[XFRM]: skb_cow_data() does not set proper owner for new skbs.
[linux-2.6/verdex.git] / drivers / usb / gadget / pxa2xx_udc.h
blob1f3a7d999da7e31dfbcac893897b2cec06aa4cc0
1 /*
2 * linux/drivers/usb/gadget/pxa2xx_udc.h
3 * Intel PXA2xx on-chip full speed USB device controller
5 * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
6 * Copyright (C) 2003 David Brownell
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #ifndef __LINUX_USB_GADGET_PXA2XX_H
25 #define __LINUX_USB_GADGET_PXA2XX_H
27 #include <linux/types.h>
29 /*-------------------------------------------------------------------------*/
31 /* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
32 #define UFNRH_SIR (1 << 7) /* SOF interrupt request */
33 #define UFNRH_SIM (1 << 6) /* SOF interrupt mask */
34 #define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */
35 #define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */
36 #define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */
38 /* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
39 #define UDCCFR UDC_RES2 /* UDC Control Function Register */
40 #define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */
41 #define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */
43 /* latest pxa255 errata define new "must be one" bits in UDCCFR */
44 #define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM))
46 /*-------------------------------------------------------------------------*/
48 struct pxa2xx_udc;
50 struct pxa2xx_ep {
51 struct usb_ep ep;
52 struct pxa2xx_udc *dev;
54 const struct usb_endpoint_descriptor *desc;
55 struct list_head queue;
56 unsigned long pio_irqs;
57 unsigned long dma_irqs;
58 short dma;
60 unsigned short fifo_size;
61 u8 bEndpointAddress;
62 u8 bmAttributes;
64 unsigned stopped : 1;
65 unsigned dma_fixup : 1;
67 /* UDCCS = UDC Control/Status for this EP
68 * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
69 * UDDR = UDC Endpoint Data Register (the fifo)
70 * DRCM = DMA Request Channel Map
72 volatile u32 *reg_udccs;
73 volatile u32 *reg_ubcr;
74 volatile u32 *reg_uddr;
75 #ifdef USE_DMA
76 volatile u32 *reg_drcmr;
77 #define drcmr(n) .reg_drcmr = & DRCMR ## n ,
78 #else
79 #define drcmr(n)
80 #endif
83 struct pxa2xx_request {
84 struct usb_request req;
85 struct list_head queue;
88 enum ep0_state {
89 EP0_IDLE,
90 EP0_IN_DATA_PHASE,
91 EP0_OUT_DATA_PHASE,
92 EP0_END_XFER,
93 EP0_STALL,
96 #define EP0_FIFO_SIZE ((unsigned)16)
97 #define BULK_FIFO_SIZE ((unsigned)64)
98 #define ISO_FIFO_SIZE ((unsigned)256)
99 #define INT_FIFO_SIZE ((unsigned)8)
101 struct udc_stats {
102 struct ep0stats {
103 unsigned long ops;
104 unsigned long bytes;
105 } read, write;
106 unsigned long irqs;
109 #ifdef CONFIG_USB_PXA2XX_SMALL
110 /* when memory's tight, SMALL config saves code+data. */
111 #undef USE_DMA
112 #define PXA_UDC_NUM_ENDPOINTS 3
113 #endif
115 #ifndef PXA_UDC_NUM_ENDPOINTS
116 #define PXA_UDC_NUM_ENDPOINTS 16
117 #endif
119 struct pxa2xx_udc {
120 struct usb_gadget gadget;
121 struct usb_gadget_driver *driver;
123 enum ep0_state ep0state;
124 struct udc_stats stats;
125 unsigned got_irq : 1,
126 vbus : 1,
127 pullup : 1,
128 has_cfr : 1,
129 req_pending : 1,
130 req_std : 1,
131 req_config : 1;
133 #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
134 struct timer_list timer;
136 struct device *dev;
137 struct pxa2xx_udc_mach_info *mach;
138 u64 dma_mask;
139 struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS];
142 /*-------------------------------------------------------------------------*/
144 #ifdef CONFIG_ARCH_LUBBOCK
145 #include <asm/arch/lubbock.h>
146 /* lubbock can also report usb connect/disconnect irqs */
148 #ifdef DEBUG
149 #define HEX_DISPLAY(n) if (machine_is_lubbock()) { LUB_HEXLED = (n); }
150 #endif
152 #endif
154 /*-------------------------------------------------------------------------*/
156 /* LEDs are only for debug */
157 #ifndef HEX_DISPLAY
158 #define HEX_DISPLAY(n) do {} while(0)
159 #endif
161 #ifdef DEBUG
162 #include <asm/leds.h>
164 #define LED_CONNECTED_ON leds_event(led_green_on)
165 #define LED_CONNECTED_OFF do { \
166 leds_event(led_green_off); \
167 HEX_DISPLAY(0); \
168 } while(0)
169 #endif
171 #ifndef LED_CONNECTED_ON
172 #define LED_CONNECTED_ON do {} while(0)
173 #define LED_CONNECTED_OFF do {} while(0)
174 #endif
176 /*-------------------------------------------------------------------------*/
178 static struct pxa2xx_udc *the_controller;
180 /* one GPIO should be used to detect host disconnect */
181 static inline int is_usb_connected(void)
183 if (!the_controller->mach->udc_is_connected)
184 return 1;
185 return the_controller->mach->udc_is_connected();
188 /* one GPIO should force the host to see this device (or not) */
189 static inline void make_usb_disappear(void)
191 if (!the_controller->mach->udc_command)
192 return;
193 the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
196 static inline void let_usb_appear(void)
198 if (!the_controller->mach->udc_command)
199 return;
200 the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
203 /*-------------------------------------------------------------------------*/
206 * Debugging support vanishes in non-debug builds. DBG_NORMAL should be
207 * mostly silent during normal use/testing, with no timing side-effects.
