[XFRM]: skb_cow_data() does not set proper owner for new skbs.
[linux-2.6/verdex.git] / drivers / media / video / tda9887.c
blobdebef1910c3741077b1b3e049f8163c866c92fdd
1 #include <linux/module.h>
2 #include <linux/moduleparam.h>
3 #include <linux/kernel.h>
4 #include <linux/i2c.h>
5 #include <linux/types.h>
6 #include <linux/videodev.h>
7 #include <linux/init.h>
8 #include <linux/errno.h>
9 #include <linux/slab.h>
10 #include <linux/delay.h>
12 #include <media/audiochip.h>
13 #include <media/tuner.h>
14 #include <media/id.h>
16 /* Chips:
17 TDA9885 (PAL, NTSC)
18 TDA9886 (PAL, SECAM, NTSC)
19 TDA9887 (PAL, SECAM, NTSC, FM Radio)
21 found on:
22 - Pinnacle PCTV (Jul.2002 Version with MT2032, bttv)
23 TDA9887 (world), TDA9885 (USA)
24 Note: OP2 of tda988x must be set to 1, else MT2032 is disabled!
25 - KNC One TV-Station RDS (saa7134)
29 /* Addresses to scan */
30 static unsigned short normal_i2c[] = {
31 0x84 >>1,
32 0x86 >>1,
33 0x96 >>1,
34 I2C_CLIENT_END,
36 static unsigned short normal_i2c_range[] = {I2C_CLIENT_END,I2C_CLIENT_END};
37 I2C_CLIENT_INSMOD;
39 /* insmod options */
40 static unsigned int debug = 0;
41 module_param(debug, int, 0644);
42 MODULE_LICENSE("GPL");
44 /* ---------------------------------------------------------------------- */
46 #define UNSET (-1U)
47 #define PREFIX "tda9885/6/7: "
48 #define dprintk if (debug) printk
50 struct tda9887 {
51 struct i2c_client client;
52 v4l2_std_id std;
53 unsigned int radio;
54 unsigned int config;
55 unsigned int pinnacle_id;
56 unsigned int using_v4l2;
59 struct tvnorm {
60 v4l2_std_id std;
61 char *name;
62 unsigned char b;
63 unsigned char c;
64 unsigned char e;
67 static struct i2c_driver driver;
68 static struct i2c_client client_template;
70 /* ---------------------------------------------------------------------- */
73 // TDA defines
76 //// first reg (b)
77 #define cVideoTrapBypassOFF 0x00 // bit b0
78 #define cVideoTrapBypassON 0x01 // bit b0
80 #define cAutoMuteFmInactive 0x00 // bit b1
81 #define cAutoMuteFmActive 0x02 // bit b1
83 #define cIntercarrier 0x00 // bit b2
84 #define cQSS 0x04 // bit b2
86 #define cPositiveAmTV 0x00 // bit b3:4
87 #define cFmRadio 0x08 // bit b3:4
88 #define cNegativeFmTV 0x10 // bit b3:4
91 #define cForcedMuteAudioON 0x20 // bit b5
92 #define cForcedMuteAudioOFF 0x00 // bit b5
94 #define cOutputPort1Active 0x00 // bit b6
95 #define cOutputPort1Inactive 0x40 // bit b6
97 #define cOutputPort2Active 0x00 // bit b7
98 #define cOutputPort2Inactive 0x80 // bit b7
101 //// second reg (c)
102 #define cDeemphasisOFF 0x00 // bit c5
103 #define cDeemphasisON 0x20 // bit c5
105 #define cDeemphasis75 0x00 // bit c6
106 #define cDeemphasis50 0x40 // bit c6
108 #define cAudioGain0 0x00 // bit c7
