drivers/scsi/qla2xxx/qla_fw.h

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #ifndef __QLA_FW_H
   8 #define __QLA_FW_H
   9
  10 #define RISC_SADDRESS           0x100000
  11 #define MBS_CHECKSUM_ERROR      0x4010
  12
  13 /*
  14  * Firmware Options.
  15  */
  16 #define FO1_ENABLE_PUREX        BIT_10
  17 #define FO1_DISABLE_LED_CTRL    BIT_6
  18 #define FO2_ENABLE_SEL_CLASS2   BIT_5
  19 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14
  20
  21 /*
  22  * Port Database structure definition for ISP 24xx.
  23  */
  24 #define PDO_FORCE_ADISC         BIT_1
  25 #define PDO_FORCE_PLOGI         BIT_0
  26
  27
  28 #define PORT_DATABASE_24XX_SIZE         64
  29 struct port_database_24xx {
  30         uint16_t flags;
  31 #define PDF_TASK_RETRY_ID       BIT_14
  32 #define PDF_FC_TAPE             BIT_7
  33 #define PDF_ACK0_CAPABLE        BIT_6
  34 #define PDF_FCP2_CONF           BIT_5
  35 #define PDF_CLASS_2             BIT_4
  36 #define PDF_HARD_ADDR           BIT_1
  37
  38         uint8_t current_login_state;
  39         uint8_t last_login_state;
  40 #define PDS_PLOGI_PENDING       0x03
  41 #define PDS_PLOGI_COMPLETE      0x04
  42 #define PDS_PRLI_PENDING        0x05
  43 #define PDS_PRLI_COMPLETE       0x06
  44 #define PDS_PORT_UNAVAILABLE    0x07
  45 #define PDS_PRLO_PENDING        0x09
  46 #define PDS_LOGO_PENDING        0x11
  47 #define PDS_PRLI2_PENDING       0x12
  48
  49         uint8_t hard_address[3];
  50         uint8_t reserved_1;
  51
  52         uint8_t port_id[3];
  53         uint8_t sequence_id;
  54
  55         uint16_t port_timer;
  56
  57         uint16_t nport_handle;                  /* N_PORT handle. */
  58
  59         uint16_t receive_data_size;
  60         uint16_t reserved_2;
  61
  62         uint8_t prli_svc_param_word_0[2];       /* Big endian */
  63                                                 /* Bits 15-0 of word 0 */
  64         uint8_t prli_svc_param_word_3[2];       /* Big endian */
  65                                                 /* Bits 15-0 of word 3 */
  66
  67         uint8_t port_name[WWN_SIZE];
  68         uint8_t node_name[WWN_SIZE];
  69
  70         uint8_t reserved_3[24];
  71 };
  72
  73 struct nvram_24xx {
  74         /* NVRAM header. */
  75         uint8_t id[4];
  76         uint16_t nvram_version;
  77         uint16_t reserved_0;
  78
  79         /* Firmware Initialization Control Block. */
  80         uint16_t version;
  81         uint16_t reserved_1;
  82         uint16_t frame_payload_size;
  83         uint16_t execution_throttle;
  84         uint16_t exchange_count;
  85         uint16_t hard_address;
  86
  87         uint8_t port_name[WWN_SIZE];
  88         uint8_t node_name[WWN_SIZE];
  89
  90         uint16_t login_retry_count;
  91         uint16_t link_down_on_nos;
  92         uint16_t interrupt_delay_timer;
  93         uint16_t login_timeout;
  94
  95         uint32_t firmware_options_1;
  96         uint32_t firmware_options_2;
  97         uint32_t firmware_options_3;
  98
  99         /* Offset 56. */
 100
 101         /*
 102          * BIT 0     = Control Enable
 103          * BIT 1-15  =
 104          *
 105          * BIT 0-7   = Reserved
 106          * BIT 8-10  = Output Swing 1G
 107          * BIT 11-13 = Output Emphasis 1G
 108          * BIT 14-15 = Reserved
 109          *
 110          * BIT 0-7   = Reserved
 111          * BIT 8-10  = Output Swing 2G
 112          * BIT 11-13 = Output Emphasis 2G
 113          * BIT 14-15 = Reserved
 114          *
 115          * BIT 0-7   = Reserved
 116          * BIT 8-10  = Output Swing 4G
 117          * BIT 11-13 = Output Emphasis 4G
 118          * BIT 14-15 = Reserved
 119          */
 120         uint16_t seriallink_options[4];
 121
 122         uint16_t reserved_2[16];
 123
 124         /* Offset 96. */
 125         uint16_t reserved_3[16];
 126
 127         /* PCIe table entries. */
 128         uint16_t reserved_4[16];
 129
 130         /* Offset 160. */
 131         uint16_t reserved_5[16];
 132
 133         /* Offset 192. */
 134         uint16_t reserved_6[16];
 135
 136         /* Offset 224. */
 137         uint16_t reserved_7[16];
 138
 139         /*
 140          * BIT 0  = Enable spinup delay
 141          * BIT 1  = Disable BIOS
 142          * BIT 2  = Enable Memory Map BIOS
 143          * BIT 3  = Enable Selectable Boot
 144          * BIT 4  = Disable RISC code load
 145          * BIT 5  =
 146          * BIT 6  =
 147          * BIT 7  =
 148          *
 149          * BIT 8  =
 150          * BIT 9  =
 151          * BIT 10 = Enable lip full login
 152          * BIT 11 = Enable target reset
 153          * BIT 12 =
 154          * BIT 13 =
 155          * BIT 14 =
 156          * BIT 15 = Enable alternate WWN
 157          *
 158          * BIT 16-31 =
 159          */
 160         uint32_t host_p;
 161
 162         uint8_t alternate_port_name[WWN_SIZE];
 163         uint8_t alternate_node_name[WWN_SIZE];
 164
