6 * Reorganisation and extension of the driver.
7 * Original copyright follows (also see the end of this file).
8 * See wavelan.p.h for details.
12 * AT&T GIS (nee NCR) WaveLAN card:
13 * An Ethernet-like radio transceiver
14 * controlled by an Intel 82586 coprocessor.
17 #include "wavelan.p.h" /* Private header */
19 /************************* MISC SUBROUTINES **************************/
21 * Subroutines which won't fit in one of the following category
22 * (WaveLAN modem or i82586)
25 /*------------------------------------------------------------------*/
27 * Translate irq number to PSA irq parameter
29 static u8
wv_irq_to_psa(int irq
)
31 if (irq
< 0 || irq
>= ARRAY_SIZE(irqvals
))
37 /*------------------------------------------------------------------*/
39 * Translate PSA irq parameter to irq number
41 static int __init
wv_psa_to_irq(u8 irqval
)
45 for (irq
= 0; irq
< ARRAY_SIZE(irqvals
); irq
++)
46 if (irqvals
[irq
] == irqval
)
52 /********************* HOST ADAPTER SUBROUTINES *********************/
54 * Useful subroutines to manage the WaveLAN ISA interface
56 * One major difference with the PCMCIA hardware (except the port mapping)
57 * is that we have to keep the state of the Host Control Register
58 * because of the interrupt enable & bus size flags.
61 /*------------------------------------------------------------------*/
63 * Read from card's Host Adaptor Status Register.
65 static inline u16
hasr_read(unsigned long ioaddr
)
67 return (inw(HASR(ioaddr
)));
70 /*------------------------------------------------------------------*/
72 * Write to card's Host Adapter Command Register.
74 static inline void hacr_write(unsigned long ioaddr
, u16 hacr
)
76 outw(hacr
, HACR(ioaddr
));
79 /*------------------------------------------------------------------*/
81 * Write to card's Host Adapter Command Register. Include a delay for
82 * those times when it is needed.
84 static void hacr_write_slow(unsigned long ioaddr
, u16 hacr
)
86 hacr_write(ioaddr
, hacr
);
87 /* delay might only be needed sometimes */
89 } /* hacr_write_slow */
91 /*------------------------------------------------------------------*/
93 * Set the channel attention bit.
95 static inline void set_chan_attn(unsigned long ioaddr
, u16 hacr
)
97 hacr_write(ioaddr
, hacr
| HACR_CA
);
100 /*------------------------------------------------------------------*/
102 * Reset, and then set host adaptor into default mode.
104 static inline void wv_hacr_reset(unsigned long ioaddr
)
106 hacr_write_slow(ioaddr
, HACR_RESET
);
107 hacr_write(ioaddr
, HACR_DEFAULT
);
108 } /* wv_hacr_reset */
110 /*------------------------------------------------------------------*/
112 * Set the I/O transfer over the ISA bus to 8-bit mode
114 static inline void wv_16_off(unsigned long ioaddr
, u16 hacr
)
116 hacr
&= ~HACR_16BITS
;
117 hacr_write(ioaddr
, hacr
);
120 /*------------------------------------------------------------------*/
122 * Set the I/O transfer over the ISA bus to 8-bit mode
124 static inline void wv_16_on(unsigned long ioaddr
, u16 hacr
)
127 hacr_write(ioaddr
, hacr
);
130 /*------------------------------------------------------------------*/
132 * Disable interrupts on the WaveLAN hardware.
133 * (called by wv_82586_stop())
135 static inline void wv_ints_off(struct net_device
* dev
)
137 net_local
*lp
= (net_local
*) dev
->priv
;
138 unsigned long ioaddr
= dev
->base_addr
;
140 lp
->hacr
&= ~HACR_INTRON
;
141 hacr_write(ioaddr
, lp
->hacr
);
144 /*------------------------------------------------------------------*/
146 * Enable interrupts on the WaveLAN hardware.
147 * (called by wv_hw_reset())
149 static inline void wv_ints_on(struct net_device
* dev
)
151 net_local
*lp
= (net_local
*) dev
->priv
;
152 unsigned long ioaddr
= dev
->base_addr
;
154 lp
->hacr
|= HACR_INTRON
;
155 hacr_write(ioaddr
, lp
->hacr
);
158 /******************* MODEM MANAGEMENT SUBROUTINES *******************/
160 * Useful subroutines to manage the modem of the WaveLAN
163 /*------------------------------------------------------------------*/
165 * Read the Parameter Storage Area from the WaveLAN card's memory
168 * Read bytes from the PSA.
170 static void psa_read(unsigned long ioaddr
, u16 hacr
, int o
, /* offset in PSA */
171 u8
* b
, /* buffer to fill */
174 wv_16_off(ioaddr
, hacr
);
177 outw(o
, PIOR2(ioaddr
));
179 *b
++ = inb(PIOP2(ioaddr
));
182 wv_16_on(ioaddr
, hacr
);
185 /*------------------------------------------------------------------*/
187 * Write the Parameter Storage Area to the WaveLAN card's memory.
189 static void psa_write(unsigned long ioaddr
, u16 hacr
, int o
, /* Offset in PSA */
190 u8
* b
, /* Buffer in memory */
192 { /* Length of buffer */
195 wv_16_off(ioaddr
, hacr
);
198 outw(o
, PIOR2(ioaddr
));
201 outb(*b
, PIOP2(ioaddr
));
204 /* Wait for the memory to finish its write cycle */
206 while ((count
++ < 100) &&
207 (hasr_read(ioaddr
) & HASR_PSA_BUSY
)) mdelay(1);
210 wv_16_on(ioaddr
, hacr
);
214 /*------------------------------------------------------------------*/
216 * Calculate the PSA CRC
217 * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
218 * NOTE: By specifying a length including the CRC position the
219 * returned value should be zero. (i.e. a correct checksum in the PSA)
221 * The Windows drivers don't use the CRC, but the AP and the PtP tool
224 static u16
psa_crc(u8
* psa
, /* The PSA */
226 { /* Number of short for CRC */
227 int byte_cnt
; /* Loop on the PSA */
228 u16 crc_bytes
= 0; /* Data in the PSA */
229 int bit_cnt
; /* Loop on the bits of the short */
231 for (byte_cnt
= 0; byte_cnt
< size
; byte_cnt
++) {
232 crc_bytes
^= psa
[byte_cnt
]; /* Its an xor */
234 for (bit_cnt
= 1; bit_cnt
< 9; bit_cnt
++) {
235 if (crc_bytes
& 0x0001)
236 crc_bytes
= (crc_bytes
>> 1) ^ 0xA001;
244 #endif /* SET_PSA_CRC */
246 /*------------------------------------------------------------------*/
248 * update the checksum field in the Wavelan's PSA
250 static void update_psa_checksum(struct net_device
* dev
, unsigned long ioaddr
, u16 hacr
)
256 /* read the parameter storage area */
257 psa_read(ioaddr
, hacr
, 0, (unsigned char *) &psa
, sizeof(psa
));
259 /* update the checksum */
260 crc
= psa_crc((unsigned char *) &psa
,
261 sizeof(psa
) - sizeof(psa
.psa_crc
[0]) -
262 sizeof(psa
.psa_crc
[1])
263 - sizeof(psa
.psa_crc_status
));
265 psa
.psa_crc
[0] = crc
& 0xFF;
266 psa
.psa_crc
[1] = (crc
& 0xFF00) >> 8;
269 psa_write(ioaddr
, hacr
, (char *) &psa
.psa_crc
- (char *) &psa
,
270 (unsigned char *) &psa
.psa_crc
, 2);
272 #ifdef DEBUG_IOCTL_INFO
273 printk(KERN_DEBUG
"%s: update_psa_checksum(): crc = 0x%02x%02x\n",
274 dev
->name
, psa
.psa_crc
[0], psa
.psa_crc
[1]);
276 /* Check again (luxury !) */
277 crc
= psa_crc((unsigned char *) &psa
,
278 sizeof(psa
) - sizeof(psa
.psa_crc_status
));
282 "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n",
284 #endif /* DEBUG_IOCTL_INFO */
285 #endif /* SET_PSA_CRC */
286 } /* update_psa_checksum */
288 /*------------------------------------------------------------------*/
290 * Write 1 byte to the MMC.
292 static void mmc_out(unsigned long ioaddr
, u16 o
, u8 d
)
296 /* Wait for MMC to go idle */
297 while ((count
++ < 100) && (inw(HASR(ioaddr
)) & HASR_MMC_BUSY
))
300 outw((u16
) (((u16
) d
<< 8) | (o
<< 1) | 1), MMCR(ioaddr
));
303 /*------------------------------------------------------------------*/
305 * Routine to write bytes to the Modem Management Controller.
306 * We start at the end because it is the way it should be!
308 static void mmc_write(unsigned long ioaddr
, u8 o
, u8
* b
, int n
)
314 mmc_out(ioaddr
, --o
, *(--b
));
317 /*------------------------------------------------------------------*/
319 * Read a byte from the MMC.
320 * Optimised version for 1 byte, avoid using memory.
322 static u8
mmc_in(unsigned long ioaddr
, u16 o
)
326 while ((count
++ < 100) && (inw(HASR(ioaddr
)) & HASR_MMC_BUSY
))
328 outw(o
<< 1, MMCR(ioaddr
));
330 while ((count
++ < 100) && (inw(HASR(ioaddr
)) & HASR_MMC_BUSY
))
332 return (u8
) (inw(MMCR(ioaddr
)) >> 8);
335 /*------------------------------------------------------------------*/
337 * Routine to read bytes from the Modem Management Controller.
338 * The implementation is complicated by a lack of address lines,
339 * which prevents decoding of the low-order bit.
340 * (code has just been moved in the above function)
341 * We start at the end because it is the way it should be!
343 static inline void mmc_read(unsigned long ioaddr
, u8 o
, u8
* b
, int n
)
349 *(--b
) = mmc_in(ioaddr
, --o
);
352 /*------------------------------------------------------------------*/
354 * Get the type of encryption available.
356 static inline int mmc_encr(unsigned long ioaddr
)
357 { /* I/O port of the card */
360 temp
= mmc_in(ioaddr
, mmroff(0, mmr_des_avail
));
361 if ((temp
!= MMR_DES_AVAIL_DES
) && (temp
!= MMR_DES_AVAIL_AES
))
367 /*------------------------------------------------------------------*/
369 * Wait for the frequency EEPROM to complete a command.
370 * I hope this one will be optimally inlined.
372 static inline void fee_wait(unsigned long ioaddr
, /* I/O port of the card */
373 int delay
, /* Base delay to wait for */
375 { /* Number of time to wait */
376 int count
= 0; /* Wait only a limited time */
378 while ((count
++ < number
) &&
379 (mmc_in(ioaddr
, mmroff(0, mmr_fee_status
)) &
380 MMR_FEE_STATUS_BUSY
)) udelay(delay
);
383 /*------------------------------------------------------------------*/
385 * Read bytes from the Frequency EEPROM (frequency select cards).
387 static void fee_read(unsigned long ioaddr
, /* I/O port of the card */
388 u16 o
, /* destination offset */
389 u16
* b
, /* data buffer */
391 { /* number of registers */
392 b
+= n
; /* Position at the end of the area */
394 /* Write the address */
395 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), o
+ n
- 1);
397 /* Loop on all buffer */
399 /* Write the read command */
400 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
),
403 /* Wait until EEPROM is ready (should be quick). */
404 fee_wait(ioaddr
, 10, 100);
406 /* Read the value. */
407 *--b
= ((mmc_in(ioaddr
, mmroff(0, mmr_fee_data_h
)) << 8) |
408 mmc_in(ioaddr
, mmroff(0, mmr_fee_data_l
)));
413 /*------------------------------------------------------------------*/
415 * Write bytes from the Frequency EEPROM (frequency select cards).
416 * This is a bit complicated, because the frequency EEPROM has to
417 * be unprotected and the write enabled.
420 static void fee_write(unsigned long ioaddr
, /* I/O port of the card */
421 u16 o
, /* destination offset */
422 u16
* b
, /* data buffer */
424 { /* number of registers */
425 b
+= n
; /* Position at the end of the area. */
427 #ifdef EEPROM_IS_PROTECTED /* disabled */
428 #ifdef DOESNT_SEEM_TO_WORK /* disabled */
429 /* Ask to read the protected register */
430 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
), MMW_FEE_CTRL_PRREAD
);
432 fee_wait(ioaddr
, 10, 100);
434 /* Read the protected register. */
435 printk("Protected 2: %02X-%02X\n",
436 mmc_in(ioaddr
, mmroff(0, mmr_fee_data_h
)),
437 mmc_in(ioaddr
, mmroff(0, mmr_fee_data_l
)));
438 #endif /* DOESNT_SEEM_TO_WORK */
440 /* Enable protected register. */
441 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), MMW_FEE_ADDR_EN
);
442 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
), MMW_FEE_CTRL_PREN
);
444 fee_wait(ioaddr
, 10, 100);
446 /* Unprotect area. */
447 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), o
+ n
);
448 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
), MMW_FEE_CTRL_PRWRITE
);
449 #ifdef DOESNT_SEEM_TO_WORK /* disabled */
451 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
), MMW_FEE_CTRL_PRCLEAR
);
452 #endif /* DOESNT_SEEM_TO_WORK */
454 fee_wait(ioaddr
, 10, 100);
455 #endif /* EEPROM_IS_PROTECTED */
458 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), MMW_FEE_ADDR_EN
);
459 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
), MMW_FEE_CTRL_WREN
);
461 fee_wait(ioaddr
, 10, 100);
463 /* Write the EEPROM address. */
464 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), o
+ n
- 1);
466 /* Loop on all buffer */
468 /* Write the value. */
469 mmc_out(ioaddr
, mmwoff(0, mmw_fee_data_h
), (*--b
) >> 8);
470 mmc_out(ioaddr
, mmwoff(0, mmw_fee_data_l
), *b
& 0xFF);
472 /* Write the write command. */
473 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
),
476 /* WaveLAN documentation says to wait at least 10 ms for EEBUSY = 0 */
478 fee_wait(ioaddr
, 10, 100);
482 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), MMW_FEE_ADDR_DS
);
483 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
), MMW_FEE_CTRL_WDS
);
485 fee_wait(ioaddr
, 10, 100);
487 #ifdef EEPROM_IS_PROTECTED /* disabled */
488 /* Reprotect EEPROM. */
489 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), 0x00);
490 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
), MMW_FEE_CTRL_PRWRITE
);
492 fee_wait(ioaddr
, 10, 100);
493 #endif /* EEPROM_IS_PROTECTED */
496 /************************ I82586 SUBROUTINES *************************/
498 * Useful subroutines to manage the Ethernet controller
501 /*------------------------------------------------------------------*/
503 * Read bytes from the on-board RAM.
504 * Why does inlining this function make it fail?
506 static /*inline */ void obram_read(unsigned long ioaddr
,
507 u16 o
, u8
* b
, int n
)
509 outw(o
, PIOR1(ioaddr
));
510 insw(PIOP1(ioaddr
), (unsigned short *) b
, (n
+ 1) >> 1);
513 /*------------------------------------------------------------------*/
515 * Write bytes to the on-board RAM.
517 static inline void obram_write(unsigned long ioaddr
, u16 o
, u8
* b
, int n
)
519 outw(o
, PIOR1(ioaddr
));
520 outsw(PIOP1(ioaddr
), (unsigned short *) b
, (n
+ 1) >> 1);
523 /*------------------------------------------------------------------*/
525 * Acknowledge the reading of the status issued by the i82586.
527 static void wv_ack(struct net_device
* dev
)
529 net_local
*lp
= (net_local
*) dev
->priv
;
530 unsigned long ioaddr
= dev
->base_addr
;
534 obram_read(ioaddr
, scboff(OFFSET_SCB
, scb_status
),
535 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
536 scb_cs
&= SCB_ST_INT
;
541 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
542 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
544 set_chan_attn(ioaddr
, lp
->hacr
);
546 for (i
= 1000; i
> 0; i
--) {
547 obram_read(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
548 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
556 #ifdef DEBUG_CONFIG_ERROR
559 "%s: wv_ack(): board not accepting command.\n",
564 /*------------------------------------------------------------------*/
566 * Set channel attention bit and busy wait until command has
567 * completed, then acknowledge completion of the command.
569 static int wv_synchronous_cmd(struct net_device
* dev
, const char *str
)
571 net_local
*lp
= (net_local
*) dev
->priv
;
572 unsigned long ioaddr
= dev
->base_addr
;
577 scb_cmd
= SCB_CMD_CUC
& SCB_CMD_CUC_GO
;
578 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
579 (unsigned char *) &scb_cmd
, sizeof(scb_cmd
));
581 set_chan_attn(ioaddr
, lp
->hacr
);
583 for (i
= 1000; i
> 0; i
--) {
584 obram_read(ioaddr
, OFFSET_CU
, (unsigned char *) &cb
,
586 if (cb
.ac_status
& AC_SFLD_C
)
593 if (i
<= 0 || !(cb
.ac_status
& AC_SFLD_OK
)) {
594 #ifdef DEBUG_CONFIG_ERROR
595 printk(KERN_INFO
"%s: %s failed; status = 0x%x\n",
596 dev
->name
, str
, cb
.ac_status
);
598 #ifdef DEBUG_I82586_SHOW
610 /*------------------------------------------------------------------*/
612 * Configuration commands completion interrupt.
613 * Check if done, and if OK.
616 wv_config_complete(struct net_device
* dev
, unsigned long ioaddr
, net_local
* lp
)
618 unsigned short mcs_addr
;
619 unsigned short status
;
622 #ifdef DEBUG_INTERRUPT_TRACE
623 printk(KERN_DEBUG
"%s: ->wv_config_complete()\n", dev
->name
);
626 mcs_addr
= lp
->tx_first_in_use
+ sizeof(ac_tx_t
) + sizeof(ac_nop_t
)
627 + sizeof(tbd_t
) + sizeof(ac_cfg_t
) + sizeof(ac_ias_t
);
629 /* Read the status of the last command (set mc list). */
630 obram_read(ioaddr
, acoff(mcs_addr
, ac_status
),
631 (unsigned char *) &status
, sizeof(status
));
633 /* If not completed -> exit */
634 if ((status
& AC_SFLD_C
) == 0)
635 ret
= 0; /* Not ready to be scrapped */
637 #ifdef DEBUG_CONFIG_ERROR
638 unsigned short cfg_addr
;
639 unsigned short ias_addr
;
641 /* Check mc_config command */
642 if ((status
& AC_SFLD_OK
) != AC_SFLD_OK
)
644 "%s: wv_config_complete(): set_multicast_address failed; status = 0x%x\n",
647 /* check ia-config command */
648 ias_addr
= mcs_addr
- sizeof(ac_ias_t
);
649 obram_read(ioaddr
, acoff(ias_addr
, ac_status
),
650 (unsigned char *) &status
, sizeof(status
));
651 if ((status
& AC_SFLD_OK
) != AC_SFLD_OK
)
653 "%s: wv_config_complete(): set_MAC_address failed; status = 0x%x\n",
656 /* Check config command. */
657 cfg_addr
= ias_addr
- sizeof(ac_cfg_t
);
658 obram_read(ioaddr
, acoff(cfg_addr
, ac_status
),
659 (unsigned char *) &status
, sizeof(status
));
660 if ((status
& AC_SFLD_OK
) != AC_SFLD_OK
)
662 "%s: wv_config_complete(): configure failed; status = 0x%x\n",
664 #endif /* DEBUG_CONFIG_ERROR */
666 ret
= 1; /* Ready to be scrapped */
669 #ifdef DEBUG_INTERRUPT_TRACE
670 printk(KERN_DEBUG
"%s: <-wv_config_complete() - %d\n", dev
->name
,
676 /*------------------------------------------------------------------*/
678 * Command completion interrupt.
