[CONNECTOR]: Initialize subsystem earlier.
[linux-2.6/verdex.git] / drivers / cdrom / gscd.c
blobad5464ab99bce830fc22984ff1cf77ac176c51d2
1 #define GSCD_VERSION "0.4a Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>"
3 /*
4 linux/drivers/block/gscd.c - GoldStar R420 CDROM driver
6 Copyright (C) 1995 Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
7 based upon pre-works by Eberhard Moenkeberg <emoenke@gwdg.de>
10 For all kind of other information about the GoldStar CDROM
11 and this Linux device driver I installed a WWW-URL:
12 http://linux.rz.fh-hannover.de/~raupach
15 If you are the editor of a Linux CD, you should
16 enable gscd.c within your boot floppy kernel and
17 send me one of your CDs for free.
20 --------------------------------------------------------------------
21 This program is free software; you can redistribute it and/or modify
22 it under the terms of the GNU General Public License as published by
23 the Free Software Foundation; either version 2, or (at your option)
24 any later version.
26 This program is distributed in the hope that it will be useful,
27 but WITHOUT ANY WARRANTY; without even the implied warranty of
28 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
29 GNU General Public License for more details.
31 You should have received a copy of the GNU General Public License
32 along with this program; if not, write to the Free Software
33 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
35 --------------------------------------------------------------------
37 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x
38 Removed init_module & cleanup_module in favor of
39 module_init & module_exit.
40 Torben Mathiasen <tmm@image.dk>
44 /* These settings are for various debug-level. Leave they untouched ... */
45 #define NO_GSCD_DEBUG
46 #define NO_IOCTL_DEBUG
47 #define NO_MODULE_DEBUG
48 #define NO_FUTURE_WORK
49 /*------------------------*/
51 #include <linux/module.h>
53 #include <linux/slab.h>
54 #include <linux/errno.h>
55 #include <linux/signal.h>
56 #include <linux/sched.h>
57 #include <linux/timer.h>
58 #include <linux/fs.h>
59 #include <linux/mm.h>
60 #include <linux/kernel.h>
61 #include <linux/cdrom.h>
62 #include <linux/ioport.h>
63 #include <linux/major.h>
64 #include <linux/string.h>
65 #include <linux/init.h>
67 #include <asm/system.h>
68 #include <asm/io.h>
69 #include <asm/uaccess.h>
71 #define MAJOR_NR GOLDSTAR_CDROM_MAJOR
72 #include <linux/blkdev.h>
73 #include "gscd.h"
75 static int gscdPresent = 0;
77 static unsigned char gscd_buf[2048]; /* buffer for block size conversion */
78 static int gscd_bn = -1;
79 static short gscd_port = GSCD_BASE_ADDR;
80 module_param_named(gscd, gscd_port, short, 0);
82 /* Kommt spaeter vielleicht noch mal dran ...
83 * static DECLARE_WAIT_QUEUE_HEAD(gscd_waitq);
86 static void gscd_read_cmd(struct request *req);
87 static void gscd_hsg2msf(long hsg, struct msf *msf);
88 static void gscd_bin2bcd(unsigned char *p);
90 /* Schnittstellen zum Kern/FS */
92 static void __do_gscd_request(unsigned long dummy);
93 static int gscd_ioctl(struct inode *, struct file *, unsigned int,
94 unsigned long);
95 static int gscd_open(struct inode *, struct file *);
96 static int gscd_release(struct inode *, struct file *);
97 static int check_gscd_med_chg(struct gendisk *disk);
99 /* GoldStar Funktionen */
101 static void cmd_out(int, char *, char *, int);
102 static void cmd_status(void);
103 static void init_cd_drive(int);
105 static int get_status(void);
106 static void clear_Audio(void);
107 static void cc_invalidate(void);
109 /* some things for the next version */
110 #ifdef FUTURE_WORK
111 static void update_state(void);
112 static long gscd_msf2hsg(struct msf *mp);