 165         uint8_t boot_port_name[WWN_SIZE];
 166         uint16_t boot_lun_number;
 167         uint16_t reserved_8;
 168
 169         uint8_t alt1_boot_port_name[WWN_SIZE];
 170         uint16_t alt1_boot_lun_number;
 171         uint16_t reserved_9;
 172
 173         uint8_t alt2_boot_port_name[WWN_SIZE];
 174         uint16_t alt2_boot_lun_number;
 175         uint16_t reserved_10;
 176
 177         uint8_t alt3_boot_port_name[WWN_SIZE];
 178         uint16_t alt3_boot_lun_number;
 179         uint16_t reserved_11;
 180
 181         /*
 182          * BIT 0 = Selective Login
 183          * BIT 1 = Alt-Boot Enable
 184          * BIT 2 = Reserved
 185          * BIT 3 = Boot Order List
 186          * BIT 4 = Reserved
 187          * BIT 5 = Selective LUN
 188          * BIT 6 = Reserved
 189          * BIT 7-31 =
 190          */
 191         uint32_t efi_parameters;
 192
 193         uint8_t reset_delay;
 194         uint8_t reserved_12;
 195         uint16_t reserved_13;
 196
 197         uint16_t boot_id_number;
 198         uint16_t reserved_14;
 199
 200         uint16_t max_luns_per_target;
 201         uint16_t reserved_15;
 202
 203         uint16_t port_down_retry_count;
 204         uint16_t link_down_timeout;
 205
 206         /* FCode parameters. */
 207         uint16_t fcode_parameter;
 208
 209         uint16_t reserved_16[3];
 210
 211         /* Offset 352. */
 212         uint8_t prev_drv_ver_major;
 213         uint8_t prev_drv_ver_submajob;
 214         uint8_t prev_drv_ver_minor;
 215         uint8_t prev_drv_ver_subminor;
 216
 217         uint16_t prev_bios_ver_major;
 218         uint16_t prev_bios_ver_minor;
 219
 220         uint16_t prev_efi_ver_major;
 221         uint16_t prev_efi_ver_minor;
 222
 223         uint16_t prev_fw_ver_major;
 224         uint8_t prev_fw_ver_minor;
 225         uint8_t prev_fw_ver_subminor;
 226
 227         uint16_t reserved_17[8];
 228
 229         /* Offset 384. */
 230         uint16_t reserved_18[16];
 231
 232         /* Offset 416. */
 233         uint16_t reserved_19[16];
 234
 235         /* Offset 448. */
 236         uint16_t reserved_20[16];
 237
 238         /* Offset 480. */
 239         uint8_t model_name[16];
 240
 241         uint16_t reserved_21[2];
 242
 243         /* Offset 500. */
 244         /* HW Parameter Block. */
 245         uint16_t pcie_table_sig;
 246         uint16_t pcie_table_offset;
 247
 248         uint16_t subsystem_vendor_id;
 249         uint16_t subsystem_device_id;
 250
 251         uint32_t checksum;
 252 };
 253
 254 /*
 255  * ISP Initialization Control Block.
 256  * Little endian except where noted.
 257  */
 258 #define ICB_VERSION 1
 259 struct init_cb_24xx {
 260         uint16_t version;
 261         uint16_t reserved_1;
 262
 263         uint16_t frame_payload_size;
 264         uint16_t execution_throttle;
 265         uint16_t exchange_count;
 266
 267         uint16_t hard_address;
 268
 269         uint8_t port_name[WWN_SIZE];            /* Big endian. */
 270         uint8_t node_name[WWN_SIZE];            /* Big endian. */
 271
 272         uint16_t response_q_inpointer;
 273         uint16_t request_q_outpointer;
 274
 275         uint16_t login_retry_count;
 276
 277         uint16_t prio_request_q_outpointer;
 278
 279         uint16_t response_q_length;
 280         uint16_t request_q_length;
 281
 282         uint16_t link_down_timeout;             /* Milliseconds. */
 283
 284         uint16_t prio_request_q_length;
 285
 286         uint32_t request_q_address[2];
 287         uint32_t response_q_address[2];
 288         uint32_t prio_request_q_address[2];
 289
 290         uint8_t reserved_2[8];
 291
 292         uint16_t atio_q_inpointer;
 293         uint16_t atio_q_length;
 294         uint32_t atio_q_address[2];
 295
 296         uint16_t interrupt_delay_timer;         /* 100us increments. */
 297         uint16_t login_timeout;
 298
 299         /*
 300          * BIT 0  = Enable Hard Loop Id
 301          * BIT 1  = Enable Fairness
 302          * BIT 2  = Enable Full-Duplex
 303          * BIT 3  = Reserved
 304          * BIT 4  = Enable Target Mode
 305          * BIT 5  = Disable Initiator Mode
 306          * BIT 6  = Reserved
 307          * BIT 7  = Reserved
 308          *
 309          * BIT 8  = Reserved
 310          * BIT 9  = Non Participating LIP
 311          * BIT 10 = Descending Loop ID Search
 312          * BIT 11 = Acquire Loop ID in LIPA
 313          * BIT 12 = Reserved
 314          * BIT 13 = Full Login after LIP
 315          * BIT 14 = Node Name Option
 316          * BIT 15-31 = Reserved
 317          */
 318         uint32_t firmware_options_1;
 319
 320         /*
 321          * BIT 0  = Operation Mode bit 0
 322          * BIT 1  = Operation Mode bit 1
 323          * BIT 2  = Operation Mode bit 2
 324          * BIT 3  = Operation Mode bit 3
 325          * BIT 4  = Connection Options bit 0
 326          * BIT 5  = Connection Options bit 1
