2 * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
4 * Written 1994-1999 by Avery Pennarun.
5 * Derived from skeleton.c by Donald Becker.
7 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8 * for sponsoring the further development of this driver.
10 * **********************
12 * The original copyright of skeleton.c was as follows:
14 * skeleton.c Written 1993 by Donald Becker.
15 * Copyright 1993 United States Government as represented by the
16 * Director, National Security Agency. This software may only be used
17 * and distributed according to the terms of the GNU General Public License as
18 * modified by SRC, incorporated herein by reference.
20 * **********************
22 * For more details, see drivers/net/arcnet.c
24 * **********************
27 #include <linux/module.h>
28 #include <linux/init.h>
29 #include <linux/if_arp.h>
31 #include <linux/netdevice.h>
32 #include <linux/skbuff.h>
33 #include <linux/arcdevice.h>
35 #define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n"
38 static void rx(struct net_device
*dev
, int bufnum
,
39 struct archdr
*pkthdr
, int length
);
40 static int build_header(struct sk_buff
*skb
, struct net_device
*dev
,
41 unsigned short type
, uint8_t daddr
);
42 static int prepare_tx(struct net_device
*dev
, struct archdr
*pkt
, int length
,
45 struct ArcProto rawmode_proto
=
50 .build_header
= build_header
,
51 .prepare_tx
= prepare_tx
,
57 static int __init
arcnet_raw_init(void)
63 for (count
= 0; count
< 256; count
++)
64 if (arc_proto_map
[count
] == arc_proto_default
)
65 arc_proto_map
[count
] = &rawmode_proto
;
67 /* for raw mode, we only set the bcast proto if there's no better one */
68 if (arc_bcast_proto
== arc_proto_default
)
69 arc_bcast_proto
= &rawmode_proto
;
71 arc_proto_default
= &rawmode_proto
;
75 static void __exit
arcnet_raw_exit(void)
77 arcnet_unregister_proto(&rawmode_proto
);
80 module_init(arcnet_raw_init
);
81 module_exit(arcnet_raw_exit
);
83 MODULE_LICENSE("GPL");
87 static void rx(struct net_device
*dev
, int bufnum
,
88 struct archdr
*pkthdr
, int length
)
90 struct arcnet_local
*lp
= dev
->priv
;
92 struct archdr
*pkt
= pkthdr
;
95 BUGMSG(D_DURING
, "it's a raw packet (length=%d)\n", length
);
102 skb
= alloc_skb(length
+ ARC_HDR_SIZE
, GFP_ATOMIC
);
104 BUGMSG(D_NORMAL
, "Memory squeeze, dropping packet.\n");
105 lp
->stats
.rx_dropped
++;
108 skb_put(skb
, length
+ ARC_HDR_SIZE
);
111 pkt
= (struct archdr
*) skb
->data
;
113 skb
->mac
.raw
= skb
->data
;
114 skb_pull(skb
, ARC_HDR_SIZE
);
116 /* up to sizeof(pkt->soft) has already been copied from the card */
117 memcpy(pkt
, pkthdr
, sizeof(struct archdr
));
118 if (length
> sizeof(pkt
->soft
))
119 lp
->hw
.copy_from_card(dev
, bufnum
, ofs
+ sizeof(pkt
->soft
),
120 pkt
->soft
.raw
+ sizeof(pkt
->soft
),
121 length
- sizeof(pkt
->soft
));
123 BUGLVL(D_SKB
) arcnet_dump_skb(dev
, skb
, "rx");
125 skb
->protocol
= __constant_htons(ETH_P_ARCNET
);
128 dev
->last_rx
= jiffies
;
133 * Create the ARCnet hard/soft headers for raw mode.
134 * There aren't any soft headers in raw mode - not even the protocol id.
136 static int build_header(struct sk_buff
*skb
, struct net_device
*dev
,
137 unsigned short type
, uint8_t daddr
)
139 int hdr_size
= ARC_HDR_SIZE
;
140 struct archdr
*pkt
= (struct archdr
*) skb_push(skb
, hdr_size
);
143 * Set the source hardware address.
145 * This is pretty pointless for most purposes, but it can help in
146 * debugging. ARCnet does not allow us to change the source address in
147 * the actual packet sent)
149 pkt
->hard
.source
= *dev
->dev_addr
;
151 /* see linux/net/ethernet/eth.c to see where I got the following */
153 if (dev
->flags
& (IFF_LOOPBACK
| IFF_NOARP
)) {
155 * FIXME: fill in the last byte of the dest ipaddr here to better
156 * comply with RFC1051 in "noarp" mode.
161 /* otherwise, just fill it in and go! */
162 pkt
->hard
.dest
= daddr
;
164 return hdr_size
; /* success */
168 static int prepare_tx(struct net_device
*dev
, struct archdr
*pkt
, int length
,
171 struct arcnet_local
*lp
= dev
->priv
;
172 struct arc_hardware
*hard
= &pkt
->hard
;
175 BUGMSG(D_DURING
, "prepare_tx: txbufs=%d/%d/%d\n",
176 lp
->next_tx
, lp
->cur_tx
, bufnum
);
178 length
-= ARC_HDR_SIZE
; /* hard header is not included in packet length */
181 /* should never happen! other people already check for this. */
182 BUGMSG(D_NORMAL
, "Bug! prepare_tx with size %d (> %d)\n",
186 if (length
> MinTU
) {
188 hard
->offset
[1] = ofs
= 512 - length
;
189 } else if (length
> MTU
) {
191 hard
->offset
[1] = ofs
= 512 - length
- 3;
193 hard
->offset
[0] = ofs
= 256 - length
;
195 BUGMSG(D_DURING
, "prepare_tx: length=%d ofs=%d\n",
198 lp
->hw
.copy_to_card(dev
, bufnum
, 0, hard
, ARC_HDR_SIZE
);
199 lp
->hw
.copy_to_card(dev
, bufnum
, ofs
, &pkt
->soft
, length
);
201 lp
->lastload_dest
= hard
->dest
;