drivers/message/fusion/mptbase.h

   1 /*
   2  *  linux/drivers/message/fusion/mptbase.h
   3  *      High performance SCSI + LAN / Fibre Channel device drivers.
   4  *      For use with PCI chip/adapter(s):
   5  *          LSIFC9xx/LSI409xx Fibre Channel
   6  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
   7  *
   8  *  Credits:
   9  *     (see mptbase.c)
  10  *
  11  *  Copyright (c) 1999-2004 LSI Logic Corporation
  12  *  Originally By: Steven J. Ralston
  13  *  (mailto:sjralston1@netscape.net)
  14  *  (mailto:mpt_linux_developer@lsil.com)
  15  *
  16  *  $Id: mptbase.h,v 1.144 2003/01/28 21:31:56 pdelaney Exp $
  17  */
  18 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  19 /*
  20     This program is free software; you can redistribute it and/or modify
  21     it under the terms of the GNU General Public License as published by
  22     the Free Software Foundation; version 2 of the License.
  23
  24     This program is distributed in the hope that it will be useful,
  25     but WITHOUT ANY WARRANTY; without even the implied warranty of
  26     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  27     GNU General Public License for more details.
  28
  29     NO WARRANTY
  30     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  31     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  32     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  33     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  34     solely responsible for determining the appropriateness of using and
  35     distributing the Program and assumes all risks associated with its
  36     exercise of rights under this Agreement, including but not limited to
  37     the risks and costs of program errors, damage to or loss of data,
  38     programs or equipment, and unavailability or interruption of operations.
  39
  40     DISCLAIMER OF LIABILITY
  41     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  42     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  43     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  44     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  45     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  46     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  47     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  48
  49     You should have received a copy of the GNU General Public License
  50     along with this program; if not, write to the Free Software
  51     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  52 */
  53
  54 #ifndef MPTBASE_H_INCLUDED
  55 #define MPTBASE_H_INCLUDED
  56 /*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  57
  58 #include <linux/version.h>
  59 #include <linux/config.h>
  60 #include <linux/kernel.h>
  61 #include <linux/pci.h>
  62
  63 #include "lsi/mpi_type.h"
  64 #include "lsi/mpi.h"            /* Fusion MPI(nterface) basic defs */
  65 #include "lsi/mpi_ioc.h"        /* Fusion MPT IOC(ontroller) defs */
  66 #include "lsi/mpi_cnfg.h"       /* IOC configuration support */
  67 #include "lsi/mpi_init.h"       /* SCSI Host (initiator) protocol support */
  68 #include "lsi/mpi_lan.h"        /* LAN over FC protocol support */
  69 #include "lsi/mpi_raid.h"       /* Integrated Mirroring support */
  70
  71 #include "lsi/mpi_fc.h"         /* Fibre Channel (lowlevel) support */
  72 #include "lsi/mpi_targ.h"       /* SCSI/FCP Target protcol support */
  73 #include "lsi/mpi_tool.h"       /* Tools support */
  74 #include "lsi/fc_log.h"
  75
  76 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  77
  78 #ifndef MODULEAUTHOR
  79 #define MODULEAUTHOR    "LSI Logic Corporation"
  80 #endif
  81
  82 #ifndef COPYRIGHT
  83 #define COPYRIGHT       "Copyright (c) 1999-2004 " MODULEAUTHOR
  84 #endif
  85
  86 #define MPT_LINUX_VERSION_COMMON        "3.01.20"
  87 #define MPT_LINUX_PACKAGE_NAME          "@(#)mptlinux-3.01.20"
  88 #define WHAT_MAGIC_STRING               "@" "(" "#" ")"
  89
  90 #define show_mptmod_ver(s,ver)  \
  91         printk(KERN_INFO "%s %s\n", s, ver);
  92
  93 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  94 /*
  95  *  Fusion MPT(linux) driver configurable stuff...
  96  */
  97 #define MPT_MAX_ADAPTERS                18
  98 #define MPT_MAX_PROTOCOL_DRIVERS        16
  99 #define MPT_MAX_BUS                     1       /* Do not change */
 100 #define MPT_MAX_FC_DEVICES              255
 101 #define MPT_MAX_SCSI_DEVICES            16
 102 #define MPT_LAST_LUN                    255
 103 #define MPT_SENSE_BUFFER_ALLOC          64
 104         /* allow for 256 max sense alloc, but only 255 max request */
 105 #if MPT_SENSE_BUFFER_ALLOC >= 256
 106 #       undef MPT_SENSE_BUFFER_ALLOC
 107 #       define MPT_SENSE_BUFFER_ALLOC   256
 108 #       define MPT_SENSE_BUFFER_SIZE    255
 109 #else
 110 #       define MPT_SENSE_BUFFER_SIZE    MPT_SENSE_BUFFER_ALLOC
 111 #endif
 112
 113 #define MPT_NAME_LENGTH                 32
 114
 115 #define MPT_PROCFS_MPTBASEDIR           "mpt"
 116                                                 /* chg it to "driver/fusion" ? */
 117 #define MPT_PROCFS_SUMMARY_ALL_NODE             MPT_PROCFS_MPTBASEDIR "/summary"
 118 #define MPT_PROCFS_SUMMARY_ALL_PATHNAME         "/proc/" MPT_PROCFS_SUMMARY_ALL_NODE
 119 #define MPT_FW_REV_MAGIC_ID_STRING              "FwRev="
 120
 121 #define  MPT_MAX_REQ_DEPTH              1023
 122 #define  MPT_DEFAULT_REQ_DEPTH          256
 123 #define  MPT_MIN_REQ_DEPTH              128
 124
 125 #define  MPT_MAX_REPLY_DEPTH            MPT_MAX_REQ_DEPTH
 126 #define  MPT_DEFAULT_REPLY_DEPTH        128
 127 #define  MPT_MIN_REPLY_DEPTH            8
 128 #define  MPT_MAX_REPLIES_PER_ISR        32
 129
 130 #define  MPT_MAX_FRAME_SIZE             128
 131 #define  MPT_DEFAULT_FRAME_SIZE         128
 132
 133 #define  MPT_REPLY_FRAME_SIZE           0x40  /* Must be a multiple of 8 */
 134
 135 #define  MPT_SG_REQ_128_SCALE           1
 136 #define  MPT_SG_REQ_96_SCALE            2
 137 #define  MPT_SG_REQ_64_SCALE            4
 138
 139 #define  CAN_SLEEP                      1
 140 #define  NO_SLEEP                       0
 141
 142 #define MPT_COALESCING_TIMEOUT          0x10
 143
 144 /*
 145  * SCSI transfer rate defines.
