?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[IPV4]: Correct rp_filter help text.
[linux-2.6/verdex.git] / arch / arm / mach-sa1100 / h3600.c
blobb72fee0f2538ee6865a69389b7cb8eb253040c8b
1 /*
2 * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
3 *
4 * Copyright 2000,1 Compaq Computer Corporation.
5 *
6 * Use consistent with the GNU GPL is permitted,
7 * provided that this copyright notice is
8 * preserved in its entirety in all copies and derived works.
9 *
10 * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
11 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
12 * FITNESS FOR ANY PARTICULAR PURPOSE.
13 *
14 * Author: Jamey Hicks.
15 *
16 * History:
17 *
18 * 2001-10-?? Andrew Christian Added support for iPAQ H3800
19 * and abstracted EGPIO interface.
20 *
21 */
22 #include <linux/module.h>
23 #include <linux/init.h>
24 #include <linux/kernel.h>
25 #include <linux/tty.h>
26 #include <linux/pm.h>
27 #include <linux/device.h>
28 #include <linux/mtd/mtd.h>
29 #include <linux/mtd/partitions.h>
30 #include <linux/serial_core.h>
31
32 #include <asm/irq.h>
33 #include <asm/hardware.h>
34 #include <asm/mach-types.h>
35 #include <asm/setup.h>
36
37 #include <asm/mach/irq.h>
38 #include <asm/mach/arch.h>
39 #include <asm/mach/flash.h>
40 #include <asm/mach/irda.h>
41 #include <asm/mach/map.h>
42 #include <asm/mach/serial_sa1100.h>
43
44 #include <asm/arch/h3600.h>
45
46 #if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
47 #include <asm/arch/h3600_gpio.h>
48 #endif
49
50 #ifdef CONFIG_SA1100_H3800
51 #include <asm/arch/h3600_asic.h>
52 #endif
53
54 #include "generic.h"
55
56 struct ipaq_model_ops ipaq_model_ops;
57 EXPORT_SYMBOL(ipaq_model_ops);
58
59 static struct mtd_partition h3xxx_partitions[] = {
60 {
61 .name = "H3XXX boot firmware",
62 .size = 0x00040000,
63 .offset = 0,
64 .mask_flags = MTD_WRITEABLE, /* force read-only */
65 }, {
66 #ifdef CONFIG_MTD_2PARTS_IPAQ
67 .name = "H3XXX root jffs2",
68 .size = MTDPART_SIZ_FULL,
69 .offset = 0x00040000,
70 #else
71 .name = "H3XXX kernel",
72 .size = 0x00080000,
73 .offset = 0x00040000,
74 }, {
75 .name = "H3XXX params",
76 .size = 0x00040000,
77 .offset = 0x000C0000,
78 }, {
79 #ifdef CONFIG_JFFS2_FS
80 .name = "H3XXX root jffs2",
81 .size = MTDPART_SIZ_FULL,
82 .offset = 0x00100000,
83 #else
84 .name = "H3XXX initrd",
85 .size = 0x00100000,
86 .offset = 0x00100000,
87 }, {
88 .name = "H3XXX root cramfs",
89 .size = 0x00300000,
90 .offset = 0x00200000,
91 }, {
92 .name = "H3XXX usr cramfs",
93 .size = 0x00800000,
94 .offset = 0x00500000,
95 }, {
96 .name = "H3XXX usr local",
97 .size = MTDPART_SIZ_FULL,
98 .offset = 0x00d00000,
99 #endif
100 #endif
101 }
102 };
103
104 static void h3xxx_set_vpp(int vpp)
105 {
106 assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
107 }
108
109 static struct flash_platform_data h3xxx_flash_data = {
110 .map_name = "cfi_probe",
111 .set_vpp = h3xxx_set_vpp,
112 .parts = h3xxx_partitions,
113 .nr_parts = ARRAY_SIZE(h3xxx_partitions),
114 };
115
116 static struct resource h3xxx_flash_resource = {
117 .start = SA1100_CS0_PHYS,
118 .end = SA1100_CS0_PHYS + SZ_32M - 1,
119 .flags = IORESOURCE_MEM,
120 };
121
122 /*
123 * This turns the IRDA power on or off on the Compaq H3600
