arch/ia64/kernel/signal.c

   1 /*
   2  * Architecture-specific signal handling support.
   3  *
   4  * Copyright (C) 1999-2004 Hewlett-Packard Co
   5  *      David Mosberger-Tang <davidm@hpl.hp.com>
   6  *
   7  * Derived from i386 and Alpha versions.
   8  */
   9
  10 #include <linux/errno.h>
  11 #include <linux/kernel.h>
  12 #include <linux/mm.h>
  13 #include <linux/ptrace.h>
  14 #include <linux/sched.h>
  15 #include <linux/signal.h>
  16 #include <linux/smp.h>
  17 #include <linux/stddef.h>
  18 #include <linux/tty.h>
  19 #include <linux/binfmts.h>
  20 #include <linux/unistd.h>
  21 #include <linux/wait.h>
  22
  23 #include <asm/ia32.h>
  24 #include <asm/intrinsics.h>
  25 #include <asm/uaccess.h>
  26 #include <asm/rse.h>
  27 #include <asm/sigcontext.h>
  28
  29 #include "sigframe.h"
  30
  31 #define DEBUG_SIG       0
  32 #define STACK_ALIGN     16              /* minimal alignment for stack pointer */
  33 #define _BLOCKABLE      (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
  34
  35 #if _NSIG_WORDS > 1
  36 # define PUT_SIGSET(k,u)        __copy_to_user((u)->sig, (k)->sig, sizeof(sigset_t))
  37 # define GET_SIGSET(k,u)        __copy_from_user((k)->sig, (u)->sig, sizeof(sigset_t))
  38 #else
  39 # define PUT_SIGSET(k,u)        __put_user((k)->sig[0], &(u)->sig[0])
  40 # define GET_SIGSET(k,u)        __get_user((k)->sig[0], &(u)->sig[0])
  41 #endif
  42
  43 asmlinkage long
  44 sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2,
  45                  long arg3, long arg4, long arg5, long arg6, long arg7,
  46                  struct pt_regs regs)
  47 {
  48         return do_sigaltstack(uss, uoss, regs.r12);
  49 }
  50
  51 static long
  52 restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr)
  53 {
  54         unsigned long ip, flags, nat, um, cfm, rsc;
  55         long err;
  56
  57         /* Always make any pending restarted system calls return -EINTR */
  58         current_thread_info()->restart_block.fn = do_no_restart_syscall;
  59
  60         /* restore scratch that always needs gets updated during signal delivery: */
  61         err  = __get_user(flags, &sc->sc_flags);
  62         err |= __get_user(nat, &sc->sc_nat);
  63         err |= __get_user(ip, &sc->sc_ip);                      /* instruction pointer */
  64         err |= __get_user(cfm, &sc->sc_cfm);
  65         err |= __get_user(um, &sc->sc_um);                      /* user mask */
  66         err |= __get_user(rsc, &sc->sc_ar_rsc);
  67         err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat);
  68         err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);
  69         err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
  70         err |= __get_user(scr->pt.pr, &sc->sc_pr);              /* predicates */
  71         err |= __get_user(scr->pt.b0, &sc->sc_br[0]);           /* b0 (rp) */
  72         err |= __get_user(scr->pt.b6, &sc->sc_br[6]);           /* b6 */
  73         err |= __copy_from_user(&scr->pt.r1, &sc->sc_gr[1], 8); /* r1 */
  74         err |= __copy_from_user(&scr->pt.r8, &sc->sc_gr[8], 4*8);       /* r8-r11 */
  75         err |= __copy_from_user(&scr->pt.r12, &sc->sc_gr[12], 2*8);     /* r12-r13 */
  76         err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8);       /* r15 */
  77
  78         scr->pt.cr_ifs = cfm | (1UL << 63);
  79         scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */
  80
  81         /* establish new instruction pointer: */
  82         scr->pt.cr_iip = ip & ~0x3UL;
  83         ia64_psr(&scr->pt)->ri = ip & 0x3;
  84         scr->pt.cr_ipsr = (scr->pt.cr_ipsr & ~IA64_PSR_UM) | (um & IA64_PSR_UM);
  85
  86         scr->scratch_unat = ia64_put_scratch_nat_bits(&scr->pt, nat);
  87
  88         if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
  89                 /* Restore most scratch-state only when not in syscall. */
  90                 err |= __get_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);              /* ar.ccv */
  91                 err |= __get_user(scr->pt.b7, &sc->sc_br[7]);                   /* b7 */
  92                 err |= __get_user(scr->pt.r14, &sc->sc_gr[14]);                 /* r14 */
  93                 err |= __copy_from_user(&scr->pt.ar_csd, &sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
  94                 err |= __copy_from_user(&scr->pt.r2, &sc->sc_gr[2], 2*8);       /* r2-r3 */