113 static int gscd_bcd2bin(unsigned char bcd);
114 #endif
117 /* lo-level cmd-Funktionen */
119 static void cmd_info_in(char *, int);
120 static void cmd_end(void);
121 static void cmd_read_b(char *, int, int);
122 static void cmd_read_w(char *, int, int);
123 static int cmd_unit_alive(void);
124 static void cmd_write_cmd(char *);
127 /* GoldStar Variablen */
129 static int curr_drv_state;
130 static int drv_states[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
131 static int drv_mode;
132 static int disk_state;
133 static int speed;
134 static int ndrives;
136 static unsigned char drv_num_read;
137 static unsigned char f_dsk_valid;
138 static unsigned char current_drive;
139 static unsigned char f_drv_ok;
142 static char f_AudioPlay;
143 static char f_AudioPause;
144 static int AudioStart_m;
145 static int AudioStart_f;
146 static int AudioEnd_m;
147 static int AudioEnd_f;
149 static DEFINE_TIMER(gscd_timer, NULL, 0, 0);
150 static DEFINE_SPINLOCK(gscd_lock);
151 static struct request_queue *gscd_queue;
153 static struct block_device_operations gscd_fops = {
154 .owner = THIS_MODULE,
155 .open = gscd_open,
156 .release = gscd_release,
157 .ioctl = gscd_ioctl,
158 .media_changed = check_gscd_med_chg,
162 * Checking if the media has been changed
163 * (not yet implemented)
165 static int check_gscd_med_chg(struct gendisk *disk)
167 #ifdef GSCD_DEBUG
168 printk("gscd: check_med_change\n");
169 #endif
170 return 0;
174 #ifndef MODULE
175 /* Using new interface for kernel-parameters */
177 static int __init gscd_setup(char *str)
179 int ints[2];
180 (void) get_options(str, ARRAY_SIZE(ints), ints);
182 if (ints[0] > 0) {
183 gscd_port = ints[1];
185 return 1;
188 __setup("gscd=", gscd_setup);
190 #endif
192 static int gscd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
193 unsigned long arg)
195 unsigned char to_do[10];
196 unsigned char dummy;
199 switch (cmd) {
200 case CDROMSTART: /* Spin up the drive */
201 /* Don't think we can do this. Even if we could,
202 * I think the drive times out and stops after a while
203 * anyway. For now, ignore it.
205 return 0;
207 case CDROMRESUME: /* keine Ahnung was das ist */
208 return 0;
211 case CDROMEJECT:
212 cmd_status();
213 to_do[0] = CMD_TRAY_CTL;
214 cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
216 return 0;
218 default:
219 return -EINVAL;
226 * Take care of the different block sizes between cdrom and Linux.
227 * When Linux gets variable block sizes this will probably go away.
230 static void gscd_transfer(struct request *req)
232 while (req->nr_sectors > 0 && gscd_bn == req->sector / 4) {
233 long offs = (req->sector & 3) * 512;
234 memcpy(req->buffer, gscd_buf + offs, 512);
235 req->nr_sectors--;
236 req->sector++;
237 req->buffer += 512;
243 * I/O request routine called from Linux kernel.
246 static void do_gscd_request(request_queue_t * q)
248 __do_gscd_request(0);
251 static void __do_gscd_request(unsigned long dummy)
253 struct request *req;
254 unsigned int block;
255 unsigned int nsect;
257 repeat:
258 req = elv_next_request(gscd_queue);
259 if (!req)
260 return;
262 block = req->sector;
263 nsect = req->nr_sectors;
265 if (req->sector == -1)
266 goto out;
268 if (req->cmd != READ) {
269 printk("GSCD: bad cmd %lu\n", rq_data_dir(req));
270 end_request(req, 0);
271 goto repeat;
274 gscd_transfer(req);
276 /* if we satisfied the request from the buffer, we're done. */
278 if (req->nr_sectors == 0) {
279 end_request(req, 1);
280 goto repeat;
282 #ifdef GSCD_DEBUG
283 printk("GSCD: block %d, nsect %d\n", block, nsect);
284 #endif
285 gscd_read_cmd(req);
286 out:
287 return;
293 * Check the result of the set-mode command. On success, send the
294 * read-data command.