679 * Reclaim as many freed tx buffers as we can.
680 * (called in wavelan_interrupt()).
681 * Note : the spinlock is already grabbed for us.
683 static int wv_complete(struct net_device
* dev
, unsigned long ioaddr
, net_local
* lp
)
687 #ifdef DEBUG_INTERRUPT_TRACE
688 printk(KERN_DEBUG
"%s: ->wv_complete()\n", dev
->name
);
691 /* Loop on all the transmit buffers */
692 while (lp
->tx_first_in_use
!= I82586NULL
) {
693 unsigned short tx_status
;
695 /* Read the first transmit buffer */
696 obram_read(ioaddr
, acoff(lp
->tx_first_in_use
, ac_status
),
697 (unsigned char *) &tx_status
,
700 /* If not completed -> exit */
701 if ((tx_status
& AC_SFLD_C
) == 0)
704 /* Hack for reconfiguration */
705 if (tx_status
== 0xFFFF)
706 if (!wv_config_complete(dev
, ioaddr
, lp
))
707 break; /* Not completed */
709 /* We now remove this buffer */
714 if (lp->tx_n_in_use > 0)
715 printk("%c", "0123456789abcdefghijk"[lp->tx_n_in_use]);
718 /* Was it the last one? */
719 if (lp
->tx_n_in_use
<= 0)
720 lp
->tx_first_in_use
= I82586NULL
;
722 /* Next one in the chain */
723 lp
->tx_first_in_use
+= TXBLOCKZ
;
724 if (lp
->tx_first_in_use
>=
726 NTXBLOCKS
* TXBLOCKZ
) lp
->tx_first_in_use
-=
727 NTXBLOCKS
* TXBLOCKZ
;
730 /* Hack for reconfiguration */
731 if (tx_status
== 0xFFFF)
734 /* Now, check status of the finished command */
735 if (tx_status
& AC_SFLD_OK
) {
738 lp
->stats
.tx_packets
++;
739 ncollisions
= tx_status
& AC_SFLD_MAXCOL
;
740 lp
->stats
.collisions
+= ncollisions
;
744 "%s: wv_complete(): tx completed after %d collisions.\n",
745 dev
->name
, ncollisions
);
748 lp
->stats
.tx_errors
++;
749 if (tx_status
& AC_SFLD_S10
) {
750 lp
->stats
.tx_carrier_errors
++;
753 "%s: wv_complete(): tx error: no CS.\n",
757 if (tx_status
& AC_SFLD_S9
) {
758 lp
->stats
.tx_carrier_errors
++;
761 "%s: wv_complete(): tx error: lost CTS.\n",
765 if (tx_status
& AC_SFLD_S8
) {
766 lp
->stats
.tx_fifo_errors
++;
769 "%s: wv_complete(): tx error: slow DMA.\n",
773 if (tx_status
& AC_SFLD_S6
) {
774 lp
->stats
.tx_heartbeat_errors
++;
777 "%s: wv_complete(): tx error: heart beat.\n",
781 if (tx_status
& AC_SFLD_S5
) {
782 lp
->stats
.tx_aborted_errors
++;
785 "%s: wv_complete(): tx error: too many collisions.\n",
793 "%s: wv_complete(): tx completed, tx_status 0x%04x\n",
794 dev
->name
, tx_status
);
798 #ifdef DEBUG_INTERRUPT_INFO
800 printk(KERN_DEBUG
"%s: wv_complete(): reaped %d\n",
805 * Inform upper layers.
807 if (lp
->tx_n_in_use
< NTXBLOCKS
- 1) {
808 netif_wake_queue(dev
);
810 #ifdef DEBUG_INTERRUPT_TRACE
811 printk(KERN_DEBUG
"%s: <-wv_complete()\n", dev
->name
);
816 /*------------------------------------------------------------------*/
818 * Reconfigure the i82586, or at least ask for it.
819 * Because wv_82586_config uses a transmission buffer, we must do it
820 * when we are sure that there is one left, so we do it now
821 * or in wavelan_packet_xmit() (I can't find any better place,
822 * wavelan_interrupt is not an option), so you may experience
825 static void wv_82586_reconfig(struct net_device
* dev
)
827 net_local
*lp
= (net_local
*) dev
->priv
;
830 /* Arm the flag, will be cleard in wv_82586_config() */
831 lp
->reconfig_82586
= 1;
833 /* Check if we can do it now ! */
834 if((netif_running(dev
)) && !(netif_queue_stopped(dev
))) {
835 spin_lock_irqsave(&lp
->spinlock
, flags
);
837 wv_82586_config(dev
);
838 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
841 #ifdef DEBUG_CONFIG_INFO
843 "%s: wv_82586_reconfig(): delayed (state = %lX)\n",
844 dev
->name
, dev
->state
);
849 /********************* DEBUG & INFO SUBROUTINES *********************/
851 * This routine is used in the code to show information for debugging.
852 * Most of the time, it dumps the contents of hardware structures.
855 #ifdef DEBUG_PSA_SHOW
856 /*------------------------------------------------------------------*/
858 * Print the formatted contents of the Parameter Storage Area.
860 static void wv_psa_show(psa_t
* p
)
862 DECLARE_MAC_BUF(mac
);
864 printk(KERN_DEBUG
"##### WaveLAN PSA contents: #####\n");
865 printk(KERN_DEBUG
"psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
866 p
->psa_io_base_addr_1
,
867 p
->psa_io_base_addr_2
,
868 p
->psa_io_base_addr_3
, p
->psa_io_base_addr_4
);
869 printk(KERN_DEBUG
"psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
870 p
->psa_rem_boot_addr_1
,
871 p
->psa_rem_boot_addr_2
, p
->psa_rem_boot_addr_3
);
872 printk(KERN_DEBUG
"psa_holi_params: 0x%02x, ", p
->psa_holi_params
);
873 printk("psa_int_req_no: %d\n", p
->psa_int_req_no
);
874 #ifdef DEBUG_SHOW_UNUSED
875 printk(KERN_DEBUG
"psa_unused0[]: %s\n",
876 print_mac(mac
, p
->psa_unused0
));
877 #endif /* DEBUG_SHOW_UNUSED */
878 printk(KERN_DEBUG
"psa_univ_mac_addr[]: %s\n",
879 print_mac(mac
, p
->psa_univ_mac_addr
));
880 printk(KERN_DEBUG
"psa_local_mac_addr[]: %s\n",
881 print_mac(mac
, p
->psa_local_mac_addr
));
882 printk(KERN_DEBUG
"psa_univ_local_sel: %d, ",
883 p
->psa_univ_local_sel
);
884 printk("psa_comp_number: %d, ", p
->psa_comp_number
);
885 printk("psa_thr_pre_set: 0x%02x\n", p
->psa_thr_pre_set
);
886 printk(KERN_DEBUG
"psa_feature_select/decay_prm: 0x%02x, ",
887 p
->psa_feature_select
);
888 printk("psa_subband/decay_update_prm: %d\n", p
->psa_subband
);
889 printk(KERN_DEBUG
"psa_quality_thr: 0x%02x, ", p
->psa_quality_thr
);
890 printk("psa_mod_delay: 0x%02x\n", p
->psa_mod_delay
);
891 printk(KERN_DEBUG
"psa_nwid: 0x%02x%02x, ", p
->psa_nwid
[0],
893 printk("psa_nwid_select: %d\n", p
->psa_nwid_select
);
894 printk(KERN_DEBUG
"psa_encryption_select: %d, ",
895 p
->psa_encryption_select
);
897 ("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
898 p
->psa_encryption_key
[0], p
->psa_encryption_key
[1],
899 p
->psa_encryption_key
[2], p
->psa_encryption_key
[3],
900 p
->psa_encryption_key
[4], p
->psa_encryption_key
[5],
901 p
->psa_encryption_key
[6], p
->psa_encryption_key
[7]);
902 printk(KERN_DEBUG
"psa_databus_width: %d\n", p
->psa_databus_width
);
903 printk(KERN_DEBUG
"psa_call_code/auto_squelch: 0x%02x, ",
904 p
->psa_call_code
[0]);
906 ("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
907 p
->psa_call_code
[0], p
->psa_call_code
[1], p
->psa_call_code
[2],
908 p
->psa_call_code
[3], p
->psa_call_code
[4], p
->psa_call_code
[5],
909 p
->psa_call_code
[6], p
->psa_call_code
[7]);
910 #ifdef DEBUG_SHOW_UNUSED
911 printk(KERN_DEBUG
"psa_reserved[]: %02X:%02X\n",
914 #endif /* DEBUG_SHOW_UNUSED */
915 printk(KERN_DEBUG
"psa_conf_status: %d, ", p
->psa_conf_status
);
916 printk("psa_crc: 0x%02x%02x, ", p
->psa_crc
[0], p
->psa_crc
[1]);
917 printk("psa_crc_status: 0x%02x\n", p
->psa_crc_status
);
919 #endif /* DEBUG_PSA_SHOW */
921 #ifdef DEBUG_MMC_SHOW
922 /*------------------------------------------------------------------*/
924 * Print the formatted status of the Modem Management Controller.
925 * This function needs to be completed.
927 static void wv_mmc_show(struct net_device
* dev
)
929 unsigned long ioaddr
= dev
->base_addr
;
930 net_local
*lp
= (net_local
*) dev
->priv
;
934 if (hasr_read(ioaddr
) & HASR_NO_CLK
) {
936 "%s: wv_mmc_show: modem not connected\n",
942 mmc_out(ioaddr
, mmwoff(0, mmw_freeze
), 1);
943 mmc_read(ioaddr
, 0, (u8
*) & m
, sizeof(m
));
944 mmc_out(ioaddr
, mmwoff(0, mmw_freeze
), 0);
946 /* Don't forget to update statistics */
947 lp
->wstats
.discard
.nwid
+=
948 (m
.mmr_wrong_nwid_h
<< 8) | m
.mmr_wrong_nwid_l
;
950 printk(KERN_DEBUG
"##### WaveLAN modem status registers: #####\n");
951 #ifdef DEBUG_SHOW_UNUSED
953 "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
954 m
.mmr_unused0
[0], m
.mmr_unused0
[1], m
.mmr_unused0
[2],
955 m
.mmr_unused0
[3], m
.mmr_unused0
[4], m
.mmr_unused0
[5],
956 m
.mmr_unused0
[6], m
.mmr_unused0
[7]);
957 #endif /* DEBUG_SHOW_UNUSED */
958 printk(KERN_DEBUG
"Encryption algorithm: %02X - Status: %02X\n",
959 m
.mmr_des_avail
, m
.mmr_des_status
);
960 #ifdef DEBUG_SHOW_UNUSED
961 printk(KERN_DEBUG
"mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
964 m
.mmr_unused1
[2], m
.mmr_unused1
[3], m
.mmr_unused1
[4]);
965 #endif /* DEBUG_SHOW_UNUSED */
966 printk(KERN_DEBUG
"dce_status: 0x%x [%s%s%s%s]\n",
969 mmr_dce_status
& MMR_DCE_STATUS_RX_BUSY
) ?
970 "energy detected," : "",
972 mmr_dce_status
& MMR_DCE_STATUS_LOOPT_IND
) ?
973 "loop test indicated," : "",
975 mmr_dce_status
& MMR_DCE_STATUS_TX_BUSY
) ?
976 "transmitter on," : "",
978 mmr_dce_status
& MMR_DCE_STATUS_JBR_EXPIRED
) ?
979 "jabber timer expired," : "");
980 printk(KERN_DEBUG
"Dsp ID: %02X\n", m
.mmr_dsp_id
);
981 #ifdef DEBUG_SHOW_UNUSED
982 printk(KERN_DEBUG
"mmc_unused2[]: %02X:%02X\n",
983 m
.mmr_unused2
[0], m
.mmr_unused2
[1]);
984 #endif /* DEBUG_SHOW_UNUSED */
985 printk(KERN_DEBUG
"# correct_nwid: %d, # wrong_nwid: %d\n",
986 (m
.mmr_correct_nwid_h
<< 8) | m
.mmr_correct_nwid_l
,
987 (m
.mmr_wrong_nwid_h
<< 8) | m
.mmr_wrong_nwid_l
);
988 printk(KERN_DEBUG
"thr_pre_set: 0x%x [current signal %s]\n",
989 m
.mmr_thr_pre_set
& MMR_THR_PRE_SET
,
991 mmr_thr_pre_set
& MMR_THR_PRE_SET_CUR
) ? "above" :
993 printk(KERN_DEBUG
"signal_lvl: %d [%s], ",
994 m
.mmr_signal_lvl
& MMR_SIGNAL_LVL
,
996 mmr_signal_lvl
& MMR_SIGNAL_LVL_VALID
) ? "new msg" :
998 printk("silence_lvl: %d [%s], ",
999 m
.mmr_silence_lvl
& MMR_SILENCE_LVL
,
1001 mmr_silence_lvl
& MMR_SILENCE_LVL_VALID
) ? "update done" :
1003 printk("sgnl_qual: 0x%x [%s]\n", m
.mmr_sgnl_qual
& MMR_SGNL_QUAL
,
1005 mmr_sgnl_qual
& MMR_SGNL_QUAL_ANT
) ? "Antenna 1" :
1007 #ifdef DEBUG_SHOW_UNUSED
1008 printk(KERN_DEBUG
"netw_id_l: %x\n", m
.mmr_netw_id_l
);
1009 #endif /* DEBUG_SHOW_UNUSED */
1011 #endif /* DEBUG_MMC_SHOW */
1013 #ifdef DEBUG_I82586_SHOW
1014 /*------------------------------------------------------------------*/
1016 * Print the last block of the i82586 memory.
1018 static void wv_scb_show(unsigned long ioaddr
)
1022 obram_read(ioaddr
, OFFSET_SCB
, (unsigned char *) &scb
,
1025 printk(KERN_DEBUG
"##### WaveLAN system control block: #####\n");
1027 printk(KERN_DEBUG
"status: ");
1028 printk("stat 0x%x[%s%s%s%s] ",
1030 scb_status
& (SCB_ST_CX
| SCB_ST_FR
| SCB_ST_CNA
|
1033 scb_status
& SCB_ST_CX
) ? "command completion interrupt," :
1034 "", (scb
.scb_status
& SCB_ST_FR
) ? "frame received," : "",
1036 scb_status
& SCB_ST_CNA
) ? "command unit not active," : "",
1038 scb_status
& SCB_ST_RNR
) ? "receiving unit not ready," :
1040 printk("cus 0x%x[%s%s%s] ", (scb
.scb_status
& SCB_ST_CUS
) >> 8,
1041 ((scb
.scb_status
& SCB_ST_CUS
) ==
1042 SCB_ST_CUS_IDLE
) ? "idle" : "",
1043 ((scb
.scb_status
& SCB_ST_CUS
) ==
1044 SCB_ST_CUS_SUSP
) ? "suspended" : "",
1045 ((scb
.scb_status
& SCB_ST_CUS
) ==
1046 SCB_ST_CUS_ACTV
) ? "active" : "");
1047 printk("rus 0x%x[%s%s%s%s]\n", (scb
.scb_status
& SCB_ST_RUS
) >> 4,
1048 ((scb
.scb_status
& SCB_ST_RUS
) ==
1049 SCB_ST_RUS_IDLE
) ? "idle" : "",
1050 ((scb
.scb_status
& SCB_ST_RUS
) ==
1051 SCB_ST_RUS_SUSP
) ? "suspended" : "",
1052 ((scb
.scb_status
& SCB_ST_RUS
) ==
1053 SCB_ST_RUS_NRES
) ? "no resources" : "",
1054 ((scb
.scb_status
& SCB_ST_RUS
) ==
1055 SCB_ST_RUS_RDY
) ? "ready" : "");
1057 printk(KERN_DEBUG
"command: ");
1058 printk("ack 0x%x[%s%s%s%s] ",
1060 scb_command
& (SCB_CMD_ACK_CX
| SCB_CMD_ACK_FR
|
1061 SCB_CMD_ACK_CNA
| SCB_CMD_ACK_RNR
)) >> 12,
1063 scb_command
& SCB_CMD_ACK_CX
) ? "ack cmd completion," : "",
1065 scb_command
& SCB_CMD_ACK_FR
) ? "ack frame received," : "",
1067 scb_command
& SCB_CMD_ACK_CNA
) ? "ack CU not active," : "",
1069 scb_command
& SCB_CMD_ACK_RNR
) ? "ack RU not ready," : "");
1070 printk("cuc 0x%x[%s%s%s%s%s] ",
1071 (scb
.scb_command
& SCB_CMD_CUC
) >> 8,
1072 ((scb
.scb_command
& SCB_CMD_CUC
) ==
1073 SCB_CMD_CUC_NOP
) ? "nop" : "",
1074 ((scb
.scb_command
& SCB_CMD_CUC
) ==
1075 SCB_CMD_CUC_GO
) ? "start cbl_offset" : "",
1076 ((scb
.scb_command
& SCB_CMD_CUC
) ==
1077 SCB_CMD_CUC_RES
) ? "resume execution" : "",
1078 ((scb
.scb_command
& SCB_CMD_CUC
) ==
1079 SCB_CMD_CUC_SUS
) ? "suspend execution" : "",
1080 ((scb
.scb_command
& SCB_CMD_CUC
) ==
1081 SCB_CMD_CUC_ABT
) ? "abort execution" : "");
1082 printk("ruc 0x%x[%s%s%s%s%s]\n",
1083 (scb
.scb_command
& SCB_CMD_RUC
) >> 4,
1084 ((scb
.scb_command
& SCB_CMD_RUC
) ==
1085 SCB_CMD_RUC_NOP
) ? "nop" : "",
1086 ((scb
.scb_command
& SCB_CMD_RUC
) ==
1087 SCB_CMD_RUC_GO
) ? "start rfa_offset" : "",
1088 ((scb
.scb_command
& SCB_CMD_RUC
) ==
1089 SCB_CMD_RUC_RES
) ? "resume reception" : "",
1090 ((scb
.scb_command
& SCB_CMD_RUC
) ==
1091 SCB_CMD_RUC_SUS
) ? "suspend reception" : "",
1092 ((scb
.scb_command
& SCB_CMD_RUC
) ==
1093 SCB_CMD_RUC_ABT
) ? "abort reception" : "");
1095 printk(KERN_DEBUG
"cbl_offset 0x%x ", scb
.scb_cbl_offset
);
1096 printk("rfa_offset 0x%x\n", scb
.scb_rfa_offset
);
1098 printk(KERN_DEBUG
"crcerrs %d ", scb
.scb_crcerrs
);
1099 printk("alnerrs %d ", scb
.scb_alnerrs
);
1100 printk("rscerrs %d ", scb
.scb_rscerrs
);
1101 printk("ovrnerrs %d\n", scb
.scb_ovrnerrs
);
1104 /*------------------------------------------------------------------*/
1106 * Print the formatted status of the i82586's receive unit.