  95                 err |= __copy_from_user(&scr->pt.r16, &sc->sc_gr[16], 16*8);    /* r16-r31 */
  96         }
  97
  98         if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
  99                 struct ia64_psr *psr = ia64_psr(&scr->pt);
 100
 101                 __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
 102                 psr->mfh = 0;   /* drop signal handler's fph contents... */
 103                 preempt_disable();
 104                 if (psr->dfh)
 105                         ia64_drop_fpu(current);
 106                 else {
 107                         /* We already own the local fph, otherwise psr->dfh wouldn't be 0.  */
 108                         __ia64_load_fpu(current->thread.fph);
 109                         ia64_set_local_fpu_owner(current);
 110                 }
 111                 preempt_enable();
 112         }
 113         return err;
 114 }
 115
 116 int
 117 copy_siginfo_to_user (siginfo_t __user *to, siginfo_t *from)
 118 {
 119         if (!access_ok(VERIFY_WRITE, to, sizeof(siginfo_t)))
 120                 return -EFAULT;
 121         if (from->si_code < 0) {
 122                 if (__copy_to_user(to, from, sizeof(siginfo_t)))
 123                         return -EFAULT;
 124                 return 0;
 125         } else {
 126                 int err;
 127
 128                 /*
 129                  * If you change siginfo_t structure, please be sure this code is fixed
 130                  * accordingly.  It should never copy any pad contained in the structure
 131                  * to avoid security leaks, but must copy the generic 3 ints plus the
 132                  * relevant union member.
 133                  */
 134                 err = __put_user(from->si_signo, &to->si_signo);
 135                 err |= __put_user(from->si_errno, &to->si_errno);
 136                 err |= __put_user((short)from->si_code, &to->si_code);
 137                 switch (from->si_code >> 16) {
 138                       case __SI_FAULT >> 16:
 139                         err |= __put_user(from->si_flags, &to->si_flags);
 140                         err |= __put_user(from->si_isr, &to->si_isr);
 141                       case __SI_POLL >> 16:
 142                         err |= __put_user(from->si_addr, &to->si_addr);
 143                         err |= __put_user(from->si_imm, &to->si_imm);
 144                         break;
 145                       case __SI_TIMER >> 16:
 146                         err |= __put_user(from->si_tid, &to->si_tid);
 147                         err |= __put_user(from->si_overrun, &to->si_overrun);
 148                         err |= __put_user(from->si_ptr, &to->si_ptr);
 149                         break;
 150                       case __SI_RT >> 16:       /* Not generated by the kernel as of now.  */
 151                       case __SI_MESGQ >> 16:
 152                         err |= __put_user(from->si_uid, &to->si_uid);
 153                         err |= __put_user(from->si_pid, &to->si_pid);
 154                         err |= __put_user(from->si_ptr, &to->si_ptr);
 155                         break;
 156                       case __SI_CHLD >> 16:
 157                         err |= __put_user(from->si_utime, &to->si_utime);
 158                         err |= __put_user(from->si_stime, &to->si_stime);
 159                         err |= __put_user(from->si_status, &to->si_status);
 160                       default:
 161                         err |= __put_user(from->si_uid, &to->si_uid);
 162                         err |= __put_user(from->si_pid, &to->si_pid);
 163                         break;
 164                 }
 165                 return err;
 166         }
 167 }
 168
 169 long
 170 ia64_rt_sigreturn (struct sigscratch *scr)
 171 {
 172         extern char ia64_strace_leave_kernel, ia64_leave_kernel;
 173         struct sigcontext __user *sc;
 174         struct siginfo si;
 175         sigset_t set;
 176         long retval;
 177
 178         sc = &((struct sigframe __user *) (scr->pt.r12 + 16))->sc;
 179
 180         /*
 181          * When we return to the previously executing context, r8 and r10 have already
 182          * been setup the way we want them.  Indeed, if the signal wasn't delivered while
 183          * in a system call, we must not touch r8 or r10 as otherwise user-level state
 184          * could be corrupted.