 327          * BIT 6  = Connection Options bit 2
 328          * BIT 7  = Enable Non part on LIHA failure
 329          *
 330          * BIT 8  = Enable Class 2
 331          * BIT 9  = Enable ACK0
 332          * BIT 10 = Reserved
 333          * BIT 11 = Enable FC-SP Security
 334          * BIT 12 = FC Tape Enable
 335          * BIT 13-31 = Reserved
 336          */
 337         uint32_t firmware_options_2;
 338
 339         /*
 340          * BIT 0  = Reserved
 341          * BIT 1  = Soft ID only
 342          * BIT 2  = Reserved
 343          * BIT 3  = Reserved
 344          * BIT 4  = FCP RSP Payload bit 0
 345          * BIT 5  = FCP RSP Payload bit 1
 346          * BIT 6  = Enable Receive Out-of-Order data frame handling
 347          * BIT 7  = Disable Automatic PLOGI on Local Loop
 348          *
 349          * BIT 8  = Reserved
 350          * BIT 9  = Enable Out-of-Order FCP_XFER_RDY relative offset handling
 351          * BIT 10 = Reserved
 352          * BIT 11 = Reserved
 353          * BIT 12 = Reserved
 354          * BIT 13 = Data Rate bit 0
 355          * BIT 14 = Data Rate bit 1
 356          * BIT 15 = Data Rate bit 2
 357          * BIT 16-31 = Reserved
 358          */
 359         uint32_t firmware_options_3;
 360
 361         uint8_t  reserved_3[24];
 362 };
 363
 364 /*
 365  * ISP queue - command entry structure definition.
 366  */
 367 #define COMMAND_TYPE_6  0x48            /* Command Type 6 entry */
 368 struct cmd_type_6 {
 369         uint8_t entry_type;             /* Entry type. */
 370         uint8_t entry_count;            /* Entry count. */
 371         uint8_t sys_define;             /* System defined. */
 372         uint8_t entry_status;           /* Entry Status. */
 373
 374         uint32_t handle;                /* System handle. */
 375
 376         uint16_t nport_handle;          /* N_PORT handle. */
 377         uint16_t timeout;               /* Command timeout. */
 378
 379         uint16_t dseg_count;            /* Data segment count. */
 380
 381         uint16_t fcp_rsp_dsd_len;       /* FCP_RSP DSD length. */
 382
 383         struct scsi_lun lun;            /* FCP LUN (BE). */
 384
 385         uint16_t control_flags;         /* Control flags. */
 386 #define CF_DATA_SEG_DESCR_ENABLE        BIT_2
 387 #define CF_READ_DATA                    BIT_1
 388 #define CF_WRITE_DATA                   BIT_0
 389
 390         uint16_t fcp_cmnd_dseg_len;             /* Data segment length. */
 391         uint32_t fcp_cmnd_dseg_address[2];      /* Data segment address. */
 392
 393         uint32_t fcp_rsp_dseg_address[2];       /* Data segment address. */
 394
 395         uint32_t byte_count;            /* Total byte count. */
 396
 397         uint8_t port_id[3];             /* PortID of destination port. */
 398         uint8_t vp_index;
 399
 400         uint32_t fcp_data_dseg_address[2];      /* Data segment address. */
 401         uint16_t fcp_data_dseg_len;             /* Data segment length. */
 402         uint16_t reserved_1;                    /* MUST be set to 0. */
 403 };
 404
 405 #define COMMAND_TYPE_7  0x18            /* Command Type 7 entry */
 406 struct cmd_type_7 {
 407         uint8_t entry_type;             /* Entry type. */
 408         uint8_t entry_count;            /* Entry count. */
 409         uint8_t sys_define;             /* System defined. */
 410         uint8_t entry_status;           /* Entry Status. */
 411
 412         uint32_t handle;                /* System handle. */
 413
 414         uint16_t nport_handle;          /* N_PORT handle. */
 415         uint16_t timeout;               /* Command timeout. */
 416 #define FW_MAX_TIMEOUT          0x1999
 417
 418         uint16_t dseg_count;            /* Data segment count. */
 419         uint16_t reserved_1;
 420
 421         struct scsi_lun lun;            /* FCP LUN (BE). */
 422
 423         uint16_t task_mgmt_flags;       /* Task management flags. */
 424 #define TMF_CLEAR_ACA           BIT_14
 425 #define TMF_TARGET_RESET        BIT_13
 426 #define TMF_LUN_RESET           BIT_12
 427 #define TMF_CLEAR_TASK_SET      BIT_10
 428 #define TMF_ABORT_TASK_SET      BIT_9
 429 #define TMF_READ_DATA           BIT_1
 430 #define TMF_WRITE_DATA          BIT_0
 431
 432         uint8_t task;
 433 #define TSK_SIMPLE              0
 434 #define TSK_HEAD_OF_QUEUE       1
 435 #define TSK_ORDERED             2
 436 #define TSK_ACA                 4
 437 #define TSK_UNTAGGED            5
 438
 439         uint8_t crn;
 440
 441         uint8_t fcp_cdb[MAX_CMDSZ];     /* SCSI command words. */
 442         uint32_t byte_count;            /* Total byte count. */
 443
 444         uint8_t port_id[3];             /* PortID of destination port. */
 445         uint8_t vp_index;
 446
 447         uint32_t dseg_0_address[2];     /* Data segment 0 address. */
 448         uint32_t dseg_0_len;            /* Data segment 0 length. */
 449 };
 450
 451 /*
 452  * ISP queue - status entry structure definition.