109 #define cAudioGain6 0x80 // bit c7
112 //// third reg (e)
113 #define cAudioIF_4_5 0x00 // bit e0:1
114 #define cAudioIF_5_5 0x01 // bit e0:1
115 #define cAudioIF_6_0 0x02 // bit e0:1
116 #define cAudioIF_6_5 0x03 // bit e0:1
119 #define cVideoIF_58_75 0x00 // bit e2:4
120 #define cVideoIF_45_75 0x04 // bit e2:4
121 #define cVideoIF_38_90 0x08 // bit e2:4
122 #define cVideoIF_38_00 0x0C // bit e2:4
123 #define cVideoIF_33_90 0x10 // bit e2:4
124 #define cVideoIF_33_40 0x14 // bit e2:4
125 #define cRadioIF_45_75 0x18 // bit e2:4
126 #define cRadioIF_38_90 0x1C // bit e2:4
129 #define cTunerGainNormal 0x00 // bit e5
130 #define cTunerGainLow 0x20 // bit e5
132 #define cGating_18 0x00 // bit e6
133 #define cGating_36 0x40 // bit e6
135 #define cAgcOutON 0x80 // bit e7
136 #define cAgcOutOFF 0x00 // bit e7
138 /* ---------------------------------------------------------------------- */
140 static struct tvnorm tvnorms[] = {
142 .std = V4L2_STD_PAL_BG,
143 .name = "PAL-BG",
144 .b = ( cNegativeFmTV |
145 cQSS ),
146 .c = ( cDeemphasisON |
147 cDeemphasis50 ),
148 .e = ( cAudioIF_5_5 |
149 cVideoIF_38_90 ),
151 .std = V4L2_STD_PAL_I,
152 .name = "PAL-I",
153 .b = ( cNegativeFmTV |
154 cQSS ),
155 .c = ( cDeemphasisON |
156 cDeemphasis50 ),
157 .e = ( cAudioIF_6_0 |
158 cVideoIF_38_90 ),
160 .std = V4L2_STD_PAL_DK,
161 .name = "PAL-DK",
162 .b = ( cNegativeFmTV |
163 cQSS ),
164 .c = ( cDeemphasisON |
165 cDeemphasis50 ),
166 .e = ( cAudioIF_6_5 |
167 cVideoIF_38_00 ),
169 .std = V4L2_STD_PAL_M | V4L2_STD_PAL_N,
170 .name = "PAL-M/N",
171 .b = ( cNegativeFmTV |
172 cQSS ),
173 .c = ( cDeemphasisON |
174 cDeemphasis75 ),
175 .e = ( cAudioIF_4_5 |
176 cVideoIF_45_75 ),
178 .std = V4L2_STD_SECAM_L,
179 .name = "SECAM-L",
180 .b = ( cPositiveAmTV |
181 cQSS ),
182 .e = ( cAudioIF_6_5 |
183 cVideoIF_38_90 ),
185 .std = V4L2_STD_SECAM_DK,
186 .name = "SECAM-DK",
187 .b = ( cNegativeFmTV |
188 cQSS ),
189 .c = ( cDeemphasisON |
190 cDeemphasis50 ),
191 .e = ( cAudioIF_6_5 |
192 cVideoIF_38_00 ),
194 .std = V4L2_STD_NTSC_M,
195 .name = "NTSC-M",
196 .b = ( cNegativeFmTV |
197 cQSS ),
198 .c = ( cDeemphasisON |
199 cDeemphasis50 ),
200 .e = ( cGating_36 |
201 cAudioIF_4_5 |
202 cVideoIF_45_75 ),
204 .std = V4L2_STD_NTSC_M_JP,
205 .name = "NTSC-JP",
206 .b = ( cNegativeFmTV |
207 cQSS ),
208 .c = ( cDeemphasisON |
209 cDeemphasis50 ),
210 .e = ( cGating_36 |
211 cAudioIF_4_5 |
212 cVideoIF_58_75 ),
216 static struct tvnorm radio = {
217 .name = "radio",
218 .b = ( cFmRadio |
219 cQSS ),
220 .c = ( cDeemphasisON |
221 cDeemphasis50 ),
222 .e = ( cAudioIF_5_5 |
223 cRadioIF_38_90 ),
226 /* ---------------------------------------------------------------------- */
228 static void dump_read_message(unsigned char *buf)