297 static void gscd_read_cmd(struct request *req)
299 long block;
300 struct gscd_Play_msf gscdcmd;
301 char cmd[] = { CMD_READ, 0x80, 0, 0, 0, 0, 1 }; /* cmd mode M-S-F secth sectl */
303 cmd_status();
304 if (disk_state & (ST_NO_DISK | ST_DOOR_OPEN)) {
305 printk("GSCD: no disk or door open\n");
306 end_request(req, 0);
307 } else {
308 if (disk_state & ST_INVALID) {
309 printk("GSCD: disk invalid\n");
310 end_request(req, 0);
311 } else {
312 gscd_bn = -1; /* purge our buffer */
313 block = req->sector / 4;
314 gscd_hsg2msf(block, &gscdcmd.start); /* cvt to msf format */
316 cmd[2] = gscdcmd.start.min;
317 cmd[3] = gscdcmd.start.sec;
318 cmd[4] = gscdcmd.start.frame;
320 #ifdef GSCD_DEBUG
321 printk("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3],
322 cmd[4]);
323 #endif
324 cmd_out(TYPE_DATA, (char *) &cmd,
325 (char *) &gscd_buf[0], 1);
327 gscd_bn = req->sector / 4;
328 gscd_transfer(req);
329 end_request(req, 1);
332 SET_TIMER(__do_gscd_request, 1);
337 * Open the device special file. Check that a disk is in.
340 static int gscd_open(struct inode *ip, struct file *fp)
342 int st;
344 #ifdef GSCD_DEBUG
345 printk("GSCD: open\n");
346 #endif
348 if (gscdPresent == 0)
349 return -ENXIO; /* no hardware */
351 get_status();
352 st = disk_state & (ST_NO_DISK | ST_DOOR_OPEN);
353 if (st) {
354 printk("GSCD: no disk or door open\n");
355 return -ENXIO;
358 /* if (updateToc() < 0)
359 return -EIO;
362 return 0;
367 * On close, we flush all gscd blocks from the buffer cache.
370 static int gscd_release(struct inode *inode, struct file *file)
373 #ifdef GSCD_DEBUG
374 printk("GSCD: release\n");
375 #endif
377 gscd_bn = -1;
379 return 0;
383 static int get_status(void)
385 int status;
387 cmd_status();
388 status = disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01);
390 if (status == (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) {
391 cc_invalidate();
392 return 1;
393 } else {
394 return 0;
399 static void cc_invalidate(void)
401 drv_num_read = 0xFF;
402 f_dsk_valid = 0xFF;
403 current_drive = 0xFF;
404 f_drv_ok = 0xFF;
406 clear_Audio();
410 static void clear_Audio(void)
413 f_AudioPlay = 0;
414 f_AudioPause = 0;
415 AudioStart_m = 0;
416 AudioStart_f = 0;
417 AudioEnd_m = 0;
418 AudioEnd_f = 0;
423 * waiting ?
426 static int wait_drv_ready(void)
428 int found, read;
430 do {
431 found = inb(GSCDPORT(0));
432 found &= 0x0f;
433 read = inb(GSCDPORT(0));
434 read &= 0x0f;
435 } while (read != found);
437 #ifdef GSCD_DEBUG
438 printk("Wait for: %d\n", read);
439 #endif
441 return read;
444 static void cc_Ident(char *respons)
446 char to_do[] = { CMD_IDENT, 0, 0 };
448 cmd_out(TYPE_INFO, (char *) &to_do, (char *) respons, (int) 0x1E);
452 static void cc_SetSpeed(void)
454 char to_do[] = { CMD_SETSPEED, 0, 0 };
455 char dummy;
457 if (speed > 0) {
458 to_do[1] = speed & 0x0F;
459 cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
463 static void cc_Reset(void)
465 char to_do[] = { CMD_RESET, 0 };
466 char dummy;
468 cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
471 static void cmd_status(void)
473 char to_do[] = { CMD_STATUS, 0 };
474 char dummy;
476 cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
478 #ifdef GSCD_DEBUG
479 printk("GSCD: Status: %d\n", disk_state);
480 #endif