1108 static void wv_ru_show(struct net_device
* dev
)
1110 /* net_local *lp = (net_local *) dev->priv; */
1113 "##### WaveLAN i82586 receiver unit status: #####\n");
1114 printk(KERN_DEBUG
"ru:");
1116 * Not implemented yet
1121 /*------------------------------------------------------------------*/
1123 * Display info about one control block of the i82586 memory.
1125 static void wv_cu_show_one(struct net_device
* dev
, net_local
* lp
, int i
, u16 p
)
1127 unsigned long ioaddr
;
1130 ioaddr
= dev
->base_addr
;
1132 printk("%d: 0x%x:", i
, p
);
1134 obram_read(ioaddr
, p
, (unsigned char *) &actx
, sizeof(actx
));
1135 printk(" status=0x%x,", actx
.tx_h
.ac_status
);
1136 printk(" command=0x%x,", actx
.tx_h
.ac_command
);
1142 obram_read(ioaddr, actx.tx_tbd_offset, (unsigned char *)&tbd, sizeof(tbd));
1143 printk(" tbd_status=0x%x,", tbd.tbd_status);
1150 /*------------------------------------------------------------------*/
1152 * Print status of the command unit of the i82586.
1154 static void wv_cu_show(struct net_device
* dev
)
1156 net_local
*lp
= (net_local
*) dev
->priv
;
1161 "##### WaveLAN i82586 command unit status: #####\n");
1164 for (i
= 0, p
= lp
->tx_first_in_use
; i
< NTXBLOCKS
; i
++) {
1165 wv_cu_show_one(dev
, lp
, i
, p
);
1168 if (p
>= OFFSET_CU
+ NTXBLOCKS
* TXBLOCKZ
)
1169 p
-= NTXBLOCKS
* TXBLOCKZ
;
1173 #endif /* DEBUG_I82586_SHOW */
1175 #ifdef DEBUG_DEVICE_SHOW
1176 /*------------------------------------------------------------------*/
1178 * Print the formatted status of the WaveLAN PCMCIA device driver.
1180 static void wv_dev_show(struct net_device
* dev
)
1182 printk(KERN_DEBUG
"dev:");
1183 printk(" state=%lX,", dev
->state
);
1184 printk(" trans_start=%ld,", dev
->trans_start
);
1185 printk(" flags=0x%x,", dev
->flags
);
1189 /*------------------------------------------------------------------*/
1191 * Print the formatted status of the WaveLAN PCMCIA device driver's
1192 * private information.
1194 static void wv_local_show(struct net_device
* dev
)
1198 lp
= (net_local
*) dev
->priv
;
1200 printk(KERN_DEBUG
"local:");
1201 printk(" tx_n_in_use=%d,", lp
->tx_n_in_use
);
1202 printk(" hacr=0x%x,", lp
->hacr
);
1203 printk(" rx_head=0x%x,", lp
->rx_head
);
1204 printk(" rx_last=0x%x,", lp
->rx_last
);
1205 printk(" tx_first_free=0x%x,", lp
->tx_first_free
);
1206 printk(" tx_first_in_use=0x%x,", lp
->tx_first_in_use
);
1208 } /* wv_local_show */
1209 #endif /* DEBUG_DEVICE_SHOW */
1211 #if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
1212 /*------------------------------------------------------------------*/
1214 * Dump packet header (and content if necessary) on the screen
1216 static inline void wv_packet_info(u8
* p
, /* Packet to dump */
1217 int length
, /* Length of the packet */
1218 char *msg1
, /* Name of the device */
1220 { /* Name of the function */
1223 DECLARE_MAC_BUF(mac
);
1226 "%s: %s(): dest %s, length %d\n",
1227 msg1
, msg2
, print_mac(mac
, p
), length
);
1229 "%s: %s(): src %s, type 0x%02X%02X\n",
1230 msg1
, msg2
, print_mac(mac
, &p
[6]), p
[12], p
[13]);
1232 #ifdef DEBUG_PACKET_DUMP
1234 printk(KERN_DEBUG
"data=\"");
1236 if ((maxi
= length
) > DEBUG_PACKET_DUMP
)
1237 maxi
= DEBUG_PACKET_DUMP
;
1238 for (i
= 14; i
< maxi
; i
++)
1239 if (p
[i
] >= ' ' && p
[i
] <= '~')
1240 printk(" %c", p
[i
]);
1242 printk("%02X", p
[i
]);
1246 printk(KERN_DEBUG
"\n");
1247 #endif /* DEBUG_PACKET_DUMP */
1249 #endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
1251 /*------------------------------------------------------------------*/
1253 * This is the information which is displayed by the driver at startup.
1254 * There are lots of flags for configuring it to your liking.
1256 static void wv_init_info(struct net_device
* dev
)
1258 short ioaddr
= dev
->base_addr
;
1259 net_local
*lp
= (net_local
*) dev
->priv
;
1261 #ifdef DEBUG_BASIC_SHOW
1262 DECLARE_MAC_BUF(mac
);
1265 /* Read the parameter storage area */
1266 psa_read(ioaddr
, lp
->hacr
, 0, (unsigned char *) &psa
, sizeof(psa
));
1268 #ifdef DEBUG_PSA_SHOW
1271 #ifdef DEBUG_MMC_SHOW
1274 #ifdef DEBUG_I82586_SHOW
1278 #ifdef DEBUG_BASIC_SHOW
1279 /* Now, let's go for the basic stuff. */
1280 printk(KERN_NOTICE
"%s: WaveLAN at %#x, %s, IRQ %d",
1281 dev
->name
, ioaddr
, print_mac(mac
, dev
->dev_addr
), dev
->irq
);
1283 /* Print current network ID. */
1284 if (psa
.psa_nwid_select
)
1285 printk(", nwid 0x%02X-%02X", psa
.psa_nwid
[0],
1288 printk(", nwid off");
1291 if (!(mmc_in(ioaddr
, mmroff(0, mmr_fee_status
)) &
1292 (MMR_FEE_STATUS_DWLD
| MMR_FEE_STATUS_BUSY
))) {
1293 unsigned short freq
;
1295 /* Ask the EEPROM to read the frequency from the first area. */
1296 fee_read(ioaddr
, 0x00, &freq
, 1);
1298 /* Print frequency */
1299 printk(", 2.00, %ld", (freq
>> 6) + 2400L);
1306 switch (psa
.psa_comp_number
) {
1307 case PSA_COMP_PC_AT_915
:
1308 case PSA_COMP_PC_AT_2400
:
1311 case PSA_COMP_PC_MC_915
:
1312 case PSA_COMP_PC_MC_2400
:
1315 case PSA_COMP_PCMCIA_915
:
1322 switch (psa
.psa_subband
) {
1323 case PSA_SUBBAND_915
:
1326 case PSA_SUBBAND_2425
:
1329 case PSA_SUBBAND_2460
:
1332 case PSA_SUBBAND_2484
:
1335 case PSA_SUBBAND_2430_5
:
1344 #endif /* DEBUG_BASIC_SHOW */
1346 #ifdef DEBUG_VERSION_SHOW
1347 /* Print version information */
1348 printk(KERN_NOTICE
"%s", version
);
1350 } /* wv_init_info */
1352 /********************* IOCTL, STATS & RECONFIG *********************/
1354 * We found here routines that are called by Linux on different
1355 * occasions after the configuration and not for transmitting data
1356 * These may be called when the user use ifconfig, /proc/net/dev
1357 * or wireless extensions
1360 /*------------------------------------------------------------------*/
1362 * Get the current Ethernet statistics. This may be called with the
1363 * card open or closed.
1364 * Used when the user read /proc/net/dev
1366 static en_stats
*wavelan_get_stats(struct net_device
* dev
)
1368 #ifdef DEBUG_IOCTL_TRACE
1369 printk(KERN_DEBUG
"%s: <>wavelan_get_stats()\n", dev
->name
);
1372 return (&((net_local
*) dev
->priv
)->stats
);
1375 /*------------------------------------------------------------------*/
1377 * Set or clear the multicast filter for this adaptor.
1378 * num_addrs == -1 Promiscuous mode, receive all packets
1379 * num_addrs == 0 Normal mode, clear multicast list
1380 * num_addrs > 0 Multicast mode, receive normal and MC packets,
1381 * and do best-effort filtering.
1383 static void wavelan_set_multicast_list(struct net_device
* dev
)
1385 net_local
*lp
= (net_local
*) dev
->priv
;
1387 #ifdef DEBUG_IOCTL_TRACE
1388 printk(KERN_DEBUG
"%s: ->wavelan_set_multicast_list()\n",
1392 #ifdef DEBUG_IOCTL_INFO
1394 "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
1395 dev
->name
, dev
->flags
, dev
->mc_count
);
1398 /* Are we asking for promiscuous mode,
1399 * or all multicast addresses (we don't have that!)
1400 * or too many multicast addresses for the hardware filter? */
1401 if ((dev
->flags
& IFF_PROMISC
) ||
1402 (dev
->flags
& IFF_ALLMULTI
) ||
1403 (dev
->mc_count
> I82586_MAX_MULTICAST_ADDRESSES
)) {
1405 * Enable promiscuous mode: receive all packets.
1407 if (!lp
->promiscuous
) {
1408 lp
->promiscuous
= 1;
1411 wv_82586_reconfig(dev
);
1414 /* Are there multicast addresses to send? */
1415 if (dev
->mc_list
!= (struct dev_mc_list
*) NULL
) {
1417 * Disable promiscuous mode, but receive all packets
1420 #ifdef MULTICAST_AVOID
1421 if (lp
->promiscuous
|| (dev
->mc_count
!= lp
->mc_count
))
1424 lp
->promiscuous
= 0;
1425 lp
->mc_count
= dev
->mc_count
;
1427 wv_82586_reconfig(dev
);
1431 * Switch to normal mode: disable promiscuous mode and
1432 * clear the multicast list.
1434 if (lp
->promiscuous
|| lp
->mc_count
== 0) {
1435 lp
->promiscuous
= 0;
1438 wv_82586_reconfig(dev
);
1441 #ifdef DEBUG_IOCTL_TRACE
1442 printk(KERN_DEBUG
"%s: <-wavelan_set_multicast_list()\n",
1447 /*------------------------------------------------------------------*/
1449 * This function doesn't exist.
1450 * (Note : it was a nice way to test the reconfigure stuff...)
1452 #ifdef SET_MAC_ADDRESS
1453 static int wavelan_set_mac_address(struct net_device
* dev
, void *addr
)
1455 struct sockaddr
*mac
= addr
;
1457 /* Copy the address. */
1458 memcpy(dev
->dev_addr
, mac
->sa_data
, WAVELAN_ADDR_SIZE
);
1460 /* Reconfigure the beast. */
1461 wv_82586_reconfig(dev
);
1465 #endif /* SET_MAC_ADDRESS */
1468 /*------------------------------------------------------------------*/
1470 * Frequency setting (for hardware capable of it)
1471 * It's a bit complicated and you don't really want to look into it.
1472 * (called in wavelan_ioctl)
1474 static int wv_set_frequency(unsigned long ioaddr
, /* I/O port of the card */
1475 iw_freq
* frequency
)
1477 const int BAND_NUM
= 10; /* Number of bands */
1478 long freq
= 0L; /* offset to 2.4 GHz in .5 MHz */
1479 #ifdef DEBUG_IOCTL_INFO
1483 /* Setting by frequency */
1484 /* Theoretically, you may set any frequency between
1485 * the two limits with a 0.5 MHz precision. In practice,
1486 * I don't want you to have trouble with local regulations.
1488 if ((frequency
->e
== 1) &&
1489 (frequency
->m
>= (int) 2.412e8
)
1490 && (frequency
->m
<= (int) 2.487e8
)) {
1491 freq
= ((frequency
->m
/ 10000) - 24000L) / 5;
1494 /* Setting by channel (same as wfreqsel) */
1495 /* Warning: each channel is 22 MHz wide, so some of the channels
1496 * will interfere. */
1497 if ((frequency
->e
== 0) && (frequency
->m
< BAND_NUM
)) {
1498 /* Get frequency offset. */
1499 freq
= channel_bands
[frequency
->m
] >> 1;
1502 /* Verify that the frequency is allowed. */
1504 u16 table
[10]; /* Authorized frequency table */
1506 /* Read the frequency table. */
1507 fee_read(ioaddr
, 0x71, table
, 10);
1509 #ifdef DEBUG_IOCTL_INFO
1510 printk(KERN_DEBUG
"Frequency table: ");
1511 for (i
= 0; i
< 10; i
++) {
1512 printk(" %04X", table
[i
]);
1517 /* Look in the table to see whether the frequency is allowed. */
1518 if (!(table
[9 - ((freq
- 24) / 16)] &
1519 (1 << ((freq
- 24) % 16)))) return -EINVAL
; /* not allowed */
1523 /* if we get a usable frequency */
1525 unsigned short area
[16];
1526 unsigned short dac
[2];
1527 unsigned short area_verify
[16];
1528 unsigned short dac_verify
[2];
1529 /* Corresponding gain (in the power adjust value table)
1530 * See AT&T WaveLAN Data Manual, REF 407-024689/E, page 3-8
1531 * and WCIN062D.DOC, page 6.2.9. */
1532 unsigned short power_limit
[] = { 40, 80, 120, 160, 0 };
1533 int power_band
= 0; /* Selected band */
1534 unsigned short power_adjust
; /* Correct value */
1536 /* Search for the gain. */
1538 while ((freq
> power_limit
[power_band
]) &&
1539 (power_limit
[++power_band
] != 0));
1541 /* Read the first area. */
1542 fee_read(ioaddr
, 0x00, area
, 16);
1545 fee_read(ioaddr
, 0x60, dac
, 2);
1547 /* Read the new power adjust value. */
1548 fee_read(ioaddr
, 0x6B - (power_band
>> 1), &power_adjust
,
1550 if (power_band
& 0x1)
1553 power_adjust
&= 0xFF;
1555 #ifdef DEBUG_IOCTL_INFO
1556 printk(KERN_DEBUG
"WaveLAN EEPROM Area 1: ");
1557 for (i
= 0; i
< 16; i
++) {
1558 printk(" %04X", area
[i
]);
1562 printk(KERN_DEBUG
"WaveLAN EEPROM DAC: %04X %04X\n",
1566 /* Frequency offset (for info only) */
1567 area
[0] = ((freq
<< 5) & 0xFFE0) | (area
[0] & 0x1F);
1569 /* Receiver Principle main divider coefficient */
1570 area
[3] = (freq
>> 1) + 2400L - 352L;
1571 area
[2] = ((freq
& 0x1) << 4) | (area
[2] & 0xFFEF);
1573 /* Transmitter Main divider coefficient */
1574 area
[13] = (freq
>> 1) + 2400L;
1575 area
[12] = ((freq
& 0x1) << 4) | (area
[2] & 0xFFEF);
1577 /* Other parts of the area are flags, bit streams or unused. */
1579 /* Set the value in the DAC. */
1580 dac
[1] = ((power_adjust
>> 1) & 0x7F) | (dac
[1] & 0xFF80);
1581 dac
[0] = ((power_adjust
& 0x1) << 4) | (dac
[0] & 0xFFEF);
1583 /* Write the first area. */
1584 fee_write(ioaddr
, 0x00, area
, 16);
1586 /* Write the DAC. */
1587 fee_write(ioaddr
, 0x60, dac
, 2);
1589 /* We now should verify here that the writing of the EEPROM went OK. */
1591 /* Reread the first area. */
1592 fee_read(ioaddr
, 0x00, area_verify
, 16);
1594 /* Reread the DAC. */
1595 fee_read(ioaddr
, 0x60, dac_verify
, 2);
1598 if (memcmp(area
, area_verify
, 16 * 2) ||
1599 memcmp(dac
, dac_verify
, 2 * 2)) {
1600 #ifdef DEBUG_IOCTL_ERROR
1602 "WaveLAN: wv_set_frequency: unable to write new frequency to EEPROM(?).\n");
1607 /* We must download the frequency parameters to the
1608 * synthesizers (from the EEPROM - area 1)
1609 * Note: as the EEPROM is automatically decremented, we set the end
1611 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), 0x0F);
1612 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
),
1613 MMW_FEE_CTRL_READ
| MMW_FEE_CTRL_DWLD
);
1615 /* Wait until the download is finished. */
1616 fee_wait(ioaddr
, 100, 100);
1618 /* We must now download the power adjust value (gain) to
1619 * the synthesizers (from the EEPROM - area 7 - DAC). */
1620 mmc_out(ioaddr
, mmwoff(0, mmw_fee_addr
), 0x61);
1621 mmc_out(ioaddr
, mmwoff(0, mmw_fee_ctrl
),
1622 MMW_FEE_CTRL_READ
| MMW_FEE_CTRL_DWLD
);
1624 /* Wait for the download to finish. */
1625 fee_wait(ioaddr
, 100, 100);
1627 #ifdef DEBUG_IOCTL_INFO
1628 /* Verification of what we have done */
1630 printk(KERN_DEBUG
"WaveLAN EEPROM Area 1: ");
1631 for (i
= 0; i
< 16; i
++) {
1632 printk(" %04X", area_verify
[i
]);
1636 printk(KERN_DEBUG
"WaveLAN EEPROM DAC: %04X %04X\n",
1637 dac_verify
[0], dac_verify
[1]);
1642 return -EINVAL
; /* Bah, never get there... */
1645 /*------------------------------------------------------------------*/
1647 * Give the list of available frequencies.
1649 static int wv_frequency_list(unsigned long ioaddr
, /* I/O port of the card */
1650 iw_freq
* list
, /* List of frequencies to fill */
1652 { /* Maximum number of frequencies */
1653 u16 table
[10]; /* Authorized frequency table */
1654 long freq
= 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */
1655 int i
; /* index in the table */
1656 int c
= 0; /* Channel number */
1658 /* Read the frequency table. */
1659 fee_read(ioaddr
, 0x71 /* frequency table */ , table
, 10);
1661 /* Check all frequencies. */
1663 for (freq
= 0; freq
< 150; freq
++)
1664 /* Look in the table if the frequency is allowed */
1665 if (table
[9 - (freq
/ 16)] & (1 << (freq
% 16))) {
1666 /* Compute approximate channel number */
1667 while ((c
< ARRAY_SIZE(channel_bands
)) &&
1668 (((channel_bands
[c
] >> 1) - 24) < freq
))
1670 list
[i
].i
= c
; /* Set the list index */
1672 /* put in the list */
1673 list
[i
].m
= (((freq
+ 24) * 5) + 24000L) * 10000;
1684 #ifdef IW_WIRELESS_SPY
1685 /*------------------------------------------------------------------*/
1687 * Gather wireless spy statistics: for each packet, compare the source
1688 * address with our list, and if they match, get the statistics.