230 static char *afc[16] = {
231 "- 12.5 kHz",
232 "- 37.5 kHz",
233 "- 62.5 kHz",
234 "- 87.5 kHz",
235 "-112.5 kHz",
236 "-137.5 kHz",
237 "-162.5 kHz",
238 "-187.5 kHz [min]",
239 "+187.5 kHz [max]",
240 "+162.5 kHz",
241 "+137.5 kHz",
242 "+112.5 kHz",
243 "+ 87.5 kHz",
244 "+ 62.5 kHz",
245 "+ 37.5 kHz",
246 "+ 12.5 kHz",
248 printk(PREFIX "read: 0x%2x\n", buf[0]);
249 printk(" after power on : %s\n", (buf[0] & 0x01) ? "yes" : "no");
250 printk(" afc : %s\n", afc[(buf[0] >> 1) & 0x0f]);
251 printk(" fmif level : %s\n", (buf[0] & 0x20) ? "high" : "low");
252 printk(" afc window : %s\n", (buf[0] & 0x40) ? "in" : "out");
253 printk(" vfi level : %s\n", (buf[0] & 0x80) ? "high" : "low");
256 static void dump_write_message(unsigned char *buf)
258 static char *sound[4] = {
259 "AM/TV",
260 "FM/radio",
261 "FM/TV",
262 "FM/radio"
264 static char *adjust[32] = {
265 "-16", "-15", "-14", "-13", "-12", "-11", "-10", "-9",
266 "-8", "-7", "-6", "-5", "-4", "-3", "-2", "-1",
267 "0", "+1", "+2", "+3", "+4", "+5", "+6", "+7",
268 "+8", "+9", "+10", "+11", "+12", "+13", "+14", "+15"
270 static char *deemph[4] = {
271 "no", "no", "75", "50"
273 static char *carrier[4] = {
274 "4.5 MHz",
275 "5.5 MHz",
276 "6.0 MHz",
277 "6.5 MHz / AM"
279 static char *vif[8] = {
280 "58.75 MHz",
281 "45.75 MHz",
282 "38.9 MHz",
283 "38.0 MHz",
284 "33.9 MHz",
285 "33.4 MHz",
286 "45.75 MHz + pin13",
287 "38.9 MHz + pin13",
289 static char *rif[4] = {
290 "44 MHz",
291 "52 MHz",
292 "52 MHz",
293 "44 MHz",
296 printk(PREFIX "write: byte B 0x%02x\n",buf[1]);
297 printk(" B0 video mode : %s\n",
298 (buf[1] & 0x01) ? "video trap" : "sound trap");
299 printk(" B1 auto mute fm : %s\n",
300 (buf[1] & 0x02) ? "yes" : "no");
301 printk(" B2 carrier mode : %s\n",
302 (buf[1] & 0x04) ? "QSS" : "Intercarrier");
303 printk(" B3-4 tv sound/radio : %s\n",
304 sound[(buf[1] & 0x18) >> 3]);
305 printk(" B5 force mute audio: %s\n",
306 (buf[1] & 0x20) ? "yes" : "no");
307 printk(" B6 output port 1 : %s\n",
308 (buf[1] & 0x40) ? "high (inactive)" : "low (active)");
309 printk(" B7 output port 2 : %s\n",
310 (buf[1] & 0x80) ? "high (inactive)" : "low (active)");
312 printk(PREFIX "write: byte C 0x%02x\n",buf[2]);
313 printk(" C0-4 top adjustment : %s dB\n", adjust[buf[2] & 0x1f]);
314 printk(" C5-6 de-emphasis : %s\n", deemph[(buf[2] & 0x60) >> 5]);
315 printk(" C7 audio gain : %s\n",
316 (buf[2] & 0x80) ? "-6" : "0");
318 printk(PREFIX "write: byte E 0x%02x\n",buf[3]);
319 printk(" E0-1 sound carrier : %s\n",
320 carrier[(buf[3] & 0x03)]);
321 printk(" E6 l pll ganting : %s\n",
322 (buf[3] & 0x40) ? "36" : "13");
324 if (buf[1] & 0x08) {
325 /* radio */
326 printk(" E2-4 video if : %s\n",
