNC_DRIVE 0x200000L
2510
2511 static void init_ids_eagle(struct bttv *btv)
2512 {
2513 gpio_inout(0xffffff,0xFFFF37);
2514 gpio_write(0x200020);
2515
2516 /* flash strobe inverter ?! */
2517 gpio_write(0x200024);
2518
2519 /* switch sync drive off */
2520 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2521
2522 /* set BT848 muxel to 2 */
2523 btaor((2)<<5, ~(2<<5), BT848_IFORM);
2524 }
2525
2526 /* Muxsel helper for the IDS Eagle.
2527 * the eagles does not use the standard muxsel-bits but
2528 * has its own multiplexer */
2529 static void eagle_muxsel(struct bttv *btv, unsigned int input)
2530 {
2531 btaor((2)<<5, ~(3<<5), BT848_IFORM);
2532 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
2533
2534 #if 0
2535 /* svhs */
2536 /* wake chroma ADC */
2537 btand(~BT848_ADC_C_SLEEP, BT848_ADC);
2538 /* set to YC video */
2539 btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
2540 btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
2541 #else
2542 /* composite */
2543 /* set chroma ADC to sleep */
2544 btor(BT848_ADC_C_SLEEP, BT848_ADC);
2545 /* set to composite video */
2546 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
2547 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
2548 #endif
2549
2550 /* switch sync drive off */
2551 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2552 }
2553
2554 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
2555 {
2556 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
2557 gpio_write(masks[input%4]);
2558 }
2559
2560 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
2561 alarms output
2562
2563 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
2564 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
2565
2566 IN - sensor inputs, INx - sensor inputs and TI XORed together
2567 O1,O2,O3 - alarm outputs (relays)
2568
2569 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
2570
2571 */
2572
2573 static void init_lmlbt4x(struct bttv *btv)
2574 {
2575 printk(KERN_DEBUG "LMLBT4x init\n");
2576 btwrite(0x000000, BT848_GPIO_REG_INP);
2577 gpio_inout(0xffffff, 0x0006C0);
2578 gpio_write(0x000000);
2579 }
2580
2581 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
2582 {
2583 unsigned int inmux = input % 8;
2584 gpio_inout( 0xf, 0xf );
2585 gpio_bits( 0xf, inmux );
2586 }
2587
2588 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
2589 {
2590 unsigned int inmux = input % 4;
2591 gpio_inout( 3<<9, 3<<9 );
2592 gpio_bits( 3<<9, inmux<<9 );
2593 }
2594
2595 /* ----------------------------------------------------------------------- */
2596
2597 static void bttv_reset_audio(struct bttv *btv)
2598 {
2599 /*
2600 * BT878A has a audio-reset register.
2601 * 1. This register is an audio reset function but it is in
2602 * function-0 (video capture) address space.
2603 * 2. It is enough to do this once per power-up of the card.
2604 * 3. There is a typo in the Conexant doc -- it is not at
2605 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
2606 * --//Shrikumar 030609
2607 */
2608 if (btv->id != 878)
2609 return;
2610
2611 if (bttv_debug)
2612 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
2613 btwrite((1<<7), 0x058);
2614 udelay(10);
2615 btwrite( 0, 0x058);
2616 }
2617
2618 /* initialization part one -- before registering i2c bus */
2619 void __devinit bttv_init_card1(struct bttv *btv)
2620 {
2621 switch (btv->c.type) {
2622 case BTTV_HAUPPAUGE:
2623 case BTTV_HAUPPAUGE878:
2624 boot_msp34xx(btv,5);
2625 break;
2626 case BTTV_VOODOOTV_FM:
2627 boot_msp34xx(btv,20);
2628 break;
2629 case BTTV_AVERMEDIA98:
2630 boot_msp34xx(btv,11);
2631 break;
2632 case BTTV_HAUPPAUGEPVR:
2633 pvr_boot(btv);
2634 break;
2635 case BTTV_TWINHAN_DST:
2636 case BTTV_AVDVBT_771:
2637 btv->use_i2c_hw = 1;
2638 break;
2639 }
2640 if (!bttv_tvcards[btv->c.type].has_dvb)
2641 bttv_reset_audio(btv);
2642 }
2643
2644 /* initialization part two -- after registering i2c bus */
2645 void __devinit bttv_init_card2(struct bttv *btv)
2646 {
2647 int tda9887;
2648 btv->tuner_type = -1;
2649
2650 if (BTTV_UNKNOWN == btv->c.type) {
2651 bttv_readee(btv,eeprom_data,0xa0);
2652 identify_by_eeprom(btv,eeprom_data);
2653 }
2654
2655 switch (btv->c.type) {
2656 case BTTV_MIRO:
2657 case BTTV_MIROPRO:
2658 case BTTV_PINNACLE:
2659 case BTTV_PINNACLEPRO:
2660 /* miro/pinnacle */
2661 miro_pinnacle_gpio(btv);
2662 break;
2663 case BTTV_FLYVIDEO_98:
2664 case BTTV_MAXI:
2665 case BTTV_LIFE_FLYKIT:
2666 case BTTV_FLYVIDEO:
2667 case BTTV_TYPHOON_TVIEW:
2668 case BTTV_CHRONOS_VS2:
2669 case BTTV_FLYVIDEO_98FM:
2670 case BTTV_FLYVIDEO2000:
2671 case BTTV_FLYVIDEO98EZ:
2672 case BTTV_CONFERENCETV:
2673 case BTTV_LIFETEC_9415:
2674 flyvideo_gpio(btv);
2675 break;
2676 case BTTV_HAUPPAUGE:
2677 case BTTV_HAUPPAUGE878:
2678 case BTTV_HAUPPAUGEPVR:
2679 /* pick up some config infos from the eeprom */
2680 bttv_readee(btv,eeprom_data,0xa0);
2681 hauppauge_eeprom(btv);
2682 break;
2683 case BTTV_AVERMEDIA98:
2684 case BTTV_AVPHONE98:
2685 bttv_readee(btv,eeprom_data,0xa0);
2686 avermedia_eeprom(btv);
2687 break;
2688 case BTTV_PXC200:
2689 init_PXC200(btv);
2690 break;
2691 case BTTV_PICOLO_TETRA_CHIP:
2692 picolo_tetra_init(btv);
2693 break;
2694 case BTTV_VHX:
2695 btv->has_radio = 1;
2696 btv->has_matchbox = 1;
2697 btv->mbox_we = 0x20;
2698 btv->mbox_most = 0;
2699 btv->mbox_clk = 0x08;
2700 btv->mbox_data = 0x10;
2701 btv->mbox_mask = 0x38;
2702 break;
2703 case BTTV_VOBIS_BOOSTAR:
2704 case BTTV_TERRATV:
2705 terratec_active_radio_upgrade(btv);
2706 break;
2707 case BTTV_MAGICTVIEW061:
2708 if (btv->cardid == 0x3002144f) {
2709 btv->has_radio=1;
2710 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
2711 }
2712 break;
2713 case BTTV_STB2:
2714 if (btv->cardid == 0x3060121a) {
2715 /* Fix up entry for 3DFX VoodooTV 100,
2716 which is an OEM STB card variant. */
2717 btv->has_radio=0;
2718 btv->tuner_type=TUNER_TEMIC_NTSC;
2719 }
2720 break;
2721 case BTTV_OSPREY1x0:
2722 case BTTV_OSPREY1x0_848:
2723 case BTTV_OSPREY101_848:
2724 case BTTV_OSPREY1x1:
2725 case BTTV_OSPREY1x1_SVID:
2726 case BTTV_OSPREY2xx:
2727 case BTTV_OSPREY2x0_SVID:
2728 case BTTV_OSPREY2x0:
2729 case BTTV_OSPREY500:
2730 case BTTV_OSPREY540:
2731 case BTTV_OSPREY2000:
2732 bttv_readee(btv,eeprom_data,0xa0);
2733 osprey_eeprom(btv);