 185          */
 186         retval = (long) &ia64_leave_kernel;
 187         if (test_thread_flag(TIF_SYSCALL_TRACE)
 188             || test_thread_flag(TIF_SYSCALL_AUDIT))
 189                 /*
 190                  * strace expects to be notified after sigreturn returns even though the
 191                  * context to which we return may not be in the middle of a syscall.
 192                  * Thus, the return-value that strace displays for sigreturn is
 193                  * meaningless.
 194                  */
 195                 retval = (long) &ia64_strace_leave_kernel;
 196
 197         if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
 198                 goto give_sigsegv;
 199
 200         if (GET_SIGSET(&set, &sc->sc_mask))
 201                 goto give_sigsegv;
 202
 203         sigdelsetmask(&set, ~_BLOCKABLE);
 204
 205         spin_lock_irq(&current->sighand->siglock);
 206         {
 207                 current->blocked = set;
 208                 recalc_sigpending();
 209         }
 210         spin_unlock_irq(&current->sighand->siglock);
 211
 212         if (restore_sigcontext(sc, scr))
 213                 goto give_sigsegv;
 214
 215 #if DEBUG_SIG
 216         printk("SIG return (%s:%d): sp=%lx ip=%lx\n",
 217                current->comm, current->pid, scr->pt.r12, scr->pt.cr_iip);
 218 #endif
 219         /*
 220          * It is more difficult to avoid calling this function than to
 221          * call it and ignore errors.
 222          */
 223         do_sigaltstack(&sc->sc_stack, NULL, scr->pt.r12);
 224         return retval;
 225
 226   give_sigsegv:
 227         si.si_signo = SIGSEGV;
 228         si.si_errno = 0;
 229         si.si_code = SI_KERNEL;
 230         si.si_pid = current->pid;
 231         si.si_uid = current->uid;
 232         si.si_addr = sc;
 233         force_sig_info(SIGSEGV, &si, current);
 234         return retval;
 235 }
 236
 237 /*
 238  * This does just the minimum required setup of sigcontext.
 239  * Specifically, it only installs data that is either not knowable at
 240  * the user-level or that gets modified before execution in the
 241  * trampoline starts.  Everything else is done at the user-level.
 242  */
 243 static long
 244 setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
 245 {
 246         unsigned long flags = 0, ifs, cfm, nat;
 247         long err;
 248
 249         ifs = scr->pt.cr_ifs;
 250
 251         if (on_sig_stack((unsigned long) sc))
 252                 flags |= IA64_SC_FLAG_ONSTACK;
 253         if ((ifs & (1UL << 63)) == 0)
 254                 /* if cr_ifs doesn't have the valid bit set, we got here through a syscall */
 255                 flags |= IA64_SC_FLAG_IN_SYSCALL;
 256         cfm = ifs & ((1UL << 38) - 1);
 257         ia64_flush_fph(current);
 258         if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
 259                 flags |= IA64_SC_FLAG_FPH_VALID;
 260                 __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
 261         }
 262
 263         nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
 264
 265         err  = __put_user(flags, &sc->sc_flags);
 266         err |= __put_user(nat, &sc->sc_nat);
 267         err |= PUT_SIGSET(mask, &sc->sc_mask);
 268         err |= __put_user(cfm, &sc->sc_cfm);
 269         err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um);
 270         err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc);
 271         err |= __put_user(scr->pt.ar_unat, &sc->sc_ar_unat);            /* ar.unat */
 272         err |= __put_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);            /* ar.fpsr */
 273         err |= __put_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
 274         err |= __put_user(scr->pt.pr, &sc->sc_pr);                      /* predicates */
 275         err |= __put_user(scr->pt.b0, &sc->sc_br[0]);                   /* b0 (rp) */
 276         err |= __put_user(scr->pt.b6, &sc->sc_br[6]);                   /* b6 */
 277         err |= __copy_to_user(&sc->sc_gr[1], &scr->pt.r1, 8);           /* r1 */