 146  */
 147 #define MPT_ULTRA320                    0x08
 148 #define MPT_ULTRA160                    0x09
 149 #define MPT_ULTRA2                      0x0A
 150 #define MPT_ULTRA                       0x0C
 151 #define MPT_FAST                        0x19
 152 #define MPT_SCSI                        0x32
 153 #define MPT_ASYNC                       0xFF
 154
 155 #define MPT_NARROW                      0
 156 #define MPT_WIDE                        1
 157
 158 #define C0_1030                         0x08
 159 #define XL_929                          0x01
 160
 161
 162 /*
 163  *      Try to keep these at 2^N-1
 164  */
 165 #define MPT_FC_CAN_QUEUE        127
 166 #define MPT_SCSI_CAN_QUEUE      127
 167
 168 /*
 169  * Set the MAX_SGE value based on user input.
 170  */
 171 #ifdef  CONFIG_FUSION_MAX_SGE
 172 #if     CONFIG_FUSION_MAX_SGE  < 16
 173 #define MPT_SCSI_SG_DEPTH       16
 174 #elif   CONFIG_FUSION_MAX_SGE  > 128
 175 #define MPT_SCSI_SG_DEPTH       128
 176 #else
 177 #define MPT_SCSI_SG_DEPTH       CONFIG_FUSION_MAX_SGE
 178 #endif
 179 #else
 180 #define MPT_SCSI_SG_DEPTH       40
 181 #endif
 182
 183 #ifdef __KERNEL__       /* { */
 184 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 185
 186 #include <linux/proc_fs.h>
 187
 188 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 189 /*
 190  * Attempt semi-consistent error & warning msgs across
 191  * MPT drivers.  NOTE: Users of these macro defs must
 192  * themselves define their own MYNAM.
 193  */
 194 #define MYIOC_s_INFO_FMT                KERN_INFO MYNAM ": %s: "
 195 #define MYIOC_s_NOTE_FMT                KERN_NOTICE MYNAM ": %s: "
 196 #define MYIOC_s_WARN_FMT                KERN_WARNING MYNAM ": %s: WARNING - "
 197 #define MYIOC_s_ERR_FMT                 KERN_ERR MYNAM ": %s: ERROR - "
 198
 199 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 200 /*
 201  *  MPT protocol driver defs...
 202  */
 203 typedef enum {
 204         MPTBASE_DRIVER,         /* MPT base class */
 205         MPTCTL_DRIVER,          /* MPT ioctl class */
 206         MPTSCSIH_DRIVER,        /* MPT SCSI host (initiator) class */
 207         MPTLAN_DRIVER,          /* MPT LAN class */
 208         MPTSTM_DRIVER,          /* MPT SCSI target mode class */
 209         MPTUNKNOWN_DRIVER
 210 } MPT_DRIVER_CLASS;
 211
 212 struct mpt_pci_driver{
 213         int  (*probe) (struct pci_dev *dev, const struct pci_device_id *id);
 214         void (*remove) (struct pci_dev *dev);
 215         void (*shutdown) (struct device * dev);
 216 #ifdef CONFIG_PM
 217         int  (*resume) (struct pci_dev *dev);
 218         int  (*suspend) (struct pci_dev *dev, pm_message_t state);
 219 #endif
 220 };
 221
 222 /*
 223  *  MPT adapter / port / bus / device info structures...
 224  */
 225
 226 typedef union _MPT_FRAME_TRACKER {
 227         struct {
 228                 struct list_head        list;
 229                 u32                      arg1;
 230                 u32                      pad;
 231                 void                    *argp1;
 232         } linkage;
 233         /*
 234          * NOTE: When request frames are free, on the linkage structure
 235          * contets are valid.  All other values are invalid.
 236          * In particular, do NOT reply on offset [2]
 237          * (in words) being the * message context.
 238          * The message context must be reset (computed via base address
 239          * + an offset) prior to issuing any command.
 240          *
 241          * NOTE2: On non-32-bit systems, where pointers are LARGE,
 242          * using the linkage pointers destroys our sacred MsgContext
 243          * field contents.  But we don't care anymore because these
 244          * are now reset in mpt_put_msg_frame() just prior to sending
 245          * a request off to the IOC.
 246          */
 247         struct {
 248                 u32 __hdr[2];
 249                 /*
 250                  * The following _MUST_ match the location of the
 251                  * MsgContext field in the MPT message headers.