124 */
125 static int h3600_irda_set_power(struct device *dev, unsigned int state)
126 {
127 assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
128
129 return 0;
130 }
131
132 static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
133 {
134 if (speed < 4000000) {
135 clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
136 } else {
137 set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
138 }
139 }
140
141 static struct irda_platform_data h3600_irda_data = {
142 .set_power = h3600_irda_set_power,
143 .set_speed = h3600_irda_set_speed,
144 };
145
146 static void h3xxx_mach_init(void)
147 {
148 sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
149 sa11x0_set_irda_data(&h3600_irda_data);
150 }
151
152 /*
153 * low-level UART features
154 */
155
156 static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
157 {
158 if (port->mapbase == _Ser3UTCR0) {
159 if (mctrl & TIOCM_RTS)
160 GPCR = GPIO_H3600_COM_RTS;
161 else
162 GPSR = GPIO_H3600_COM_RTS;
163 }
164 }
165
166 static u_int h3600_uart_get_mctrl(struct uart_port *port)
167 {
168 u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
169
170 if (port->mapbase == _Ser3UTCR0) {
171 int gplr = GPLR;
172 /* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
173 if (gplr & GPIO_H3600_COM_DCD)
174 ret &= ~TIOCM_CD;
175 if (gplr & GPIO_H3600_COM_CTS)
176 ret &= ~TIOCM_CTS;
177 }
178
179 return ret;
180 }
181
182 static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
183 {
184 if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
185 assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
186 } else if (port->mapbase == _Ser3UTCR0) {
187 assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
188 }
189 }
190
191 /*
192 * Enable/Disable wake up events for this serial port.
193 * Obviously, we only support this on the normal COM port.
194 */
195 static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
196 {
197 int err = -EINVAL;
198
199 if (port->mapbase == _Ser3UTCR0) {
200 if (enable)
201 PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
202 else
203 PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
204 err = 0;
205 }
206 return err;
207 }
208
209 static struct sa1100_port_fns h3600_port_fns __initdata = {
210 .set_mctrl = h3600_uart_set_mctrl,
211 .get_mctrl = h3600_uart_get_mctrl,
212 .pm = h3600_uart_pm,
213 .set_wake = h3600_uart_set_wake,
214 };
215
216 /*
217 * helper for sa1100fb
218 */
219 static void h3xxx_lcd_power(int enable)
220 {
221 assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
222 }
223
224 static struct map_desc h3600_io_desc[] __initdata = {
225 { /* static memory bank 2 CS#2 */
226 .virtual = H3600_BANK_2_VIRT,
227 .pfn = __phys_to_pfn(SA1100_CS2_PHYS),
228 .length = 0x02800000,
229 .type = MT_DEVICE
230 }, { /* static memory bank 4 CS#4 */
231 .virtual = H3600_BANK_4_VIRT,
232 .pfn = __phys_to_pfn(SA1100_CS4_PHYS),
233 .length = 0x00800000,
234 .type = MT_DEVICE
235 }, { /* EGPIO 0 CS#5 */
236 .virtual = H3600_EGPIO_VIRT,
237 .pfn = __phys_to_pfn(H3600_EGPIO_PHYS),
238 .length = 0x01000000,
239 .type = MT_DEVICE
240 }
241 };
242
243 /*
244 * Common map_io initialization
245 */
246
247 static void __init h3xxx_map_io(void)
248 {
249 sa1100_map_io();