 278         err |= __copy_to_user(&sc->sc_gr[8], &scr->pt.r8, 4*8);         /* r8-r11 */
 279         err |= __copy_to_user(&sc->sc_gr[12], &scr->pt.r12, 2*8);       /* r12-r13 */
 280         err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8);         /* r15 */
 281         err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
 282
 283         if (flags & IA64_SC_FLAG_IN_SYSCALL) {
 284                 /* Clear scratch registers if the signal interrupted a system call. */
 285                 err |= __put_user(0, &sc->sc_ar_ccv);                           /* ar.ccv */
 286                 err |= __put_user(0, &sc->sc_br[7]);                            /* b7 */
 287                 err |= __put_user(0, &sc->sc_gr[14]);                           /* r14 */
 288                 err |= __clear_user(&sc->sc_ar25, 2*8);                 /* ar.csd & ar.ssd */
 289                 err |= __clear_user(&sc->sc_gr[2], 2*8);                        /* r2-r3 */
 290                 err |= __clear_user(&sc->sc_gr[16], 16*8);                      /* r16-r31 */
 291         } else {
 292                 /* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
 293                 err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);              /* ar.ccv */
 294                 err |= __put_user(scr->pt.b7, &sc->sc_br[7]);                   /* b7 */
 295                 err |= __put_user(scr->pt.r14, &sc->sc_gr[14]);                 /* r14 */
 296                 err |= __copy_to_user(&sc->sc_ar25, &scr->pt.ar_csd, 2*8); /* ar.csd & ar.ssd */
 297                 err |= __copy_to_user(&sc->sc_gr[2], &scr->pt.r2, 2*8);         /* r2-r3 */
 298                 err |= __copy_to_user(&sc->sc_gr[16], &scr->pt.r16, 16*8);      /* r16-r31 */
 299         }
 300         return err;
 301 }
 302
 303 /*
 304  * Check whether the register-backing store is already on the signal stack.
 305  */
 306 static inline int
 307 rbs_on_sig_stack (unsigned long bsp)
 308 {
 309         return (bsp - current->sas_ss_sp < current->sas_ss_size);
 310 }
 311
 312 static long
 313 force_sigsegv_info (int sig, void __user *addr)
 314 {
 315         unsigned long flags;
 316         struct siginfo si;
 317
 318         if (sig == SIGSEGV) {
 319                 /*
 320                  * Acquiring siglock around the sa_handler-update is almost
 321                  * certainly overkill, but this isn't a
 322                  * performance-critical path and I'd rather play it safe
 323                  * here than having to debug a nasty race if and when
 324                  * something changes in kernel/signal.c that would make it
 325                  * no longer safe to modify sa_handler without holding the
 326                  * lock.
 327                  */
 328                 spin_lock_irqsave(&current->sighand->siglock, flags);
 329                 current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
 330                 spin_unlock_irqrestore(&current->sighand->siglock, flags);
 331         }
 332         si.si_signo = SIGSEGV;
 333         si.si_errno = 0;
 334         si.si_code = SI_KERNEL;
 335         si.si_pid = current->pid;
 336         si.si_uid = current->uid;
 337         si.si_addr = addr;
 338         force_sig_info(SIGSEGV, &si, current);
 339         return 0;
 340 }
 341
 342 static long
 343 setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
 344              struct sigscratch *scr)
 345 {
 346         extern char __kernel_sigtramp[];
 347         unsigned long tramp_addr, new_rbs = 0, new_sp;
 348         struct sigframe __user *frame;
 349         long err;
 350
 351         new_sp = scr->pt.r12;
 352         tramp_addr = (unsigned long) __kernel_sigtramp;
 353         if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
 354                 new_sp = current->sas_ss_sp + current->sas_ss_size;
 355                 /*
 356                  * We need to check for the register stack being on the signal stack
 357                  * separately, because it's switched separately (memory stack is switched
 358                  * in the kernel, register stack is switched in the signal trampoline).