484 static void cmd_out(int cmd_type, char *cmd, char *respo_buf, int respo_count)
486 int result;
489 result = wait_drv_ready();
490 if (result != drv_mode) {
491 unsigned long test_loops = 0xFFFF;
492 int i, dummy;
494 outb(curr_drv_state, GSCDPORT(0));
496 /* LOCLOOP_170 */
497 do {
498 result = wait_drv_ready();
499 test_loops--;
500 } while ((result != drv_mode) && (test_loops > 0));
502 if (result != drv_mode) {
503 disk_state = ST_x08 | ST_x04 | ST_INVALID;
504 return;
507 /* ...and waiting */
508 for (i = 1, dummy = 1; i < 0xFFFF; i++) {
509 dummy *= i;
513 /* LOC_172 */
514 /* check the unit */
515 /* and wake it up */
516 if (cmd_unit_alive() != 0x08) {
517 /* LOC_174 */
518 /* game over for this unit */
519 disk_state = ST_x08 | ST_x04 | ST_INVALID;
520 return;
523 /* LOC_176 */
524 #ifdef GSCD_DEBUG
525 printk("LOC_176 ");
526 #endif
527 if (drv_mode == 0x09) {
528 /* magic... */
529 printk("GSCD: magic ...\n");
530 outb(result, GSCDPORT(2));
533 /* write the command to the drive */
534 cmd_write_cmd(cmd);
536 /* LOC_178 */
537 for (;;) {
538 result = wait_drv_ready();
539 if (result != drv_mode) {
540 /* LOC_179 */
541 if (result == 0x04) { /* Mode 4 */
542 /* LOC_205 */
543 #ifdef GSCD_DEBUG
544 printk("LOC_205 ");
545 #endif
546 disk_state = inb(GSCDPORT(2));
548 do {
549 result = wait_drv_ready();
550 } while (result != drv_mode);
551 return;
553 } else {
554 if (result == 0x06) { /* Mode 6 */
555 /* LOC_181 */
556 #ifdef GSCD_DEBUG
557 printk("LOC_181 ");
558 #endif
560 if (cmd_type == TYPE_DATA) {
561 /* read data */
562 /* LOC_184 */
563 if (drv_mode == 9) {
564 /* read the data to the buffer (word) */
566 /* (*(cmd+1))?(CD_FRAMESIZE/2):(CD_FRAMESIZE_RAW/2) */
567 cmd_read_w
568 (respo_buf,
569 respo_count,
570 CD_FRAMESIZE /
572 return;
573 } else {
574 /* read the data to the buffer (byte) */
576 /* (*(cmd+1))?(CD_FRAMESIZE):(CD_FRAMESIZE_RAW) */
577 cmd_read_b
578 (respo_buf,
579 respo_count,
580 CD_FRAMESIZE);
581 return;
583 } else {
584 /* read the info to the buffer */
585 cmd_info_in(respo_buf,
586 respo_count);
587 return;
590 return;
594 } else {
595 disk_state = ST_x08 | ST_x04 | ST_INVALID;
596 return;
598 } /* for (;;) */
601 #ifdef GSCD_DEBUG
602 printk("\n");
603 #endif
607 static void cmd_write_cmd(char *pstr)
609 int i, j;
611 /* LOC_177 */
612 #ifdef GSCD_DEBUG
613 printk("LOC_177 ");
614 #endif
616 /* calculate the number of parameter */
617 j = *pstr & 0x0F;
619 /* shift it out */
620 for (i = 0; i < j; i++) {
621 outb(*pstr, GSCDPORT(2));
622 pstr++;
627 static int cmd_unit_alive(void)
629 int result;
630 unsigned long max_test_loops;
633 /* LOC_172 */
634 #ifdef GSCD_DEBUG
635 printk("LOC_172 ");
636 #endif
638 outb(curr_drv_state, GSCDPORT(0));
639 max_test_loops = 0xFFFF;
641 do {
642 result = wait_drv_ready();
643 max_test_loops--;
644 } while ((result != 0x08) && (max_test_loops > 0));
646 return result;
650 static void cmd_info_in(char *pb, int count)
652 int result;
653 char read;
656 /* read info */
657 /* LOC_182 */
658 #ifdef GSCD_DEBUG
659 printk("LOC_182 ");
660 #endif
662 do {
663 read = inb(GSCDPORT(2));
664 if (count > 0) {
665 *pb = read;
666 pb++;
667 count--;
670 /* LOC_183 */
671 do {
672 result = wait_drv_ready();
673 } while (result == 0x0E);
674 } while (result == 6);
676 cmd_end();
677 return;