250 iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
251
252 sa1100_register_uart_fns(&h3600_port_fns);
253 sa1100_register_uart(0, 3); /* Common serial port */
254 // sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
255
256 /* Ensure those pins are outputs and driving low */
257 PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
258 PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
259
260 /* Configure suspend conditions */
261 PGSR = 0;
262 PWER = PWER_GPIO0 | PWER_RTC;
263 PCFR = PCFR_OPDE;
264 PSDR = 0;
265
266 sa1100fb_lcd_power = h3xxx_lcd_power;
267 }
268
269 static __inline__ void do_blank(int setp)
270 {
271 if (ipaq_model_ops.blank_callback)
272 ipaq_model_ops.blank_callback(1-setp);
273 }
274
275 /************************* H3100 *************************/
276
277 #ifdef CONFIG_SA1100_H3100
278
279 #define H3100_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
280 static unsigned int h3100_egpio = 0;
281
282 static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
283 {
284 unsigned int egpio = 0;
285 long gpio = 0;
286 unsigned long flags;
287
288 switch (x) {
289 case IPAQ_EGPIO_LCD_POWER:
290 egpio |= EGPIO_H3600_LCD_ON;
291 gpio |= GPIO_H3100_LCD_3V_ON;
292 do_blank(setp);
293 break;
294 case IPAQ_EGPIO_LCD_ENABLE:
295 break;
296 case IPAQ_EGPIO_CODEC_NRESET:
297 egpio |= EGPIO_H3600_CODEC_NRESET;
298 break;
299 case IPAQ_EGPIO_AUDIO_ON:
300 gpio |= GPIO_H3100_AUD_PWR_ON
301 | GPIO_H3100_AUD_ON;
302 break;
303 case IPAQ_EGPIO_QMUTE:
304 gpio |= GPIO_H3100_QMUTE;
305 break;
306 case IPAQ_EGPIO_OPT_NVRAM_ON:
307 egpio |= EGPIO_H3600_OPT_NVRAM_ON;
308 break;
309 case IPAQ_EGPIO_OPT_ON:
310 egpio |= EGPIO_H3600_OPT_ON;
311 break;
312 case IPAQ_EGPIO_CARD_RESET:
313 egpio |= EGPIO_H3600_CARD_RESET;
314 break;
315 case IPAQ_EGPIO_OPT_RESET:
316 egpio |= EGPIO_H3600_OPT_RESET;
317 break;
318 case IPAQ_EGPIO_IR_ON:
319 gpio |= GPIO_H3100_IR_ON;
320 break;
321 case IPAQ_EGPIO_IR_FSEL:
322 gpio |= GPIO_H3100_IR_FSEL;
323 break;
324 case IPAQ_EGPIO_RS232_ON:
325 egpio |= EGPIO_H3600_RS232_ON;
326 break;
327 case IPAQ_EGPIO_VPP_ON:
328 egpio |= EGPIO_H3600_VPP_ON;
329 break;
330 }
331
332 if (egpio || gpio) {
333 local_irq_save(flags);
334 if (setp) {
335 h3100_egpio |= egpio;
336 GPSR = gpio;
337 } else {
338 h3100_egpio &= ~egpio;
339 GPCR = gpio;
340 }
341 H3100_EGPIO = h3100_egpio;
342 local_irq_restore(flags);
343 }
344 }
345
346 static unsigned long h3100_read_egpio(void)
347 {
348 return h3100_egpio;
349 }
350
351 static int h3100_pm_callback(int req)
352 {
353 if (ipaq_model_ops.pm_callback_aux)
354 return ipaq_model_ops.pm_callback_aux(req);
355 return 0;
356 }
357
358 static struct ipaq_model_ops h3100_model_ops __initdata = {
359 .generic_name = "3100",
360 .control = h3100_control_egpio,
361 .read = h3100_read_egpio,
362 .pm_callback = h3100_pm_callback
363 };
364
365 #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
366 | GPIO_H3100_GPIO3 \
367 | GPIO_H3100_QMUTE \
368 | GPIO_H3100_LCD_3V_ON \
369 | GPIO_H3100_AUD_ON \
370 | GPIO_H3100_AUD_PWR_ON \
371 | GPIO_H3100_IR_ON \
372 | GPIO_H3100_IR_FSEL)
373
374 static void __init h3100_map_io(void)
375 {
376 h3xxx_map_io();
377
378 /* Initialize h3100-specific values here */
