arch/mips/au1000/pb1200/irqmap.c

   1 /*
   2  * BRIEF MODULE DESCRIPTION
   3  *      Au1xxx irq map table
   4  *
   5  *  This program is free software; you can redistribute  it and/or modify it
   6  *  under  the terms of  the GNU General  Public License as published by the
   7  *  Free Software Foundation;  either version 2 of the  License, or (at your
   8  *  option) any later version.
   9  *
  10  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  11  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  12  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  13  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  14  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  15  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  16  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  17  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  18  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  19  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  20  *
  21  *  You should have received a copy of the  GNU General Public License along
  22  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  23  *  675 Mass Ave, Cambridge, MA 02139, USA.
  24  */
  25 #include <linux/errno.h>
  26 #include <linux/init.h>
  27 #include <linux/irq.h>
  28 #include <linux/kernel_stat.h>
  29 #include <linux/module.h>
  30 #include <linux/signal.h>
  31 #include <linux/sched.h>
  32 #include <linux/types.h>
  33 #include <linux/interrupt.h>
  34 #include <linux/ioport.h>
  35 #include <linux/timex.h>
  36 #include <linux/slab.h>
  37 #include <linux/random.h>
  38 #include <linux/delay.h>
  39
  40 #include <asm/bitops.h>
  41 #include <asm/bootinfo.h>
  42 #include <asm/io.h>
  43 #include <asm/mipsregs.h>
  44 #include <asm/system.h>
  45 #include <asm/mach-au1x00/au1000.h>
  46
  47 #ifdef CONFIG_MIPS_PB1200
  48 #include <asm/mach-pb1x00/pb1200.h>
  49 #endif
  50
  51 #ifdef CONFIG_MIPS_DB1200
  52 #include <asm/mach-db1x00/db1200.h>
  53 #define PB1200_INT_BEGIN DB1200_INT_BEGIN
  54 #define PB1200_INT_END DB1200_INT_END
  55 #endif
  56
  57 au1xxx_irq_map_t au1xxx_irq_map[] = {
  58         { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
  59 };
  60
  61 int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
  62
  63 /*
  64  *      Support for External interrupts on the PbAu1200 Development platform.
  65  */
  66 static volatile int pb1200_cascade_en=0;
  67
  68 void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
  69 {
  70         unsigned short bisr = bcsr->int_status;
  71         int extirq_nr = 0;
  72
  73         /* Clear all the edge interrupts. This has no effect on level */
  74         bcsr->int_status = bisr;
  75         for( ; bisr; bisr &= (bisr-1) )
  76         {
  77                 extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
  78                 /* Ack and dispatch IRQ */
  79                 do_IRQ(extirq_nr,regs);
  80         }
  81 }
  82
  83 inline void pb1200_enable_irq(unsigned int irq_nr)
  84 {
  85         bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
  86         bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
  87 }
  88
  89 inline void pb1200_disable_irq(unsigned int irq_nr)
  90 {
  91         bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
  92         bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
  93 }
  94
  95 static unsigned int pb1200_startup_irq( unsigned int irq_nr )
  96 {
  97         if (++pb1200_cascade_en == 1)
  98         {
  99                 request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
 100                         0, "Pb1200 Cascade", &pb1200_cascade_handler );
 101 #ifdef CONFIG_MIPS_PB1200
 102     /* We have a problem with CPLD rev3. Enable a workaround */
 103         if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
 104         {
 105                 printk("\nWARNING!!!\n");
 106                 printk("\nWARNING!!!\n");
 107                 printk("\nWARNING!!!\n");
 108                 printk("\nWARNING!!!\n");
 109                 printk("\nWARNING!!!\n");
 110                 printk("\nWARNING!!!\n");
 111                 printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
 112                 printk("updated to latest revision. This software will not\n");
 113                 printk("work on anything less than CPLD rev4\n");
 114                 printk("\nWARNING!!!\n");
 115                 printk("\nWARNING!!!\n");
 116                 printk("\nWARNING!!!\n");
 117                 printk("\nWARNING!!!\n");
 118                 printk("\nWARNING!!!\n");
 119                 printk("\nWARNING!!!\n");
 120                 while(1);
 121         }
 122 #endif
 123         }
 124         pb1200_enable_irq(irq_nr);
 125         return 0;
 126 }
 127
 128 static void pb1200_shutdown_irq( unsigned int irq_nr )
 129 {
 130         pb1200_disable_irq(irq_nr);
 131         if (--pb1200_cascade_en == 0)
 132         {
 133                 free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
 134         }
 135         return;
 136 }
 137
 138 static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
 139 {
 140         pb1200_disable_irq( irq_nr );
 141 }
 142
 143 static void pb1200_end_irq(unsigned int irq_nr)
 144 {
 145         if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
 146                 pb1200_enable_irq(irq_nr);
 147         }
 148 }
 149
 150 static struct hw_interrupt_type external_irq_type =
 151 {
 152 #ifdef CONFIG_MIPS_PB1200
 153         "Pb1200 Ext",
 154 #endif
 155 #ifdef CONFIG_MIPS_DB1200
 156         "Db1200 Ext",
 157 #endif
 158         pb1200_startup_irq,
 159         pb1200_shutdown_irq,
 160         pb1200_enable_irq,
 161         pb1200_disable_irq,
 162         pb1200_mask_and_ack_irq,
 163         pb1200_end_irq,
 164         NULL
 165 };
 166
 167 void _board_init_irq(void)
 168 {
 169         int irq_nr;
 170
 171         for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
 172         {
 173                 irq_desc[irq_nr].handler = &external_irq_type;
 174                 pb1200_disable_irq(irq_nr);
 175         }
 176
 177         /* GPIO_7 can not be hooked here, so it is hooked upon first
 178         request of any source attached to the cascade */
 179 }
 180