 252                  */
 253                 union {
 254                         u32              MsgContext;
 255                         struct {
 256                                 u16      req_idx;       /* Request index */
 257                                 u8       cb_idx;        /* callback function index */
 258                                 u8       rsvd;
 259                         } fld;
 260                 } msgctxu;
 261         } hwhdr;
 262         /*
 263          * Remark: 32 bit identifier:
 264          *  31-24: reserved
 265          *  23-16: call back index
 266          *  15-0 : request index
 267          */
 268 } MPT_FRAME_TRACKER;
 269
 270 /*
 271  *  We might want to view/access a frame as:
 272  *    1) generic request header
 273  *    2) SCSIIORequest
 274  *    3) SCSIIOReply
 275  *    4) MPIDefaultReply
 276  *    5) frame tracker
 277  */
 278 typedef struct _MPT_FRAME_HDR {
 279         union {
 280                 MPIHeader_t             hdr;
 281                 SCSIIORequest_t         scsireq;
 282                 SCSIIOReply_t           sreply;
 283                 ConfigReply_t           configreply;
 284                 MPIDefaultReply_t       reply;
 285                 MPT_FRAME_TRACKER       frame;
 286         } u;
 287 } MPT_FRAME_HDR;
 288
 289 #define MPT_REQ_MSGFLAGS_DROPME         0x80
 290
 291 typedef struct _MPT_SGL_HDR {
 292         SGESimple32_t    sge[1];
 293 } MPT_SGL_HDR;
 294
 295 typedef struct _MPT_SGL64_HDR {
 296         SGESimple64_t    sge[1];
 297 } MPT_SGL64_HDR;
 298
 299 /*
 300  *  System interface register set
 301  */
 302
 303 typedef struct _SYSIF_REGS
 304 {
 305         u32     Doorbell;       /* 00     System<->IOC Doorbell reg  */
 306         u32     WriteSequence;  /* 04     Write Sequence register    */
 307         u32     Diagnostic;     /* 08     Diagnostic register        */
 308         u32     TestBase;       /* 0C     Test Base Address          */
 309         u32     DiagRwData;     /* 10     Read Write Data (fw download)   */
 310         u32     DiagRwAddress;  /* 14     Read Write Address (fw download)*/
 311         u32     Reserved1[6];   /* 18-2F  reserved for future use    */
 312         u32     IntStatus;      /* 30     Interrupt Status           */
 313         u32     IntMask;        /* 34     Interrupt Mask             */
 314         u32     Reserved2[2];   /* 38-3F  reserved for future use    */
 315         u32     RequestFifo;    /* 40     Request Post/Free FIFO     */
 316         u32     ReplyFifo;      /* 44     Reply   Post/Free FIFO     */
 317         u32     Reserved3[2];   /* 48-4F  reserved for future use    */
 318         u32     HostIndex;      /* 50     Host Index register        */
 319         u32     Reserved4[15];  /* 54-8F                             */
 320         u32     Fubar;          /* 90     For Fubar usage            */
 321         u32     Reserved5[27];  /* 94-FF                             */
 322 } SYSIF_REGS;
 323
 324 /*
 325  * NOTE: Use MPI_{DOORBELL,WRITESEQ,DIAG}_xxx defs in lsi/mpi.h
 326  * in conjunction with SYSIF_REGS accesses!
 327  */
 328
 329
 330 /*
 331  *      Dynamic Multi-Pathing specific stuff...
 332  */
 333
 334 /* VirtDevice negoFlags field */
 335 #define MPT_TARGET_NO_NEGO_WIDE         0x01
 336 #define MPT_TARGET_NO_NEGO_SYNC         0x02
 337 #define MPT_TARGET_NO_NEGO_QAS          0x04
 338 #define MPT_TAPE_NEGO_IDP               0x08
 339
 340 /*
 341  *      VirtDevice - FC LUN device or SCSI target device
 342  */
 343 typedef struct _VirtDevice {
 344         struct scsi_device      *device;
 345         u8                       tflags;
 346         u8                       ioc_id;
 347         u8                       target_id;
 348         u8                       bus_id;
 349         u8                       minSyncFactor; /* 0xFF is async */
 350         u8                       maxOffset;     /* 0 if async */
 351         u8                       maxWidth;      /* 0 if narrow, 1 if wide */
 352         u8                       negoFlags;     /* bit field, see above */
 353         u8                       raidVolume;    /* set, if RAID Volume */
 354         u8                       type;          /* byte 0 of Inquiry data */
 355         u8                       cflags;        /* controller flags */
 356         u8                       rsvd1raid;
 357         u16                      fc_phys_lun;
 358         u16                      fc_xlat_lun;
 359         u32                      num_luns;
 360         u32                      luns[8];               /* Max LUNs is 256 */
 361         u8                       pad[4];
 362         u8                       inq_data[8];
 363                 /* IEEE Registered Extended Identifier
 364                    obtained via INQUIRY VPD page 0x83 */
 365                 /* NOTE: Do not separate uniq_prepad and uniq_data
 366                    as they are treateed as a single entity in the code */
 367         u8                       uniq_prepad[8];
 368         u8                       uniq_data[20];
 369         u8                       pad2[4];
 370 } VirtDevice;
 371
 372 /*
 373  *  Fibre Channel (SCSI) target device and associated defines...