681 static void cmd_read_b(char *pb, int count, int size)
683 int result;
684 int i;
687 /* LOC_188 */
688 /* LOC_189 */
689 #ifdef GSCD_DEBUG
690 printk("LOC_189 ");
691 #endif
693 do {
694 do {
695 result = wait_drv_ready();
696 } while (result != 6 || result == 0x0E);
698 if (result != 6) {
699 cmd_end();
700 return;
702 #ifdef GSCD_DEBUG
703 printk("LOC_191 ");
704 #endif
706 for (i = 0; i < size; i++) {
707 *pb = inb(GSCDPORT(2));
708 pb++;
710 count--;
711 } while (count > 0);
713 cmd_end();
714 return;
718 static void cmd_end(void)
720 int result;
723 /* LOC_204 */
724 #ifdef GSCD_DEBUG
725 printk("LOC_204 ");
726 #endif
728 do {
729 result = wait_drv_ready();
730 if (result == drv_mode) {
731 return;
733 } while (result != 4);
735 /* LOC_205 */
736 #ifdef GSCD_DEBUG
737 printk("LOC_205 ");
738 #endif
740 disk_state = inb(GSCDPORT(2));
742 do {
743 result = wait_drv_ready();
744 } while (result != drv_mode);
745 return;
750 static void cmd_read_w(char *pb, int count, int size)
752 int result;
753 int i;
756 #ifdef GSCD_DEBUG
757 printk("LOC_185 ");
758 #endif
760 do {
761 /* LOC_185 */
762 do {
763 result = wait_drv_ready();
764 } while (result != 6 || result == 0x0E);
766 if (result != 6) {
767 cmd_end();
768 return;
771 for (i = 0; i < size; i++) {
772 /* na, hier muss ich noch mal drueber nachdenken */
773 *pb = inw(GSCDPORT(2));
774 pb++;
776 count--;
777 } while (count > 0);
779 cmd_end();
780 return;
783 static int __init find_drives(void)
785 int *pdrv;
786 int drvnum;
787 int subdrv;
788 int i;
790 speed = 0;
791 pdrv = (int *) &drv_states;
792 curr_drv_state = 0xFE;
793 subdrv = 0;
794 drvnum = 0;
796 for (i = 0; i < 8; i++) {
797 subdrv++;
798 cmd_status();
799 disk_state &= ST_x08 | ST_x04 | ST_INVALID | ST_x01;
800 if (disk_state != (ST_x08 | ST_x04 | ST_INVALID)) {
801 /* LOC_240 */
802 *pdrv = curr_drv_state;
803 init_cd_drive(drvnum);
804 pdrv++;
805 drvnum++;
806 } else {
807 if (subdrv < 2) {
808 continue;
809 } else {
810 subdrv = 0;
814 /* curr_drv_state<<1; <-- das geht irgendwie nicht */
815 /* muss heissen: curr_drv_state <<= 1; (ist ja Wert-Zuweisung) */
816 curr_drv_state *= 2;
817 curr_drv_state |= 1;
818 #ifdef GSCD_DEBUG
819 printk("DriveState: %d\n", curr_drv_state);
820 #endif
823 ndrives = drvnum;
824 return drvnum;
827 static void __init init_cd_drive(int num)
829 char resp[50];
830 int i;
832 printk("GSCD: init unit %d\n", num);
833 cc_Ident((char *) &resp);
835 printk("GSCD: identification: ");
836 for (i = 0; i < 0x1E; i++) {
837 printk("%c", resp[i]);
839 printk("\n");
841 cc_SetSpeed();
845 #ifdef FUTURE_WORK
846 /* return_done */
847 static void update_state(void)
849 unsigned int AX;
852 if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) == 0) {
853 if (disk_state == (ST_x08 | ST_x04 | ST_INVALID)) {
854 AX = ST_INVALID;
857 if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01))
858 == 0) {
859 invalidate();
860 f_drv_ok = 0;
863 AX |= 0x8000;
866 if (disk_state & ST_PLAYING) {
867 AX |= 0x200;
870 AX |= 0x100;
871 /* pkt_esbx = AX; */
873 disk_state = 0;
876 #endif
878 static struct gendisk *gscd_disk;
880 static void __exit gscd_exit(void)
882 CLEAR_TIMER;
884 del_gendisk(gscd_disk);
885 put_disk(gscd_disk);
886 if ((unregister_blkdev(MAJOR_NR, "gscd") == -EINVAL)) {