 453  */
 454 #define STATUS_TYPE     0x03            /* Status entry. */
 455 struct sts_entry_24xx {
 456         uint8_t entry_type;             /* Entry type. */
 457         uint8_t entry_count;            /* Entry count. */
 458         uint8_t sys_define;             /* System defined. */
 459         uint8_t entry_status;           /* Entry Status. */
 460
 461         uint32_t handle;                /* System handle. */
 462
 463         uint16_t comp_status;           /* Completion status. */
 464         uint16_t ox_id;                 /* OX_ID used by the firmware. */
 465
 466         uint32_t residual_len;          /* Residual transfer length. */
 467
 468         uint16_t reserved_1;
 469         uint16_t state_flags;           /* State flags. */
 470 #define SF_TRANSFERRED_DATA     BIT_11
 471 #define SF_FCP_RSP_DMA          BIT_0
 472
 473         uint16_t reserved_2;
 474         uint16_t scsi_status;           /* SCSI status. */
 475 #define SS_CONFIRMATION_REQ             BIT_12
 476
 477         uint32_t rsp_residual_count;    /* FCP RSP residual count. */
 478
 479         uint32_t sense_len;             /* FCP SENSE length. */
 480         uint32_t rsp_data_len;          /* FCP response data length. */
 481
 482         uint8_t data[28];               /* FCP response/sense information. */
 483 };
 484
 485 /*
 486  * Status entry completion status
 487  */
 488 #define CS_DATA_REASSEMBLY_ERROR 0x11   /* Data Reassembly Error.. */
 489 #define CS_ABTS_BY_TARGET       0x13    /* Target send ABTS to abort IOCB. */
 490 #define CS_FW_RESOURCE          0x2C    /* Firmware Resource Unavailable. */
 491 #define CS_TASK_MGMT_OVERRUN    0x30    /* Task management overrun (8+). */
 492 #define CS_ABORT_BY_TARGET      0x47    /* Abort By Target. */
 493
 494 /*
 495  * ISP queue - marker entry structure definition.
 496  */
 497 #define MARKER_TYPE     0x04            /* Marker entry. */
 498 struct mrk_entry_24xx {
 499         uint8_t entry_type;             /* Entry type. */
 500         uint8_t entry_count;            /* Entry count. */
 501         uint8_t handle_count;           /* Handle count. */
 502         uint8_t entry_status;           /* Entry Status. */
 503
 504         uint32_t handle;                /* System handle. */
 505
 506         uint16_t nport_handle;          /* N_PORT handle. */
 507
 508         uint8_t modifier;               /* Modifier (7-0). */
 509 #define MK_SYNC_ID_LUN  0               /* Synchronize ID/LUN */
 510 #define MK_SYNC_ID      1               /* Synchronize ID */
 511 #define MK_SYNC_ALL     2               /* Synchronize all ID/LUN */
 512         uint8_t reserved_1;
 513
 514         uint8_t reserved_2;
 515         uint8_t vp_index;
 516
 517         uint16_t reserved_3;
 518
 519         uint8_t lun[8];                 /* FCP LUN (BE). */
 520         uint8_t reserved_4[40];
 521 };
 522
 523 /*
 524  * ISP queue - CT Pass-Through entry structure definition.
 525  */
 526 #define CT_IOCB_TYPE            0x29    /* CT Pass-Through IOCB entry */
 527 struct ct_entry_24xx {
 528         uint8_t entry_type;             /* Entry type. */
 529         uint8_t entry_count;            /* Entry count. */
 530         uint8_t sys_define;             /* System Defined. */
 531         uint8_t entry_status;           /* Entry Status. */
 532
 533         uint32_t handle;                /* System handle. */
 534
 535         uint16_t comp_status;           /* Completion status. */
 536
 537         uint16_t nport_handle;          /* N_PORT handle. */
 538
 539         uint16_t cmd_dsd_count;
 540
 541         uint8_t vp_index;
 542         uint8_t reserved_1;
 543
 544         uint16_t timeout;               /* Command timeout. */
 545         uint16_t reserved_2;
 546
 547         uint16_t rsp_dsd_count;
 548
 549         uint8_t reserved_3[10];
 550
 551         uint32_t rsp_byte_count;
 552         uint32_t cmd_byte_count;
 553
 554         uint32_t dseg_0_address[2];     /* Data segment 0 address. */
 555         uint32_t dseg_0_len;            /* Data segment 0 length. */
 556         uint32_t dseg_1_address[2];     /* Data segment 1 address. */
 557         uint32_t dseg_1_len;            /* Data segment 1 length. */
 558 };
 559
 560 /*
 561  * ISP queue - ELS Pass-Through entry structure definition.