 374  */
 375 #define MPT_TARGET_DEFAULT_DV_STATUS    0x00
 376 #define MPT_TARGET_FLAGS_VALID_NEGO     0x01
 377 #define MPT_TARGET_FLAGS_VALID_INQUIRY  0x02
 378 #define MPT_TARGET_FLAGS_Q_YES          0x08
 379 #define MPT_TARGET_FLAGS_VALID_56       0x10
 380 #define MPT_TARGET_FLAGS_SAF_TE_ISSUED  0x20
 381
 382 /*
 383  *      /proc/mpt interface
 384  */
 385 typedef struct {
 386         const char      *name;
 387         mode_t           mode;
 388         int              pad;
 389         read_proc_t     *read_proc;
 390         write_proc_t    *write_proc;
 391 } mpt_proc_entry_t;
 392
 393 #define MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len) \
 394 do { \
 395         len -= offset;                  \
 396         if (len < request) {            \
 397                 *eof = 1;               \
 398                 if (len <= 0)           \
 399                         return 0;       \
 400         } else                          \
 401                 len = request;          \
 402         *start = buf + offset;          \
 403         return len;                     \
 404 } while (0)
 405
 406
 407 /*
 408  *      IOCTL structure and associated defines
 409  */
 410
 411 #define MPT_IOCTL_STATUS_DID_IOCRESET   0x01    /* IOC Reset occurred on the current*/
 412 #define MPT_IOCTL_STATUS_RF_VALID       0x02    /* The Reply Frame is VALID */
 413 #define MPT_IOCTL_STATUS_TIMER_ACTIVE   0x04    /* The timer is running */
 414 #define MPT_IOCTL_STATUS_SENSE_VALID    0x08    /* Sense data is valid */
 415 #define MPT_IOCTL_STATUS_COMMAND_GOOD   0x10    /* Command Status GOOD */
 416 #define MPT_IOCTL_STATUS_TMTIMER_ACTIVE 0x20    /* The TM timer is running */
 417 #define MPT_IOCTL_STATUS_TM_FAILED      0x40    /* User TM request failed */
 418
 419 #define MPTCTL_RESET_OK                 0x01    /* Issue Bus Reset */
 420
 421 typedef struct _MPT_IOCTL {
 422         struct _MPT_ADAPTER     *ioc;
 423         u8                       ReplyFrame[MPT_DEFAULT_FRAME_SIZE];    /* reply frame data */
 424         u8                       sense[MPT_SENSE_BUFFER_ALLOC];
 425         int                      wait_done;     /* wake-up value for this ioc */
 426         u8                       rsvd;
 427         u8                       status;        /* current command status */
 428         u8                       reset;         /* 1 if bus reset allowed */
 429         u8                       target;        /* target for reset */
 430         struct semaphore         sem_ioc;
 431 } MPT_IOCTL;
 432
 433 /*
 434  *  Event Structure and define
 435  */
 436 #define MPTCTL_EVENT_LOG_SIZE           (0x0000000A)
 437 typedef struct _mpt_ioctl_events {
 438         u32     event;          /* Specified by define above */
 439         u32     eventContext;   /* Index or counter */
 440         int     data[2];        /* First 8 bytes of Event Data */
 441 } MPT_IOCTL_EVENTS;
 442
 443 /*
 444  * CONFIGPARM status  defines
 445  */
 446 #define MPT_CONFIG_GOOD         MPI_IOCSTATUS_SUCCESS
 447 #define MPT_CONFIG_ERROR        0x002F
 448
 449 /*
 450  *      Substructure to store SCSI specific configuration page data
 451  */
 452                                                 /* dvStatus defines: */
 453 #define MPT_SCSICFG_NEGOTIATE           0x01    /* Negotiate on next IO */
 454 #define MPT_SCSICFG_NEED_DV             0x02    /* Schedule DV */
 455 #define MPT_SCSICFG_DV_PENDING          0x04    /* DV on this physical id pending */
 456 #define MPT_SCSICFG_DV_NOT_DONE         0x08    /* DV has not been performed */
 457 #define MPT_SCSICFG_BLK_NEGO            0x10    /* WriteSDP1 with WDTR and SDTR disabled */
 458 #define MPT_SCSICFG_RELOAD_IOC_PG3      0x20    /* IOC Pg 3 data is obsolete */
 459                                                 /* Args passed to writeSDP1: */
 460 #define MPT_SCSICFG_USE_NVRAM           0x01    /* WriteSDP1 using NVRAM */
 461 #define MPT_SCSICFG_ALL_IDS             0x02    /* WriteSDP1 to all IDS */
 462 /* #define MPT_SCSICFG_BLK_NEGO         0x10       WriteSDP1 with WDTR and SDTR disabled */
 463
 464 typedef struct _ScsiCfgData {
 465         u32              PortFlags;
 466         int             *nvram;                 /* table of device NVRAM values */
 467         IOCPage2_t      *pIocPg2;               /* table of Raid Volumes */
 468         IOCPage3_t      *pIocPg3;               /* table of physical disks */
 469         IOCPage4_t      *pIocPg4;               /* SEP devices addressing */
 470         dma_addr_t       IocPg4_dma;            /* Phys Addr of IOCPage4 data */
 471         int              IocPg4Sz;              /* IOCPage4 size */
 472         u8               dvStatus[MPT_MAX_SCSI_DEVICES];
 473         int              isRaid;                /* bit field, 1 if RAID */
 474         u8               minSyncFactor;         /* 0xFF if async */
 475         u8               maxSyncOffset;         /* 0 if async */
 476         u8               maxBusWidth;           /* 0 if narrow, 1 if wide */
 477         u8               busType;               /* SE, LVD, HD */
 478         u8               sdp1version;           /* SDP1 version */
 479         u8               sdp1length;            /* SDP1 length  */
 480         u8               sdp0version;           /* SDP0 version */
 481         u8               sdp0length;            /* SDP0 length  */
 482         u8               dvScheduled;           /* 1 if scheduled */
 483         u8               forceDv;               /* 1 to force DV scheduling */
 484         u8               noQas;                 /* Disable QAS for this adapter */
 485         u8               Saf_Te;                /* 1 to force all Processors as SAF-TE if Inquiry data length is too short to check for SAF-TE */
 486         u8               rsvd[1];
 487 } ScsiCfgData;
 488
 489 /*
 490  *  Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
 491  */
 492 typedef struct _MPT_ADAPTER
 493 {
 494         int                      id;            /* Unique adapter id N {0,1,2,...} */
 495         int                      pci_irq;       /* This irq           */
 496         char                     name[MPT_NAME_LENGTH]; /* "iocN"             */
 497         char                    *prod_name;     /* "LSIFC9x9"         */
 498         SYSIF_REGS __iomem      *chip;          /* == c8817000 (mmap) */
 499         SYSIF_REGS __iomem      *pio_chip;      /* Programmed IO (downloadboot) */
 500         u8                       bus_type;
 501         u32                      mem_phys;      /* == f4020000 (mmap) */
 502         u32                      pio_mem_phys;  /* Programmed IO (downloadboot) */
 503         int                      mem_size;      /* mmap memory size */
 504         int                      alloc_total;
 505         u32                      last_state;
 506         int                      active;
 507         u8                      *alloc;         /* frames alloc ptr */
 508         dma_addr_t               alloc_dma;
 509         u32                      alloc_sz;
 510         MPT_FRAME_HDR           *reply_frames;  /* Reply msg frames - rounded up! */
 511         u32                      reply_frames_low_dma;
 512         int                      reply_depth;   /* Num Allocated reply frames */
 513         int                      reply_sz;      /* Reply frame size */
 514         int                      num_chain;     /* Number of chain buffers */
 515                 /* Pool of buffers for chaining. ReqToChain
 516                  * and ChainToChain track index of chain buffers.