379 GPCR = 0x0fffffff; /* All outputs are set low by default */
380 GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
381 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
382 GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
383 H3100_DIRECT_EGPIO;
384
385 /* Older bootldrs put GPIO2-9 in alternate mode on the
386 assumption that they are used for video */
387 GAFR &= ~H3100_DIRECT_EGPIO;
388
389 H3100_EGPIO = h3100_egpio;
390 ipaq_model_ops = h3100_model_ops;
391 }
392
393 MACHINE_START(H3100, "Compaq iPAQ H3100")
394 .phys_io = 0x80000000,
395 .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
396 .boot_params = 0xc0000100,
397 .map_io = h3100_map_io,
398 .init_irq = sa1100_init_irq,
399 .timer = &sa1100_timer,
400 .init_machine = h3xxx_mach_init,
401 MACHINE_END
402
403 #endif /* CONFIG_SA1100_H3100 */
404
405 /************************* H3600 *************************/
406
407 #ifdef CONFIG_SA1100_H3600
408
409 #define H3600_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
410 static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
411
412 static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
413 {
414 unsigned int egpio = 0;
415 unsigned long flags;
416
417 switch (x) {
418 case IPAQ_EGPIO_LCD_POWER:
419 egpio |= EGPIO_H3600_LCD_ON |
420 EGPIO_H3600_LCD_PCI |
421 EGPIO_H3600_LCD_5V_ON |
422 EGPIO_H3600_LVDD_ON;
423 do_blank(setp);
424 break;
425 case IPAQ_EGPIO_LCD_ENABLE:
426 break;
427 case IPAQ_EGPIO_CODEC_NRESET:
428 egpio |= EGPIO_H3600_CODEC_NRESET;
429 break;
430 case IPAQ_EGPIO_AUDIO_ON:
431 egpio |= EGPIO_H3600_AUD_AMP_ON |
432 EGPIO_H3600_AUD_PWR_ON;
433 break;
434 case IPAQ_EGPIO_QMUTE:
435 egpio |= EGPIO_H3600_QMUTE;
436 break;
437 case IPAQ_EGPIO_OPT_NVRAM_ON:
438 egpio |= EGPIO_H3600_OPT_NVRAM_ON;
439 break;
440 case IPAQ_EGPIO_OPT_ON:
441 egpio |= EGPIO_H3600_OPT_ON;
442 break;
443 case IPAQ_EGPIO_CARD_RESET:
444 egpio |= EGPIO_H3600_CARD_RESET;
445 break;
446 case IPAQ_EGPIO_OPT_RESET:
447 egpio |= EGPIO_H3600_OPT_RESET;
448 break;
449 case IPAQ_EGPIO_IR_ON:
450 egpio |= EGPIO_H3600_IR_ON;
451 break;
452 case IPAQ_EGPIO_IR_FSEL:
453 egpio |= EGPIO_H3600_IR_FSEL;
454 break;
455 case IPAQ_EGPIO_RS232_ON:
456 egpio |= EGPIO_H3600_RS232_ON;
457 break;
458 case IPAQ_EGPIO_VPP_ON:
459 egpio |= EGPIO_H3600_VPP_ON;
460 break;
461 }
462
463 if (egpio) {
464 local_irq_save(flags);
465 if (setp)
466 h3600_egpio |= egpio;
467 else
468 h3600_egpio &= ~egpio;
469 H3600_EGPIO = h3600_egpio;
470 local_irq_restore(flags);
471 }
472 }
473
474 static unsigned long h3600_read_egpio(void)
475 {
476 return h3600_egpio;
477 }
478
479 static int h3600_pm_callback(int req)
480 {
481 if (ipaq_model_ops.pm_callback_aux)
482 return ipaq_model_ops.pm_callback_aux(req);
483 return 0;
484 }
485
486 static struct ipaq_model_ops h3600_model_ops __initdata = {
487 .generic_name = "3600",
488 .control = h3600_control_egpio,
489 .read = h3600_read_egpio,
490 .pm_callback = h3600_pm_callback
491 };
492
493 static void __init h3600_map_io(void)
494 {
495 h3xxx_map_io();
496
497 /* Initialize h3600-specific values here */
498
499 GPCR = 0x0fffffff; /* All outputs are set low by default */
500 GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
501 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