327 rif[(buf[3] & 0x0c) >> 2]);
328 printk(" E7 vif agc output : %s\n",
329 (buf[3] & 0x80)
330 ? ((buf[3] & 0x10) ? "fm-agc radio" : "sif-agc radio")
331 : "fm radio carrier afc");
332 } else {
333 /* video */
334 printk(" E2-4 video if : %s\n",
335 vif[(buf[3] & 0x1c) >> 2]);
336 printk(" E5 tuner gain : %s\n",
337 (buf[3] & 0x80)
338 ? ((buf[3] & 0x20) ? "external" : "normal")
339 : ((buf[3] & 0x20) ? "minimum" : "normal"));
340 printk(" E7 vif agc output : %s\n",
341 (buf[3] & 0x80)
342 ? ((buf[3] & 0x20)
343 ? "pin3 port, pin22 vif agc out"
344 : "pin22 port, pin3 vif acg ext in")
345 : "pin3+pin22 port");
347 printk("--\n");
350 /* ---------------------------------------------------------------------- */
352 static int tda9887_set_tvnorm(struct tda9887 *t, char *buf)
354 struct tvnorm *norm = NULL;
355 int i;
357 if (t->radio) {
358 norm = &radio;
359 } else {
360 for (i = 0; i < ARRAY_SIZE(tvnorms); i++) {
361 if (tvnorms[i].std & t->std) {
362 norm = tvnorms+i;
363 break;
367 if (NULL == norm) {
368 dprintk(PREFIX "Oops: no tvnorm entry found\n");
369 return -1;
372 dprintk(PREFIX "configure for: %s\n",norm->name);
373 buf[1] = norm->b;
374 buf[2] = norm->c;
375 buf[3] = norm->e;
376 return 0;
379 static unsigned int port1 = UNSET;
380 static unsigned int port2 = UNSET;
381 static unsigned int qss = UNSET;
382 static unsigned int adjust = 0x10;
383 module_param(port1, int, 0644);
384 module_param(port2, int, 0644);
385 module_param(qss, int, 0644);
386 module_param(adjust, int, 0644);
388 static int tda9887_set_insmod(struct tda9887 *t, char *buf)
390 if (UNSET != port1) {
391 if (port1)
392 buf[1] |= cOutputPort1Inactive;
393 else
394 buf[1] &= ~cOutputPort1Inactive;
396 if (UNSET != port2) {
397 if (port2)
398 buf[1] |= cOutputPort2Inactive;
399 else
400 buf[1] &= ~cOutputPort2Inactive;
403 if (UNSET != qss) {
404 if (qss)
405 buf[1] |= cQSS;
406 else
407 buf[1] &= ~cQSS;
410 if (adjust >= 0x00 && adjust < 0x20)
411 buf[2] |= adjust;
412 return 0;
415 static int tda9887_set_config(struct tda9887 *t, char *buf)
417 if (t->config & TDA9887_PORT1_ACTIVE)
418 buf[1] &= ~cOutputPort1Inactive;
419 if (t->config & TDA9887_PORT1_INACTIVE)
420 buf[1] |= cOutputPort1Inactive;
421 if (t->config & TDA9887_PORT2_ACTIVE)
422 buf[1] &= ~cOutputPort2Inactive;
423 if (t->config & TDA9887_PORT2_INACTIVE)
424 buf[1] |= cOutputPort2Inactive;
426 if (t->config & TDA9887_QSS)
427 buf[1] |= cQSS;
428 if (t->config & TDA9887_INTERCARRIER)
429 buf[1] &= ~cQSS;
431 if (t->config & TDA9887_AUTOMUTE)
432 buf[1] |= cAutoMuteFmActive;
433 if (t->config & TDA9887_DEEMPHASIS_MASK) {
434 buf[2] &= ~0x60;
435 switch (t->config & TDA9887_DEEMPHASIS_MASK) {
436 case TDA9887_DEEMPHASIS_NONE:
437 buf[2] |= cDeemphasisOFF;