887 printk("What's that: can't unregister GoldStar-module\n");
888 return;
890 blk_cleanup_queue(gscd_queue);
891 release_region(gscd_port, GSCD_IO_EXTENT);
892 printk(KERN_INFO "GoldStar-module released.\n");
895 /* This is the common initialisation for the GoldStar drive. */
896 /* It is called at boot time AND for module init. */
897 static int __init gscd_init(void)
899 int i;
900 int result;
901 int ret=0;
903 printk(KERN_INFO "GSCD: version %s\n", GSCD_VERSION);
904 printk(KERN_INFO
905 "GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n",
906 gscd_port);
908 if (!request_region(gscd_port, GSCD_IO_EXTENT, "gscd")) {
909 printk(KERN_WARNING "GSCD: Init failed, I/O port (%X) already"
910 " in use.\n", gscd_port);
911 return -EIO;
915 /* check for card */
916 result = wait_drv_ready();
917 if (result == 0x09) {
918 printk(KERN_WARNING "GSCD: DMA kann ich noch nicht!\n");
919 ret = -EIO;
920 goto err_out1;
923 if (result == 0x0b) {
924 drv_mode = result;
925 i = find_drives();
926 if (i == 0) {
927 printk(KERN_WARNING "GSCD: GoldStar CD-ROM Drive is"
928 " not found.\n");
929 ret = -EIO;
930 goto err_out1;
934 if ((result != 0x0b) && (result != 0x09)) {
935 printk(KERN_WARNING "GSCD: GoldStar Interface Adapter does not "
936 "exist or H/W error\n");
937 ret = -EIO;
938 goto err_out1;
941 /* reset all drives */
942 i = 0;
943 while (drv_states[i] != 0) {
944 curr_drv_state = drv_states[i];
945 printk(KERN_INFO "GSCD: Reset unit %d ... ", i);
946 cc_Reset();
947 printk("done\n");
948 i++;
951 gscd_disk = alloc_disk(1);
952 if (!gscd_disk)
953 goto err_out1;
954 gscd_disk->major = MAJOR_NR;
955 gscd_disk->first_minor = 0;
956 gscd_disk->fops = &gscd_fops;
957 sprintf(gscd_disk->disk_name, "gscd");
958 sprintf(gscd_disk->devfs_name, "gscd");
960 if (register_blkdev(MAJOR_NR, "gscd")) {
961 ret = -EIO;
962 goto err_out2;
965 gscd_queue = blk_init_queue(do_gscd_request, &gscd_lock);
966 if (!gscd_queue) {
967 ret = -ENOMEM;
968 goto err_out3;
971 disk_state = 0;
972 gscdPresent = 1;
974 gscd_disk->queue = gscd_queue;
975 add_disk(gscd_disk);
977 printk(KERN_INFO "GSCD: GoldStar CD-ROM Drive found.\n");
978 return 0;
980 err_out3:
981 unregister_blkdev(MAJOR_NR, "gscd");
982 err_out2:
983 put_disk(gscd_disk);
984 err_out1:
985 release_region(gscd_port, GSCD_IO_EXTENT);
986 return ret;
989 static void gscd_hsg2msf(long hsg, struct msf *msf)
991 hsg += CD_MSF_OFFSET;
992 msf->min = hsg / (CD_FRAMES * CD_SECS);
993 hsg %= CD_FRAMES * CD_SECS;
994 msf->sec = hsg / CD_FRAMES;
995 msf->frame = hsg % CD_FRAMES;
997 gscd_bin2bcd(&msf->min); /* convert to BCD */
998 gscd_bin2bcd(&msf->sec);
999 gscd_bin2bcd(&msf->frame);
1003 static void gscd_bin2bcd(unsigned char *p)
1005 int u, t;
1007 u = *p % 10;
1008 t = *p / 10;
1009 *p = u | (t << 4);
1013 #ifdef FUTURE_WORK
1014 static long gscd_msf2hsg(struct msf *mp)
1016 return gscd_bcd2bin(mp->frame)
1017 + gscd_bcd2bin(mp->sec) * CD_FRAMES
1018 + gscd_bcd2bin(mp->min) * CD_FRAMES * CD_SECS - CD_MSF_OFFSET;
1021 static int gscd_bcd2bin(unsigned char bcd)
1023 return (bcd >> 4) * 10 + (bcd & 0xF);
1025 #endif
1027 MODULE_AUTHOR("Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>");
1028 MODULE_LICENSE("GPL");
1029 module_init(gscd_init);
1030 module_exit(gscd_exit);
1031 MODULE_ALIAS_BLOCKDEV_MAJOR(GOLDSTAR_CDROM_MAJOR);