 562  */
 563 #define ELS_IOCB_TYPE           0x53    /* ELS Pass-Through IOCB entry */
 564 struct els_entry_24xx {
 565         uint8_t entry_type;             /* Entry type. */
 566         uint8_t entry_count;            /* Entry count. */
 567         uint8_t sys_define;             /* System Defined. */
 568         uint8_t entry_status;           /* Entry Status. */
 569
 570         uint32_t handle;                /* System handle. */
 571
 572         uint16_t reserved_1;
 573
 574         uint16_t nport_handle;          /* N_PORT handle. */
 575
 576         uint16_t tx_dsd_count;
 577
 578         uint8_t vp_index;
 579         uint8_t sof_type;
 580 #define EST_SOFI3               (1 << 4)
 581 #define EST_SOFI2               (3 << 4)
 582
 583         uint32_t rx_xchg_address[2];    /* Receive exchange address. */
 584         uint16_t rx_dsd_count;
 585
 586         uint8_t opcode;
 587         uint8_t reserved_2;
 588
 589         uint8_t port_id[3];
 590         uint8_t reserved_3;
 591
 592         uint16_t reserved_4;
 593
 594         uint16_t control_flags;         /* Control flags. */
 595 #define ECF_PAYLOAD_DESCR_MASK  (BIT_15|BIT_14|BIT_13)
 596 #define EPD_ELS_COMMAND         (0 << 13)
 597 #define EPD_ELS_ACC             (1 << 13)
 598 #define EPD_ELS_RJT             (2 << 13)
 599 #define EPD_RX_XCHG             (3 << 13)
 600 #define ECF_CLR_PASSTHRU_PEND   BIT_12
 601 #define ECF_INCL_FRAME_HDR      BIT_11
 602
 603         uint32_t rx_byte_count;
 604         uint32_t tx_byte_count;
 605
 606         uint32_t tx_address[2];         /* Data segment 0 address. */
 607         uint32_t tx_len;                /* Data segment 0 length. */
 608         uint32_t rx_address[2];         /* Data segment 1 address. */
 609         uint32_t rx_len;                /* Data segment 1 length. */
 610 };
 611
 612 /*
 613  * ISP queue - Mailbox Command entry structure definition.
 614  */
 615 #define MBX_IOCB_TYPE   0x39
 616 struct mbx_entry_24xx {
 617         uint8_t entry_type;             /* Entry type. */
 618         uint8_t entry_count;            /* Entry count. */
 619         uint8_t handle_count;           /* Handle count. */
 620         uint8_t entry_status;           /* Entry Status. */
 621
 622         uint32_t handle;                /* System handle. */
 623
 624         uint16_t mbx[28];
 625 };
 626
 627
 628 #define LOGINOUT_PORT_IOCB_TYPE 0x52    /* Login/Logout Port entry. */
 629 struct logio_entry_24xx {
 630         uint8_t entry_type;             /* Entry type. */
 631         uint8_t entry_count;            /* Entry count. */
 632         uint8_t sys_define;             /* System defined. */
 633         uint8_t entry_status;           /* Entry Status. */
 634
 635         uint32_t handle;                /* System handle. */
 636
 637         uint16_t comp_status;           /* Completion status. */
 638 #define CS_LOGIO_ERROR          0x31    /* Login/Logout IOCB error. */
 639
 640         uint16_t nport_handle;          /* N_PORT handle. */
 641
 642         uint16_t control_flags;         /* Control flags. */
 643                                         /* Modifiers. */
 644 #define LCF_FCP2_OVERRIDE       BIT_9   /* Set/Reset word 3 of PRLI. */
 645 #define LCF_CLASS_2             BIT_8   /* Enable class 2 during PLOGI. */
 646 #define LCF_FREE_NPORT          BIT_7   /* Release NPORT handle after LOGO. */
 647 #define LCF_EXPL_LOGO           BIT_6   /* Perform an explicit LOGO. */
 648 #define LCF_SKIP_PRLI           BIT_5   /* Skip PRLI after PLOGI. */
 649 #define LCF_IMPL_LOGO_ALL       BIT_5   /* Implicit LOGO to all ports. */
 650 #define LCF_COND_PLOGI          BIT_4   /* PLOGI only if not logged-in. */
 651 #define LCF_IMPL_LOGO           BIT_4   /* Perform an implicit LOGO. */
 652 #define LCF_IMPL_PRLO           BIT_4   /* Perform an implicit PRLO. */
 653                                         /* Commands. */
 654 #define LCF_COMMAND_PLOGI       0x00    /* PLOGI. */
 655 #define LCF_COMMAND_PRLI        0x01    /* PRLI. */
 656 #define LCF_COMMAND_PDISC       0x02    /* PDISC. */
 657 #define LCF_COMMAND_ADISC       0x03    /* ADISC. */
 658 #define LCF_COMMAND_LOGO        0x08    /* LOGO. */
 659 #define LCF_COMMAND_PRLO        0x09    /* PRLO. */
 660 #define LCF_COMMAND_TPRLO       0x0A    /* TPRLO. */
 661
 662         uint8_t vp_index;
 663         uint8_t reserved_1;
 664
 665         uint8_t port_id[3];             /* PortID of destination port. */
 666
 667         uint8_t rsp_size;               /* Response size in 32bit words. */
 668
 669         uint32_t io_parameter[11];      /* General I/O parameters. */
 670 #define LSC_SCODE_NOLINK        0x01
 671 #define LSC_SCODE_NOIOCB        0x02
 672 #define LSC_SCODE_NOXCB         0x03
 673 #define LSC_SCODE_CMD_FAILED    0x04
 674 #define LSC_SCODE_NOFABRIC      0x05
 675 #define LSC_SCODE_FW_NOT_READY  0x07
 676 #define LSC_SCODE_NOT_LOGGED_IN 0x09
 677 #define LSC_SCODE_NOPCB         0x0A
 678
 679 #define LSC_SCODE_ELS_REJECT    0x18
 680 #define LSC_SCODE_CMD_PARAM_ERR 0x19
 681 #define LSC_SCODE_PORTID_USED   0x1A
 682 #define LSC_SCODE_NPORT_USED    0x1B