2734 break;
2735 case BTTV_IDS_EAGLE:
2736 init_ids_eagle(btv);
2737 break;
2738 case BTTV_MODTEC_205:
2739 bttv_readee(btv,eeprom_data,0xa0);
2740 modtec_eeprom(btv);
2741 break;
2742 case BTTV_LMLBT4:
2743 init_lmlbt4x(btv);
2744 break;
2745 case BTTV_TIBET_CS16:
2746 tibetCS16_init(btv);
2747 break;
2748 case BTTV_KODICOM_4400R:
2749 kodicom4400r_init(btv);
2750 break;
2751 }
2752
2753 /* pll configuration */
2754 if (!(btv->id==848 && btv->revision==0x11)) {
2755 /* defaults from card list */
2756 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
2757 btv->pll.pll_ifreq=28636363;
2758 btv->pll.pll_crystal=BT848_IFORM_XT0;
2759 }
2760 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
2761 btv->pll.pll_ifreq=35468950;
2762 btv->pll.pll_crystal=BT848_IFORM_XT1;
2763 }
2764 /* insmod options can override */
2765 switch (pll[btv->c.nr]) {
2766 case 0: /* none */
2767 btv->pll.pll_crystal = 0;
2768 btv->pll.pll_ifreq = 0;
2769 btv->pll.pll_ofreq = 0;
2770 break;
2771 case 1: /* 28 MHz */
2772 case 28:
2773 btv->pll.pll_ifreq = 28636363;
2774 btv->pll.pll_ofreq = 0;
2775 btv->pll.pll_crystal = BT848_IFORM_XT0;
2776 break;
2777 case 2: /* 35 MHz */
2778 case 35:
2779 btv->pll.pll_ifreq = 35468950;
2780 btv->pll.pll_ofreq = 0;
2781 btv->pll.pll_crystal = BT848_IFORM_XT1;
2782 break;
2783 }
2784 }
2785 btv->pll.pll_current = -1;
2786
2787 /* tuner configuration (from card list / autodetect / insmod option) */
2788 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
2789 if(UNSET == btv->tuner_type)
2790 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
2791 if (UNSET != tuner[btv->c.nr])
2792 btv->tuner_type = tuner[btv->c.nr];
2793 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
2794 if (btv->pinnacle_id != UNSET)
2795 bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
2796 &btv->pinnacle_id);
2797 if (btv->tuner_type != UNSET)
2798 bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
2799 btv->svhs = bttv_tvcards[btv->c.type].svhs;
2800 if (svhs[btv->c.nr] != UNSET)
2801 btv->svhs = svhs[btv->c.nr];
2802 if (remote[btv->c.nr] != UNSET)
2803 btv->has_remote = remote[btv->c.nr];
2804
2805 if (bttv_tvcards[btv->c.type].has_radio)
2806 btv->has_radio=1;
2807 if (bttv_tvcards[btv->c.type].has_remote)
2808 btv->has_remote=1;
2809 if (bttv_tvcards[btv->c.type].no_gpioirq)
2810 btv->gpioirq=0;
2811 if (bttv_tvcards[btv->c.type].audio_hook)
2812 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
2813
2814 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
2815 /* detect Bt832 chip for quartzsight digital camera */
2816 if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
2817 (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
2818 boot_bt832(btv);
2819 }
2820
2821 if (!autoload)
2822 return;
2823
2824 /* try to detect audio/fader chips */
2825 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
2826 bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
2827 request_module("msp3400");
2828
2829 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
2830 bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
2831 request_module("msp3400");
2832
2833 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
2834 bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
2835 request_module("tda9875");
2836
2837 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
2838 bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
2839 request_module("tda7432");
2840
2841 if (bttv_tvcards[btv->c.type].needs_tvaudio)
2842 request_module("tvaudio");
2843
2844 /* tuner modules */
2845 tda9887 = 0;
2846 if (btv->pinnacle_id != UNSET)
2847 tda9887 = 1;
2848 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
2849 bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
2850 tda9887 = 1;
2851 if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
2852 (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
2853 (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
2854 tda9887)
2855 request_module("tda9887");
2856 if (btv->tuner_type != UNSET)
2857 request_module("tuner");
2858 }
2859
2860
2861 /* ----------------------------------------------------------------------- */
2862
2863 static void modtec_eeprom(struct bttv *btv)
2864 {
2865 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
2866 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
2867 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2868 btv->c.nr,&eeprom_data[0x1e]);
2869 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
2870 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
2871 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2872 btv->c.nr,&eeprom_data[0x1e]);
2873 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
2874 btv->tuner_type=TUNER_PHILIPS_NTSC;
2875 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2876 btv->c.nr,&eeprom_data[0x1e]);
2877 } else {
2878 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
2879 btv->c.nr,&eeprom_data[0x1e]);
2880 }
2881 }
2882
2883 static void __devinit hauppauge_eeprom(struct bttv *btv)
2884 {
2885 struct tveeprom tv;
2886
2887 tveeprom_hauppauge_analog(&tv, eeprom_data);
2888 btv->tuner_type = tv.tuner_type;
2889 btv->has_radio = tv.has_radio;
2890 }
2891
2892 static int terratec_active_radio_upgrade(struct bttv *btv)
2893 {
2894 int freq;
2895
2896 btv->has_radio = 1;
2897 btv->has_matchbox = 1;
2898 btv->mbox_we = 0x10;
2899 btv->mbox_most = 0x20;
2900 btv->mbox_clk = 0x08;
2901 btv->mbox_data = 0x04;
2902 btv->mbox_mask = 0x3c;
2903
2904 btv->mbox_iow = 1 << 8;
2905 btv->mbox_ior = 1 << 9;
2906 btv->mbox_csel = 1 << 10;
2907
2908 freq=88000/62.5;
2909 tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
2910 if (0x1ed8 == tea5757_read(btv)) {
2911 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
2912 btv->c.nr);
2913 btv->has_radio = 1;
2914 btv->has_matchbox = 1;
2915 } else {
2916 btv->has_radio = 0;
2917 btv->has_matchbox = 0;
2918 }
2919 return 0;
2920 }
2921
2922
2923 /* ----------------------------------------------------------------------- */
2924
2925 /*
2926 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
2927 *
2928 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
2929 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
2930 * unpacked with unzip).