 517                  * ChainBuffer (DMA) virt/phys addresses.
 518                  * FreeChainQ (lock) locking mechanisms.
 519                  */
 520         int                     *ReqToChain;
 521         int                     *RequestNB;
 522         int                     *ChainToChain;
 523         u8                      *ChainBuffer;
 524         dma_addr_t               ChainBufferDMA;
 525         struct list_head         FreeChainQ;
 526         spinlock_t               FreeChainQlock;
 527                 /* We (host driver) get to manage our own RequestQueue! */
 528         dma_addr_t               req_frames_dma;
 529         MPT_FRAME_HDR           *req_frames;    /* Request msg frames - rounded up! */
 530         u32                      req_frames_low_dma;
 531         int                      req_depth;     /* Number of request frames */
 532         int                      req_sz;        /* Request frame size (bytes) */
 533         spinlock_t               FreeQlock;
 534         struct list_head         FreeQ;
 535                 /* Pool of SCSI sense buffers for commands coming from
 536                  * the SCSI mid-layer.  We have one 256 byte sense buffer
 537                  * for each REQ entry.
 538                  */
 539         u8                      *sense_buf_pool;
 540         dma_addr_t               sense_buf_pool_dma;
 541         u32                      sense_buf_low_dma;
 542         int                      mtrr_reg;
 543         struct pci_dev          *pcidev;        /* struct pci_dev pointer */
 544         u8                      __iomem *memmap;        /* mmap address */
 545         struct Scsi_Host        *sh;            /* Scsi Host pointer */
 546         ScsiCfgData             spi_data;       /* Scsi config. data */
 547         MPT_IOCTL               *ioctl;         /* ioctl data pointer */
 548         struct proc_dir_entry   *ioc_dentry;
 549         struct _MPT_ADAPTER     *alt_ioc;       /* ptr to 929 bound adapter port */
 550         spinlock_t               diagLock;      /* diagnostic reset lock */
 551         int                      diagPending;
 552         u32                      biosVersion;   /* BIOS version from IO Unit Page 2 */
 553         int                      eventTypes;    /* Event logging parameters */
 554         int                      eventContext;  /* Next event context */
 555         int                      eventLogSize;  /* Max number of cached events */
 556         struct _mpt_ioctl_events *events;       /* pointer to event log */
 557         u8                      *cached_fw;     /* Pointer to FW */
 558         dma_addr_t              cached_fw_dma;
 559         struct list_head         configQ;       /* linked list of config. requests */
 560         int                      hs_reply_idx;
 561 #ifndef MFCNT
 562         u32                      pad0;
 563 #else
 564         u32                      mfcnt;
 565 #endif
 566         u32                      NB_for_64_byte_frame;
 567         u32                      hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)];
 568         u16                      hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)];
 569         IOCFactsReply_t          facts;
 570         PortFactsReply_t         pfacts[2];
 571         FCPortPage0_t            fc_port_page0[2];
 572         LANPage0_t               lan_cnfg_page0;
 573         LANPage1_t               lan_cnfg_page1;
 574         u8                       FirstWhoInit;
 575         u8                       upload_fw;     /* If set, do a fw upload */
 576         u8                       reload_fw;     /* Force a FW Reload on next reset */
 577         u8                       NBShiftFactor;  /* NB Shift Factor based on Block Size (Facts)  */
 578         u8                       pad1[4];
 579         struct list_head         list;
 580         struct net_device       *netdev;
 581 } MPT_ADAPTER;
 582
 583 /*
 584  *  New return value convention:
 585  *    1 = Ok to free associated request frame
 586  *    0 = not Ok ...
 587  */
 588 typedef int (*MPT_CALLBACK)(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
 589 typedef int (*MPT_EVHANDLER)(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply);
 590 typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase);
 591 /* reset_phase defs */
 592 #define MPT_IOC_PRE_RESET               0
 593 #define MPT_IOC_POST_RESET              1
 594 #define MPT_IOC_SETUP_RESET             2
 595
 596 /*
 597  * Invent MPT host event (super-set of MPI Events)
 598  * Fitted to 1030's 64-byte [max] request frame size
 599  */
 600 typedef struct _MPT_HOST_EVENT {
 601         EventNotificationReply_t         MpiEvent;      /* 8 32-bit words! */
 602         u32                              pad[6];
 603         void                            *next;
 604 } MPT_HOST_EVENT;
 605
 606 #define MPT_HOSTEVENT_IOC_BRINGUP       0x91
 607 #define MPT_HOSTEVENT_IOC_RECOVER       0x92
 608
 609 /* Define the generic types based on the size
 610  * of the dma_addr_t type.
 611  */
 612 typedef struct _mpt_sge {
 613         u32             FlagsLength;
 614         dma_addr_t      Address;
 615 } MptSge_t;
 616
 617 #define mpt_addr_size() \
 618         ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \
 619                 MPI_SGE_FLAGS_32_BIT_ADDRESSING)
 620
 621 #define mpt_msg_flags() \
 622         ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
 623                 MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32)
 624
 625 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 626 /*
 627  *  Funky (private) macros...