1689 * Sorry, but this function really needs the wireless extensions.
1691 static inline void wl_spy_gather(struct net_device
* dev
,
1692 u8
* mac
, /* MAC address */
1693 u8
* stats
) /* Statistics to gather */
1695 struct iw_quality wstats
;
1697 wstats
.qual
= stats
[2] & MMR_SGNL_QUAL
;
1698 wstats
.level
= stats
[0] & MMR_SIGNAL_LVL
;
1699 wstats
.noise
= stats
[1] & MMR_SILENCE_LVL
;
1700 wstats
.updated
= 0x7;
1702 /* Update spy records */
1703 wireless_spy_update(dev
, mac
, &wstats
);
1705 #endif /* IW_WIRELESS_SPY */
1708 /*------------------------------------------------------------------*/
1710 * This function calculates a histogram of the signal level.
1711 * As the noise is quite constant, it's like doing it on the SNR.
1712 * We have defined a set of interval (lp->his_range), and each time
1713 * the level goes in that interval, we increment the count (lp->his_sum).
1714 * With this histogram you may detect if one WaveLAN is really weak,
1715 * or you may also calculate the mean and standard deviation of the level.
1717 static inline void wl_his_gather(struct net_device
* dev
, u8
* stats
)
1718 { /* Statistics to gather */
1719 net_local
*lp
= (net_local
*) dev
->priv
;
1720 u8 level
= stats
[0] & MMR_SIGNAL_LVL
;
1723 /* Find the correct interval. */
1725 while ((i
< (lp
->his_number
- 1))
1726 && (level
>= lp
->his_range
[i
++]));
1728 /* Increment interval counter. */
1731 #endif /* HISTOGRAM */
1733 /*------------------------------------------------------------------*/
1735 * Wireless Handler : get protocol name
1737 static int wavelan_get_name(struct net_device
*dev
,
1738 struct iw_request_info
*info
,
1739 union iwreq_data
*wrqu
,
1742 strcpy(wrqu
->name
, "WaveLAN");
1746 /*------------------------------------------------------------------*/
1748 * Wireless Handler : set NWID
1750 static int wavelan_set_nwid(struct net_device
*dev
,
1751 struct iw_request_info
*info
,
1752 union iwreq_data
*wrqu
,
1755 unsigned long ioaddr
= dev
->base_addr
;
1756 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
1759 unsigned long flags
;
1762 /* Disable interrupts and save flags. */
1763 spin_lock_irqsave(&lp
->spinlock
, flags
);
1765 /* Set NWID in WaveLAN. */
1766 if (!wrqu
->nwid
.disabled
) {
1767 /* Set NWID in psa */
1768 psa
.psa_nwid
[0] = (wrqu
->nwid
.value
& 0xFF00) >> 8;
1769 psa
.psa_nwid
[1] = wrqu
->nwid
.value
& 0xFF;
1770 psa
.psa_nwid_select
= 0x01;
1771 psa_write(ioaddr
, lp
->hacr
,
1772 (char *) psa
.psa_nwid
- (char *) &psa
,
1773 (unsigned char *) psa
.psa_nwid
, 3);
1775 /* Set NWID in mmc. */
1776 m
.w
.mmw_netw_id_l
= psa
.psa_nwid
[1];
1777 m
.w
.mmw_netw_id_h
= psa
.psa_nwid
[0];
1779 (char *) &m
.w
.mmw_netw_id_l
-
1781 (unsigned char *) &m
.w
.mmw_netw_id_l
, 2);
1782 mmc_out(ioaddr
, mmwoff(0, mmw_loopt_sel
), 0x00);
1784 /* Disable NWID in the psa. */
1785 psa
.psa_nwid_select
= 0x00;
1786 psa_write(ioaddr
, lp
->hacr
,
1787 (char *) &psa
.psa_nwid_select
-
1789 (unsigned char *) &psa
.psa_nwid_select
,
1792 /* Disable NWID in the mmc (no filtering). */
1793 mmc_out(ioaddr
, mmwoff(0, mmw_loopt_sel
),
1794 MMW_LOOPT_SEL_DIS_NWID
);
1796 /* update the Wavelan checksum */
1797 update_psa_checksum(dev
, ioaddr
, lp
->hacr
);
1799 /* Enable interrupts and restore flags. */
1800 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
1805 /*------------------------------------------------------------------*/
1807 * Wireless Handler : get NWID
1809 static int wavelan_get_nwid(struct net_device
*dev
,
1810 struct iw_request_info
*info
,
1811 union iwreq_data
*wrqu
,
1814 unsigned long ioaddr
= dev
->base_addr
;
1815 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
1817 unsigned long flags
;
1820 /* Disable interrupts and save flags. */
1821 spin_lock_irqsave(&lp
->spinlock
, flags
);
1823 /* Read the NWID. */
1824 psa_read(ioaddr
, lp
->hacr
,
1825 (char *) psa
.psa_nwid
- (char *) &psa
,
1826 (unsigned char *) psa
.psa_nwid
, 3);
1827 wrqu
->nwid
.value
= (psa
.psa_nwid
[0] << 8) + psa
.psa_nwid
[1];
1828 wrqu
->nwid
.disabled
= !(psa
.psa_nwid_select
);
1829 wrqu
->nwid
.fixed
= 1; /* Superfluous */
1831 /* Enable interrupts and restore flags. */
1832 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
1837 /*------------------------------------------------------------------*/
1839 * Wireless Handler : set frequency
1841 static int wavelan_set_freq(struct net_device
*dev
,
1842 struct iw_request_info
*info
,
1843 union iwreq_data
*wrqu
,
1846 unsigned long ioaddr
= dev
->base_addr
;
1847 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
1848 unsigned long flags
;
1851 /* Disable interrupts and save flags. */
1852 spin_lock_irqsave(&lp
->spinlock
, flags
);
1854 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
1855 if (!(mmc_in(ioaddr
, mmroff(0, mmr_fee_status
)) &
1856 (MMR_FEE_STATUS_DWLD
| MMR_FEE_STATUS_BUSY
)))
1857 ret
= wv_set_frequency(ioaddr
, &(wrqu
->freq
));
1861 /* Enable interrupts and restore flags. */
1862 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
1867 /*------------------------------------------------------------------*/
1869 * Wireless Handler : get frequency
1871 static int wavelan_get_freq(struct net_device
*dev
,
1872 struct iw_request_info
*info
,
1873 union iwreq_data
*wrqu
,
1876 unsigned long ioaddr
= dev
->base_addr
;
1877 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
1879 unsigned long flags
;
1882 /* Disable interrupts and save flags. */
1883 spin_lock_irqsave(&lp
->spinlock
, flags
);
1885 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
1886 * Does it work for everybody, especially old cards? */
1887 if (!(mmc_in(ioaddr
, mmroff(0, mmr_fee_status
)) &
1888 (MMR_FEE_STATUS_DWLD
| MMR_FEE_STATUS_BUSY
))) {
1889 unsigned short freq
;
1891 /* Ask the EEPROM to read the frequency from the first area. */
1892 fee_read(ioaddr
, 0x00, &freq
, 1);
1893 wrqu
->freq
.m
= ((freq
>> 5) * 5 + 24000L) * 10000;
1896 psa_read(ioaddr
, lp
->hacr
,
1897 (char *) &psa
.psa_subband
- (char *) &psa
,
1898 (unsigned char *) &psa
.psa_subband
, 1);
1900 if (psa
.psa_subband
<= 4) {
1901 wrqu
->freq
.m
= fixed_bands
[psa
.psa_subband
];
1902 wrqu
->freq
.e
= (psa
.psa_subband
!= 0);
1907 /* Enable interrupts and restore flags. */
1908 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
1913 /*------------------------------------------------------------------*/
1915 * Wireless Handler : set level threshold
1917 static int wavelan_set_sens(struct net_device
*dev
,
1918 struct iw_request_info
*info
,
1919 union iwreq_data
*wrqu
,
1922 unsigned long ioaddr
= dev
->base_addr
;
1923 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
1925 unsigned long flags
;
1928 /* Disable interrupts and save flags. */
1929 spin_lock_irqsave(&lp
->spinlock
, flags
);
1931 /* Set the level threshold. */
1932 /* We should complain loudly if wrqu->sens.fixed = 0, because we
1933 * can't set auto mode... */
1934 psa
.psa_thr_pre_set
= wrqu
->sens
.value
& 0x3F;
1935 psa_write(ioaddr
, lp
->hacr
,
1936 (char *) &psa
.psa_thr_pre_set
- (char *) &psa
,
1937 (unsigned char *) &psa
.psa_thr_pre_set
, 1);
1938 /* update the Wavelan checksum */
1939 update_psa_checksum(dev
, ioaddr
, lp
->hacr
);
1940 mmc_out(ioaddr
, mmwoff(0, mmw_thr_pre_set
),
1941 psa
.psa_thr_pre_set
);
1943 /* Enable interrupts and restore flags. */
1944 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
1949 /*------------------------------------------------------------------*/
1951 * Wireless Handler : get level threshold
1953 static int wavelan_get_sens(struct net_device
*dev
,
1954 struct iw_request_info
*info
,
1955 union iwreq_data
*wrqu
,
1958 unsigned long ioaddr
= dev
->base_addr
;
1959 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
1961 unsigned long flags
;
1964 /* Disable interrupts and save flags. */
1965 spin_lock_irqsave(&lp
->spinlock
, flags
);
1967 /* Read the level threshold. */
1968 psa_read(ioaddr
, lp
->hacr
,
1969 (char *) &psa
.psa_thr_pre_set
- (char *) &psa
,
1970 (unsigned char *) &psa
.psa_thr_pre_set
, 1);
1971 wrqu
->sens
.value
= psa
.psa_thr_pre_set
& 0x3F;
1972 wrqu
->sens
.fixed
= 1;
1974 /* Enable interrupts and restore flags. */
1975 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
1980 /*------------------------------------------------------------------*/
1982 * Wireless Handler : set encryption key
1984 static int wavelan_set_encode(struct net_device
*dev
,
1985 struct iw_request_info
*info
,
1986 union iwreq_data
*wrqu
,
1989 unsigned long ioaddr
= dev
->base_addr
;
1990 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
1991 unsigned long flags
;
1995 /* Disable interrupts and save flags. */
1996 spin_lock_irqsave(&lp
->spinlock
, flags
);
1998 /* Check if capable of encryption */
1999 if (!mmc_encr(ioaddr
)) {
2003 /* Check the size of the key */
2004 if((wrqu
->encoding
.length
!= 8) && (wrqu
->encoding
.length
!= 0)) {
2009 /* Basic checking... */
2010 if (wrqu
->encoding
.length
== 8) {
2011 /* Copy the key in the driver */
2012 memcpy(psa
.psa_encryption_key
, extra
,
2013 wrqu
->encoding
.length
);
2014 psa
.psa_encryption_select
= 1;
2016 psa_write(ioaddr
, lp
->hacr
,
2017 (char *) &psa
.psa_encryption_select
-
2019 (unsigned char *) &psa
.
2020 psa_encryption_select
, 8 + 1);
2022 mmc_out(ioaddr
, mmwoff(0, mmw_encr_enable
),
2023 MMW_ENCR_ENABLE_EN
| MMW_ENCR_ENABLE_MODE
);
2024 mmc_write(ioaddr
, mmwoff(0, mmw_encr_key
),
2025 (unsigned char *) &psa
.
2026 psa_encryption_key
, 8);
2029 /* disable encryption */
2030 if (wrqu
->encoding
.flags
& IW_ENCODE_DISABLED
) {
2031 psa
.psa_encryption_select
= 0;
2032 psa_write(ioaddr
, lp
->hacr
,
2033 (char *) &psa
.psa_encryption_select
-
2035 (unsigned char *) &psa
.
2036 psa_encryption_select
, 1);
2038 mmc_out(ioaddr
, mmwoff(0, mmw_encr_enable
), 0);
2040 /* update the Wavelan checksum */
2041 update_psa_checksum(dev
, ioaddr
, lp
->hacr
);
2044 /* Enable interrupts and restore flags. */
2045 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2050 /*------------------------------------------------------------------*/
2052 * Wireless Handler : get encryption key
2054 static int wavelan_get_encode(struct net_device
*dev
,
2055 struct iw_request_info
*info
,
2056 union iwreq_data
*wrqu
,
2059 unsigned long ioaddr
= dev
->base_addr
;
2060 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
2062 unsigned long flags
;
2065 /* Disable interrupts and save flags. */
2066 spin_lock_irqsave(&lp
->spinlock
, flags
);
2068 /* Check if encryption is available */
2069 if (!mmc_encr(ioaddr
)) {
2072 /* Read the encryption key */
2073 psa_read(ioaddr
, lp
->hacr
,
2074 (char *) &psa
.psa_encryption_select
-
2076 (unsigned char *) &psa
.
2077 psa_encryption_select
, 1 + 8);
2079 /* encryption is enabled ? */
2080 if (psa
.psa_encryption_select
)
2081 wrqu
->encoding
.flags
= IW_ENCODE_ENABLED
;
2083 wrqu
->encoding
.flags
= IW_ENCODE_DISABLED
;
2084 wrqu
->encoding
.flags
|= mmc_encr(ioaddr
);
2086 /* Copy the key to the user buffer */
2087 wrqu
->encoding
.length
= 8;
2088 memcpy(extra
, psa
.psa_encryption_key
, wrqu
->encoding
.length
);
2091 /* Enable interrupts and restore flags. */
2092 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2097 /*------------------------------------------------------------------*/
2099 * Wireless Handler : get range info
2101 static int wavelan_get_range(struct net_device
*dev
,
2102 struct iw_request_info
*info
,
2103 union iwreq_data
*wrqu
,
2106 unsigned long ioaddr
= dev
->base_addr
;
2107 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
2108 struct iw_range
*range
= (struct iw_range
*) extra
;
2109 unsigned long flags
;
2112 /* Set the length (very important for backward compatibility) */
2113 wrqu
->data
.length
= sizeof(struct iw_range
);
2115 /* Set all the info we don't care or don't know about to zero */
2116 memset(range
, 0, sizeof(struct iw_range
));
2118 /* Set the Wireless Extension versions */
2119 range
->we_version_compiled
= WIRELESS_EXT
;
2120 range
->we_version_source
= 9;
2122 /* Set information in the range struct. */
2123 range
->throughput
= 1.6 * 1000 * 1000; /* don't argue on this ! */
2124 range
->min_nwid
= 0x0000;
2125 range
->max_nwid
= 0xFFFF;
2127 range
->sensitivity
= 0x3F;
2128 range
->max_qual
.qual
= MMR_SGNL_QUAL
;
2129 range
->max_qual
.level
= MMR_SIGNAL_LVL
;
2130 range
->max_qual
.noise
= MMR_SILENCE_LVL
;
2131 range
->avg_qual
.qual
= MMR_SGNL_QUAL
; /* Always max */
2132 /* Need to get better values for those two */
2133 range
->avg_qual
.level
= 30;
2134 range
->avg_qual
.noise
= 8;
2136 range
->num_bitrates
= 1;
2137 range
->bitrate
[0] = 2000000; /* 2 Mb/s */
2139 /* Event capability (kernel + driver) */
2140 range
->event_capa
[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
2141 IW_EVENT_CAPA_MASK(0x8B04));
2142 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
2144 /* Disable interrupts and save flags. */
2145 spin_lock_irqsave(&lp
->spinlock
, flags
);
2147 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
2148 if (!(mmc_in(ioaddr
, mmroff(0, mmr_fee_status
)) &
2149 (MMR_FEE_STATUS_DWLD
| MMR_FEE_STATUS_BUSY
))) {
2150 range
->num_channels
= 10;
2151 range
->num_frequency
= wv_frequency_list(ioaddr
, range
->freq
,
2152 IW_MAX_FREQUENCIES
);
2154 range
->num_channels
= range
->num_frequency
= 0;
2156 /* Encryption supported ? */
2157 if (mmc_encr(ioaddr
)) {
2158 range
->encoding_size
[0] = 8; /* DES = 64 bits key */
2159 range
->num_encoding_sizes
= 1;
2160 range
->max_encoding_tokens
= 1; /* Only one key possible */
2162 range
->num_encoding_sizes
= 0;
2163 range
->max_encoding_tokens
= 0;
2166 /* Enable interrupts and restore flags. */
2167 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2172 /*------------------------------------------------------------------*/
2174 * Wireless Private Handler : set quality threshold
2176 static int wavelan_set_qthr(struct net_device
*dev
,
2177 struct iw_request_info
*info
,
2178 union iwreq_data
*wrqu
,
2181 unsigned long ioaddr
= dev
->base_addr
;
2182 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
2184 unsigned long flags
;
2186 /* Disable interrupts and save flags. */
2187 spin_lock_irqsave(&lp
->spinlock
, flags
);
2189 psa
.psa_quality_thr
= *(extra
) & 0x0F;
2190 psa_write(ioaddr
, lp
->hacr
,
2191 (char *) &psa
.psa_quality_thr
- (char *) &psa
,
2192 (unsigned char *) &psa
.psa_quality_thr
, 1);
2193 /* update the Wavelan checksum */
2194 update_psa_checksum(dev
, ioaddr
, lp
->hacr
);
2195 mmc_out(ioaddr
, mmwoff(0, mmw_quality_thr
),
2196 psa
.psa_quality_thr
);
2198 /* Enable interrupts and restore flags. */
2199 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2204 /*------------------------------------------------------------------*/
2206 * Wireless Private Handler : get quality threshold
2208 static int wavelan_get_qthr(struct net_device
*dev
,
2209 struct iw_request_info
*info
,
2210 union iwreq_data
*wrqu
,
2213 unsigned long ioaddr
= dev
->base_addr
;
2214 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
2216 unsigned long flags
;
2218 /* Disable interrupts and save flags. */
2219 spin_lock_irqsave(&lp
->spinlock
, flags
);
2221 psa_read(ioaddr
, lp
->hacr
,
2222 (char *) &psa
.psa_quality_thr
- (char *) &psa
,
2223 (unsigned char *) &psa
.psa_quality_thr
, 1);
2224 *(extra
) = psa
.psa_quality_thr
& 0x0F;
2226 /* Enable interrupts and restore flags. */
2227 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2233 /*------------------------------------------------------------------*/
2235 * Wireless Private Handler : set histogram
2237 static int wavelan_set_histo(struct net_device
*dev
,
2238 struct iw_request_info
*info
,
2239 union iwreq_data
*wrqu
,
2242 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
2244 /* Check the number of intervals. */
2245 if (wrqu
->data
.length
> 16) {
2249 /* Disable histo while we copy the addresses.