2931 */
2932 #define PVR_GPIO_DELAY 10
2933
2934 #define BTTV_ALT_DATA 0x000001
2935 #define BTTV_ALT_DCLK 0x100000
2936 #define BTTV_ALT_NCONFIG 0x800000
2937
2938 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
2939 {
2940 u32 n;
2941 u8 bits;
2942 int i;
2943
2944 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
2945 gpio_write(0);
2946 udelay(PVR_GPIO_DELAY);
2947
2948 gpio_write(BTTV_ALT_NCONFIG);
2949 udelay(PVR_GPIO_DELAY);
2950
2951 for (n = 0; n < microlen; n++) {
2952 bits = micro[n];
2953 for ( i = 0 ; i < 8 ; i++ ) {
2954 gpio_bits(BTTV_ALT_DCLK,0);
2955 if (bits & 0x01)
2956 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
2957 else
2958 gpio_bits(BTTV_ALT_DATA,0);
2959 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2960 bits >>= 1;
2961 }
2962 }
2963 gpio_bits(BTTV_ALT_DCLK,0);
2964 udelay(PVR_GPIO_DELAY);
2965
2966 /* begin Altera init loop (Not necessary,but doesn't hurt) */
2967 for (i = 0 ; i < 30 ; i++) {
2968 gpio_bits(BTTV_ALT_DCLK,0);
2969 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2970 }
2971 gpio_bits(BTTV_ALT_DCLK,0);
2972 return 0;
2973 }
2974
2975 static int __devinit pvr_boot(struct bttv *btv)
2976 {
2977 const struct firmware *fw_entry;
2978 int rc;
2979
2980 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
2981 if (rc != 0) {
2982 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
2983 btv->c.nr);
2984 return rc;
2985 }
2986 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
2987 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
2988 btv->c.nr, (rc < 0) ? "failed" : "ok");
2989 release_firmware(fw_entry);
2990 return rc;
2991 }
2992
2993 /* ----------------------------------------------------------------------- */
2994 /* some osprey specific stuff */
2995
2996 static void __devinit osprey_eeprom(struct bttv *btv)
2997 {
2998 int i = 0;
2999 unsigned char *ee = eeprom_data;
3000 unsigned long serial = 0;
3001
3002 if (btv->c.type == 0) {
3003 /* this might be an antique... check for MMAC label in eeprom */
3004 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3005 unsigned char checksum = 0;
3006 for (i =0; i<21; i++)
3007 checksum += ee[i];
3008 if (checksum != ee[21])
3009 return;
3010 btv->c.type = BTTV_OSPREY1x0_848;
3011 for (i = 12; i < 21; i++)
3012 serial *= 10, serial += ee[i] - '0';
3013 }
3014 } else {
3015 unsigned short type;
3016 int offset = 4*16;
3017
3018 for(; offset < 8*16; offset += 16) {
3019 unsigned short checksum = 0;
3020 /* verify the checksum */
3021 for(i = 0; i<14; i++) checksum += ee[i+offset];
3022 checksum = ~checksum; /* no idea why */
3023 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3024 ((checksum & 0x0FF) == ee[offset+15])) {
3025 break;
3026 }
3027 }
3028
3029 if (offset >= 8*16)
3030 return;
3031
3032 /* found a valid descriptor */
3033 type = (ee[offset+4]<<8) | (ee[offset+5]);
3034
3035 switch(type) {
3036
3037 /* 848 based */
3038 case 0x0004:
3039 btv->c.type = BTTV_OSPREY1x0_848;
3040 break;
3041 case 0x0005:
3042 btv->c.type = BTTV_OSPREY101_848;
3043 break;
3044
3045 /* 878 based */
3046 case 0x0012:
3047 case 0x0013:
3048 btv->c.type = BTTV_OSPREY1x0;
3049 break;
3050 case 0x0014:
3051 case 0x0015:
3052 btv->c.type = BTTV_OSPREY1x1;
3053 break;
3054 case 0x0016:
3055 case 0x0017:
3056 case 0x0020:
3057 btv->c.type = BTTV_OSPREY1x1_SVID;
3058 break;
3059 case 0x0018:
3060 case 0x0019:
3061 case 0x001E:
3062 case 0x001F:
3063 btv->c.type = BTTV_OSPREY2xx;
3064 break;
3065 case 0x001A:
3066 case 0x001B:
3067 btv->c.type = BTTV_OSPREY2x0_SVID;
3068 break;
3069 case 0x0040:
3070 btv->c.type = BTTV_OSPREY500;
3071 break;
3072 case 0x0050:
3073 case 0x0056:
3074 btv->c.type = BTTV_OSPREY540;
3075 /* bttv_osprey_540_init(btv); */
3076 break;
3077 case 0x0060:
3078 case 0x0070:
3079 btv->c.type = BTTV_OSPREY2x0;
3080 //enable output on select control lines
3081 gpio_inout(0xffffff,0x000303);
3082 break;
3083 default:
3084 /* unknown...leave generic, but get serial # */
3085 break;
3086 }
3087 serial = (ee[offset+6] << 24)
3088 | (ee[offset+7] << 16)
3089 | (ee[offset+8] << 8)
3090 | (ee[offset+9]);
3091 }
3092
3093 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3094 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3095 }
3096
3097 /* ----------------------------------------------------------------------- */
3098 /* AVermedia specific stuff, from bktr_card.c */
3099
3100 static int tuner_0_table[] = {
3101 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3102 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3103 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3104 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3105 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3106 TUNER_PHILIPS_FM1216ME_MK3 };
3107 #if 0
3108 int tuner_0_fm_table[] = {
3109 PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
3110 PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
3111 PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
3112 PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
3113 PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
3114 #endif
3115
3116 static int tuner_1_table[] = {
3117 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3118 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3119 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3120 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
3121 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3122
3123 static void __devinit avermedia_eeprom(struct bttv *btv)
3124 {
3125 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3126
3127 tuner_make = (eeprom_data[0x41] & 0x7);
3128 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3129 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3130 btv->has_remote = (eeprom_data[0x42] & 0x01);
3131
3132 if (tuner_make == 0 || tuner_make == 2)
3133 if(tuner_format <=0x0a)
3134 tuner = tuner_0_table[tuner_format];
3135 if (tuner_make == 1)
3136 if(tuner_format <=9)
3137 tuner = tuner_1_table[tuner_format];
3138
3139 if (tuner_make == 4)
3140 if(tuner_format == 0x09)
3141 tuner = TUNER_LG_NTSC_NEW_TAPC; // TAPC-G702P
3142
3143 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3144 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3145 if(tuner) {
3146 btv->tuner_type=tuner;
3147 printk("%d",tuner);
3148 } else
3149 printk("Unknown type");
3150 printk(" radio:%s remote control:%s\n",
3151 tuner_tv_fm ? "yes" : "no",
3152 btv->has_remote ? "yes" : "no");
3153 }
3154
3155 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3156 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3157 {
3158 // fix up our card entry
3159 if(norm==VIDEO_MODE_NTSC) {
3160 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
3161 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
3162 dprintk("bttv_tda9880_setnorm to NTSC\n");
3163 }
3164 else {
3165 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
3166 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
3167 dprintk("bttv_tda9880_setnorm to PAL\n");
3168 }
3169 // set GPIO according
3170 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3171 bttv_tvcards[btv->c.type].audiomux[btv->audio]);
3172 }
3173
3174
3175 /*
3176 * reset/enable the MSP on some Hauppauge cards
3177 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3178 *
3179 * Hauppauge: pin 5
3180 * Voodoo: pin 20
3181 */
3182 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3183 {
3184 int mask = (1 << pin);
3185
3186 gpio_inout(mask,mask);
3187 gpio_bits(mask,0);
3188 udelay(2500);
3189 gpio_bits(mask,mask);
3190
3191 if (bttv_gpio)
3192 bttv_gpio_tracking(btv,"msp34xx");
3193 if (bttv_verbose)
3194 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3195 "init [%d]\n", btv->c.nr, pin);
3196 }
3197
3198 static void __devinit boot_bt832(struct bttv *btv)
3199 {
3200 #if 0 /* not working yet */
3201 int resetbit=0;
3202
3203 switch (btv->c.type) {
3204 case BTTV_PXELVWPLTVPAK:
3205 resetbit = 0x400000;
3206 break;
3207 case BTTV_MODTEC_205:
3208 resetbit = 1<<9;
3209 break;
3210 default:
3211 BUG();
3212 }
3213
3214 request_module("bt832");
3215 bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
3216
3217 printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->c.nr,resetbit);
3218 gpio_write(0);
3219 gpio_inout(resetbit, resetbit);
3220 udelay(5);
3221 gpio_bits(resetbit, resetbit);
3222 udelay(5);
3223 gpio_bits(resetbit, 0);
3224 udelay(5);
3225
3226 // bt832 on pixelview changes from i2c 0x8a to 0x88 after
3227 // being reset as above. So we must follow by this:
3228 bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
3229 #endif
3230 }
3231
3232 /* ----------------------------------------------------------------------- */
3233 /* Imagenation L-Model PXC200 Framegrabber */
3234 /* This is basically the same procedure as
3235 * used by Alessandro Rubini in his pxc200
3236 * driver, but using BTTV functions */
3237
3238 static void __devinit init_PXC200(struct bttv *btv)
3239 {
3240 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3241 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3242 0x00 };
3243 unsigned int i;
3244 int tmp;
3245 u32 val;
3246
3247 /* Initialise GPIO-connevted stuff */
3248 gpio_inout(0xffffff, (1<<13));
3249 gpio_write(0);
3250 udelay(3);
3251 gpio_write(1<<13);
3252 /* GPIO inputs are pulled up, so no need to drive
3253 * reset pin any longer */
3254 gpio_bits(0xffffff, 0);
3255 if (bttv_gpio)
3256 bttv_gpio_tracking(btv,"pxc200");
3257
3258 /* we could/should try and reset/control the AD pots? but
3259 right now we simply turned off the crushing. Without
3260 this the AGC drifts drifts
3261 remember the EN is reverse logic -->
3262 setting BT848_ADC_AGC_EN disable the AGC
3263 tboult@eecs.lehigh.edu
3264 */
3265
3266 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3267
3268 /* Initialise MAX517 DAC */
3269 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3270 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3271
3272 /* Initialise 12C508 PIC */
3273 /* The I2CWrite and I2CRead commmands are actually to the
3274 * same chips - but the R/W bit is included in the address
3275 * argument so the numbers are different */
3276
3277
3278 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3279
3280 /* First of all, enable the clock line. This is used in the PXC200-F */
3281 val = btread(BT848_GPIO_DMA_CTL);
3282 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3283 btwrite(val, BT848_GPIO_DMA_CTL);
3284
3285 /* Then, push to 0 the reset pin long enough to reset the *
3286 * device same as above for the reset line, but not the same
3287 * value sent to the GPIO-connected stuff
3288 * which one is the good one? */
3289 gpio_inout(0xffffff,(1<<2));
3290 gpio_write(0);
3291 udelay(10);
3292 gpio_write(1<<2);
3293
3294 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3295 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3296 if (tmp != -1) {
3297 printk(KERN_INFO
3298 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3299 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3300 }
3301 }
3302
3303 printk(KERN_INFO "PXC200 Initialised.\n");
3304 }
3305
3306
3307 /* ----------------------------------------------------------------------- */
3308 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3309 /*
3310 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3311 * This code is placed under the terms of the GNU General Public License
3312 *
3313 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3314 */
3315
3316 static void bus_low(struct bttv *btv, int bit)
3317 {
3318 if (btv->mbox_ior) {
3319 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3320 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3321 udelay(5);
3322 }
3323
3324 gpio_bits(bit,0);
3325 udelay(5);
3326
3327 if (btv->mbox_ior) {
3328 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3329 udelay(5);
3330 }
3331 }
3332
3333 static void bus_high(struct bttv *btv, int bit)
3334 {
3335 if (btv->mbox_ior) {
3336 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3337 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3338 udelay(5);
3339 }
3340
3341 gpio_bits(bit,bit);
3342 udelay(5);
3343
3344 if (btv->mbox_ior) {
3345 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3346 udelay(5);
3347 }
3348 }
3349
3350 static int bus_in(struct bttv *btv, int bit)
3351 {
3352 if (btv->mbox_ior) {
3353 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3354 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3355 udelay(5);
3356
3357 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3358 udelay(5);
3359 }
3360 return gpio_read() & (bit);
3361 }
3362
3363 /* TEA5757 register bits */
3364 #define TEA_FREQ 0:14
3365 #define TEA_BUFFER 15:15
3366
3367 #define TEA_SIGNAL_STRENGTH 16:17
3368
3369 #define TEA_PORT1 18:18
3370 #define TEA_PORT0 19:19
3371
3372 #define TEA_BAND 20:21
3373 #define TEA_BAND_FM 0
3374 #define TEA_BAND_MW 1
3375 #define TEA_BAND_LW 2
3376 #define TEA_BAND_SW 3
3377
3378 #define TEA_MONO 22:22
3379 #define TEA_ALLOW_STEREO 0
3380 #define TEA_FORCE_MONO 1
3381
3382 #define TEA_SEARCH_DIRECTION 23:23
3383 #define TEA_SEARCH_DOWN 0
3384 #define TEA_SEARCH_UP 1
3385
3386 #define TEA_STATUS 24:24
3387 #define TEA_STATUS_TUNED 0
3388 #define TEA_STATUS_SEARCHING 1
3389
3390 /* Low-level stuff */
3391 static int tea5757_read(struct bttv *btv)
3392 {
3393 unsigned long timeout;
3394 int value = 0;
3395 int i;
3396
3397 /* better safe than sorry */
3398 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
3399
3400 if (btv->mbox_ior) {
3401 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3402 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3403 udelay(5);
3404 }
3405
3406 if (bttv_gpio)
3407 bttv_gpio_tracking(btv,"tea5757 read");
3408
3409 bus_low(btv,btv->mbox_we);
3410 bus_low(btv,btv->mbox_clk);
3411
3412 udelay(10);
3413 timeout= jiffies + HZ;
3414
3415 // wait for DATA line to go low; error if it doesn't
3416 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
3417 schedule();
3418 if (bus_in(btv,btv->mbox_data)) {
3419 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
3420 return -1;
3421 }
3422
3423 dprintk("bttv%d: tea5757:",btv->c.nr);
3424 for(i = 0; i < 24; i++)
3425 {
3426 udelay(5);
3427 bus_high(btv,btv->mbox_clk);
3428 udelay(5);
3429 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
3430 bus_low(btv,btv->mbox_clk);
3431 value <<= 1;
3432 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
3433 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
3434 }
3435 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
3436 return value;
3437 }
3438
3439 static int tea5757_write(struct bttv *btv, int value)
3440 {
3441 int i;
3442 int reg = value;
3443
3444 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
3445
3446 if (btv->mbox_ior) {
3447 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3448 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3449 udelay(5);
3450 }
3451 if (bttv_gpio)
3452 bttv_gpio_tracking(btv,"tea5757 write");
3453
3454 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
3455 bus_low(btv,btv->mbox_clk);
3456 bus_high(btv,btv->mbox_we);
3457 for(i = 0; i < 25; i++)
3458 {
3459 if (reg & 0x1000000)
3460 bus_high(btv,btv->mbox_data);
3461 else
3462 bus_low(btv,btv->mbox_data);
3463 reg <<= 1;
3464 bus_high(btv,btv->mbox_clk);
3465 udelay(10);
3466 bus_low(btv,btv->mbox_clk);
3467 udelay(10);
3468 }
3469 bus_low(btv,btv->mbox_we); /* unmute !!! */
3470 return 0;
3471 }
3472
3473 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
3474 {
3475 dprintk("tea5757_set_freq %d\n",freq);
3476 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
3477 #if 0
3478 /* breaks Miro PCTV */
3479 value = tea5757_read(btv);
3480 dprintk("bttv%d: tea5757 readback=0x%x\n",btv->c.nr,value);
3481 #endif
3482 }
3483
3484
3485 /* ----------------------------------------------------------------------- */
3486 /* winview */
3487
3488 void winview_audio(struct bttv *btv, struct video_audio *v, int set)
3489 {
3490 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
3491 int bits_out, loops, vol, data;
3492
3493 if (!set) {
3494 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
3495 v->flags |= VIDEO_AUDIO_VOLUME;
3496 return;
3497 }
3498
3499 /* 32 levels logarithmic */
3500 vol = 32 - ((v->volume>>11));
3501 /* units */
3502 bits_out = (PT2254_DBS_IN_2>>(vol%5));
3503 /* tens */
3504 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
3505 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
3506 data = gpio_read();
3507 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
3508 WINVIEW_PT2254_STROBE);
3509 for (loops = 17; loops >= 0 ; loops--) {
3510 if (bits_out & (1<<loops))
3511 data |= WINVIEW_PT2254_DATA;
3512 else
3513 data &= ~WINVIEW_PT2254_DATA;
3514 gpio_write(data);
3515 udelay(5);
3516 data |= WINVIEW_PT2254_CLK;
3517 gpio_write(data);
3518 udelay(5);
3519 data &= ~WINVIEW_PT2254_CLK;
3520 gpio_write(data);
3521 }
3522 data |= WINVIEW_PT2254_STROBE;
3523 data &= ~WINVIEW_PT2254_DATA;
3524 gpio_write(data);
3525 udelay(10);
3526 data &= ~WINVIEW_PT2254_STROBE;
3527 gpio_write(data);
3528 }
3529
3530 /* ----------------------------------------------------------------------- */
3531 /* mono/stereo control for various cards (which don't use i2c chips but */
3532 /* connect something to the GPIO pins */
3533
3534 static void
3535 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
3536 {
3537 unsigned int con = 0;
3538
3539 if (set) {
3540 gpio_inout(0x300, 0x300);
3541 if (v->mode & VIDEO_SOUND_LANG1)
3542 con = 0x000;
3543 if (v->mode & VIDEO_SOUND_LANG2)
3544 con = 0x300;
3545 if (v->mode & VIDEO_SOUND_STEREO)
3546 con = 0x200;
3547 // if (v->mode & VIDEO_SOUND_MONO)
3548 // con = 0x100;
3549 gpio_bits(0x300, con);
3550 } else {
3551 v->mode = VIDEO_SOUND_STEREO |
3552 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3553 }
3554 }
3555
3556 static void
3557 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
3558 {
3559 unsigned int val, con;
3560
3561 #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
3562 if (btv->radio_user)
3563 return;
3564 #else
3565 if (btv->radio)
3566 return;
3567 #endif
3568
3569 val = gpio_read();
3570 if (set) {
3571 con = 0x000;
3572 if (v->mode & VIDEO_SOUND_LANG2) {
3573 if (v->mode & VIDEO_SOUND_LANG1) {
3574 /* LANG1 + LANG2 */
3575 con = 0x100;
3576 }
3577 else {
3578 /* LANG2 */
3579 con = 0x300;
3580 }
3581 }
3582 if (con != (val & 0x300)) {
3583 gpio_bits(0x300, con);
3584 if (bttv_gpio)
3585 bttv_gpio_tracking(btv,"gvbctv5pci");
3586 }
3587 } else {
3588 switch (val & 0x70) {
3589 case 0x10:
3590 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3591 break;
3592 case 0x30:
3593 v->mode = VIDEO_SOUND_LANG2;
3594 break;
3595 case 0x50:
3596 v->mode = VIDEO_SOUND_LANG1;
3597 break;
3598 case 0x60:
3599 v->mode = VIDEO_SOUND_STEREO;
3600 break;
3601 case 0x70:
3602 v->mode = VIDEO_SOUND_MONO;
3603 break;
3604 default:
3605 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3606 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3607 }
3608 }
3609 }
3610
3611 /*
3612 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
3613 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
3614 * 0xdde enables mono and 0xccd enables sap
3615 *
3616 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
3617 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
3618 * input/output sound connection, so both must be set for output mode.
3619 *
3620 * Looks like it's needed only for the "tvphone", the "tvphone 98"
3621 * handles this with a tda9840
3622 *
3623 */
3624 static void
3625 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
3626 {
3627 int val = 0;
3628
3629 if (set) {
3630 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3631 val = 0x02;
3632 if (v->mode & VIDEO_SOUND_STEREO)
3633 val = 0x01;
3634 if (val) {
3635 gpio_bits(0x03,val);
3636 if (bttv_gpio)
3637 bttv_gpio_tracking(btv,"avermedia");
3638 }
3639 } else {
3640 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3641 VIDEO_SOUND_LANG1;
3642 return;
3643 }
3644 }
3645
3646 static void
3647 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
3648 {
3649 int val = 0;
3650
3651 if (set) {
3652 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3653 val = 0x01;
3654 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
3655 val = 0x02;
3656 btaor(val, ~0x03, BT848_GPIO_DATA);
3657 if (bttv_gpio)
3658 bttv_gpio_tracking(btv,"avermedia");
3659 } else {
3660 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3661 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3662 return;
3663 }
3664 }
3665
3666 /* Lifetec 9415 handling */
3667 static void
3668 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
3669 {
3670 int val = 0;
3671
3672 if (gpio_read() & 0x4000) {
3673 v->mode = VIDEO_SOUND_MONO;
3674 return;
3675 }
3676
3677 if (set) {
3678 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
3679 val = 0x0080;
3680 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
3681 val = 0x0880;
3682 if ((v->mode & VIDEO_SOUND_LANG1) ||
3683 (v->mode & VIDEO_SOUND_MONO))
3684 val = 0;
3685 gpio_bits(0x0880, val);
3686 if (bttv_gpio)
3687 bttv_gpio_tracking(btv,"lt9415");
3688 } else {
3689 /* autodetect doesn't work with this card :-( */
3690 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3691 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3692 return;
3693 }
3694 }
3695
3696 // TDA9821 on TerraTV+ Bt848, Bt878
3697 static void
3698 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
3699 {
3700 unsigned int con = 0;
3701
3702 if (set) {
3703 gpio_inout(0x180000,0x180000);
3704 if (v->mode & VIDEO_SOUND_LANG2)
3705 con = 0x080000;
3706 if (v->mode & VIDEO_SOUND_STEREO)
3707 con = 0x180000;
3708 gpio_bits(0x180000, con);
3709 if (bttv_gpio)
3710 bttv_gpio_tracking(btv,"terratv");
3711 } else {
3712 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3713 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3714 }
3715 }
3716
3717 static void
3718 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
3719 {
3720 unsigned long val = 0;
3721
3722 if (set) {
3723 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
3724 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
3725 val = 0x420000;
3726 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
3727 val = 0x420000;
3728 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3729 val = 0x410000;
3730 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
3731 val = 0x020000;
3732 if (val) {
3733 gpio_bits(0x430000, val);
3734 if (bttv_gpio)
3735 bttv_gpio_tracking(btv,"winfast2000");
3736 }
3737 } else {
3738 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3739 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3740 }
3741 }
3742
3743 /*
3744 * Dariusz Kowalewski <darekk@automex.pl>
3745 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
3746 * revision 9B has on-board TDA9874A sound decoder).
3747 *
3748 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
3749 * will mute this cards.
3750 */
3751 static void
3752 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
3753 {
3754 unsigned int val = 0;
3755
3756 #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
3757 if (btv->radio_user)
3758 return;
3759 #else
3760 if (btv->radio)
3761 return;
3762 #endif
3763
3764 if (set) {
3765 if (v->mode & VIDEO_SOUND_MONO) {
3766 val = 0x01;
3767 }
3768 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
3769 || (v->mode & VIDEO_SOUND_STEREO)) {
3770 val = 0x02;
3771 }
3772 if (val) {
3773 gpio_bits(0x03,val);
3774 if (bttv_gpio)
3775 bttv_gpio_tracking(btv,"pvbt878p9b");
3776 }
3777 } else {
3778 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3779 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3780 }
3781 }
3782
3783 /*
3784 * Dariusz Kowalewski <darekk@automex.pl>
3785 * sound control for FlyVideo 2000S (with tda9874 decoder)
3786 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
3787 */
3788 static void
3789 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
3790 {
3791 unsigned int val = 0xffff;
3792
3793 #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
3794 if (btv->radio_user)
3795 return;
3796 #else
3797 if (btv->radio)
3798 return;
3799 #endif
3800 if (set) {
3801 if (v->mode & VIDEO_SOUND_MONO) {
3802 val = 0x0000;
3803 }
3804 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
3805 || (v->mode & VIDEO_SOUND_STEREO)) {
3806 val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
3807 }
3808 if (val != 0xffff) {
3809 gpio_bits(0x1800, val);
3810 if (bttv_gpio)
3811 bttv_gpio_tracking(btv,"fv2000s");
3812 }
3813 } else {
3814 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3815 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3816 }
3817 }
3818
3819 /*
3820 * sound control for Canopus WinDVR PCI
3821 * Masaki Suzuki <masaki@btree.org>
3822 */
3823 static void
3824 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
3825 {
3826 unsigned long val = 0;
3827
3828 if (set) {
3829 if (v->mode & VIDEO_SOUND_MONO)
3830 val = 0x040000;
3831 if (v->mode & VIDEO_SOUND_LANG1)
3832 val = 0;
3833 if (v->mode & VIDEO_SOUND_LANG2)
3834 val = 0x100000;
3835 if (v->mode & VIDEO_SOUND_STEREO)
3836 val = 0;
3837 if (val) {
3838 gpio_bits(0x140000, val);
3839 if (bttv_gpio)
3840 bttv_gpio_tracking(btv,"windvr");
3841 }
3842 } else {
3843 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3844 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3845 }
3846 }
3847
3848 /*
3849 * sound control for AD-TVK503
3850 * Hiroshi Takekawa <sian@big.or.jp>
3851 */
3852 static void
3853 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
3854 {
3855 unsigned int con = 0xffffff;
3856
3857 //btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
3858
3859 if (set) {
3860 //btor(***, BT848_GPIO_OUT_EN);
3861 if (v->mode & VIDEO_SOUND_LANG1)
3862 con = 0x00000000;
3863 if (v->mode & VIDEO_SOUND_LANG2)
3864 con = 0x00180000;
3865 if (v->mode & VIDEO_SOUND_STEREO)
3866 con = 0x00000000;
3867 if (v->mode & VIDEO_SOUND_MONO)
3868 con = 0x00060000;
3869 if (con != 0xffffff) {
3870 gpio_bits(0x1e0000,con);
3871 if (bttv_gpio)
3872 bttv_gpio_tracking(btv, "adtvk503");
3873 }
3874 } else {
3875 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3876 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3877 }
3878 }
3879
3880 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
3881 *
3882 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
3883 * switch instead (CD22M3494E). This IC can have multiple active connections
3884 * between Xn (input) and Yn (output) pins. We need to clear any existing
3885 * connection prior to establish a new one, pulsing the STROBE pin.
3886 *
3887 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
3888 * GPIO pins are wired as:
3889 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
3890 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
3891 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
3892 * GPIO[8] - - P3[5] (microcontroler)
3893 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
3894 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
3895 * GPINTR - - P3[4] (microcontroler)
3896 *
3897 * The microcontroler is a 80C32 like. It should be possible to change xpoint
3898 * configuration either directly (as we are doing) or using the microcontroler
3899 * which is also wired to I2C interface. I have no further info on the
3900 * microcontroler features, one would need to disassembly the firmware.
3901 * note: the vendor refused to give any information on this product, all
3902 * that stuff was found using a multimeter! :)
3903 */
3904 static void rv605_muxsel(struct bttv *btv, unsigned int input)
3905 {
3906 /* reset all conections */
3907 gpio_bits(0x200,0x200);
3908 mdelay(1);
3909 gpio_bits(0x200,0x000);
3910 mdelay(1);
3911
3912 /* create a new conection */
3913 gpio_bits(0x480,0x080);
3914 gpio_bits(0x480,0x480);
3915 mdelay(1);
3916 gpio_bits(0x480,0x080);
3917 mdelay(1);
3918 }
3919
3920 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
3921 *
3922 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
3923 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
3924 * chips, ten eight input analog multiplexors, a not chip and a few
3925 * other components.
3926 *
3927 * 16 inputs on a secondary bracket are provided and can be selected
3928 * from each of the four capture chips. Two of the eight input
3929 * multiplexors are used to select from any of the 16 input signals.
3930 *
3931 * Unsupported hardware capabilities:
3932 * . A video output monitor on the secondary bracket can be selected from
3933 * one of the 878A chips.
3934 * . Another passthrough but I haven't spent any time investigating it.
3935 * . Digital I/O (logic level connected to GPIO) is available from an
3936 * onboard header.
3937 *
3938 * The on chip input mux should always be set to 2.
3939 * GPIO[16:19] - Video input selection
3940 * GPIO[0:3] - Video output monitor select (only available from one 878A)
3941 * GPIO[?:?] - Digital I/O.
3942 *
3943 * There is an ATMEL microcontroller with an 8031 core on board. I have not
3944 * determined what function (if any) it provides. With the microcontroller
3945 * and sync seperator chips a guess is that it might have to do with video
3946 * switching and maybe some digital I/O.
3947 */
3948 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
3949 {
3950 /* video mux */
3951 gpio_bits(0x0f0000, input << 16);
3952 }
3953
3954 static void tibetCS16_init(struct bttv *btv)
3955 {
3956 /* enable gpio bits, mask obtained via btSpy */
3957 gpio_inout(0xffffff, 0x0f7fff);
3958 gpio_write(0x0f7fff);
3959 }
3960
3961 /*
3962 * The following routines for the Kodicom-4400r get a little mind-twisting.
3963 * There is a "master" controller and three "slave" controllers, together
3964 * an analog switch which connects any of 16 cameras to any of the BT87A's.
3965 * The analog switch is controlled by the "master", but the detection order
3966 * of the four BT878A chips is in an order which I just don't understand.
3967 * The "master" is actually the second controller to be detected. The
3968 * logic on the board uses logical numbers for the 4 controlers, but
3969 * those numbers are different from the detection sequence. When working
3970 * with the analog switch, we need to "map" from the detection sequence
3971 * over to the board's logical controller number. This mapping sequence
3972 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
3973 * unit 3, the second (which is the master) is logical unit 0, etc.
3974 * We need to maintain the status of the analog switch (which of the 16
3975 * cameras is connected to which of the 4 controllers). Rather than
3976 * add to the bttv structure for this, we use the data reserved for
3977 * the mbox (unused for this card type).
3978 */
3979
3980 /*
3981 * First a routine to set the analog switch, which controls which camera
3982 * is routed to which controller. The switch comprises an X-address
3983 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
3984 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
3985 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
3986 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
3987 * specified address. The idea is to set the address and data, then bring
3988 * STROBE high, and finally bring STROBE back to low.
3989 */
3990 static void kodicom4400r_write(struct bttv *btv,
3991 unsigned char xaddr,
3992 unsigned char yaddr,
3993 unsigned char data) {
3994 unsigned int udata;
3995
3996 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
3997 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
3998 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
3999 gpio_bits(0x1ff, udata); /* strobe low */
4000 }
4001
4002 /*
4003 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4004 * use this routine. The routine finds the "master" for the card, maps
4005 * the controller number from the detected position over to the logical
4006 * number, writes the appropriate data to the analog switch, and housekeeps
4007 * the local copy of the switch information. The parameter 'input' is the
4008 * requested camera number (0 - 15).
4009 */
4010 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4011 {
4012 char *sw_status;
4013 int xaddr, yaddr;
4014 struct bttv *mctlr;
4015 static unsigned char map[4] = {3, 0, 2, 1};
4016
4017 mctlr = master[btv->c.nr];
4018 if (mctlr == NULL) { /* ignore if master not yet detected */
4019 return;
4020 }
4021 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4022 yaddr = map[yaddr];
4023 sw_status = (char *)(&mctlr->mbox_we);
4024 xaddr = input & 0xf;
4025 /* Check if the controller/camera pair has changed, else ignore */
4026 if (sw_status[yaddr] != xaddr)
4027 {
4028 /* "open" the old switch, "close" the new one, save the new */
4029 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4030 sw_status[yaddr] = xaddr;
4031 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4032 }
4033 }
4034
4035 /*
4036 * During initialisation, we need to reset the analog switch. We
4037 * also preset the switch to map the 4 connectors on the card to the
4038 * *user's* (see above description of kodicom4400r_muxsel) channels
4039 * 0 through 3
4040 */
4041 static void kodicom4400r_init(struct bttv *btv)
4042 {
4043 char *sw_status = (char *)(&btv->mbox_we);
4044 int ix;
4045
4046 gpio_inout(0x0003ff, 0x0003ff);
4047 gpio_write(1 << 9); /* reset MUX */
4048 gpio_write(0);
4049 /* Preset camera 0 to the 4 controllers */
4050 for (ix=0; ix<4; ix++) {
4051 sw_status[ix] = ix;
4052 kodicom4400r_write(btv, ix, ix, 1);
4053 }
4054 /*
4055 * Since this is the "master", we need to set up the
4056 * other three controller chips' pointers to this structure
4057 * for later use in the muxsel routine.
4058 */
4059 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4060 return;
4061 master[btv->c.nr-1] = btv;
4062 master[btv->c.nr] = btv;
4063 master[btv->c.nr+1] = btv;
4064 master[btv->c.nr+2] = btv;
4065 }
4066
4067 // The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4068 // video multiplexers to provide up to 16 video inputs. These
4069 // multiplexers are controlled by the lower 8 GPIO pins of the
4070 // bt878. The multiplexers probably Pericom PI5V331Q or similar.
4071
4072 // xxx0 is pin xxx of multiplexer U5,
4073 // yyy1 is pin yyy of multiplexer U2
4074
4075 #define ENA0 0x01
4076 #define ENB0 0x02
4077 #define ENA1 0x04
4078 #define ENB1 0x08
4079
4080 #define IN10 0x10
4081 #define IN00 0x20
4082 #define IN11 0x40
4083 #define IN01 0x80
4084
4085 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4086 {
4087 static const int masks[] = {
4088 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4089 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4090 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4091 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4092 };
4093 gpio_write(masks[input%16]);
4094 }
4095 static void picolo_tetra_init(struct bttv *btv)
4096 {
4097 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4098 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4099 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4100 }
4101 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4102 {
4103
4104 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4105 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4106 /*GPIO[20]&GPIO[21] used to choose the right input*/
4107 btwrite (input<<20,BT848_GPIO_DATA);
4108
4109 }
4110
4111 /*
4112 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4113 *
4114 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4115 * swichers to provide 16 channels to MUX0. The TDA8540's have
4116 * 4 indepedant outputs and as such the IVC120G also has the
4117 * optional "Monitor Out" bus. This allows the card to be looking
4118 * at one input while the monitor is looking at another.
4119 *
4120 * Since I've couldn't be bothered figuring out how to add an
4121 * independant muxsel for the monitor bus, I've just set it to
4122 * whatever the card is looking at.
4123 *
4124 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4125 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4126 *
4127 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4128 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4129 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4130 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4131 *
4132 */
4133
4134 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4135 #define I2C_TDA8540 0x90
4136 #define I2C_TDA8540_ALT1 0x92
4137 #define I2C_TDA8540_ALT2 0x94
4138 #define I2C_TDA8540_ALT3 0x96
4139 #define I2C_TDA8540_ALT4 0x98
4140 #define I2C_TDA8540_ALT5 0x9a
4141 #define I2C_TDA8540_ALT6 0x9c
4142
4143 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4144 {
4145 // Simple maths
4146 int key = input % 4;
4147 int matrix = input / 4;
4148
4149 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4150 btv->c.nr, input, matrix, key);
4151
4152 // Handles the input selection on the TDA8540's
4153 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4154 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4155 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4156 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4157 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4158 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4159 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4160 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4161
4162 // Handles the output enables on the TDA8540's
4163 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4164 ((matrix == 3) ? 0x03 : 0x00), 1); // 13 - 16
4165 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4166 ((matrix == 0) ? 0x03 : 0x00), 1); // 1-4
4167 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4168 ((matrix == 1) ? 0x03 : 0x00), 1); // 5-8
4169 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4170 ((matrix == 2) ? 0x03 : 0x00), 1); // 9-12
4171
4172 // Selects MUX0 for input on the 878
4173 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4174 }
4175
4176
4177 /* PXC200 muxsel helper
4178 * luke@syseng.anu.edu.au
4179 * another transplant
4180 * from Alessandro Rubini (rubini@linux.it)
4181 *
4182 * There are 4 kinds of cards:
4183 * PXC200L which is bt848
4184 * PXC200F which is bt848 with PIC controlling mux
4185 * PXC200AL which is bt878
4186 * PXC200AF which is bt878 with PIC controlling mux
4187 */
4188 #define PX_CFG_PXC200F 0x01
4189 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4190 #define PX_I2C_PIC 0x0f
4191 #define PX_PXC200A_CARDID 0x200a1295
4192 #define PX_I2C_CMD_CFG 0x00
4193
4194 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4195 {
4196 int rc;
4197 long mux;
4198 int bitmask;
4199 unsigned char buf[2];
4200
4201 /* Read PIC config to determine if this is a PXC200F */
4202 /* PX_I2C_CMD_CFG*/
4203 buf[0]=0;
4204 buf[1]=0;
4205 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4206 if (rc) {
4207 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4208 /* not PXC ? do nothing */
4209 return;
4210 }
4211
4212 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4213 if (!(rc & PX_CFG_PXC200F)) {
4214 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4215 return;
4216 }
4217
4218
4219 /* The multiplexer in the 200F is handled by the GPIO port */
4220 /* get correct mapping between inputs */
4221 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4222 /* ** not needed!? */
4223 mux = input;
4224
4225 /* make sure output pins are enabled */
4226 /* bitmask=0x30f; */
4227 bitmask=0x302;
4228 /* check whether we have a PXC200A */
4229 if (btv->cardid == PX_PXC200A_CARDID) {
4230 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4231 bitmask |= 7<<4; /* the DAC */
4232 }
4233 btwrite(bitmask, BT848_GPIO_OUT_EN);
4234
4235 bitmask = btread(BT848_GPIO_DATA);
4236 if (btv->cardid == PX_PXC200A_CARDID)
4237 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4238 else /* older device */
4239 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4240 btwrite(bitmask,BT848_GPIO_DATA);
4241
4242 /*
4243 * Was "to be safe, set the bt848 to input 0"
4244 * Actually, since it's ok at load time, better not messing
4245 * with these bits (on PXC200AF you need to set mux 2 here)
4246 *
4247 * needed because bttv-driver sets mux before calling this function
4248 */
4249 if (btv->cardid == PX_PXC200A_CARDID)
4250 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4251 else /* older device */
4252 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4253
4254 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4255 }
4256
4257 /* ----------------------------------------------------------------------- */
4258 /* motherboard chipset specific stuff */
4259
4260 void __devinit bttv_check_chipset(void)
4261 {
4262 int pcipci_fail = 0;
4263 struct pci_dev *dev = NULL;
4264
4265 if (pci_pci_problems & PCIPCI_FAIL)
4266 pcipci_fail = 1;
4267 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4268 triton1 = 1;
4269 if (pci_pci_problems & PCIPCI_VSFX)
4270 vsfx = 1;
4271 #ifdef PCIPCI_ALIMAGIK
4272 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4273 latency = 0x0A;
4274 #endif
4275
4276 #if 0
4277 /* print which chipset we have */
4278 while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
4279 printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
4280 #endif
4281
4282 /* print warnings about any quirks found */
4283 if (triton1)
4284 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4285 if (vsfx)
4286 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4287 if (pcipci_fail) {
4288 printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
4289 if (UNSET == no_overlay) {
4290 printk(KERN_WARNING "bttv: going to disable overlay.\n");
4291 no_overlay = 1;
4292 }
4293 }
4294 if (UNSET != latency)
4295 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4296
4297 while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
4298 PCI_DEVICE_ID_INTEL_82441, dev))) {
4299 unsigned char b;
4300 pci_read_config_byte(dev, 0x53, &b);
4301 if (bttv_debug)
4302 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4303 "bufcon=0x%02x\n",b);
4304 }
4305 }
4306
4307 int __devinit bttv_handle_chipset(struct bttv *btv)
4308 {
4309 unsigned char command;
4310
4311 if (!triton1 && !vsfx && UNSET == latency)
4312 return 0;
4313
4314 if (bttv_verbose) {
4315 if (triton1)
4316 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4317 if (vsfx && btv->id >= 878)
4318 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4319 if (UNSET != latency)
4320 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4321 btv->c.nr,latency);
4322 }
4323
4324 if (btv->id < 878) {
4325 /* bt848 (mis)uses a bit in the irq mask for etbf */
4326 if (triton1)
4327 btv->triton1 = BT848_INT_ETBF;
4328 } else {
4329 /* bt878 has a bit in the pci config space for it */
4330 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4331 if (triton1)
4332 command |= BT878_EN_TBFX;
4333 if (vsfx)
4334 command |= BT878_EN_VSFX;
4335 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4336 }
4337 if (UNSET != latency)
4338 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4339 return 0;
4340 }
4341
4342
4343 /*
4344 * Local variables:
4345 * c-basic-offset: 8
4346 * End:
4347 */
Verdex Pro support