arch/blackfin/oprofile/common.c

   1 /*
   2  * File:         arch/blackfin/oprofile/common.c
   3  * Based on:     arch/alpha/oprofile/common.c
   4  * Author:       Anton Blanchard <anton@au.ibm.com>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
  11  *               Copyright 2004-2006 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/oprofile.h>
  32 #include <linux/init.h>
  33 #include <linux/smp.h>
  34 #include <linux/errno.h>
  35 #include <linux/mutex.h>
  36
  37 #include <asm/ptrace.h>
  38 #include <asm/system.h>
  39 #include <asm/blackfin.h>
  40 #include <asm/irq.h>
  41 #include <asm/io.h>
  42
  43 #include "op_blackfin.h"
  44
  45 #define BFIN_533_ID  0xE5040003
  46 #define BFIN_537_ID  0xE5040002
  47
  48 static int pfmon_enabled;
  49 static struct mutex pfmon_lock;
  50
  51 struct op_bfin533_model *model;
  52
  53 struct op_counter_config ctr[OP_MAX_COUNTER];
  54
  55 static int op_bfin_setup(void)
  56 {
  57         int ret;
  58
  59         /* Pre-compute the values to stuff in the hardware registers.  */
  60         spin_lock(&oprofilefs_lock);
  61         ret = model->reg_setup(ctr);
  62         spin_unlock(&oprofilefs_lock);
  63
  64         return ret;
  65 }
  66
  67 static void op_bfin_shutdown(void)
  68 {
  69 #if 0
  70         /* what is the difference between shutdown and stop? */
  71 #endif
  72 }
  73
  74 static int op_bfin_start(void)
  75 {
  76         int ret = -EBUSY;
  77
  78         printk(KERN_INFO "KSDBG:in %s\n", __FUNCTION__);
  79         mutex_lock(&pfmon_lock);
  80         if (!pfmon_enabled) {
  81                 ret = model->start(ctr);
  82                 pfmon_enabled = !ret;
  83         }
  84         mutex_unlock(&pfmon_lock);
  85
  86         return ret;
  87 }
  88
  89 static void op_bfin_stop(void)
  90 {
  91         mutex_lock(&pfmon_lock);
  92         if (pfmon_enabled) {
  93                 model->stop();
  94                 pfmon_enabled = 0;
  95         }
  96         mutex_unlock(&pfmon_lock);
  97 }
  98
  99 static int op_bfin_create_files(struct super_block *sb, struct dentry *root)
 100 {
 101         int i;
 102
 103         for (i = 0; i < model->num_counters; ++i) {
 104                 struct dentry *dir;
 105                 char buf[3];
 106                 printk(KERN_INFO "Oprofile: creating files... \n");
 107
 108                 snprintf(buf, sizeof buf, "%d", i);
 109                 dir = oprofilefs_mkdir(sb, root, buf);
 110
 111                 oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
 112                 oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
 113                 oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
 114                 /*
 115                  * We dont support per counter user/kernel selection, but
 116                  * we leave the entries because userspace expects them
 117                  */
 118                 oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
 119                 oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
 120                 oprofilefs_create_ulong(sb, dir, "unit_mask",
 121                                         &ctr[i].unit_mask);
 122         }
 123
 124         return 0;
 125 }
 126 int __init oprofile_arch_init(struct oprofile_operations *ops)
 127 {
 128 #ifdef CONFIG_HARDWARE_PM
 129         unsigned int dspid;
 130
 131         mutex_init(&pfmon_lock);
 132
 133         dspid = bfin_read_DSPID();
 134
 135         printk(KERN_INFO "Oprofile got the cpu id is 0x%x. \n", dspid);
 136
 137         switch (dspid) {
 138         case BFIN_533_ID:
 139                 model = &op_model_bfin533;
 140                 model->num_counters = 2;
 141                 break;
 142         case BFIN_537_ID:
 143                 model = &op_model_bfin533;
 144                 model->num_counters = 2;
 145                 break;
 146         default:
 147                 return -ENODEV;
 148         }
 149
 150         ops->cpu_type = model->name;
 151         ops->create_files = op_bfin_create_files;
 152         ops->setup = op_bfin_setup;
 153         ops->shutdown = op_bfin_shutdown;
 154         ops->start = op_bfin_start;
 155         ops->stop = op_bfin_stop;
 156
 157         printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
 158                ops->cpu_type);
 159
 160         return 0;
 161 #else
 162         return -1;
 163 #endif
 164 }
 165
 166 void oprofile_arch_exit(void)
 167 {
 168 }