438 break;
439 case TDA9887_DEEMPHASIS_50:
440 buf[2] |= cDeemphasisON | cDeemphasis50;
441 break;
442 case TDA9887_DEEMPHASIS_75:
443 buf[2] |= cDeemphasisON | cDeemphasis75;
444 break;
447 return 0;
450 /* ---------------------------------------------------------------------- */
452 static int tda9887_set_pinnacle(struct tda9887 *t, char *buf)
454 unsigned int bCarrierMode = UNSET;
456 if (t->std & V4L2_STD_625_50) {
457 if ((1 == t->pinnacle_id) || (7 == t->pinnacle_id)) {
458 bCarrierMode = cIntercarrier;
459 } else {
460 bCarrierMode = cQSS;
463 if (t->std & V4L2_STD_525_60) {
464 if ((5 == t->pinnacle_id) || (6 == t->pinnacle_id)) {
465 bCarrierMode = cIntercarrier;
466 } else {
467 bCarrierMode = cQSS;
471 if (bCarrierMode != UNSET) {
472 buf[1] &= ~0x04;
473 buf[1] |= bCarrierMode;
475 return 0;
478 /* ---------------------------------------------------------------------- */
480 static char pal[] = "-";
481 module_param_string(pal, pal, sizeof(pal), 0644);
482 static char secam[] = "-";
483 module_param_string(secam, secam, sizeof(secam), 0644);
485 static int tda9887_fixup_std(struct tda9887 *t)
487 /* get more precise norm info from insmod option */
488 if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) {
489 switch (pal[0]) {
490 case 'b':
491 case 'B':
492 case 'g':
493 case 'G':
494 dprintk(PREFIX "insmod fixup: PAL => PAL-BG\n");
495 t->std = V4L2_STD_PAL_BG;
496 break;
497 case 'i':
498 case 'I':
499 dprintk(PREFIX "insmod fixup: PAL => PAL-I\n");
500 t->std = V4L2_STD_PAL_I;
501 break;
502 case 'd':
503 case 'D':
504 case 'k':
505 case 'K':
506 dprintk(PREFIX "insmod fixup: PAL => PAL-DK\n");
507 t->std = V4L2_STD_PAL_DK;
508 break;
511 if ((t->std & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
512 switch (secam[0]) {
513 case 'd':
514 case 'D':
515 case 'k':
516 case 'K':
517 dprintk(PREFIX "insmod fixup: SECAM => SECAM-DK\n");
518 t->std = V4L2_STD_SECAM_DK;
519 break;
520 case 'l':
521 case 'L':
522 dprintk(PREFIX "insmod fixup: SECAM => SECAM-L\n");
523 t->std = V4L2_STD_SECAM_L;
524 break;
527 return 0;
530 static int tda9887_status(struct tda9887 *t)
532 unsigned char buf[1];
533 int rc;
535 memset(buf,0,sizeof(buf));
536 if (1 != (rc = i2c_master_recv(&t->client,buf,1)))
537 printk(PREFIX "i2c i/o error: rc == %d (should be 1)\n",rc);
538 dump_read_message(buf);
539 return 0;
542 static int tda9887_configure(struct tda9887 *t)
544 unsigned char buf[4];
545 int rc;
547 memset(buf,0,sizeof(buf));
548 tda9887_set_tvnorm(t,buf);
549 buf[1] |= cOutputPort1Inactive;
550 buf[1] |= cOutputPort2Inactive;
551 if (UNSET != t->pinnacle_id) {
552 tda9887_set_pinnacle(t,buf);
554 tda9887_set_config(t,buf);
555 tda9887_set_insmod(t,buf);
557 #if 0