502 GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
503 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
504 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
505
506 H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
507 ipaq_model_ops = h3600_model_ops;
508 }
509
510 MACHINE_START(H3600, "Compaq iPAQ H3600")
511 .phys_io = 0x80000000,
512 .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
513 .boot_params = 0xc0000100,
514 .map_io = h3600_map_io,
515 .init_irq = sa1100_init_irq,
516 .timer = &sa1100_timer,
517 .init_machine = h3xxx_mach_init,
518 MACHINE_END
519
520 #endif /* CONFIG_SA1100_H3600 */
521
522 #ifdef CONFIG_SA1100_H3800
523
524 #define SET_ASIC1(x) \
525 do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
526
527 #define SET_ASIC2(x) \
528 do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
529
530 #define CLEAR_ASIC1(x) \
531 do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
532
533 #define CLEAR_ASIC2(x) \
534 do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
535
536
537 /*
538 On screen enable, we get
539
540 h3800_video_power_on(1)
541 LCD controller starts
542 h3800_video_lcd_enable(1)
543
544 On screen disable, we get
545
546 h3800_video_lcd_enable(0)
547 LCD controller stops
548 h3800_video_power_on(0)
549 */
550
551
552 static void h3800_video_power_on(int setp)
553 {
554 if (setp) {
555 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
556 msleep(30);
557 H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
558 msleep(5);
559 H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
560 msleep(50);
561 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
562 msleep(5);
563 } else {
564 msleep(5);
565 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
566 msleep(50);
567 H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
568 msleep(5);
569 H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
570 msleep(100);
571 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
572 }
573 }
574
575 static void h3800_video_lcd_enable(int setp)
576 {
577 if (setp) {
578 msleep(17); // Wait one from before turning on
579 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
580 } else {
581 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
582 msleep(30); // Wait before turning off
583 }
584 }
585
586
587 static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
588 {
589 switch (x) {
590 case IPAQ_EGPIO_LCD_POWER:
591 h3800_video_power_on(setp);
592 break;
593 case IPAQ_EGPIO_LCD_ENABLE:
594 h3800_video_lcd_enable(setp);
595 break;
596 case IPAQ_EGPIO_CODEC_NRESET:
597 case IPAQ_EGPIO_AUDIO_ON:
598 case IPAQ_EGPIO_QMUTE:
599 printk("%s: error - should not be called\n", __FUNCTION__);
600 break;
601 case IPAQ_EGPIO_OPT_NVRAM_ON:
602 SET_ASIC2(GPIO2_OPT_ON_NVRAM);
603 break;
604 case IPAQ_EGPIO_OPT_ON:
605 SET_ASIC2(GPIO2_OPT_ON);
606 break;
607 case IPAQ_EGPIO_CARD_RESET:
608 SET_ASIC2(GPIO2_OPT_PCM_RESET);
609 break;
610 case IPAQ_EGPIO_OPT_RESET:
611 SET_ASIC2(GPIO2_OPT_RESET);
612 break;
613 case IPAQ_EGPIO_IR_ON:
614 CLEAR_ASIC1(GPIO1_IR_ON_N);
615 break;
616 case IPAQ_EGPIO_IR_FSEL:
617 break;
618 case IPAQ_EGPIO_RS232_ON:
619 SET_ASIC1(GPIO1_RS232_ON);
620 break;
621 case IPAQ_EGPIO_VPP_ON:
622 H3800_ASIC2_FlashWP_VPP_ON = setp;
623 break;
624 }
625 }
626
627 static unsigned long h3800_read_egpio(void)
628 {
629 return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
630 }
631
632 /* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
633 it doesn't appear that ASIC1 GPIO has the same problem */
634
635 static int h3800_pm_callback(int req)
636 {
637 static u16 asic1_data;
638 static u16 asic2_data;
639 int result = 0;
640
641 printk("%s %d\n", __FUNCTION__, req);
642
643 switch (req) {
644 case PM_RESUME:
645 MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
646
647 H3800_ASIC2_GPIOPIOD = asic2_data;
648 H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
649 | GPIO2_SD_DETECT
650 | GPIO2_EAR_IN_N
651 | GPIO2_USB_DETECT_N
652 | GPIO2_SD_CON_SLT;
653
654 H3800_ASIC1_GPIO_OUT = asic1_data;
655
656 if (ipaq_model_ops.pm_callback_aux)
657 result = ipaq_model_ops.pm_callback_aux(req);
658 break;
659
660 case PM_SUSPEND:
661 if (ipaq_model_ops.pm_callback_aux &&
662 ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
663 return result;
664
665 asic1_data = H3800_ASIC1_GPIO_OUT;
666 asic2_data = H3800_ASIC2_GPIOPIOD;
667 break;
668 default:
669 printk("%s: unrecognized PM callback\n", __FUNCTION__);
670 break;
671 }
672 return result;
673 }
674
675 static struct ipaq_model_ops h3800_model_ops __initdata = {
676 .generic_name = "3800",
677 .control = h3800_control_egpio,
678 .read = h3800_read_egpio,
679 .pm_callback = h3800_pm_callback
680 };
681
682 #define MAX_ASIC_ISR_LOOPS 20
683
684 /* The order of these is important - see #include <asm/arch/irqs.h> */
685 static u32 kpio_irq_mask[] = {
686 KPIO_KEY_ALL,
687 KPIO_SPI_INT,
688 KPIO_OWM_INT,
689 KPIO_ADC_INT,
690 KPIO_UART_0_INT,
691 KPIO_UART_1_INT,
692 KPIO_TIMER_0_INT,
693 KPIO_TIMER_1_INT,
694 KPIO_TIMER_2_INT
695 };
696
697 static u32 gpio_irq_mask[] = {
698 GPIO2_PEN_IRQ,
699 GPIO2_SD_DETECT,
700 GPIO2_EAR_IN_N,
701 GPIO2_USB_DETECT_N,
702 GPIO2_SD_CON_SLT,
703 };
704
705 static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
706 {
707 int i;
708
709 if (0) printk("%s: interrupt received\n", __FUNCTION__);
710
711 desc->chip->ack(irq);
712
713 for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
714 u32 irq;
715 int j;
716
717 /* KPIO */
718 irq = H3800_ASIC2_KPIINTFLAG;
719 if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
720 for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
721 if (irq & kpio_irq_mask[j])
722 handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
723
724 /* GPIO2 */
725 irq = H3800_ASIC2_GPIINTFLAG;
726 if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
727 for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
728 if (irq & gpio_irq_mask[j])
729 handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
730 }
731
732 if (i >= MAX_ASIC_ISR_LOOPS)
733 printk("%s: interrupt processing overrun\n", __FUNCTION__);
734
735 /* For level-based interrupts */
736 desc->chip->unmask(irq);
737
738 }
739
740 static struct irqaction h3800_irq = {
741 .name = "h3800_asic",
742 .handler = h3800_IRQ_demux,
743 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
744 };
745
746 u32 kpio_int_shadow = 0;
747
748
749 /* mask_ack <- IRQ is first serviced.
750 mask <- IRQ is disabled.