 683 #define LSC_SCODE_NONPORT       0x1C
 684 #define LSC_SCODE_LOGGED_IN     0x1D
 685 #define LSC_SCODE_NOFLOGI_ACC   0x1F
 686 };
 687
 688 #define TSK_MGMT_IOCB_TYPE      0x14
 689 struct tsk_mgmt_entry {
 690         uint8_t entry_type;             /* Entry type. */
 691         uint8_t entry_count;            /* Entry count. */
 692         uint8_t handle_count;           /* Handle count. */
 693         uint8_t entry_status;           /* Entry Status. */
 694
 695         uint32_t handle;                /* System handle. */
 696
 697         uint16_t nport_handle;          /* N_PORT handle. */
 698
 699         uint16_t reserved_1;
 700
 701         uint16_t delay;                 /* Activity delay in seconds. */
 702
 703         uint16_t timeout;               /* Command timeout. */
 704
 705         uint8_t lun[8];                 /* FCP LUN (BE). */
 706
 707         uint32_t control_flags;         /* Control Flags. */
 708 #define TCF_NOTMCMD_TO_TARGET   BIT_31
 709 #define TCF_LUN_RESET           BIT_4
 710 #define TCF_ABORT_TASK_SET      BIT_3
 711 #define TCF_CLEAR_TASK_SET      BIT_2
 712 #define TCF_TARGET_RESET        BIT_1
 713 #define TCF_CLEAR_ACA           BIT_0
 714
 715         uint8_t reserved_2[20];
 716
 717         uint8_t port_id[3];             /* PortID of destination port. */
 718         uint8_t vp_index;
 719
 720         uint8_t reserved_3[12];
 721 };
 722
 723 #define ABORT_IOCB_TYPE 0x33
 724 struct abort_entry_24xx {
 725         uint8_t entry_type;             /* Entry type. */
 726         uint8_t entry_count;            /* Entry count. */
 727         uint8_t handle_count;           /* Handle count. */
 728         uint8_t entry_status;           /* Entry Status. */
 729
 730         uint32_t handle;                /* System handle. */
 731
 732         uint16_t nport_handle;          /* N_PORT handle. */
 733                                         /* or Completion status. */
 734
 735         uint16_t options;               /* Options. */
 736 #define AOF_NO_ABTS             BIT_0   /* Do not send any ABTS. */
 737
 738         uint32_t handle_to_abort;       /* System handle to abort. */
 739
 740         uint8_t reserved_1[32];
 741
 742         uint8_t port_id[3];             /* PortID of destination port. */
 743         uint8_t vp_index;
 744
 745         uint8_t reserved_2[12];
 746 };
 747
 748 /*
 749  * ISP I/O Register Set structure definitions.
 750  */
 751 struct device_reg_24xx {
 752         uint32_t flash_addr;            /* Flash/NVRAM BIOS address. */
 753 #define FARX_DATA_FLAG  BIT_31
 754 #define FARX_ACCESS_FLASH_CONF  0x7FFD0000
 755 #define FARX_ACCESS_FLASH_DATA  0x7FF00000
 756 #define FARX_ACCESS_NVRAM_CONF  0x7FFF0000
 757 #define FARX_ACCESS_NVRAM_DATA  0x7FFE0000
 758
 759 #define FA_NVRAM_FUNC0_ADDR     0x80
 760 #define FA_NVRAM_FUNC1_ADDR     0x180
 761
 762 #define FA_NVRAM_VPD_SIZE       0x200
 763 #define FA_NVRAM_VPD0_ADDR      0x00
 764 #define FA_NVRAM_VPD1_ADDR      0x100
 765                                         /*
 766                                          * RISC code begins at offset 512KB
 767                                          * within flash. Consisting of two
 768                                          * contiguous RISC code segments.
 769                                          */
 770 #define FA_RISC_CODE_ADDR       0x20000
 771 #define FA_RISC_CODE_SEGMENTS   2
 772
 773         uint32_t flash_data;            /* Flash/NVRAM BIOS data. */
 774
 775         uint32_t ctrl_status;           /* Control/Status. */
 776 #define CSRX_FLASH_ACCESS_ERROR BIT_18  /* Flash/NVRAM Access Error. */
 777 #define CSRX_DMA_ACTIVE         BIT_17  /* DMA Active status. */
 778 #define CSRX_DMA_SHUTDOWN       BIT_16  /* DMA Shutdown control status. */
 779 #define CSRX_FUNCTION           BIT_15  /* Function number. */
 780                                         /* PCI-X Bus Mode. */
 781 #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8)
 782 #define PBM_PCI_33MHZ           (0 << 8)
 783 #define PBM_PCIX_M1_66MHZ       (1 << 8)
 784 #define PBM_PCIX_M1_100MHZ      (2 << 8)
 785 #define PBM_PCIX_M1_133MHZ      (3 << 8)
 786 #define PBM_PCIX_M2_66MHZ       (5 << 8)
 787 #define PBM_PCIX_M2_100MHZ      (6 << 8)
 788 #define PBM_PCIX_M2_133MHZ      (7 << 8)
 789 #define PBM_PCI_66MHZ           (8 << 8)
 790                                         /* Max Write Burst byte count. */
 791 #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4)
 792 #define MWB_512_BYTES           (0 << 4)
 793 #define MWB_1024_BYTES          (1 << 4)
 794 #define MWB_2048_BYTES          (2 << 4)
 795 #define MWB_4096_BYTES          (3 << 4)
 796
 797 #define CSRX_64BIT_SLOT         BIT_2   /* PCI 64-Bit Bus Slot. */
 798 #define CSRX_FLASH_ENABLE       BIT_1   /* Flash BIOS Read/Write enable. */
 799 #define CSRX_ISP_SOFT_RESET     BIT_0   /* ISP soft reset. */
 800
 801         uint32_t ictrl;                 /* Interrupt control. */
 802 #define ICRX_EN_RISC_INT        BIT_3   /* Enable RISC interrupts on PCI. */
 803
 804         uint32_t istatus;               /* Interrupt status. */