 628  */
 629 #ifdef MPT_DEBUG
 630 #define dprintk(x)  printk x
 631 #else
 632 #define dprintk(x)
 633 #endif
 634
 635 #ifdef MPT_DEBUG_INIT
 636 #define dinitprintk(x)  printk x
 637 #define DBG_DUMP_FW_REQUEST_FRAME(mfp) \
 638         {       int  i, n = 10;                                         \
 639                 u32 *m = (u32 *)(mfp);                                  \
 640                 printk(KERN_INFO " ");                                  \
 641                 for (i=0; i<n; i++)                                     \
 642                         printk(" %08x", le32_to_cpu(m[i]));             \
 643                 printk("\n");                                           \
 644         }
 645 #else
 646 #define dinitprintk(x)
 647 #define DBG_DUMP_FW_REQUEST_FRAME(mfp)
 648 #endif
 649
 650 #ifdef MPT_DEBUG_EXIT
 651 #define dexitprintk(x)  printk x
 652 #else
 653 #define dexitprintk(x)
 654 #endif
 655
 656 #if defined MPT_DEBUG_FAIL || defined (MPT_DEBUG_SG)
 657 #define dfailprintk(x) printk x
 658 #else
 659 #define dfailprintk(x)
 660 #endif
 661
 662 #ifdef MPT_DEBUG_HANDSHAKE
 663 #define dhsprintk(x)  printk x
 664 #else
 665 #define dhsprintk(x)
 666 #endif
 667
 668 #ifdef MPT_DEBUG_EVENTS
 669 #define devtprintk(x)  printk x
 670 #else
 671 #define devtprintk(x)
 672 #endif
 673
 674 #ifdef MPT_DEBUG_RESET
 675 #define drsprintk(x)  printk x
 676 #else
 677 #define drsprintk(x)
 678 #endif
 679
 680 //#if defined(MPT_DEBUG) || defined(MPT_DEBUG_MSG_FRAME)
 681 #if defined(MPT_DEBUG_MSG_FRAME)
 682 #define dmfprintk(x)  printk x
 683 #define DBG_DUMP_REQUEST_FRAME(mfp) \
 684         {       int  i, n = 24;                                         \
 685                 u32 *m = (u32 *)(mfp);                                  \
 686                 for (i=0; i<n; i++) {                                   \
 687                         if (i && ((i%8)==0))                            \
 688                                 printk("\n");                           \
 689                         printk("%08x ", le32_to_cpu(m[i]));             \
 690                 }                                                       \
 691                 printk("\n");                                           \
 692         }
 693 #else
 694 #define dmfprintk(x)
 695 #define DBG_DUMP_REQUEST_FRAME(mfp)
 696 #endif
 697
 698 #ifdef MPT_DEBUG_IRQ
 699 #define dirqprintk(x)  printk x
 700 #else
 701 #define dirqprintk(x)
 702 #endif
 703
 704 #ifdef MPT_DEBUG_SG
 705 #define dsgprintk(x)  printk x
 706 #else
 707 #define dsgprintk(x)
 708 #endif
 709
 710 #if defined(MPT_DEBUG_DL) || defined(MPT_DEBUG)
 711 #define ddlprintk(x)  printk x
 712 #else
 713 #define ddlprintk(x)
 714 #endif
 715
 716 #ifdef MPT_DEBUG_DV
 717 #define ddvprintk(x)  printk x
 718 #else
 719 #define ddvprintk(x)
 720 #endif
 721
 722 #ifdef MPT_DEBUG_NEGO
 723 #define dnegoprintk(x)  printk x
 724 #else
 725 #define dnegoprintk(x)
 726 #endif
 727
 728 #if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY)
 729 #define ddvtprintk(x)  printk x
 730 #else
 731 #define ddvtprintk(x)
 732 #endif
 733
 734 #ifdef MPT_DEBUG_IOCTL
 735 #define dctlprintk(x) printk x
 736 #else
 737 #define dctlprintk(x)
 738 #endif
 739
 740 #ifdef MPT_DEBUG_REPLY
 741 #define dreplyprintk(x) printk x
 742 #else
 743 #define dreplyprintk(x)
 744 #endif
 745
 746 #ifdef MPT_DEBUG_TM
 747 #define dtmprintk(x) printk x
 748 #define DBG_DUMP_TM_REQUEST_FRAME(mfp) \
 749         {       u32 *m = (u32 *)(mfp);                                  \
 750                 int  i, n = 13;                                         \
 751                 printk("TM_REQUEST:\n");                                \
 752                 for (i=0; i<n; i++) {                                   \
 753                         if (i && ((i%8)==0))                            \
 754                                 printk("\n");                           \
 755                         printk("%08x ", le32_to_cpu(m[i]));             \
 756                 }                                                       \
 757                 printk("\n");                                           \
 758         }
 759 #define DBG_DUMP_TM_REPLY_FRAME(mfp) \
 760         {       u32 *m = (u32 *)(mfp);                                  \
 761                 int  i, n = (le32_to_cpu(m[0]) & 0x00FF0000) >> 16;     \
 762                 printk("TM_REPLY MessageLength=%d:\n", n);              \
 763                 for (i=0; i<n; i++) {                                   \
 764                         if (i && ((i%8)==0))                            \
 765                                 printk("\n");                           \
 766                         printk(" %08x", le32_to_cpu(m[i]));             \
 767                 }                                                       \
 768                 printk("\n");                                           \
 769         }
 770 #else
 771 #define dtmprintk(x)
 772 #define DBG_DUMP_TM_REQUEST_FRAME(mfp)
 773 #define DBG_DUMP_TM_REPLY_FRAME(mfp)
 774 #endif
 775
 776 #ifdef MPT_DEBUG_NEH
 777 #define nehprintk(x) printk x
 778 #else
 779 #define nehprintk(x)
 780 #endif
 781
 782 #if defined(MPT_DEBUG_CONFIG) || defined(MPT_DEBUG)
 783 #define dcprintk(x) printk x