 359                  */
 360                 if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
 361                         new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
 362         }
 363         frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
 364
 365         if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 366                 return force_sigsegv_info(sig, frame);
 367
 368         err  = __put_user(sig, &frame->arg0);
 369         err |= __put_user(&frame->info, &frame->arg1);
 370         err |= __put_user(&frame->sc, &frame->arg2);
 371         err |= __put_user(new_rbs, &frame->sc.sc_rbs_base);
 372         err |= __put_user(0, &frame->sc.sc_loadrs);     /* initialize to zero */
 373         err |= __put_user(ka->sa.sa_handler, &frame->handler);
 374
 375         err |= copy_siginfo_to_user(&frame->info, info);
 376
 377         err |= __put_user(current->sas_ss_sp, &frame->sc.sc_stack.ss_sp);
 378         err |= __put_user(current->sas_ss_size, &frame->sc.sc_stack.ss_size);
 379         err |= __put_user(sas_ss_flags(scr->pt.r12), &frame->sc.sc_stack.ss_flags);
 380         err |= setup_sigcontext(&frame->sc, set, scr);
 381
 382         if (unlikely(err))
 383                 return force_sigsegv_info(sig, frame);
 384
 385         scr->pt.r12 = (unsigned long) frame - 16;       /* new stack pointer */
 386         scr->pt.ar_fpsr = FPSR_DEFAULT;                 /* reset fpsr for signal handler */
 387         scr->pt.cr_iip = tramp_addr;
 388         ia64_psr(&scr->pt)->ri = 0;                     /* start executing in first slot */
 389         ia64_psr(&scr->pt)->be = 0;                     /* force little-endian byte-order */
 390         /*
 391          * Force the interruption function mask to zero.  This has no effect when a
 392          * system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is
 393          * ignored), but it has the desirable effect of making it possible to deliver a
 394          * signal with an incomplete register frame (which happens when a mandatory RSE
 395          * load faults).  Furthermore, it has no negative effect on the getting the user's
 396          * dirty partition preserved, because that's governed by scr->pt.loadrs.
 397          */
 398         scr->pt.cr_ifs = (1UL << 63);
 399
 400         /*
 401          * Note: this affects only the NaT bits of the scratch regs (the ones saved in
 402          * pt_regs), which is exactly what we want.
 403          */
 404         scr->scratch_unat = 0; /* ensure NaT bits of r12 is clear */
 405
 406 #if DEBUG_SIG
 407         printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n",
 408                current->comm, current->pid, sig, scr->pt.r12, frame->sc.sc_ip, frame->handler);
 409 #endif
 410         return 1;
 411 }
 412
 413 static long
 414 handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset,
 415                struct sigscratch *scr)
 416 {
 417         if (IS_IA32_PROCESS(&scr->pt)) {
 418                 /* send signal to IA-32 process */
 419                 if (!ia32_setup_frame1(sig, ka, info, oldset, &scr->pt))
 420                         return 0;
 421         } else
 422                 /* send signal to IA-64 process */
 423                 if (!setup_frame(sig, ka, info, oldset, scr))
 424                         return 0;
 425
 426         spin_lock_irq(&current->sighand->siglock);
 427         sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
 428         if (!(ka->sa.sa_flags & SA_NODEFER))
 429                 sigaddset(&current->blocked, sig);
 430         recalc_sigpending();
 431         spin_unlock_irq(&current->sighand->siglock);
 432         return 1;
 433 }
 434
 435 /*
 436  * Note that `init' is a special process: it doesn't get signals it doesn't want to
 437  * handle.  Thus you cannot kill init even with a SIGKILL even by mistake.
 438  */
 439 void
 440 ia64_do_signal (struct sigscratch *scr, long in_syscall)
 441 {
 442         struct k_sigaction ka;
 443         sigset_t *oldset;
 444         siginfo_t info;
 445         long restart = in_syscall;
 446         long errno = scr->pt.r8;
 447 #       define ERR_CODE(c)      (IS_IA32_PROCESS(&scr->pt) ? -(c) : (c))
 448
 449         /*
 450          * In the ia64_leave_kernel code path, we want the common case to go fast, which
 451          * is why we may in certain cases get here from kernel mode. Just return without
 452          * doing anything if so.
 453          */
 454         if (!user_mode(&scr->pt))
 455                 return;
 456
 457         if (test_thread_flag(TIF_RESTORE_SIGMASK))
 458                 oldset = &current->saved_sigmask;
 459         else
 460                 oldset = &current->blocked;
 461
 462         /*
 463          * This only loops in the rare cases of handle_signal() failing, in which case we
 464          * need to push through a forced SIGSEGV.