751 unmask <- IRQ is enabled
752
753 The INTCLR registers are poorly documented. I believe that writing
754 a "1" to the register clears the specific interrupt, but the documentation
755 indicates writing a "0" clears the interrupt. In any case, they shouldn't
756 be read (that's the INTFLAG register)
757 */
758
759 static void h3800_mask_ack_kpio_irq(unsigned int irq)
760 {
761 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
762 kpio_int_shadow &= ~mask;
763 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
764 H3800_ASIC2_KPIINTCLR = mask;
765 }
766
767 static void h3800_mask_kpio_irq(unsigned int irq)
768 {
769 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
770 kpio_int_shadow &= ~mask;
771 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
772 }
773
774 static void h3800_unmask_kpio_irq(unsigned int irq)
775 {
776 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
777 kpio_int_shadow |= mask;
778 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
779 }
780
781 static void h3800_mask_ack_gpio_irq(unsigned int irq)
782 {
783 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
784 H3800_ASIC2_GPIINTSTAT &= ~mask;
785 H3800_ASIC2_GPIINTCLR = mask;
786 }
787
788 static void h3800_mask_gpio_irq(unsigned int irq)
789 {
790 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
791 H3800_ASIC2_GPIINTSTAT &= ~mask;
792 }
793
794 static void h3800_unmask_gpio_irq(unsigned int irq)
795 {
796 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
797 H3800_ASIC2_GPIINTSTAT |= mask;
798 }
799
800 static void __init h3800_init_irq(void)
801 {
802 int i;
803
804 /* Initialize standard IRQs */
805 sa1100_init_irq();
806
807 /* Disable all IRQs and set up clock */
808 H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
809 H3800_ASIC2_GPIINTSTAT = 0;
810
811 H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
812 H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
813
814 // H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
815 // H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
816
817 H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
818 H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
819 H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
820 H3800_ASIC2_INTR_TimerSet = 1;
821
822 #if 0
823 for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
824 int irq = i + H3800_KPIO_IRQ_START;
825 irq_desc[irq].valid = 1;
826 irq_desc[irq].probe_ok = 1;
827 set_irq_chip(irq, &h3800_kpio_irqchip);
828 }
829
830 for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
831 int irq = i + H3800_GPIO_IRQ_START;
832 irq_desc[irq].valid = 1;
833 irq_desc[irq].probe_ok = 1;
834 set_irq_chip(irq, &h3800_gpio_irqchip);
835 }
836 #endif
837 set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
838 set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
839 }
840
841
842 #define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
843
844 static void __init h3800_map_io(void)
845 {
846 h3xxx_map_io();
847
848 /* Add wakeup on AC plug/unplug */
849 PWER |= PWER_GPIO12;
850
851 /* Initialize h3800-specific values here */
852 GPCR = 0x0fffffff; /* All outputs are set low by default */
853 GAFR = GPIO_H3800_CLK_OUT |
854 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
855 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
856 GPDR = GPIO_H3800_CLK_OUT |
857 GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
858 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
859 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
860 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
861 TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
862
863 /* Fix the memory bus */
864 MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
865
866 /* Set up ASIC #1 */
867 H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
868 H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
869 H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
870 H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
871 H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
872 H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
873 H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
874
875 H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
876 | GPIO1_RS232_ON
877 | GPIO1_EAR_ON_N;
878
879 /* Set up ASIC #2 */
880 H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
881 H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
882
883 H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
884 | GPIO2_SD_DETECT
885 | GPIO2_EAR_IN_N
886 | GPIO2_USB_DETECT_N
887 | GPIO2_SD_CON_SLT;
888
889 /* TODO : Set sleep states & battery fault states */
890
891 /* Clear VPP Enable */
892 H3800_ASIC2_FlashWP_VPP_ON = 0;
893 ipaq_model_ops = h3800_model_ops;
894 }
895
896 MACHINE_START(H3800, "Compaq iPAQ H3800")
897 .phys_io = 0x80000000,
898 .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
899 .boot_params = 0xc0000100,
900 .map_io = h3800_map_io,
901 .init_irq = h3800_init_irq,
902 .timer = &sa1100_timer,
903 .init_machine = h3xxx_mach_init,
904 MACHINE_END
905
906 #endif /* CONFIG_SA1100_H3800 */
Verdex Pro support