2250 * As we don't disable interrupts, we need to do this */
2253 /* Are there ranges to copy? */
2254 if (wrqu
->data
.length
> 0) {
2255 /* Copy interval ranges to the driver */
2256 memcpy(lp
->his_range
, extra
, wrqu
->data
.length
);
2260 printk(KERN_DEBUG
"Histo :");
2261 for(i
= 0; i
< wrqu
->data
.length
; i
++)
2262 printk(" %d", lp
->his_range
[i
]);
2266 /* Reset result structure. */
2267 memset(lp
->his_sum
, 0x00, sizeof(long) * 16);
2270 /* Now we can set the number of ranges */
2271 lp
->his_number
= wrqu
->data
.length
;
2276 /*------------------------------------------------------------------*/
2278 * Wireless Private Handler : get histogram
2280 static int wavelan_get_histo(struct net_device
*dev
,
2281 struct iw_request_info
*info
,
2282 union iwreq_data
*wrqu
,
2285 net_local
*lp
= (net_local
*) dev
->priv
; /* lp is not unused */
2287 /* Set the number of intervals. */
2288 wrqu
->data
.length
= lp
->his_number
;
2290 /* Give back the distribution statistics */
2291 if(lp
->his_number
> 0)
2292 memcpy(extra
, lp
->his_sum
, sizeof(long) * lp
->his_number
);
2296 #endif /* HISTOGRAM */
2298 /*------------------------------------------------------------------*/
2300 * Structures to export the Wireless Handlers
2303 static const iw_handler wavelan_handler
[] =
2305 NULL
, /* SIOCSIWNAME */
2306 wavelan_get_name
, /* SIOCGIWNAME */
2307 wavelan_set_nwid
, /* SIOCSIWNWID */
2308 wavelan_get_nwid
, /* SIOCGIWNWID */
2309 wavelan_set_freq
, /* SIOCSIWFREQ */
2310 wavelan_get_freq
, /* SIOCGIWFREQ */
2311 NULL
, /* SIOCSIWMODE */
2312 NULL
, /* SIOCGIWMODE */
2313 wavelan_set_sens
, /* SIOCSIWSENS */
2314 wavelan_get_sens
, /* SIOCGIWSENS */
2315 NULL
, /* SIOCSIWRANGE */
2316 wavelan_get_range
, /* SIOCGIWRANGE */
2317 NULL
, /* SIOCSIWPRIV */
2318 NULL
, /* SIOCGIWPRIV */
2319 NULL
, /* SIOCSIWSTATS */
2320 NULL
, /* SIOCGIWSTATS */
2321 iw_handler_set_spy
, /* SIOCSIWSPY */
2322 iw_handler_get_spy
, /* SIOCGIWSPY */
2323 iw_handler_set_thrspy
, /* SIOCSIWTHRSPY */
2324 iw_handler_get_thrspy
, /* SIOCGIWTHRSPY */
2325 NULL
, /* SIOCSIWAP */
2326 NULL
, /* SIOCGIWAP */
2327 NULL
, /* -- hole -- */
2328 NULL
, /* SIOCGIWAPLIST */
2329 NULL
, /* -- hole -- */
2330 NULL
, /* -- hole -- */
2331 NULL
, /* SIOCSIWESSID */
2332 NULL
, /* SIOCGIWESSID */
2333 NULL
, /* SIOCSIWNICKN */
2334 NULL
, /* SIOCGIWNICKN */
2335 NULL
, /* -- hole -- */
2336 NULL
, /* -- hole -- */
2337 NULL
, /* SIOCSIWRATE */
2338 NULL
, /* SIOCGIWRATE */
2339 NULL
, /* SIOCSIWRTS */
2340 NULL
, /* SIOCGIWRTS */
2341 NULL
, /* SIOCSIWFRAG */
2342 NULL
, /* SIOCGIWFRAG */
2343 NULL
, /* SIOCSIWTXPOW */
2344 NULL
, /* SIOCGIWTXPOW */
2345 NULL
, /* SIOCSIWRETRY */
2346 NULL
, /* SIOCGIWRETRY */
2347 /* Bummer ! Why those are only at the end ??? */
2348 wavelan_set_encode
, /* SIOCSIWENCODE */
2349 wavelan_get_encode
, /* SIOCGIWENCODE */
2352 static const iw_handler wavelan_private_handler
[] =
2354 wavelan_set_qthr
, /* SIOCIWFIRSTPRIV */
2355 wavelan_get_qthr
, /* SIOCIWFIRSTPRIV + 1 */
2357 wavelan_set_histo
, /* SIOCIWFIRSTPRIV + 2 */
2358 wavelan_get_histo
, /* SIOCIWFIRSTPRIV + 3 */
2359 #endif /* HISTOGRAM */
2362 static const struct iw_priv_args wavelan_private_args
[] = {
2363 /*{ cmd, set_args, get_args, name } */
2364 { SIOCSIPQTHR
, IW_PRIV_TYPE_BYTE
| IW_PRIV_SIZE_FIXED
| 1, 0, "setqualthr" },
2365 { SIOCGIPQTHR
, 0, IW_PRIV_TYPE_BYTE
| IW_PRIV_SIZE_FIXED
| 1, "getqualthr" },
2366 { SIOCSIPHISTO
, IW_PRIV_TYPE_BYTE
| 16, 0, "sethisto" },
2367 { SIOCGIPHISTO
, 0, IW_PRIV_TYPE_INT
| 16, "gethisto" },
2370 static const struct iw_handler_def wavelan_handler_def
=
2372 .num_standard
= ARRAY_SIZE(wavelan_handler
),
2373 .num_private
= ARRAY_SIZE(wavelan_private_handler
),
2374 .num_private_args
= ARRAY_SIZE(wavelan_private_args
),
2375 .standard
= wavelan_handler
,
2376 .private = wavelan_private_handler
,
2377 .private_args
= wavelan_private_args
,
2378 .get_wireless_stats
= wavelan_get_wireless_stats
,
2381 /*------------------------------------------------------------------*/
2383 * Get wireless statistics.
2384 * Called by /proc/net/wireless
2386 static iw_stats
*wavelan_get_wireless_stats(struct net_device
* dev
)
2388 unsigned long ioaddr
= dev
->base_addr
;
2389 net_local
*lp
= (net_local
*) dev
->priv
;
2392 unsigned long flags
;
2394 #ifdef DEBUG_IOCTL_TRACE
2395 printk(KERN_DEBUG
"%s: ->wavelan_get_wireless_stats()\n",
2400 if (lp
== (net_local
*) NULL
)
2401 return (iw_stats
*) NULL
;
2403 /* Disable interrupts and save flags. */
2404 spin_lock_irqsave(&lp
->spinlock
, flags
);
2406 wstats
= &lp
->wstats
;
2408 /* Get data from the mmc. */
2409 mmc_out(ioaddr
, mmwoff(0, mmw_freeze
), 1);
2411 mmc_read(ioaddr
, mmroff(0, mmr_dce_status
), &m
.mmr_dce_status
, 1);
2412 mmc_read(ioaddr
, mmroff(0, mmr_wrong_nwid_l
), &m
.mmr_wrong_nwid_l
,
2414 mmc_read(ioaddr
, mmroff(0, mmr_thr_pre_set
), &m
.mmr_thr_pre_set
,
2417 mmc_out(ioaddr
, mmwoff(0, mmw_freeze
), 0);
2419 /* Copy data to wireless stuff. */
2420 wstats
->status
= m
.mmr_dce_status
& MMR_DCE_STATUS
;
2421 wstats
->qual
.qual
= m
.mmr_sgnl_qual
& MMR_SGNL_QUAL
;
2422 wstats
->qual
.level
= m
.mmr_signal_lvl
& MMR_SIGNAL_LVL
;
2423 wstats
->qual
.noise
= m
.mmr_silence_lvl
& MMR_SILENCE_LVL
;
2424 wstats
->qual
.updated
= (((m
. mmr_signal_lvl
& MMR_SIGNAL_LVL_VALID
) >> 7)
2425 | ((m
.mmr_signal_lvl
& MMR_SIGNAL_LVL_VALID
) >> 6)
2426 | ((m
.mmr_silence_lvl
& MMR_SILENCE_LVL_VALID
) >> 5));
2427 wstats
->discard
.nwid
+= (m
.mmr_wrong_nwid_h
<< 8) | m
.mmr_wrong_nwid_l
;
2428 wstats
->discard
.code
= 0L;
2429 wstats
->discard
.misc
= 0L;
2431 /* Enable interrupts and restore flags. */
2432 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2434 #ifdef DEBUG_IOCTL_TRACE
2435 printk(KERN_DEBUG
"%s: <-wavelan_get_wireless_stats()\n",
2441 /************************* PACKET RECEPTION *************************/
2443 * This part deals with receiving the packets.
2444 * The interrupt handler gets an interrupt when a packet has been
2445 * successfully received and calls this part.
2448 /*------------------------------------------------------------------*/
2450 * This routine does the actual copying of data (including the Ethernet
2451 * header structure) from the WaveLAN card to an sk_buff chain that
2452 * will be passed up to the network interface layer. NOTE: we
2453 * currently don't handle trailer protocols (neither does the rest of
2454 * the network interface), so if that is needed, it will (at least in
2455 * part) be added here. The contents of the receive ring buffer are
2456 * copied to a message chain that is then passed to the kernel.
2458 * Note: if any errors occur, the packet is "dropped on the floor".
2459 * (called by wv_packet_rcv())
2462 wv_packet_read(struct net_device
* dev
, u16 buf_off
, int sksize
)
2464 net_local
*lp
= (net_local
*) dev
->priv
;
2465 unsigned long ioaddr
= dev
->base_addr
;
2466 struct sk_buff
*skb
;
2468 #ifdef DEBUG_RX_TRACE
2469 printk(KERN_DEBUG
"%s: ->wv_packet_read(0x%X, %d)\n",
2470 dev
->name
, buf_off
, sksize
);
2473 /* Allocate buffer for the data */
2474 if ((skb
= dev_alloc_skb(sksize
)) == (struct sk_buff
*) NULL
) {
2475 #ifdef DEBUG_RX_ERROR
2477 "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n",
2480 lp
->stats
.rx_dropped
++;
2484 /* Copy the packet to the buffer. */
2485 obram_read(ioaddr
, buf_off
, skb_put(skb
, sksize
), sksize
);
2486 skb
->protocol
= eth_type_trans(skb
, dev
);
2488 #ifdef DEBUG_RX_INFO
2489 wv_packet_info(skb_mac_header(skb
), sksize
, dev
->name
,
2491 #endif /* DEBUG_RX_INFO */
2493 /* Statistics-gathering and associated stuff.
2494 * It seem a bit messy with all the define, but it's really
2497 #ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
2498 (lp
->spy_data
.spy_number
> 0) ||
2499 #endif /* IW_WIRELESS_SPY */
2501 (lp
->his_number
> 0) ||
2502 #endif /* HISTOGRAM */
2504 u8 stats
[3]; /* signal level, noise level, signal quality */
2506 /* Read signal level, silence level and signal quality bytes */
2507 /* Note: in the PCMCIA hardware, these are part of the frame.
2508 * It seems that for the ISA hardware, it's nowhere to be
2509 * found in the frame, so I'm obliged to do this (it has a
2510 * side effect on /proc/net/wireless).
2513 mmc_out(ioaddr
, mmwoff(0, mmw_freeze
), 1);
2514 mmc_read(ioaddr
, mmroff(0, mmr_signal_lvl
), stats
, 3);
2515 mmc_out(ioaddr
, mmwoff(0, mmw_freeze
), 0);
2517 #ifdef DEBUG_RX_INFO
2519 "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
2520 dev
->name
, stats
[0] & 0x3F, stats
[1] & 0x3F,
2525 #ifdef IW_WIRELESS_SPY
2526 wl_spy_gather(dev
, skb_mac_header(skb
) + WAVELAN_ADDR_SIZE
,
2528 #endif /* IW_WIRELESS_SPY */
2530 wl_his_gather(dev
, stats
);
2531 #endif /* HISTOGRAM */
2535 * Hand the packet to the network module.
2539 /* Keep statistics up to date */
2540 dev
->last_rx
= jiffies
;
2541 lp
->stats
.rx_packets
++;
2542 lp
->stats
.rx_bytes
+= sksize
;
2544 #ifdef DEBUG_RX_TRACE
2545 printk(KERN_DEBUG
"%s: <-wv_packet_read()\n", dev
->name
);
2549 /*------------------------------------------------------------------*/
2551 * Transfer as many packets as we can
2552 * from the device RAM.
2553 * (called in wavelan_interrupt()).
2554 * Note : the spinlock is already grabbed for us.
2556 static void wv_receive(struct net_device
* dev
)
2558 unsigned long ioaddr
= dev
->base_addr
;
2559 net_local
*lp
= (net_local
*) dev
->priv
;
2564 #ifdef DEBUG_RX_TRACE
2565 printk(KERN_DEBUG
"%s: ->wv_receive()\n", dev
->name
);
2568 /* Loop on each received packet. */
2570 obram_read(ioaddr
, lp
->rx_head
, (unsigned char *) &fd
,
2573 /* Note about the status :
2574 * It start up to be 0 (the value we set). Then, when the RU
2575 * grab the buffer to prepare for reception, it sets the
2576 * FD_STATUS_B flag. When the RU has finished receiving the
2577 * frame, it clears FD_STATUS_B, set FD_STATUS_C to indicate
2578 * completion and set the other flags to indicate the eventual
2579 * errors. FD_STATUS_OK indicates that the reception was OK.
2582 /* If the current frame is not complete, we have reached the end. */
2583 if ((fd
.fd_status
& FD_STATUS_C
) != FD_STATUS_C
)
2584 break; /* This is how we exit the loop. */
2588 /* Check whether frame was correctly received. */
2589 if ((fd
.fd_status
& FD_STATUS_OK
) == FD_STATUS_OK
) {
2590 /* Does the frame contain a pointer to the data? Let's check. */
2591 if (fd
.fd_rbd_offset
!= I82586NULL
) {
2592 /* Read the receive buffer descriptor */
2593 obram_read(ioaddr
, fd
.fd_rbd_offset
,
2594 (unsigned char *) &rbd
,
2597 #ifdef DEBUG_RX_ERROR
2598 if ((rbd
.rbd_status
& RBD_STATUS_EOF
) !=
2599 RBD_STATUS_EOF
) printk(KERN_INFO
2600 "%s: wv_receive(): missing EOF flag.\n",
2603 if ((rbd
.rbd_status
& RBD_STATUS_F
) !=
2604 RBD_STATUS_F
) printk(KERN_INFO
2605 "%s: wv_receive(): missing F flag.\n",
2607 #endif /* DEBUG_RX_ERROR */
2609 /* Read the packet and transmit to Linux */
2610 wv_packet_read(dev
, rbd
.rbd_bufl
,
2615 #ifdef DEBUG_RX_ERROR
2616 else /* if frame has no data */
2618 "%s: wv_receive(): frame has no data.\n",
2621 } else { /* If reception was no successful */
2623 lp
->stats
.rx_errors
++;
2625 #ifdef DEBUG_RX_INFO
2627 "%s: wv_receive(): frame not received successfully (%X).\n",
2628 dev
->name
, fd
.fd_status
);
2631 #ifdef DEBUG_RX_ERROR
2632 if ((fd
.fd_status
& FD_STATUS_S6
) != 0)
2634 "%s: wv_receive(): no EOF flag.\n",
2638 if ((fd
.fd_status
& FD_STATUS_S7
) != 0) {
2639 lp
->stats
.rx_length_errors
++;
2640 #ifdef DEBUG_RX_FAIL
2642 "%s: wv_receive(): frame too short.\n",
2647 if ((fd
.fd_status
& FD_STATUS_S8
) != 0) {
2648 lp
->stats
.rx_over_errors
++;
2649 #ifdef DEBUG_RX_FAIL
2651 "%s: wv_receive(): rx DMA overrun.\n",
2656 if ((fd
.fd_status
& FD_STATUS_S9
) != 0) {
2657 lp
->stats
.rx_fifo_errors
++;
2658 #ifdef DEBUG_RX_FAIL
2660 "%s: wv_receive(): ran out of resources.\n",
2665 if ((fd
.fd_status
& FD_STATUS_S10
) != 0) {
2666 lp
->stats
.rx_frame_errors
++;
2667 #ifdef DEBUG_RX_FAIL
2669 "%s: wv_receive(): alignment error.\n",
2674 if ((fd
.fd_status
& FD_STATUS_S11
) != 0) {
2675 lp
->stats
.rx_crc_errors
++;
2676 #ifdef DEBUG_RX_FAIL
2678 "%s: wv_receive(): CRC error.\n",
2685 obram_write(ioaddr
, fdoff(lp
->rx_head
, fd_status
),
2686 (unsigned char *) &fd
.fd_status
,
2687 sizeof(fd
.fd_status
));
2689 fd
.fd_command
= FD_COMMAND_EL
;
2690 obram_write(ioaddr
, fdoff(lp
->rx_head
, fd_command
),
2691 (unsigned char *) &fd
.fd_command
,
2692 sizeof(fd
.fd_command
));
2695 obram_write(ioaddr
, fdoff(lp
->rx_last
, fd_command
),
2696 (unsigned char *) &fd
.fd_command
,
2697 sizeof(fd
.fd_command
));
2699 lp
->rx_last
= lp
->rx_head
;
2700 lp
->rx_head
= fd
.fd_link_offset
;
2701 } /* for(;;) -> loop on all frames */
2703 #ifdef DEBUG_RX_INFO
2705 printk(KERN_DEBUG
"%s: wv_receive(): reaped %d\n",
2706 dev
->name
, nreaped
);
2708 #ifdef DEBUG_RX_TRACE
2709 printk(KERN_DEBUG
"%s: <-wv_receive()\n", dev
->name
);
2713 /*********************** PACKET TRANSMISSION ***********************/
2715 * This part deals with sending packets through the WaveLAN.
2719 /*------------------------------------------------------------------*/
2721 * This routine fills in the appropriate registers and memory
2722 * locations on the WaveLAN card and starts the card off on
2726 * Each block contains a transmit command, a NOP command,
2727 * a transmit block descriptor and a buffer.
2728 * The CU read the transmit block which point to the tbd,
2729 * read the tbd and the content of the buffer.
2730 * When it has finish with it, it goes to the next command
2731 * which in our case is the NOP. The NOP points on itself,
2732 * so the CU stop here.
2733 * When we add the next block, we modify the previous nop
2734 * to make it point on the new tx command.
2735 * Simple, isn't it ?