 465          */
 466         while (1) {
 467                 int signr = get_signal_to_deliver(&info, &ka, &scr->pt, NULL);
 468
 469                 /*
 470                  * get_signal_to_deliver() may have run a debugger (via notify_parent())
 471                  * and the debugger may have modified the state (e.g., to arrange for an
 472                  * inferior call), thus it's important to check for restarting _after_
 473                  * get_signal_to_deliver().
 474                  */
 475                 if (IS_IA32_PROCESS(&scr->pt)) {
 476                         if (in_syscall) {
 477                                 if (errno >= 0)
 478                                         restart = 0;
 479                                 else
 480                                         errno = -errno;
 481                         }
 482                 } else if ((long) scr->pt.r10 != -1)
 483                         /*
 484                          * A system calls has to be restarted only if one of the error codes
 485                          * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned.  If r10
 486                          * isn't -1 then r8 doesn't hold an error code and we don't need to
 487                          * restart the syscall, so we can clear the "restart" flag here.
 488                          */
 489                         restart = 0;
 490
 491                 if (signr <= 0)
 492                         break;
 493
 494                 if (unlikely(restart)) {
 495                         switch (errno) {
 496                               case ERESTART_RESTARTBLOCK:
 497                               case ERESTARTNOHAND:
 498                                 scr->pt.r8 = ERR_CODE(EINTR);
 499                                 /* note: scr->pt.r10 is already -1 */
 500                                 break;
 501
 502                               case ERESTARTSYS:
 503                                 if ((ka.sa.sa_flags & SA_RESTART) == 0) {
 504                                         scr->pt.r8 = ERR_CODE(EINTR);
 505                                         /* note: scr->pt.r10 is already -1 */
 506                                         break;
 507                                 }
 508                               case ERESTARTNOINTR:
 509                                 if (IS_IA32_PROCESS(&scr->pt)) {
 510                                         scr->pt.r8 = scr->pt.r1;
 511                                         scr->pt.cr_iip -= 2;
 512                                 } else
 513                                         ia64_decrement_ip(&scr->pt);
 514                                 restart = 0; /* don't restart twice if handle_signal() fails... */
 515                         }
 516                 }
 517
 518                 /*
 519                  * Whee!  Actually deliver the signal.  If the delivery failed, we need to
 520                  * continue to iterate in this loop so we can deliver the SIGSEGV...
 521                  */
 522                 if (handle_signal(signr, &ka, &info, oldset, scr)) {
 523                         /* a signal was successfully delivered; the saved
 524                          * sigmask will have been stored in the signal frame,
 525                          * and will be restored by sigreturn, so we can simply
 526                          * clear the TIF_RESTORE_SIGMASK flag */
 527                         if (test_thread_flag(TIF_RESTORE_SIGMASK))
 528                                 clear_thread_flag(TIF_RESTORE_SIGMASK);
 529                         return;
 530                 }
 531         }
 532
 533         /* Did we come from a system call? */
 534         if (restart) {
 535                 /* Restart the system call - no handlers present */
 536                 if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR
 537                     || errno == ERESTART_RESTARTBLOCK)
 538                 {
 539                         if (IS_IA32_PROCESS(&scr->pt)) {
 540                                 scr->pt.r8 = scr->pt.r1;
 541                                 scr->pt.cr_iip -= 2;
 542                                 if (errno == ERESTART_RESTARTBLOCK)
 543                                         scr->pt.r8 = 0; /* x86 version of __NR_restart_syscall */
 544                         } else {
 545                                 /*
 546                                  * Note: the syscall number is in r15 which is saved in
 547                                  * pt_regs so all we need to do here is adjust ip so that
 548                                  * the "break" instruction gets re-executed.
 549                                  */
 550                                 ia64_decrement_ip(&scr->pt);
 551                                 if (errno == ERESTART_RESTARTBLOCK)
 552                                         scr->pt.r15 = __NR_restart_syscall;
 553                         }
 554                 }
 555         }
 556
 557         /* if there's no signal to deliver, we just put the saved sigmask
 558          * back */
 559         if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
 560                 clear_thread_flag(TIF_RESTORE_SIGMASK);
 561                 sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 562         }
 563 }