 784 #else
 785 #define dcprintk(x)
 786 #endif
 787
 788 #if defined(MPT_DEBUG_SCSI) || defined(MPT_DEBUG) || defined(MPT_DEBUG_MSG_FRAME)
 789 #define dsprintk(x) printk x
 790 #else
 791 #define dsprintk(x)
 792 #endif
 793
 794
 795 #define MPT_INDEX_2_MFPTR(ioc,idx) \
 796         (MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) )
 797
 798 #define MFPTR_2_MPT_INDEX(ioc,mf) \
 799         (int)( ((u8*)mf - (u8*)(ioc)->req_frames) / (ioc)->req_sz )
 800
 801 #define MPT_INDEX_2_RFPTR(ioc,idx) \
 802         (MPT_FRAME_HDR*)( (u8*)(ioc)->reply_frames + (ioc)->req_sz * (idx) )
 803
 804 #if defined(MPT_DEBUG) || defined(MPT_DEBUG_MSG_FRAME)
 805 #define DBG_DUMP_REPLY_FRAME(mfp) \
 806         {       u32 *m = (u32 *)(mfp);                                  \
 807                 int  i, n = (le32_to_cpu(m[0]) & 0x00FF0000) >> 16;     \
 808                 printk(KERN_INFO " ");                                  \
 809                 for (i=0; i<n; i++)                                     \
 810                         printk(" %08x", le32_to_cpu(m[i]));             \
 811                 printk("\n");                                           \
 812         }
 813 #define DBG_DUMP_REQUEST_FRAME_HDR(mfp) \
 814         {       int  i, n = 3;                                          \
 815                 u32 *m = (u32 *)(mfp);                                  \
 816                 printk(KERN_INFO " ");                                  \
 817                 for (i=0; i<n; i++)                                     \
 818                         printk(" %08x", le32_to_cpu(m[i]));             \
 819                 printk("\n");                                           \
 820         }
 821 #else
 822 #define DBG_DUMP_REPLY_FRAME(mfp)
 823 #define DBG_DUMP_REQUEST_FRAME_HDR(mfp)
 824 #endif
 825
 826
 827 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 828
 829 #define SCSI_STD_SENSE_BYTES    18
 830 #define SCSI_STD_INQUIRY_BYTES  36
 831 #define SCSI_MAX_INQUIRY_BYTES  96
 832
 833 /*
 834  * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers
 835  * Private to the driver.
 836  */
 837 /* LOCAL structure and fields used when processing
 838  * internally generated commands. These include:
 839  * bus scan, dv and config requests.
 840  */
 841 typedef struct _MPT_LOCAL_REPLY {
 842         ConfigPageHeader_t header;
 843         int     completion;
 844         u8      sense[SCSI_STD_SENSE_BYTES];
 845         u8      scsiStatus;
 846         u8      skip;
 847         u32     pad;
 848 } MPT_LOCAL_REPLY;
 849
 850 #define MPT_HOST_BUS_UNKNOWN            (0xFF)
 851 #define MPT_HOST_TOO_MANY_TM            (0x05)
 852 #define MPT_HOST_NVRAM_INVALID          (0xFFFFFFFF)
 853 #define MPT_HOST_NO_CHAIN               (0xFFFFFFFF)
 854 #define MPT_NVRAM_MASK_TIMEOUT          (0x000000FF)
 855 #define MPT_NVRAM_SYNC_MASK             (0x0000FF00)
 856 #define MPT_NVRAM_SYNC_SHIFT            (8)
 857 #define MPT_NVRAM_DISCONNECT_ENABLE     (0x00010000)
 858 #define MPT_NVRAM_ID_SCAN_ENABLE        (0x00020000)
 859 #define MPT_NVRAM_LUN_SCAN_ENABLE       (0x00040000)
 860 #define MPT_NVRAM_TAG_QUEUE_ENABLE      (0x00080000)
 861 #define MPT_NVRAM_WIDE_DISABLE          (0x00100000)
 862 #define MPT_NVRAM_BOOT_CHOICE           (0x00200000)
 863
 864 /* The TM_STATE variable is used to provide strict single threading of TM
 865  * requests as well as communicate TM error conditions.
 866  */
 867 #define TM_STATE_NONE          (0)
 868 #define TM_STATE_IN_PROGRESS   (1)
 869 #define TM_STATE_ERROR         (2)
 870
 871 typedef enum {
 872         FC,
 873         SCSI,
 874         SAS
 875 } BUS_TYPE;
 876
 877 typedef struct _MPT_SCSI_HOST {
 878         MPT_ADAPTER              *ioc;
 879         int                       port;
 880         u32                       pad0;
 881         struct scsi_cmnd        **ScsiLookup;
 882         VirtDevice              **Targets;
 883         MPT_LOCAL_REPLY          *pLocal;               /* used for internal commands */
 884         struct timer_list         timer;
 885                 /* Pool of memory for holding SCpnts before doing
 886                  * OS callbacks. freeQ is the free pool.
 887                  */
 888         u8                        tmPending;
 889         u8                        resetPending;
 890         u8                        negoNvram;            /* DV disabled, nego NVRAM */
 891         u8                        pad1;
 892         u8                        tmState;
 893         u8                        rsvd[2];
 894         MPT_FRAME_HDR            *cmdPtr;               /* Ptr to nonOS request */
 895         struct scsi_cmnd         *abortSCpnt;
 896         MPT_LOCAL_REPLY           localReply;           /* internal cmd reply struct */
 897         unsigned long             hard_resets;          /* driver forced bus resets count */
 898         unsigned long             soft_resets;          /* fw/external bus resets count */
 899         unsigned long             timeouts;             /* cmd timeouts */
 900         ushort                    sel_timeout[MPT_MAX_FC_DEVICES];
 901 } MPT_SCSI_HOST;
 902
 903 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 904 /*
 905  *      More Dynamic Multi-Pathing stuff...