2737 * (called in wavelan_packet_xmit())
2739 static int wv_packet_write(struct net_device
* dev
, void *buf
, short length
)
2741 net_local
*lp
= (net_local
*) dev
->priv
;
2742 unsigned long ioaddr
= dev
->base_addr
;
2743 unsigned short txblock
;
2744 unsigned short txpred
;
2745 unsigned short tx_addr
;
2746 unsigned short nop_addr
;
2747 unsigned short tbd_addr
;
2748 unsigned short buf_addr
;
2753 unsigned long flags
;
2755 #ifdef DEBUG_TX_TRACE
2756 printk(KERN_DEBUG
"%s: ->wv_packet_write(%d)\n", dev
->name
,
2760 spin_lock_irqsave(&lp
->spinlock
, flags
);
2762 /* Check nothing bad has happened */
2763 if (lp
->tx_n_in_use
== (NTXBLOCKS
- 1)) {
2764 #ifdef DEBUG_TX_ERROR
2765 printk(KERN_INFO
"%s: wv_packet_write(): Tx queue full.\n",
2768 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2772 /* Calculate addresses of next block and previous block. */
2773 txblock
= lp
->tx_first_free
;
2774 txpred
= txblock
- TXBLOCKZ
;
2775 if (txpred
< OFFSET_CU
)
2776 txpred
+= NTXBLOCKS
* TXBLOCKZ
;
2777 lp
->tx_first_free
+= TXBLOCKZ
;
2778 if (lp
->tx_first_free
>= OFFSET_CU
+ NTXBLOCKS
* TXBLOCKZ
)
2779 lp
->tx_first_free
-= NTXBLOCKS
* TXBLOCKZ
;
2783 /* Calculate addresses of the different parts of the block. */
2785 nop_addr
= tx_addr
+ sizeof(tx
);
2786 tbd_addr
= nop_addr
+ sizeof(nop
);
2787 buf_addr
= tbd_addr
+ sizeof(tbd
);
2792 tx
.tx_h
.ac_status
= 0;
2793 obram_write(ioaddr
, toff(ac_tx_t
, tx_addr
, tx_h
.ac_status
),
2794 (unsigned char *) &tx
.tx_h
.ac_status
,
2795 sizeof(tx
.tx_h
.ac_status
));
2800 nop
.nop_h
.ac_status
= 0;
2801 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_status
),
2802 (unsigned char *) &nop
.nop_h
.ac_status
,
2803 sizeof(nop
.nop_h
.ac_status
));
2804 nop
.nop_h
.ac_link
= nop_addr
;
2805 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_link
),
2806 (unsigned char *) &nop
.nop_h
.ac_link
,
2807 sizeof(nop
.nop_h
.ac_link
));
2810 * Transmit buffer descriptor
2812 tbd
.tbd_status
= TBD_STATUS_EOF
| (TBD_STATUS_ACNT
& clen
);
2813 tbd
.tbd_next_bd_offset
= I82586NULL
;
2814 tbd
.tbd_bufl
= buf_addr
;
2816 obram_write(ioaddr
, tbd_addr
, (unsigned char *) &tbd
, sizeof(tbd
));
2821 obram_write(ioaddr
, buf_addr
, buf
, length
);
2824 * Overwrite the predecessor NOP link
2825 * so that it points to this txblock.
2827 nop_addr
= txpred
+ sizeof(tx
);
2828 nop
.nop_h
.ac_status
= 0;
2829 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_status
),
2830 (unsigned char *) &nop
.nop_h
.ac_status
,
2831 sizeof(nop
.nop_h
.ac_status
));
2832 nop
.nop_h
.ac_link
= txblock
;
2833 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_link
),
2834 (unsigned char *) &nop
.nop_h
.ac_link
,
2835 sizeof(nop
.nop_h
.ac_link
));
2837 /* Make sure the watchdog will keep quiet for a while */
2838 dev
->trans_start
= jiffies
;
2840 /* Keep stats up to date. */
2841 lp
->stats
.tx_bytes
+= length
;
2843 if (lp
->tx_first_in_use
== I82586NULL
)
2844 lp
->tx_first_in_use
= txblock
;
2846 if (lp
->tx_n_in_use
< NTXBLOCKS
- 1)
2847 netif_wake_queue(dev
);
2849 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2851 #ifdef DEBUG_TX_INFO
2852 wv_packet_info((u8
*) buf
, length
, dev
->name
,
2854 #endif /* DEBUG_TX_INFO */
2856 #ifdef DEBUG_TX_TRACE
2857 printk(KERN_DEBUG
"%s: <-wv_packet_write()\n", dev
->name
);
2863 /*------------------------------------------------------------------*/
2865 * This routine is called when we want to send a packet (NET3 callback)
2866 * In this routine, we check if the harware is ready to accept
2867 * the packet. We also prevent reentrance. Then we call the function
2868 * to send the packet.
2870 static int wavelan_packet_xmit(struct sk_buff
*skb
, struct net_device
* dev
)
2872 net_local
*lp
= (net_local
*) dev
->priv
;
2873 unsigned long flags
;
2874 char data
[ETH_ZLEN
];
2876 #ifdef DEBUG_TX_TRACE
2877 printk(KERN_DEBUG
"%s: ->wavelan_packet_xmit(0x%X)\n", dev
->name
,
2882 * Block a timer-based transmit from overlapping.
2883 * In other words, prevent reentering this routine.
2885 netif_stop_queue(dev
);
2887 /* If somebody has asked to reconfigure the controller,
2890 if (lp
->reconfig_82586
) {
2891 spin_lock_irqsave(&lp
->spinlock
, flags
);
2892 wv_82586_config(dev
);
2893 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
2894 /* Check that we can continue */
2895 if (lp
->tx_n_in_use
== (NTXBLOCKS
- 1))
2898 #ifdef DEBUG_TX_ERROR
2900 printk(KERN_INFO
"skb has next\n");
2903 /* Do we need some padding? */
2904 /* Note : on wireless the propagation time is in the order of 1us,
2905 * and we don't have the Ethernet specific requirement of beeing
2906 * able to detect collisions, therefore in theory we don't really
2907 * need to pad. Jean II */
2908 if (skb
->len
< ETH_ZLEN
) {
2909 memset(data
, 0, ETH_ZLEN
);
2910 skb_copy_from_linear_data(skb
, data
, skb
->len
);
2911 /* Write packet on the card */
2912 if(wv_packet_write(dev
, data
, ETH_ZLEN
))
2913 return 1; /* We failed */
2915 else if(wv_packet_write(dev
, skb
->data
, skb
->len
))
2916 return 1; /* We failed */
2921 #ifdef DEBUG_TX_TRACE
2922 printk(KERN_DEBUG
"%s: <-wavelan_packet_xmit()\n", dev
->name
);
2927 /*********************** HARDWARE CONFIGURATION ***********************/
2929 * This part does the real job of starting and configuring the hardware.
2932 /*--------------------------------------------------------------------*/
2934 * Routine to initialize the Modem Management Controller.
2935 * (called by wv_hw_reset())
2937 static int wv_mmc_init(struct net_device
* dev
)
2939 unsigned long ioaddr
= dev
->base_addr
;
2940 net_local
*lp
= (net_local
*) dev
->priv
;
2945 #ifdef DEBUG_CONFIG_TRACE
2946 printk(KERN_DEBUG
"%s: ->wv_mmc_init()\n", dev
->name
);
2949 /* Read the parameter storage area. */
2950 psa_read(ioaddr
, lp
->hacr
, 0, (unsigned char *) &psa
, sizeof(psa
));
2952 #ifdef USE_PSA_CONFIG
2953 configured
= psa
.psa_conf_status
& 1;
2958 /* Is the PSA is not configured */
2960 /* User will be able to configure NWID later (with iwconfig). */
2961 psa
.psa_nwid
[0] = 0;
2962 psa
.psa_nwid
[1] = 0;
2964 /* no NWID checking since NWID is not set */
2965 psa
.psa_nwid_select
= 0;
2967 /* Disable encryption */
2968 psa
.psa_encryption_select
= 0;
2970 /* Set to standard values:
2973 * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
2975 if (psa
.psa_comp_number
& 1)
2976 psa
.psa_thr_pre_set
= 0x01;
2978 psa
.psa_thr_pre_set
= 0x04;
2979 psa
.psa_quality_thr
= 0x03;
2981 /* It is configured */
2982 psa
.psa_conf_status
|= 1;
2984 #ifdef USE_PSA_CONFIG
2985 /* Write the psa. */
2986 psa_write(ioaddr
, lp
->hacr
,
2987 (char *) psa
.psa_nwid
- (char *) &psa
,
2988 (unsigned char *) psa
.psa_nwid
, 4);
2989 psa_write(ioaddr
, lp
->hacr
,
2990 (char *) &psa
.psa_thr_pre_set
- (char *) &psa
,
2991 (unsigned char *) &psa
.psa_thr_pre_set
, 1);
2992 psa_write(ioaddr
, lp
->hacr
,
2993 (char *) &psa
.psa_quality_thr
- (char *) &psa
,
2994 (unsigned char *) &psa
.psa_quality_thr
, 1);
2995 psa_write(ioaddr
, lp
->hacr
,
2996 (char *) &psa
.psa_conf_status
- (char *) &psa
,
2997 (unsigned char *) &psa
.psa_conf_status
, 1);
2998 /* update the Wavelan checksum */
2999 update_psa_checksum(dev
, ioaddr
, lp
->hacr
);
3003 /* Zero the mmc structure. */
3004 memset(&m
, 0x00, sizeof(m
));
3006 /* Copy PSA info to the mmc. */
3007 m
.mmw_netw_id_l
= psa
.psa_nwid
[1];
3008 m
.mmw_netw_id_h
= psa
.psa_nwid
[0];
3010 if (psa
.psa_nwid_select
& 1)
3011 m
.mmw_loopt_sel
= 0x00;
3013 m
.mmw_loopt_sel
= MMW_LOOPT_SEL_DIS_NWID
;
3015 memcpy(&m
.mmw_encr_key
, &psa
.psa_encryption_key
,
3016 sizeof(m
.mmw_encr_key
));
3018 if (psa
.psa_encryption_select
)
3020 MMW_ENCR_ENABLE_EN
| MMW_ENCR_ENABLE_MODE
;
3022 m
.mmw_encr_enable
= 0;
3024 m
.mmw_thr_pre_set
= psa
.psa_thr_pre_set
& 0x3F;
3025 m
.mmw_quality_thr
= psa
.psa_quality_thr
& 0x0F;
3028 * Set default modem control parameters.
3029 * See NCR document 407-0024326 Rev. A.
3031 m
.mmw_jabber_enable
= 0x01;
3033 m
.mmw_anten_sel
= MMW_ANTEN_SEL_ALG_EN
;
3035 m
.mmw_mod_delay
= 0x04;
3036 m
.mmw_jam_time
= 0x38;
3038 m
.mmw_des_io_invert
= 0;
3039 m
.mmw_decay_prm
= 0;
3040 m
.mmw_decay_updat_prm
= 0;
3042 /* Write all info to MMC. */
3043 mmc_write(ioaddr
, 0, (u8
*) & m
, sizeof(m
));
3045 /* The following code starts the modem of the 2.00 frequency
3046 * selectable cards at power on. It's not strictly needed for the
3048 * The original patch was by Joe Finney for the PCMCIA driver, but
3049 * I've cleaned it up a bit and added documentation.
3050 * Thanks to Loeke Brederveld from Lucent for the info.
3053 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
3054 * Does it work for everybody, especially old cards? */
3055 /* Note: WFREQSEL verifies that it is able to read a sensible
3056 * frequency from EEPROM (address 0x00) and that MMR_FEE_STATUS_ID
3057 * is 0xA (Xilinx version) or 0xB (Ariadne version).
3058 * My test is more crude but does work. */
3059 if (!(mmc_in(ioaddr
, mmroff(0, mmr_fee_status
)) &
3060 (MMR_FEE_STATUS_DWLD
| MMR_FEE_STATUS_BUSY
))) {
3061 /* We must download the frequency parameters to the
3062 * synthesizers (from the EEPROM - area 1)
3063 * Note: as the EEPROM is automatically decremented, we set the end
3065 m
.mmw_fee_addr
= 0x0F;
3066 m
.mmw_fee_ctrl
= MMW_FEE_CTRL_READ
| MMW_FEE_CTRL_DWLD
;
3067 mmc_write(ioaddr
, (char *) &m
.mmw_fee_ctrl
- (char *) &m
,
3068 (unsigned char *) &m
.mmw_fee_ctrl
, 2);
3070 /* Wait until the download is finished. */
3071 fee_wait(ioaddr
, 100, 100);
3073 #ifdef DEBUG_CONFIG_INFO
3074 /* The frequency was in the last word downloaded. */
3075 mmc_read(ioaddr
, (char *) &m
.mmw_fee_data_l
- (char *) &m
,
3076 (unsigned char *) &m
.mmw_fee_data_l
, 2);
3078 /* Print some info for the user. */
3080 "%s: WaveLAN 2.00 recognised (frequency select). Current frequency = %ld\n",
3083 mmw_fee_data_h
<< 4) | (m
.mmw_fee_data_l
>> 4)) *
3087 /* We must now download the power adjust value (gain) to
3088 * the synthesizers (from the EEPROM - area 7 - DAC). */
3089 m
.mmw_fee_addr
= 0x61;
3090 m
.mmw_fee_ctrl
= MMW_FEE_CTRL_READ
| MMW_FEE_CTRL_DWLD
;
3091 mmc_write(ioaddr
, (char *) &m
.mmw_fee_ctrl
- (char *) &m
,
3092 (unsigned char *) &m
.mmw_fee_ctrl
, 2);
3094 /* Wait until the download is finished. */
3097 #ifdef DEBUG_CONFIG_TRACE
3098 printk(KERN_DEBUG
"%s: <-wv_mmc_init()\n", dev
->name
);
3103 /*------------------------------------------------------------------*/
3105 * Construct the fd and rbd structures.
3106 * Start the receive unit.
3107 * (called by wv_hw_reset())
3109 static int wv_ru_start(struct net_device
* dev
)
3111 net_local
*lp
= (net_local
*) dev
->priv
;
3112 unsigned long ioaddr
= dev
->base_addr
;
3120 #ifdef DEBUG_CONFIG_TRACE
3121 printk(KERN_DEBUG
"%s: ->wv_ru_start()\n", dev
->name
);
3124 obram_read(ioaddr
, scboff(OFFSET_SCB
, scb_status
),
3125 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
3126 if ((scb_cs
& SCB_ST_RUS
) == SCB_ST_RUS_RDY
)
3129 lp
->rx_head
= OFFSET_RU
;
3131 for (i
= 0, rx
= lp
->rx_head
; i
< NRXBLOCKS
; i
++, rx
= rx_next
) {
3133 (i
== NRXBLOCKS
- 1) ? lp
->rx_head
: rx
+ RXBLOCKZ
;
3136 fd
.fd_command
= (i
== NRXBLOCKS
- 1) ? FD_COMMAND_EL
: 0;
3137 fd
.fd_link_offset
= rx_next
;
3138 fd
.fd_rbd_offset
= rx
+ sizeof(fd
);
3139 obram_write(ioaddr
, rx
, (unsigned char *) &fd
, sizeof(fd
));
3142 rbd
.rbd_next_rbd_offset
= I82586NULL
;
3143 rbd
.rbd_bufl
= rx
+ sizeof(fd
) + sizeof(rbd
);
3145 rbd
.rbd_el_size
= RBD_EL
| (RBD_SIZE
& MAXDATAZ
);
3146 obram_write(ioaddr
, rx
+ sizeof(fd
),
3147 (unsigned char *) &rbd
, sizeof(rbd
));
3152 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_rfa_offset
),
3153 (unsigned char *) &lp
->rx_head
, sizeof(lp
->rx_head
));
3155 scb_cs
= SCB_CMD_RUC_GO
;
3156 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
3157 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
3159 set_chan_attn(ioaddr
, lp
->hacr
);
3161 for (i
= 1000; i
> 0; i
--) {
3162 obram_read(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
3163 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
3171 #ifdef DEBUG_CONFIG_ERROR
3173 "%s: wavelan_ru_start(): board not accepting command.\n",
3178 #ifdef DEBUG_CONFIG_TRACE
3179 printk(KERN_DEBUG
"%s: <-wv_ru_start()\n", dev
->name
);
3184 /*------------------------------------------------------------------*/
3186 * Initialise the transmit blocks.
3187 * Start the command unit executing the NOP
3188 * self-loop of the first transmit block.
3190 * Here we create the list of send buffers used to transmit packets
3191 * between the PC and the command unit. For each buffer, we create a
3192 * buffer descriptor (pointing on the buffer), a transmit command
3193 * (pointing to the buffer descriptor) and a NOP command.
3194 * The transmit command is linked to the NOP, and the NOP to itself.
3195 * When we will have finished executing the transmit command, we will
3196 * then loop on the NOP. By releasing the NOP link to a new command,
3197 * we may send another buffer.
3199 * (called by wv_hw_reset())
3201 static int wv_cu_start(struct net_device
* dev
)
3203 net_local
*lp
= (net_local
*) dev
->priv
;
3204 unsigned long ioaddr
= dev
->base_addr
;
3210 #ifdef DEBUG_CONFIG_TRACE
3211 printk(KERN_DEBUG
"%s: ->wv_cu_start()\n", dev
->name
);
3214 lp
->tx_first_free
= OFFSET_CU
;
3215 lp
->tx_first_in_use
= I82586NULL
;
3217 for (i
= 0, txblock
= OFFSET_CU
;
3218 i
< NTXBLOCKS
; i
++, txblock
+= TXBLOCKZ
) {
3222 unsigned short tx_addr
;
3223 unsigned short nop_addr
;
3224 unsigned short tbd_addr
;
3225 unsigned short buf_addr
;
3228 nop_addr
= tx_addr
+ sizeof(tx
);
3229 tbd_addr
= nop_addr
+ sizeof(nop
);
3230 buf_addr
= tbd_addr
+ sizeof(tbd
);
3232 tx
.tx_h
.ac_status
= 0;
3233 tx
.tx_h
.ac_command
= acmd_transmit
| AC_CFLD_I
;
3234 tx
.tx_h
.ac_link
= nop_addr
;
3235 tx
.tx_tbd_offset
= tbd_addr
;
3236 obram_write(ioaddr
, tx_addr
, (unsigned char *) &tx
,
3239 nop
.nop_h
.ac_status
= 0;
3240 nop
.nop_h
.ac_command
= acmd_nop
;
3241 nop
.nop_h
.ac_link
= nop_addr
;
3242 obram_write(ioaddr
, nop_addr
, (unsigned char *) &nop
,
3245 tbd
.tbd_status
= TBD_STATUS_EOF
;
3246 tbd
.tbd_next_bd_offset
= I82586NULL
;
3247 tbd
.tbd_bufl
= buf_addr
;
3249 obram_write(ioaddr
, tbd_addr
, (unsigned char *) &tbd
,
3254 OFFSET_CU
+ (NTXBLOCKS
- 1) * TXBLOCKZ
+ sizeof(ac_tx_t
);
3255 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_cbl_offset
),
3256 (unsigned char *) &first_nop
, sizeof(first_nop
));
3258 scb_cs
= SCB_CMD_CUC_GO
;
3259 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
3260 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
3262 set_chan_attn(ioaddr
, lp
->hacr
);
3264 for (i
= 1000; i
> 0; i
--) {
3265 obram_read(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
3266 (unsigned char *) &scb_cs
, sizeof(scb_cs
));
3274 #ifdef DEBUG_CONFIG_ERROR
3276 "%s: wavelan_cu_start(): board not accepting command.\n",
3282 lp
->tx_n_in_use
= 0;
3283 netif_start_queue(dev
);
3284 #ifdef DEBUG_CONFIG_TRACE
3285 printk(KERN_DEBUG
"%s: <-wv_cu_start()\n", dev
->name
);
3290 /*------------------------------------------------------------------*/
3292 * This routine does a standard configuration of the WaveLAN
3293 * controller (i82586).
3295 * It initialises the scp, iscp and scb structure
3296 * The first two are just pointers to the next.
3297 * The last one is used for basic configuration and for basic
3298 * communication (interrupt status).