 805 #define ISRX_RISC_INT           BIT_3   /* RISC interrupt. */
 806
 807         uint32_t unused_1[2];           /* Gap. */
 808
 809                                         /* Request Queue. */
 810         uint32_t req_q_in;              /*  In-Pointer. */
 811         uint32_t req_q_out;             /*  Out-Pointer. */
 812                                         /* Response Queue. */
 813         uint32_t rsp_q_in;              /*  In-Pointer. */
 814         uint32_t rsp_q_out;             /*  Out-Pointer. */
 815                                         /* Priority Request Queue. */
 816         uint32_t preq_q_in;             /*  In-Pointer. */
 817         uint32_t preq_q_out;            /*  Out-Pointer. */
 818
 819         uint32_t unused_2[2];           /* Gap. */
 820
 821                                         /* ATIO Queue. */
 822         uint32_t atio_q_in;             /*  In-Pointer. */
 823         uint32_t atio_q_out;            /*  Out-Pointer. */
 824
 825         uint32_t host_status;
 826 #define HSRX_RISC_INT           BIT_15  /* RISC to Host interrupt. */
 827 #define HSRX_RISC_PAUSED        BIT_8   /* RISC Paused. */
 828
 829         uint32_t hccr;                  /* Host command & control register. */
 830                                         /* HCCR statuses. */
 831 #define HCCRX_HOST_INT          BIT_6   /* Host to RISC interrupt bit. */
 832 #define HCCRX_RISC_RESET        BIT_5   /* RISC Reset mode bit. */
 833 #define HCCRX_RISC_PAUSE        BIT_4   /* RISC Pause mode bit. */
 834                                         /* HCCR commands. */
 835                                         /* NOOP. */
 836 #define HCCRX_NOOP              0x00000000
 837                                         /* Set RISC Reset. */
 838 #define HCCRX_SET_RISC_RESET    0x10000000
 839                                         /* Clear RISC Reset. */
 840 #define HCCRX_CLR_RISC_RESET    0x20000000
 841                                         /* Set RISC Pause. */
 842 #define HCCRX_SET_RISC_PAUSE    0x30000000
 843                                         /* Releases RISC Pause. */
 844 #define HCCRX_REL_RISC_PAUSE    0x40000000
 845                                         /* Set HOST to RISC interrupt. */
 846 #define HCCRX_SET_HOST_INT      0x50000000
 847                                         /* Clear HOST to RISC interrupt. */
 848 #define HCCRX_CLR_HOST_INT      0x60000000
 849                                         /* Clear RISC to PCI interrupt. */
 850 #define HCCRX_CLR_RISC_INT      0xA0000000
 851
 852         uint32_t gpiod;                 /* GPIO Data register. */
 853                                         /* LED update mask. */
 854 #define GPDX_LED_UPDATE_MASK    (BIT_20|BIT_19|BIT_18)
 855                                         /* Data update mask. */
 856 #define GPDX_DATA_UPDATE_MASK   (BIT_17|BIT_16)
 857                                         /* LED control mask. */
 858 #define GPDX_LED_COLOR_MASK     (BIT_4|BIT_3|BIT_2)
 859                                         /* LED bit values. Color names as
 860                                          * referenced in fw spec.
 861                                          */
 862 #define GPDX_LED_YELLOW_ON      BIT_2
 863 #define GPDX_LED_GREEN_ON       BIT_3
 864 #define GPDX_LED_AMBER_ON       BIT_4
 865                                         /* Data in/out. */
 866 #define GPDX_DATA_INOUT         (BIT_1|BIT_0)
 867
 868         uint32_t gpioe;                 /* GPIO Enable register. */
 869                                         /* Enable update mask. */
 870 #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16)
 871                                         /* Enable. */
 872 #define GPEX_ENABLE             (BIT_1|BIT_0)
 873
 874         uint32_t iobase_addr;           /* I/O Bus Base Address register. */
 875
 876         uint32_t unused_3[10];          /* Gap. */
 877
 878         uint16_t mailbox0;
 879         uint16_t mailbox1;
 880         uint16_t mailbox2;
 881         uint16_t mailbox3;
 882         uint16_t mailbox4;
 883         uint16_t mailbox5;
 884         uint16_t mailbox6;
 885         uint16_t mailbox7;
 886         uint16_t mailbox8;
 887         uint16_t mailbox9;
 888         uint16_t mailbox10;
 889         uint16_t mailbox11;
 890         uint16_t mailbox12;
 891         uint16_t mailbox13;
 892         uint16_t mailbox14;
 893         uint16_t mailbox15;
 894         uint16_t mailbox16;
 895         uint16_t mailbox17;
 896         uint16_t mailbox18;
 897         uint16_t mailbox19;
 898         uint16_t mailbox20;
 899         uint16_t mailbox21;
 900         uint16_t mailbox22;
 901         uint16_t mailbox23;
 902         uint16_t mailbox24;
 903         uint16_t mailbox25;
 904         uint16_t mailbox26;
 905         uint16_t mailbox27;
 906         uint16_t mailbox28;
 907         uint16_t mailbox29;
 908         uint16_t mailbox30;
 909         uint16_t mailbox31;
 910 };
 911
 912 /* MID Support ***************************************************************/
 913
 914 #define MAX_MID_VPS     125
 915
 916 struct mid_conf_entry_24xx {