 906  */
 907
 908 /* Forward decl, a strange C thing, to prevent gcc compiler warnings */
 909 struct scsi_cmnd;
 910
 911 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 912 /*
 913  * Generic structure passed to the base mpt_config function.
 914  */
 915 typedef struct _x_config_parms {
 916         struct list_head         linkage;       /* linked list */
 917         struct timer_list        timer;         /* timer function for this request  */
 918         ConfigPageHeader_t      *hdr;
 919         dma_addr_t               physAddr;
 920         int                      wait_done;     /* wait for this request */
 921         u32                      pageAddr;      /* properly formatted */
 922         u8                       action;
 923         u8                       dir;
 924         u8                       timeout;       /* seconds */
 925         u8                       pad1;
 926         u16                      status;
 927         u16                      pad2;
 928 } CONFIGPARMS;
 929
 930 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 931 /*
 932  *  Public entry points...
 933  */
 934 extern int       mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass);
 935 extern void      mpt_deregister(int cb_idx);
 936 extern int       mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc);
 937 extern void      mpt_event_deregister(int cb_idx);
 938 extern int       mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func);
 939 extern void      mpt_reset_deregister(int cb_idx);
 940 extern int       mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx);
 941 extern void      mpt_device_driver_deregister(int cb_idx);
 942 extern MPT_FRAME_HDR    *mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc);
 943 extern void      mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 944 extern void      mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 945 extern void      mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr);
 946
 947 extern int       mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
 948 extern int       mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
 949 extern u32       mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
 950 extern void      mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
 951 extern int       mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
 952 extern int       mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
 953 extern int       mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
 954 extern void      mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
 955 extern void      mpt_free_fw_memory(MPT_ADAPTER *ioc);
 956 extern int       mpt_findImVolumes(MPT_ADAPTER *ioc);
 957 extern int       mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
 958
 959 /*
 960  *  Public data decl's...
 961  */
 962 extern struct list_head   ioc_list;
 963 extern struct proc_dir_entry    *mpt_proc_root_dir;
 964
 965 extern int                mpt_lan_index;        /* needed by mptlan.c */
 966 extern int                mpt_stm_index;        /* needed by mptstm.c */
 967
 968 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 969 #endif          /* } __KERNEL__ */
 970
 971 #if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__)
 972 #define CAST_U32_TO_PTR(x)      ((void *)(u64)x)
 973 #define CAST_PTR_TO_U32(x)      ((u32)(u64)x)
 974 #else
 975 #define CAST_U32_TO_PTR(x)      ((void *)x)
 976 #define CAST_PTR_TO_U32(x)      ((u32)x)
 977 #endif
 978
 979 #define MPT_PROTOCOL_FLAGS_c_c_c_c(pflags) \
 980         ((pflags) & MPI_PORTFACTS_PROTOCOL_INITIATOR)   ? 'I' : 'i',    \
 981         ((pflags) & MPI_PORTFACTS_PROTOCOL_TARGET)      ? 'T' : 't',    \
 982         ((pflags) & MPI_PORTFACTS_PROTOCOL_LAN)         ? 'L' : 'l',    \
 983         ((pflags) & MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)  ? 'B' : 'b'
 984
 985 /*
 986  *  Shifted SGE Defines - Use in SGE with FlagsLength member.
 987  *  Otherwise, use MPI_xxx defines (refer to "lsi/mpi.h" header).
 988  *  Defaults: 32 bit SGE, SYSTEM_ADDRESS if direction bit is 0, read
 989  */
 990 #define MPT_TRANSFER_IOC_TO_HOST                (0x00000000)
 991 #define MPT_TRANSFER_HOST_TO_IOC                (0x04000000)
 992 #define MPT_SGE_FLAGS_LAST_ELEMENT              (0x80000000)
 993 #define MPT_SGE_FLAGS_END_OF_BUFFER             (0x40000000)
 994 #define MPT_SGE_FLAGS_LOCAL_ADDRESS             (0x08000000)
 995 #define MPT_SGE_FLAGS_DIRECTION                 (0x04000000)
 996 #define MPT_SGE_FLAGS_ADDRESSING                (mpt_addr_size() << MPI_SGE_FLAGS_SHIFT)
 997 #define MPT_SGE_FLAGS_END_OF_LIST               (0x01000000)
 998
 999 #define MPT_SGE_FLAGS_TRANSACTION_ELEMENT       (0x00000000)
1000 #define MPT_SGE_FLAGS_SIMPLE_ELEMENT            (0x10000000)
1001 #define MPT_SGE_FLAGS_CHAIN_ELEMENT             (0x30000000)
1002 #define MPT_SGE_FLAGS_ELEMENT_MASK              (0x30000000)
1003
1004 #define MPT_SGE_FLAGS_SSIMPLE_READ \
1005         (MPT_SGE_FLAGS_LAST_ELEMENT |   \
1006          MPT_SGE_FLAGS_END_OF_BUFFER |  \
1007          MPT_SGE_FLAGS_END_OF_LIST |    \
1008          MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
1009          MPT_SGE_FLAGS_ADDRESSING | \
1010          MPT_TRANSFER_IOC_TO_HOST)
1011 #define MPT_SGE_FLAGS_SSIMPLE_WRITE \
1012         (MPT_SGE_FLAGS_LAST_ELEMENT |   \
1013          MPT_SGE_FLAGS_END_OF_BUFFER |  \
1014          MPT_SGE_FLAGS_END_OF_LIST |    \
1015          MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
1016          MPT_SGE_FLAGS_ADDRESSING | \
1017          MPT_TRANSFER_HOST_TO_IOC)
1018
1019 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1020 #endif
1021