209 #define DBG_NORMAL 1 /* error paths, device state transitions */
210 #define DBG_VERBOSE 2 /* add some success path trace info */
211 #define DBG_NOISY 3 /* ... even more: request level */
212 #define DBG_VERY_NOISY 4 /* ... even more: packet level */
214 #ifdef DEBUG
216 static const char *state_name[] = {
217 "EP0_IDLE",
218 "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
219 "EP0_END_XFER", "EP0_STALL"
222 #define DMSG(stuff...) printk(KERN_DEBUG "udc: " stuff)
224 #ifdef VERBOSE
225 # define UDC_DEBUG DBG_VERBOSE
226 #else
227 # define UDC_DEBUG DBG_NORMAL
228 #endif
230 static void __attribute__ ((__unused__))
231 dump_udccr(const char *label)
233 u32 udccr = UDCCR;
234 DMSG("%s %02X =%s%s%s%s%s%s%s%s\n",
235 label, udccr,
236 (udccr & UDCCR_REM) ? " rem" : "",
237 (udccr & UDCCR_RSTIR) ? " rstir" : "",
238 (udccr & UDCCR_SRM) ? " srm" : "",
239 (udccr & UDCCR_SUSIR) ? " susir" : "",
240 (udccr & UDCCR_RESIR) ? " resir" : "",
241 (udccr & UDCCR_RSM) ? " rsm" : "",
242 (udccr & UDCCR_UDA) ? " uda" : "",
243 (udccr & UDCCR_UDE) ? " ude" : "");
246 static void __attribute__ ((__unused__))
247 dump_udccs0(const char *label)
249 u32 udccs0 = UDCCS0;
251 DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n",
252 label, state_name[the_controller->ep0state], udccs0,
253 (udccs0 & UDCCS0_SA) ? " sa" : "",
254 (udccs0 & UDCCS0_RNE) ? " rne" : "",
255 (udccs0 & UDCCS0_FST) ? " fst" : "",
256 (udccs0 & UDCCS0_SST) ? " sst" : "",
257 (udccs0 & UDCCS0_DRWF) ? " dwrf" : "",
258 (udccs0 & UDCCS0_FTF) ? " ftf" : "",
259 (udccs0 & UDCCS0_IPR) ? " ipr" : "",
260 (udccs0 & UDCCS0_OPR) ? " opr" : "");
263 static void __attribute__ ((__unused__))
264 dump_state(struct pxa2xx_udc *dev)
266 u32 tmp;
267 unsigned i;
269 DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
270 is_usb_connected() ? "host " : "disconnected",
271 state_name[dev->ep0state],
272 UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
273 dump_udccr("udccr");
274 if (dev->has_cfr) {
275 tmp = UDCCFR;
276 DMSG("udccfr %02X =%s%s\n", tmp,
277 (tmp & UDCCFR_AREN) ? " aren" : "",
278 (tmp & UDCCFR_ACM) ? " acm" : "");
281 if (!dev->driver) {
282 DMSG("no gadget driver bound\n");
283 return;
284 } else
285 DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
287 if (!is_usb_connected())
288 return;
290 dump_udccs0 ("udccs0");
291 DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
292 dev->stats.write.bytes, dev->stats.write.ops,
293 dev->stats.read.bytes, dev->stats.read.ops);
295 for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
296 if (dev->ep [i].desc == 0)
297 continue;
298 DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
302 #else
304 #define DMSG(stuff...) do{}while(0)
306 #define dump_udccr(x) do{}while(0)
307 #define dump_udccs0(x) do{}while(0)
308 #define dump_state(x) do{}while(0)
310 #define UDC_DEBUG ((unsigned)0)
312 #endif
314 #define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
316 #define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
317 #define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
320 #endif /* __LINUX_USB_GADGET_PXA2XX_H */