 917         uint16_t reserved_1;
 918
 919         /*
 920          * BIT 0  = Enable Hard Loop Id
 921          * BIT 1  = Acquire Loop ID in LIPA
 922          * BIT 2  = ID not Acquired
 923          * BIT 3  = Enable VP
 924          * BIT 4  = Enable Initiator Mode
 925          * BIT 5  = Disable Target Mode
 926          * BIT 6-7 = Reserved
 927          */
 928         uint8_t options;
 929
 930         uint8_t hard_address;
 931
 932         uint8_t port_name[WWN_SIZE];
 933         uint8_t node_name[WWN_SIZE];
 934 };
 935
 936 struct mid_init_cb_24xx {
 937         struct init_cb_24xx init_cb;
 938
 939         uint16_t count;
 940         uint16_t options;
 941
 942         struct mid_conf_entry_24xx entries[MAX_MID_VPS];
 943 };
 944
 945
 946 struct mid_db_entry_24xx {
 947         uint16_t status;
 948 #define MDBS_NON_PARTIC         BIT_3
 949 #define MDBS_ID_ACQUIRED        BIT_1
 950 #define MDBS_ENABLED            BIT_0
 951
 952         uint8_t options;
 953         uint8_t hard_address;
 954
 955         uint8_t port_name[WWN_SIZE];
 956         uint8_t node_name[WWN_SIZE];
 957
 958         uint8_t port_id[3];
 959         uint8_t reserved_1;
 960 };
 961
 962 struct mid_db_24xx {
 963         struct mid_db_entry_24xx entries[MAX_MID_VPS];
 964 };
 965
 966 #define VP_CTRL_IOCB_TYPE       0x30    /* Vitual Port Control entry. */
 967 struct vp_ctrl_entry_24xx {
 968         uint8_t entry_type;             /* Entry type. */
 969         uint8_t entry_count;            /* Entry count. */
 970         uint8_t sys_define;             /* System defined. */
 971         uint8_t entry_status;           /* Entry Status. */
 972
 973         uint32_t handle;                /* System handle. */
 974
 975         uint16_t vp_idx_failed;
 976
 977         uint16_t comp_status;           /* Completion status. */
 978 #define CS_VCE_ACQ_ID_ERROR     0x02    /* Error while acquireing ID. */
 979 #define CS_VCE_BUSY             0x05    /* Firmware not ready to accept cmd. */
 980
 981         uint16_t command;
 982 #define VCE_COMMAND_ENABLE_VPS  0x00    /* Enable VPs. */
 983 #define VCE_COMMAND_DISABLE_VPS 0x08    /* Disable VPs. */
 984 #define VCE_COMMAND_DISABLE_VPS_REINIT  0x09 /* Disable VPs and reinit link. */
 985 #define VCE_COMMAND_DISABLE_VPS_LOGO    0x0a /* Disable VPs and LOGO ports. */
 986
 987         uint16_t vp_count;
 988
 989         uint8_t vp_idx_map[16];
 990
 991         uint8_t reserved_4[32];
 992 };
 993
 994 #define VP_CONFIG_IOCB_TYPE     0x31    /* Vitual Port Config entry. */
 995 struct vp_config_entry_24xx {
 996         uint8_t entry_type;             /* Entry type. */
 997         uint8_t entry_count;            /* Entry count. */
 998         uint8_t sys_define;             /* System defined. */
 999         uint8_t entry_status;           /* Entry Status. */
1000
1001         uint32_t handle;                /* System handle. */
1002
1003         uint16_t reserved_1;
1004
1005         uint16_t comp_status;           /* Completion status. */
1006 #define CS_VCT_STS_ERROR        0x01    /* Specified VPs were not disabled. */
1007 #define CS_VCT_CNT_ERROR        0x02    /* Invalid VP count. */
1008 #define CS_VCT_ERROR            0x03    /* Unknown error. */
1009 #define CS_VCT_IDX_ERROR        0x02    /* Invalid VP index. */
1010 #define CS_VCT_BUSY             0x05    /* Firmware not ready to accept cmd. */
1011
1012         uint8_t command;
1013 #define VCT_COMMAND_MOD_VPS     0x00    /* Enable VPs. */
1014 #define VCT_COMMAND_MOD_ENABLE_VPS 0x08 /* Disable VPs. */
1015
1016         uint8_t vp_count;
1017
1018         uint8_t vp_idx1;
1019         uint8_t vp_idx2;
1020
1021         uint8_t options_idx1;
1022         uint8_t hard_address_idx1;
1023         uint16_t reserved_2;
1024         uint8_t port_name_idx1[WWN_SIZE];
1025         uint8_t node_name_idx1[WWN_SIZE];
1026
1027         uint8_t options_idx2;
1028         uint8_t hard_address_idx2;
1029         uint16_t reserved_3;
1030         uint8_t port_name_idx2[WWN_SIZE];
1031         uint8_t node_name_idx2[WWN_SIZE];
1032
1033         uint8_t reserved_4[8];
1034 };
1035
1036 #define VP_RPT_ID_IOCB_TYPE     0x32    /* Report ID Acquisition entry. */
1037 struct vp_rpt_id_entry_24xx {
1038         uint8_t entry_type;             /* Entry type. */
1039         uint8_t entry_count;            /* Entry count. */
1040         uint8_t sys_define;             /* System defined. */
1041         uint8_t entry_status;           /* Entry Status. */
1042
1043         uint32_t handle;                /* System handle. */
1044
1045         uint16_t vp_count;              /* Format 0 -- | VP setup | VP acq |. */
1046                                         /* Format 1 -- | VP count |. */
1047         uint16_t vp_idx;                /* Format 0 -- Reserved. */
1048                                         /* Format 1 -- VP status and index. */
1049
1050         uint8_t port_id[3];
1051         uint8_t format;
1052
1053         uint8_t vp_idx_map[16];
1054
1055         uint8_t reserved_4[32];
1056 };
1057
1058 /* END MID Support ***********************************************************/
1059 #endif