3300 * (called by wv_hw_reset())
3302 static int wv_82586_start(struct net_device
* dev
)
3304 net_local
*lp
= (net_local
*) dev
->priv
;
3305 unsigned long ioaddr
= dev
->base_addr
;
3306 scp_t scp
; /* system configuration pointer */
3307 iscp_t iscp
; /* intermediate scp */
3308 scb_t scb
; /* system control block */
3309 ach_t cb
; /* Action command header */
3313 #ifdef DEBUG_CONFIG_TRACE
3314 printk(KERN_DEBUG
"%s: ->wv_82586_start()\n", dev
->name
);
3318 * Clear the onboard RAM.
3320 memset(&zeroes
[0], 0x00, sizeof(zeroes
));
3321 for (i
= 0; i
< I82586_MEMZ
; i
+= sizeof(zeroes
))
3322 obram_write(ioaddr
, i
, &zeroes
[0], sizeof(zeroes
));
3325 * Construct the command unit structures:
3326 * scp, iscp, scb, cb.
3328 memset(&scp
, 0x00, sizeof(scp
));
3329 scp
.scp_sysbus
= SCP_SY_16BBUS
;
3330 scp
.scp_iscpl
= OFFSET_ISCP
;
3331 obram_write(ioaddr
, OFFSET_SCP
, (unsigned char *) &scp
,
3334 memset(&iscp
, 0x00, sizeof(iscp
));
3336 iscp
.iscp_offset
= OFFSET_SCB
;
3337 obram_write(ioaddr
, OFFSET_ISCP
, (unsigned char *) &iscp
,
3340 /* Our first command is to reset the i82586. */
3341 memset(&scb
, 0x00, sizeof(scb
));
3342 scb
.scb_command
= SCB_CMD_RESET
;
3343 scb
.scb_cbl_offset
= OFFSET_CU
;
3344 scb
.scb_rfa_offset
= OFFSET_RU
;
3345 obram_write(ioaddr
, OFFSET_SCB
, (unsigned char *) &scb
,
3348 set_chan_attn(ioaddr
, lp
->hacr
);
3350 /* Wait for command to finish. */
3351 for (i
= 1000; i
> 0; i
--) {
3352 obram_read(ioaddr
, OFFSET_ISCP
, (unsigned char *) &iscp
,
3355 if (iscp
.iscp_busy
== (unsigned short) 0)
3362 #ifdef DEBUG_CONFIG_ERROR
3364 "%s: wv_82586_start(): iscp_busy timeout.\n",
3370 /* Check command completion. */
3371 for (i
= 15; i
> 0; i
--) {
3372 obram_read(ioaddr
, OFFSET_SCB
, (unsigned char *) &scb
,
3375 if (scb
.scb_status
== (SCB_ST_CX
| SCB_ST_CNA
))
3382 #ifdef DEBUG_CONFIG_ERROR
3384 "%s: wv_82586_start(): status: expected 0x%02x, got 0x%02x.\n",
3385 dev
->name
, SCB_ST_CX
| SCB_ST_CNA
, scb
.scb_status
);
3392 /* Set the action command header. */
3393 memset(&cb
, 0x00, sizeof(cb
));
3394 cb
.ac_command
= AC_CFLD_EL
| (AC_CFLD_CMD
& acmd_diagnose
);
3395 cb
.ac_link
= OFFSET_CU
;
3396 obram_write(ioaddr
, OFFSET_CU
, (unsigned char *) &cb
, sizeof(cb
));
3398 if (wv_synchronous_cmd(dev
, "diag()") == -1)
3401 obram_read(ioaddr
, OFFSET_CU
, (unsigned char *) &cb
, sizeof(cb
));
3402 if (cb
.ac_status
& AC_SFLD_FAIL
) {
3403 #ifdef DEBUG_CONFIG_ERROR
3405 "%s: wv_82586_start(): i82586 Self Test failed.\n",
3410 #ifdef DEBUG_I82586_SHOW
3411 wv_scb_show(ioaddr
);
3414 #ifdef DEBUG_CONFIG_TRACE
3415 printk(KERN_DEBUG
"%s: <-wv_82586_start()\n", dev
->name
);
3420 /*------------------------------------------------------------------*/
3422 * This routine does a standard configuration of the WaveLAN
3423 * controller (i82586).
3425 * This routine is a violent hack. We use the first free transmit block
3426 * to make our configuration. In the buffer area, we create the three
3427 * configuration commands (linked). We make the previous NOP point to
3428 * the beginning of the buffer instead of the tx command. After, we go
3429 * as usual to the NOP command.
3430 * Note that only the last command (mc_set) will generate an interrupt.
3432 * (called by wv_hw_reset(), wv_82586_reconfig(), wavelan_packet_xmit())
3434 static void wv_82586_config(struct net_device
* dev
)
3436 net_local
*lp
= (net_local
*) dev
->priv
;
3437 unsigned long ioaddr
= dev
->base_addr
;
3438 unsigned short txblock
;
3439 unsigned short txpred
;
3440 unsigned short tx_addr
;
3441 unsigned short nop_addr
;
3442 unsigned short tbd_addr
;
3443 unsigned short cfg_addr
;
3444 unsigned short ias_addr
;
3445 unsigned short mcs_addr
;
3448 ac_cfg_t cfg
; /* Configure action */
3449 ac_ias_t ias
; /* IA-setup action */
3450 ac_mcs_t mcs
; /* Multicast setup */
3451 struct dev_mc_list
*dmi
;
3453 #ifdef DEBUG_CONFIG_TRACE
3454 printk(KERN_DEBUG
"%s: ->wv_82586_config()\n", dev
->name
);
3457 /* Check nothing bad has happened */
3458 if (lp
->tx_n_in_use
== (NTXBLOCKS
- 1)) {
3459 #ifdef DEBUG_CONFIG_ERROR
3460 printk(KERN_INFO
"%s: wv_82586_config(): Tx queue full.\n",
3466 /* Calculate addresses of next block and previous block. */
3467 txblock
= lp
->tx_first_free
;
3468 txpred
= txblock
- TXBLOCKZ
;
3469 if (txpred
< OFFSET_CU
)
3470 txpred
+= NTXBLOCKS
* TXBLOCKZ
;
3471 lp
->tx_first_free
+= TXBLOCKZ
;
3472 if (lp
->tx_first_free
>= OFFSET_CU
+ NTXBLOCKS
* TXBLOCKZ
)
3473 lp
->tx_first_free
-= NTXBLOCKS
* TXBLOCKZ
;
3477 /* Calculate addresses of the different parts of the block. */
3479 nop_addr
= tx_addr
+ sizeof(tx
);
3480 tbd_addr
= nop_addr
+ sizeof(nop
);
3481 cfg_addr
= tbd_addr
+ sizeof(tbd_t
); /* beginning of the buffer */
3482 ias_addr
= cfg_addr
+ sizeof(cfg
);
3483 mcs_addr
= ias_addr
+ sizeof(ias
);
3488 tx
.tx_h
.ac_status
= 0xFFFF; /* Fake completion value */
3489 obram_write(ioaddr
, toff(ac_tx_t
, tx_addr
, tx_h
.ac_status
),
3490 (unsigned char *) &tx
.tx_h
.ac_status
,
3491 sizeof(tx
.tx_h
.ac_status
));
3496 nop
.nop_h
.ac_status
= 0;
3497 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_status
),
3498 (unsigned char *) &nop
.nop_h
.ac_status
,
3499 sizeof(nop
.nop_h
.ac_status
));
3500 nop
.nop_h
.ac_link
= nop_addr
;
3501 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_link
),
3502 (unsigned char *) &nop
.nop_h
.ac_link
,
3503 sizeof(nop
.nop_h
.ac_link
));
3505 /* Create a configure action. */
3506 memset(&cfg
, 0x00, sizeof(cfg
));
3509 * For Linux we invert AC_CFG_ALOC() so as to conform
3510 * to the way that net packets reach us from above.
3511 * (See also ac_tx_t.)
3513 * Updated from Wavelan Manual WCIN085B
3516 AC_CFG_BYTE_CNT(sizeof(ac_cfg_t
) - sizeof(ach_t
));
3517 cfg
.cfg_fifolim
= AC_CFG_FIFOLIM(4);
3518 cfg
.cfg_byte8
= AC_CFG_SAV_BF(1) | AC_CFG_SRDY(0);
3519 cfg
.cfg_byte9
= AC_CFG_ELPBCK(0) |
3521 AC_CFG_PRELEN(AC_CFG_PLEN_2
) |
3522 AC_CFG_ALOC(1) | AC_CFG_ADDRLEN(WAVELAN_ADDR_SIZE
);
3523 cfg
.cfg_byte10
= AC_CFG_BOFMET(1) |
3524 AC_CFG_ACR(6) | AC_CFG_LINPRIO(0);
3526 cfg
.cfg_slotl
= 0x0C;
3527 cfg
.cfg_byte13
= AC_CFG_RETRYNUM(15) | AC_CFG_SLTTMHI(0);
3528 cfg
.cfg_byte14
= AC_CFG_FLGPAD(0) |
3534 AC_CFG_BCDIS(0) | AC_CFG_PRM(lp
->promiscuous
);
3535 cfg
.cfg_byte15
= AC_CFG_ICDS(0) |
3536 AC_CFG_CDTF(0) | AC_CFG_ICSS(0) | AC_CFG_CSTF(0);
3538 cfg.cfg_min_frm_len = AC_CFG_MNFRM(64);
3540 cfg
.cfg_min_frm_len
= AC_CFG_MNFRM(8);
3542 cfg
.cfg_h
.ac_command
= (AC_CFLD_CMD
& acmd_configure
);
3543 cfg
.cfg_h
.ac_link
= ias_addr
;
3544 obram_write(ioaddr
, cfg_addr
, (unsigned char *) &cfg
, sizeof(cfg
));
3546 /* Set up the MAC address */
3547 memset(&ias
, 0x00, sizeof(ias
));
3548 ias
.ias_h
.ac_command
= (AC_CFLD_CMD
& acmd_ia_setup
);
3549 ias
.ias_h
.ac_link
= mcs_addr
;
3550 memcpy(&ias
.ias_addr
[0], (unsigned char *) &dev
->dev_addr
[0],
3551 sizeof(ias
.ias_addr
));
3552 obram_write(ioaddr
, ias_addr
, (unsigned char *) &ias
, sizeof(ias
));
3554 /* Initialize adapter's Ethernet multicast addresses */
3555 memset(&mcs
, 0x00, sizeof(mcs
));
3556 mcs
.mcs_h
.ac_command
= AC_CFLD_I
| (AC_CFLD_CMD
& acmd_mc_setup
);
3557 mcs
.mcs_h
.ac_link
= nop_addr
;
3558 mcs
.mcs_cnt
= WAVELAN_ADDR_SIZE
* lp
->mc_count
;
3559 obram_write(ioaddr
, mcs_addr
, (unsigned char *) &mcs
, sizeof(mcs
));
3561 /* Any address to set? */
3563 for (dmi
= dev
->mc_list
; dmi
; dmi
= dmi
->next
)
3564 outsw(PIOP1(ioaddr
), (u16
*) dmi
->dmi_addr
,
3565 WAVELAN_ADDR_SIZE
>> 1);
3567 #ifdef DEBUG_CONFIG_INFO
3569 DECLARE_MAC_BUF(mac
);
3571 "%s: wv_82586_config(): set %d multicast addresses:\n",
3572 dev
->name
, lp
->mc_count
);
3573 for (dmi
= dev
->mc_list
; dmi
; dmi
= dmi
->next
)
3574 printk(KERN_DEBUG
" %s\n",
3575 print_mac(mac
, dmi
->dmi_addr
));
3581 * Overwrite the predecessor NOP link
3582 * so that it points to the configure action.
3584 nop_addr
= txpred
+ sizeof(tx
);
3585 nop
.nop_h
.ac_status
= 0;
3586 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_status
),
3587 (unsigned char *) &nop
.nop_h
.ac_status
,
3588 sizeof(nop
.nop_h
.ac_status
));
3589 nop
.nop_h
.ac_link
= cfg_addr
;
3590 obram_write(ioaddr
, toff(ac_nop_t
, nop_addr
, nop_h
.ac_link
),
3591 (unsigned char *) &nop
.nop_h
.ac_link
,
3592 sizeof(nop
.nop_h
.ac_link
));
3594 /* Job done, clear the flag */
3595 lp
->reconfig_82586
= 0;
3597 if (lp
->tx_first_in_use
== I82586NULL
)
3598 lp
->tx_first_in_use
= txblock
;
3600 if (lp
->tx_n_in_use
== (NTXBLOCKS
- 1))
3601 netif_stop_queue(dev
);
3603 #ifdef DEBUG_CONFIG_TRACE
3604 printk(KERN_DEBUG
"%s: <-wv_82586_config()\n", dev
->name
);
3608 /*------------------------------------------------------------------*/
3610 * This routine, called by wavelan_close(), gracefully stops the
3611 * WaveLAN controller (i82586).
3612 * (called by wavelan_close())
3614 static void wv_82586_stop(struct net_device
* dev
)
3616 net_local
*lp
= (net_local
*) dev
->priv
;
3617 unsigned long ioaddr
= dev
->base_addr
;
3620 #ifdef DEBUG_CONFIG_TRACE
3621 printk(KERN_DEBUG
"%s: ->wv_82586_stop()\n", dev
->name
);
3624 /* Suspend both command unit and receive unit. */
3626 (SCB_CMD_CUC
& SCB_CMD_CUC_SUS
) | (SCB_CMD_RUC
&
3628 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
3629 (unsigned char *) &scb_cmd
, sizeof(scb_cmd
));
3630 set_chan_attn(ioaddr
, lp
->hacr
);
3632 /* No more interrupts */
3635 #ifdef DEBUG_CONFIG_TRACE
3636 printk(KERN_DEBUG
"%s: <-wv_82586_stop()\n", dev
->name
);
3640 /*------------------------------------------------------------------*/
3642 * Totally reset the WaveLAN and restart it.
3643 * Performs the following actions:
3644 * 1. A power reset (reset DMA)
3645 * 2. Initialize the radio modem (using wv_mmc_init)
3646 * 3. Reset & Configure LAN controller (using wv_82586_start)
3647 * 4. Start the LAN controller's command unit
3648 * 5. Start the LAN controller's receive unit
3649 * (called by wavelan_interrupt(), wavelan_watchdog() & wavelan_open())
3651 static int wv_hw_reset(struct net_device
* dev
)
3653 net_local
*lp
= (net_local
*) dev
->priv
;
3654 unsigned long ioaddr
= dev
->base_addr
;
3656 #ifdef DEBUG_CONFIG_TRACE
3657 printk(KERN_DEBUG
"%s: ->wv_hw_reset(dev=0x%x)\n", dev
->name
,
3658 (unsigned int) dev
);
3661 /* Increase the number of resets done. */
3664 wv_hacr_reset(ioaddr
);
3665 lp
->hacr
= HACR_DEFAULT
;
3667 if ((wv_mmc_init(dev
) < 0) || (wv_82586_start(dev
) < 0))
3670 /* Enable the card to send interrupts. */
3673 /* Start card functions */
3674 if (wv_cu_start(dev
) < 0)
3677 /* Setup the controller and parameters */
3678 wv_82586_config(dev
);
3680 /* Finish configuration with the receive unit */
3681 if (wv_ru_start(dev
) < 0)
3684 #ifdef DEBUG_CONFIG_TRACE
3685 printk(KERN_DEBUG
"%s: <-wv_hw_reset()\n", dev
->name
);
3690 /*------------------------------------------------------------------*/
3692 * Check if there is a WaveLAN at the specific base address.
3693 * As a side effect, this reads the MAC address.
3694 * (called in wavelan_probe() and init_module())
3696 static int wv_check_ioaddr(unsigned long ioaddr
, u8
* mac
)
3698 int i
; /* Loop counter */
3700 /* Check if the base address if available. */
3701 if (!request_region(ioaddr
, sizeof(ha_t
), "wavelan probe"))
3702 return -EBUSY
; /* ioaddr already used */
3704 /* Reset host interface */
3705 wv_hacr_reset(ioaddr
);
3707 /* Read the MAC address from the parameter storage area. */
3708 psa_read(ioaddr
, HACR_DEFAULT
, psaoff(0, psa_univ_mac_addr
),
3711 release_region(ioaddr
, sizeof(ha_t
));
3714 * Check the first three octets of the address for the manufacturer's code.
3715 * Note: if this can't find your WaveLAN card, you've got a
3716 * non-NCR/AT&T/Lucent ISA card. See wavelan.p.h for detail on
3717 * how to configure your card.
3719 for (i
= 0; i
< ARRAY_SIZE(MAC_ADDRESSES
); i
++)
3720 if ((mac
[0] == MAC_ADDRESSES
[i
][0]) &&
3721 (mac
[1] == MAC_ADDRESSES
[i
][1]) &&
3722 (mac
[2] == MAC_ADDRESSES
[i
][2]))
3725 #ifdef DEBUG_CONFIG_INFO
3727 "WaveLAN (0x%3X): your MAC address might be %02X:%02X:%02X.\n",
3728 ioaddr
, mac
[0], mac
[1], mac
[2]);
3733 /************************ INTERRUPT HANDLING ************************/
3736 * This function is the interrupt handler for the WaveLAN card. This
3737 * routine will be called whenever:
3739 static irqreturn_t
wavelan_interrupt(int irq
, void *dev_id
)
3741 struct net_device
*dev
;
3742 unsigned long ioaddr
;
3750 #ifdef DEBUG_INTERRUPT_TRACE
3751 printk(KERN_DEBUG
"%s: ->wavelan_interrupt()\n", dev
->name
);
3754 lp
= (net_local
*) dev
->priv
;
3755 ioaddr
= dev
->base_addr
;
3757 #ifdef DEBUG_INTERRUPT_INFO
3758 /* Check state of our spinlock */
3759 if(spin_is_locked(&lp
->spinlock
))
3761 "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
3765 /* Prevent reentrancy. We need to do that because we may have
3766 * multiple interrupt handler running concurrently.
3767 * It is safe because interrupts are disabled before acquiring
3769 spin_lock(&lp
->spinlock
);
3771 /* We always had spurious interrupts at startup, but lately I
3772 * saw them comming *between* the request_irq() and the
3773 * spin_lock_irqsave() in wavelan_open(), so the spinlock
3774 * protection is no enough.
3775 * So, we also check lp->hacr that will tell us is we enabled
3776 * irqs or not (see wv_ints_on()).
3777 * We can't use netif_running(dev) because we depend on the
3778 * proper processing of the irq generated during the config. */
3780 /* Which interrupt it is ? */
3781 hasr
= hasr_read(ioaddr
);
3783 #ifdef DEBUG_INTERRUPT_INFO
3785 "%s: wavelan_interrupt(): hasr 0x%04x; hacr 0x%04x.\n",
3786 dev
->name
, hasr
, lp
->hacr
);
3789 /* Check modem interrupt */
3790 if ((hasr
& HASR_MMC_INTR
) && (lp
->hacr
& HACR_MMC_INT_ENABLE
)) {
3794 * Interrupt from the modem management controller.
3795 * This will clear it -- ignored for now.
3797 mmc_read(ioaddr
, mmroff(0, mmr_dce_status
), &dce_status
,
3798 sizeof(dce_status
));
3800 #ifdef DEBUG_INTERRUPT_ERROR
3802 "%s: wavelan_interrupt(): unexpected mmc interrupt: status 0x%04x.\n",
3803 dev
->name
, dce_status
);
3807 /* Check if not controller interrupt */
3808 if (((hasr
& HASR_82586_INTR
) == 0) ||
3809 ((lp
->hacr
& HACR_82586_INT_ENABLE
) == 0)) {
3810 #ifdef DEBUG_INTERRUPT_ERROR
3812 "%s: wavelan_interrupt(): interrupt not coming from i82586 - hasr 0x%04x.\n",
3815 spin_unlock (&lp
->spinlock
);
3819 /* Read interrupt data. */
3820 obram_read(ioaddr
, scboff(OFFSET_SCB
, scb_status
),
3821 (unsigned char *) &status
, sizeof(status
));
3824 * Acknowledge the interrupt(s).
3826 ack_cmd
= status
& SCB_ST_INT
;
3827 obram_write(ioaddr
, scboff(OFFSET_SCB
, scb_command
),
3828 (unsigned char *) &ack_cmd
, sizeof(ack_cmd
));
3829 set_chan_attn(ioaddr
, lp
->hacr
);
3831 #ifdef DEBUG_INTERRUPT_INFO
3832 printk(KERN_DEBUG
"%s: wavelan_interrupt(): status 0x%04x.\n",
3836 /* Command completed. */
3837 if ((status
& SCB_ST_CX
) == SCB_ST_CX
) {
3838 #ifdef DEBUG_INTERRUPT_INFO
3840 "%s: wavelan_interrupt(): command completed.\n",
3843 wv_complete(dev
, ioaddr
, lp
);
3846 /* Frame received. */
3847 if ((status
& SCB_ST_FR
) == SCB_ST_FR
) {
3848 #ifdef DEBUG_INTERRUPT_INFO
3850 "%s: wavelan_interrupt(): received packet.\n",
3856 /* Check the state of the command unit. */
3857 if (((status
& SCB_ST_CNA
) == SCB_ST_CNA
) ||
3858 (((status
& SCB_ST_CUS
) != SCB_ST_CUS_ACTV
) &&
3859 (netif_running(dev
)))) {
3860 #ifdef DEBUG_INTERRUPT_ERROR
3862 "%s: wavelan_interrupt(): CU inactive -- restarting\n",
3868 /* Check the state of the command unit. */
3869 if (((status
& SCB_ST_RNR
) == SCB_ST_RNR
) ||
3870 (((status
& SCB_ST_RUS
) != SCB_ST_RUS_RDY
) &&
3871 (netif_running(dev
)))) {
3872 #ifdef DEBUG_INTERRUPT_ERROR
3874 "%s: wavelan_interrupt(): RU not ready -- restarting\n",
3880 /* Release spinlock */
3881 spin_unlock (&lp
->spinlock
);
3883 #ifdef DEBUG_INTERRUPT_TRACE
3884 printk(KERN_DEBUG
"%s: <-wavelan_interrupt()\n", dev
->name
);
3889 /*------------------------------------------------------------------*/
3891 * Watchdog: when we start a transmission, a timer is set for us in the
3892 * kernel. If the transmission completes, this timer is disabled. If
3893 * the timer expires, we are called and we try to unlock the hardware.
3895 static void wavelan_watchdog(struct net_device
* dev
)
3897 net_local
* lp
= (net_local
*)dev
->priv
;
3898 u_long ioaddr
= dev
->base_addr
;
3899 unsigned long flags
;
3900 unsigned int nreaped
;
3902 #ifdef DEBUG_INTERRUPT_TRACE
3903 printk(KERN_DEBUG
"%s: ->wavelan_watchdog()\n", dev
->name
);
3906 #ifdef DEBUG_INTERRUPT_ERROR
3907 printk(KERN_INFO
"%s: wavelan_watchdog: watchdog timer expired\n",
3911 /* Check that we came here for something */
3912 if (lp
->tx_n_in_use
<= 0) {
3916 spin_lock_irqsave(&lp
->spinlock
, flags
);
3918 /* Try to see if some buffers are not free (in case we missed
3920 nreaped
= wv_complete(dev
, ioaddr
, lp
);
3922 #ifdef DEBUG_INTERRUPT_INFO
3924 "%s: wavelan_watchdog(): %d reaped, %d remain.\n",
3925 dev
->name
, nreaped
, lp
->tx_n_in_use
);
3928 #ifdef DEBUG_PSA_SHOW
3931 psa_read(dev
, 0, (unsigned char *) &psa
, sizeof(psa
));
3935 #ifdef DEBUG_MMC_SHOW
3938 #ifdef DEBUG_I82586_SHOW
3942 /* If no buffer has been freed */
3944 #ifdef DEBUG_INTERRUPT_ERROR
3946 "%s: wavelan_watchdog(): cleanup failed, trying reset\n",
3952 /* At this point, we should have some free Tx buffer ;-) */
3953 if (lp
->tx_n_in_use
< NTXBLOCKS
- 1)
3954 netif_wake_queue(dev
);
3956 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
3958 #ifdef DEBUG_INTERRUPT_TRACE
3959 printk(KERN_DEBUG
"%s: <-wavelan_watchdog()\n", dev
->name
);
3963 /********************* CONFIGURATION CALLBACKS *********************/
3965 * Here are the functions called by the Linux networking code (NET3)
3966 * for initialization, configuration and deinstallations of the
3967 * WaveLAN ISA hardware.
3970 /*------------------------------------------------------------------*/
3972 * Configure and start up the WaveLAN PCMCIA adaptor.
3973 * Called by NET3 when it "opens" the device.
3975 static int wavelan_open(struct net_device
* dev
)
3977 net_local
* lp
= (net_local
*)dev
->priv
;
3978 unsigned long flags
;
3980 #ifdef DEBUG_CALLBACK_TRACE
3981 printk(KERN_DEBUG
"%s: ->wavelan_open(dev=0x%x)\n", dev
->name
,
3982 (unsigned int) dev
);
3986 if (dev
->irq
== 0) {
3987 #ifdef DEBUG_CONFIG_ERROR
3988 printk(KERN_WARNING
"%s: wavelan_open(): no IRQ\n",
3994 if (request_irq(dev
->irq
, &wavelan_interrupt
, 0, "WaveLAN", dev
) != 0)
3996 #ifdef DEBUG_CONFIG_ERROR
3997 printk(KERN_WARNING
"%s: wavelan_open(): invalid IRQ\n",
4003 spin_lock_irqsave(&lp
->spinlock
, flags
);
4005 if (wv_hw_reset(dev
) != -1) {
4006 netif_start_queue(dev
);
4008 free_irq(dev
->irq
, dev
);
4009 #ifdef DEBUG_CONFIG_ERROR
4011 "%s: wavelan_open(): impossible to start the card\n",
4014 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
4017 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
4019 #ifdef DEBUG_CALLBACK_TRACE
4020 printk(KERN_DEBUG
"%s: <-wavelan_open()\n", dev
->name
);
4025 /*------------------------------------------------------------------*/
4027 * Shut down the WaveLAN ISA card.
4028 * Called by NET3 when it "closes" the device.
4030 static int wavelan_close(struct net_device
* dev
)
4032 net_local
*lp
= (net_local
*) dev
->priv
;
4033 unsigned long flags
;
4035 #ifdef DEBUG_CALLBACK_TRACE
4036 printk(KERN_DEBUG
"%s: ->wavelan_close(dev=0x%x)\n", dev
->name
,
4037 (unsigned int) dev
);
4040 netif_stop_queue(dev
);
4043 * Flush the Tx and disable Rx.
4045 spin_lock_irqsave(&lp
->spinlock
, flags
);
4047 spin_unlock_irqrestore(&lp
->spinlock
, flags
);
4049 free_irq(dev
->irq
, dev
);
4051 #ifdef DEBUG_CALLBACK_TRACE
4052 printk(KERN_DEBUG
"%s: <-wavelan_close()\n", dev
->name
);
4057 /*------------------------------------------------------------------*/
4059 * Probe an I/O address, and if the WaveLAN is there configure the
4061 * (called by wavelan_probe() and via init_module()).
4063 static int __init
wavelan_config(struct net_device
*dev
, unsigned short ioaddr
)
4071 if (!request_region(ioaddr
, sizeof(ha_t
), "wavelan"))
4074 err
= wv_check_ioaddr(ioaddr
, mac
);
4078 memcpy(dev
->dev_addr
, mac
, 6);
4080 dev
->base_addr
= ioaddr
;
4082 #ifdef DEBUG_CALLBACK_TRACE
4083 printk(KERN_DEBUG
"%s: ->wavelan_config(dev=0x%x, ioaddr=0x%lx)\n",
4084 dev
->name
, (unsigned int) dev
, ioaddr
);
4087 /* Check IRQ argument on command line. */
4088 if (dev
->irq
!= 0) {
4089 irq_mask
= wv_irq_to_psa(dev
->irq
);
4091 if (irq_mask
== 0) {
4092 #ifdef DEBUG_CONFIG_ERROR
4094 "%s: wavelan_config(): invalid IRQ %d ignored.\n",
4095 dev
->name
, dev
->irq
);
4099 #ifdef DEBUG_CONFIG_INFO
4101 "%s: wavelan_config(): changing IRQ to %d\n",
4102 dev
->name
, dev
->irq
);
4104 psa_write(ioaddr
, HACR_DEFAULT
,
4105 psaoff(0, psa_int_req_no
), &irq_mask
, 1);
4106 /* update the Wavelan checksum */
4107 update_psa_checksum(dev
, ioaddr
, HACR_DEFAULT
);
4108 wv_hacr_reset(ioaddr
);
4112 psa_read(ioaddr
, HACR_DEFAULT
, psaoff(0, psa_int_req_no
),
4114 if ((irq
= wv_psa_to_irq(irq_mask
)) == -1) {
4115 #ifdef DEBUG_CONFIG_ERROR
4117 "%s: wavelan_config(): could not wavelan_map_irq(%d).\n",
4118 dev
->name
, irq_mask
);
4126 dev
->mem_start
= 0x0000;
4127 dev
->mem_end
= 0x0000;
4130 /* Initialize device structures */
4131 memset(dev
->priv
, 0, sizeof(net_local
));
4132 lp
= (net_local
*) dev
->priv
;
4134 /* Back link to the device structure. */
4136 /* Add the device at the beginning of the linked list. */
4137 lp
->next
= wavelan_list
;
4140 lp
->hacr
= HACR_DEFAULT
;
4142 /* Multicast stuff */
4143 lp
->promiscuous
= 0;
4147 spin_lock_init(&lp
->spinlock
);
4149 dev
->open
= wavelan_open
;
4150 dev
->stop
= wavelan_close
;
4151 dev
->hard_start_xmit
= wavelan_packet_xmit
;
4152 dev
->get_stats
= wavelan_get_stats
;
4153 dev
->set_multicast_list
= &wavelan_set_multicast_list
;
4154 dev
->tx_timeout
= &wavelan_watchdog
;
4155 dev
->watchdog_timeo
= WATCHDOG_JIFFIES
;
4156 #ifdef SET_MAC_ADDRESS
4157 dev
->set_mac_address
= &wavelan_set_mac_address
;
4158 #endif /* SET_MAC_ADDRESS */
4160 dev
->wireless_handlers
= &wavelan_handler_def
;
4161 lp
->wireless_data
.spy_data
= &lp
->spy_data
;
4162 dev
->wireless_data
= &lp
->wireless_data
;
4164 dev
->mtu
= WAVELAN_MTU
;
4166 /* Display nice information. */
4169 #ifdef DEBUG_CALLBACK_TRACE
4170 printk(KERN_DEBUG
"%s: <-wavelan_config()\n", dev
->name
);
4174 release_region(ioaddr
, sizeof(ha_t
));
4178 /*------------------------------------------------------------------*/
4180 * Check for a network adaptor of this type. Return '0' iff one
4181 * exists. There seem to be different interpretations of
4182 * the initial value of dev->base_addr.
4183 * We follow the example in drivers/net/ne.c.
4184 * (called in "Space.c")
4186 struct net_device
* __init
wavelan_probe(int unit
)
4188 struct net_device
*dev
;
4194 /* compile-time check the sizes of structures */
4195 BUILD_BUG_ON(sizeof(psa_t
) != PSA_SIZE
);
4196 BUILD_BUG_ON(sizeof(mmw_t
) != MMW_SIZE
);
4197 BUILD_BUG_ON(sizeof(mmr_t
) != MMR_SIZE
);
4198 BUILD_BUG_ON(sizeof(ha_t
) != HA_SIZE
);
4200 dev
= alloc_etherdev(sizeof(net_local
));
4202 return ERR_PTR(-ENOMEM
);
4204 sprintf(dev
->name
, "eth%d", unit
);
4205 netdev_boot_setup_check(dev
);
4206 base_addr
= dev
->base_addr
;
4209 #ifdef DEBUG_CALLBACK_TRACE
4211 "%s: ->wavelan_probe(dev=%p (base_addr=0x%x))\n",
4212 dev
->name
, dev
, (unsigned int) dev
->base_addr
);
4215 /* Don't probe at all. */
4216 if (base_addr
< 0) {
4217 #ifdef DEBUG_CONFIG_ERROR
4219 "%s: wavelan_probe(): invalid base address\n",
4223 } else if (base_addr
> 0x100) { /* Check a single specified location. */
4224 r
= wavelan_config(dev
, base_addr
);
4225 #ifdef DEBUG_CONFIG_INFO
4228 "%s: wavelan_probe(): no device at specified base address (0x%X) or address already in use\n",
4229 dev
->name
, base_addr
);
4232 #ifdef DEBUG_CALLBACK_TRACE
4233 printk(KERN_DEBUG
"%s: <-wavelan_probe()\n", dev
->name
);
4235 } else { /* Scan all possible addresses of the WaveLAN hardware. */
4236 for (i
= 0; i
< ARRAY_SIZE(iobase
); i
++) {
4238 if (wavelan_config(dev
, iobase
[i
]) == 0) {
4239 #ifdef DEBUG_CALLBACK_TRACE
4241 "%s: <-wavelan_probe()\n",
4247 if (i
== ARRAY_SIZE(iobase
))
4252 r
= register_netdev(dev
);
4257 release_region(dev
->base_addr
, sizeof(ha_t
));
4258 wavelan_list
= wavelan_list
->next
;
4264 /****************************** MODULE ******************************/
4266 * Module entry point: insertion and removal
4270 /*------------------------------------------------------------------*/
4272 * Insertion of the module
4273 * I'm now quite proud of the multi-device support.
4275 int __init
init_module(void)
4277 int ret
= -EIO
; /* Return error if no cards found */
4280 #ifdef DEBUG_MODULE_TRACE
4281 printk(KERN_DEBUG
"-> init_module()\n");
4284 /* If probing is asked */
4286 #ifdef DEBUG_CONFIG_ERROR
4288 "WaveLAN init_module(): doing device probing (bad !)\n");
4290 "Specify base addresses while loading module to correct the problem\n");
4293 /* Copy the basic set of address to be probed. */
4294 for (i
= 0; i
< ARRAY_SIZE(iobase
); i
++)
4299 /* Loop on all possible base addresses. */
4301 while ((io
[++i
] != 0) && (i
< ARRAY_SIZE(io
))) {
4302 struct net_device
*dev
= alloc_etherdev(sizeof(net_local
));
4306 strcpy(dev
->name
, name
[i
]); /* Copy name */
4307 dev
->base_addr
= io
[i
];
4310 /* Check if there is something at this base address. */
4311 if (wavelan_config(dev
, io
[i
]) == 0) {
4312 if (register_netdev(dev
) != 0) {
4313 release_region(dev
->base_addr
, sizeof(ha_t
));
4314 wavelan_list
= wavelan_list
->next
;
4323 #ifdef DEBUG_CONFIG_ERROR
4326 "WaveLAN init_module(): no device found\n");
4329 #ifdef DEBUG_MODULE_TRACE
4330 printk(KERN_DEBUG
"<- init_module()\n");
4335 /*------------------------------------------------------------------*/
4337 * Removal of the module
4339 void cleanup_module(void)
4341 #ifdef DEBUG_MODULE_TRACE
4342 printk(KERN_DEBUG
"-> cleanup_module()\n");
4345 /* Loop on all devices and release them. */
4346 while (wavelan_list
) {
4347 struct net_device
*dev
= wavelan_list
->dev
;
4349 #ifdef DEBUG_CONFIG_INFO
4351 "%s: cleanup_module(): removing device at 0x%x\n",
4352 dev
->name
, (unsigned int) dev
);
4354 unregister_netdev(dev
);
4356 release_region(dev
->base_addr
, sizeof(ha_t
));
4357 wavelan_list
= wavelan_list
->next
;
4362 #ifdef DEBUG_MODULE_TRACE
4363 printk(KERN_DEBUG
"<- cleanup_module()\n");
4367 MODULE_LICENSE("GPL");
4370 * This software may only be used and distributed
4371 * according to the terms of the GNU General Public License.
4373 * This software was developed as a component of the
4374 * Linux operating system.
4375 * It is based on other device drivers and information
4376 * either written or supplied by:
4377 * Ajay Bakre (bakre@paul.rutgers.edu),
4378 * Donald Becker (becker@scyld.com),
4379 * Loeke Brederveld (Loeke.Brederveld@Utrecht.NCR.com),
4380 * Anders Klemets (klemets@it.kth.se),
4381 * Vladimir V. Kolpakov (w@stier.koenig.ru),
4382 * Marc Meertens (Marc.Meertens@Utrecht.NCR.com),
4383 * Pauline Middelink (middelin@polyware.iaf.nl),
4384 * Robert Morris (rtm@das.harvard.edu),
4385 * Jean Tourrilhes (jt@hplb.hpl.hp.com),
4386 * Girish Welling (welling@paul.rutgers.edu),
4388 * Thanks go also to:
4389 * James Ashton (jaa101@syseng.anu.edu.au),
4390 * Alan Cox (alan@redhat.com),
4391 * Allan Creighton (allanc@cs.usyd.edu.au),
4392 * Matthew Geier (matthew@cs.usyd.edu.au),
4393 * Remo di Giovanni (remo@cs.usyd.edu.au),
4394 * Eckhard Grah (grah@wrcs1.urz.uni-wuppertal.de),
4395 * Vipul Gupta (vgupta@cs.binghamton.edu),
4396 * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
4397 * Tim Nicholson (tim@cs.usyd.edu.au),
4398 * Ian Parkin (ian@cs.usyd.edu.au),
4399 * John Rosenberg (johnr@cs.usyd.edu.au),
4400 * George Rossi (george@phm.gov.au),
4401 * Arthur Scott (arthur@cs.usyd.edu.au),
4403 * for their assistance and advice.
4405 * Please send bug reports, updates, comments to:
4407 * Bruce Janson Email: bruce@cs.usyd.edu.au
4408 * Basser Department of Computer Science Phone: +61-2-9351-3423
4409 * University of Sydney, N.S.W., 2006, AUSTRALIA Fax: +61-2-9351-3838