558 /* This as-is breaks some cards, must be fixed in a
559 * card-specific way, probably using TDA9887_SET_CONFIG to
560 * turn on/off port2 */
561 if (t->std & V4L2_STD_SECAM_L) {
562 /* secam fixup (FIXME: move this to tvnorms array?) */
563 buf[1] &= ~cOutputPort2Inactive;
565 #endif
567 dprintk(PREFIX "writing: b=0x%02x c=0x%02x e=0x%02x\n",
568 buf[1],buf[2],buf[3]);
569 if (debug > 1)
570 dump_write_message(buf);
572 if (4 != (rc = i2c_master_send(&t->client,buf,4)))
573 printk(PREFIX "i2c i/o error: rc == %d (should be 4)\n",rc);
575 if (debug > 2) {
576 msleep_interruptible(1000);
577 tda9887_status(t);
579 return 0;
582 /* ---------------------------------------------------------------------- */
584 static int tda9887_attach(struct i2c_adapter *adap, int addr, int kind)
586 struct tda9887 *t;
588 client_template.adapter = adap;
589 client_template.addr = addr;
591 printk(PREFIX "chip found @ 0x%x\n", addr<<1);
593 if (NULL == (t = kmalloc(sizeof(*t), GFP_KERNEL)))
594 return -ENOMEM;
595 memset(t,0,sizeof(*t));
596 t->client = client_template;
597 t->std = 0;
598 t->pinnacle_id = UNSET;
599 i2c_set_clientdata(&t->client, t);
600 i2c_attach_client(&t->client);
602 return 0;
605 static int tda9887_probe(struct i2c_adapter *adap)
607 #ifdef I2C_CLASS_TV_ANALOG
608 if (adap->class & I2C_CLASS_TV_ANALOG)
609 return i2c_probe(adap, &addr_data, tda9887_attach);
610 #else
611 switch (adap->id) {
612 case I2C_ALGO_BIT | I2C_HW_B_BT848:
613 case I2C_ALGO_BIT | I2C_HW_B_RIVA:
614 case I2C_ALGO_SAA7134:
615 return i2c_probe(adap, &addr_data, tda9887_attach);
616 break;
618 #endif
619 return 0;
622 static int tda9887_detach(struct i2c_client *client)
624 struct tda9887 *t = i2c_get_clientdata(client);
626 i2c_detach_client(client);
627 kfree(t);
628 return 0;
631 #define SWITCH_V4L2 if (!t->using_v4l2 && debug) \
632 printk(PREFIX "switching to v4l2\n"); \
633 t->using_v4l2 = 1;
634 #define CHECK_V4L2 if (t->using_v4l2) { if (debug) \
635 printk(PREFIX "ignore v4l1 call\n"); \
636 return 0; }
638 static int
639 tda9887_command(struct i2c_client *client, unsigned int cmd, void *arg)
641 struct tda9887 *t = i2c_get_clientdata(client);
643 switch (cmd) {
645 /* --- configuration --- */
646 case AUDC_SET_RADIO:
647 t->radio = 1;
648 tda9887_configure(t);
649 break;
651 case AUDC_CONFIG_PINNACLE:
653 int *i = arg;
655 t->pinnacle_id = *i;
656 tda9887_configure(t);
657 break;
659 case TDA9887_SET_CONFIG:
661 int *i = arg;
663 t->config = *i;
664 tda9887_configure(t);
665 break;
667 /* --- v4l ioctls --- */
668 /* take care: bttv does userspace copying, we'll get a
669 kernel pointer here... */
670 case VIDIOCSCHAN:
672 static const v4l2_std_id map[] = {
673 [ VIDEO_MODE_PAL ] = V4L2_STD_PAL,
674 [ VIDEO_MODE_NTSC ] = V4L2_STD_NTSC_M,
675 [ VIDEO_MODE_SECAM ] = V4L2_STD_SECAM,
676 [ 4 /* bttv */ ] = V4L2_STD_PAL_M,
677 [ 5 /* bttv */ ] = V4L2_STD_PAL_N,
678 [ 6 /* bttv */ ] = V4L2_STD_NTSC_M_JP,
680 struct video_channel *vc = arg;
682 CHECK_V4L2;
683 t->radio = 0;
684 if (vc->norm < ARRAY_SIZE(map))
685 t->std = map[vc->norm];
686 tda9887_fixup_std(t);
687 tda9887_configure(t);
688 break;
690 case VIDIOC_S_STD:
692 v4l2_std_id *id = arg;
694 SWITCH_V4L2;
695 t->radio = 0;
696 t->std = *id;
697 tda9887_fixup_std(t);
698 tda9887_configure(t);
699 break;
701 case VIDIOC_S_FREQUENCY:
703 struct v4l2_frequency *f = arg;
705 SWITCH_V4L2;
706 if (V4L2_TUNER_ANALOG_TV == f->type) {
707 if (t->radio == 0)
708 return 0;
709 t->radio = 0;
711 if (V4L2_TUNER_RADIO == f->type) {
712 if (t->radio == 1)
713 return 0;
714 t->radio = 1;
716 tda9887_configure(t);
717 break;
719 case VIDIOC_G_TUNER:
721 static int AFC_BITS_2_kHz[] = {
722 -12500, -37500, -62500, -97500,
723 -112500, -137500, -162500, -187500,
724 187500, 162500, 137500, 112500,
725 97500 , 62500, 37500 , 12500
727 struct v4l2_tuner* tuner = arg;
729 if (t->radio) {
730 __u8 reg = 0;
731 tuner->afc=0;
732 if (1 == i2c_master_recv(&t->client,&reg,1))
733 tuner->afc = AFC_BITS_2_kHz[(reg>>1)&0x0f];
735 break;
737 default:
738 /* nothing */
739 break;
741 return 0;
744 static int tda9887_suspend(struct device * dev, pm_message_t state, u32 level)
746 dprintk("tda9887: suspend\n");
747 return 0;
750 static int tda9887_resume(struct device * dev, u32 level)
752 struct i2c_client *c = container_of(dev, struct i2c_client, dev);
753 struct tda9887 *t = i2c_get_clientdata(c);
755 dprintk("tda9887: resume\n");
756 tda9887_configure(t);
757 return 0;
760 /* ----------------------------------------------------------------------- */
762 static struct i2c_driver driver = {
763 .owner = THIS_MODULE,
764 .name = "i2c tda9887 driver",
765 .id = -1, /* FIXME */
766 .flags = I2C_DF_NOTIFY,
767 .attach_adapter = tda9887_probe,
768 .detach_client = tda9887_detach,
769 .command = tda9887_command,
770 .driver = {
771 .suspend = tda9887_suspend,
772 .resume = tda9887_resume,
775 static struct i2c_client client_template =
777 I2C_DEVNAME("tda9887"),
778 .flags = I2C_CLIENT_ALLOW_USE,
779 .driver = &driver,
782 static int __init tda9887_init_module(void)
784 return i2c_add_driver(&driver);
787 static void __exit tda9887_cleanup_module(void)
789 i2c_del_driver(&driver);
792 module_init(tda9887_init_module);
793 module_exit(tda9887_cleanup_module);
796 * Overrides for Emacs so that we follow Linus's tabbing style.
797 * ---------------------------------------------------------------------------
798 * Local variables:
799 * c-basic-offset: 8
800 * End: