| blob | 27c9203d8ce3173bff55753e1882a651faf11bc6 |
1 /*
2 * File: mca_asm.h
3 *
4 * Copyright (C) 1999 Silicon Graphics, Inc.
5 * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
6 * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
7 * Copyright (C) 2000 Hewlett-Packard Co.
8 * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
9 * Copyright (C) 2002 Intel Corp.
10 * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
11 * Copyright (C) 2005 Silicon Graphics, Inc
12 * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
13 */
14 #ifndef _ASM_IA64_MCA_ASM_H
15 #define _ASM_IA64_MCA_ASM_H
17 #define PSR_IC 13
18 #define PSR_I 14
19 #define PSR_DT 17
20 #define PSR_RT 27
21 #define PSR_MC 35
22 #define PSR_IT 36
23 #define PSR_BN 44
25 /*
26 * This macro converts a instruction virtual address to a physical address
27 * Right now for simulation purposes the virtual addresses are
28 * direct mapped to physical addresses.
29 * 1. Lop off bits 61 thru 63 in the virtual address
30 */
31 #define INST_VA_TO_PA(addr) \
32 dep addr = 0, addr, 61, 3
33 /*
34 * This macro converts a data virtual address to a physical address
35 * Right now for simulation purposes the virtual addresses are
36 * direct mapped to physical addresses.
37 * 1. Lop off bits 61 thru 63 in the virtual address
38 */
39 #define DATA_VA_TO_PA(addr) \
40 tpa addr = addr
41 /*
42 * This macro converts a data physical address to a virtual address
43 * Right now for simulation purposes the virtual addresses are
44 * direct mapped to physical addresses.
45 * 1. Put 0x7 in bits 61 thru 63.
46 */
47 #define DATA_PA_TO_VA(addr,temp) \
48 mov temp = 0x7 ;; \
49 dep addr = temp, addr, 61, 3
51 #define GET_THIS_PADDR(reg, var) \
52 mov reg = IA64_KR(PER_CPU_DATA);; \
53 addl reg = THIS_CPU(var), reg
55 /*
56 * This macro jumps to the instruction at the given virtual address
57 * and starts execution in physical mode with all the address
58 * translations turned off.
59 * 1. Save the current psr
60 * 2. Make sure that all the upper 32 bits are off
61 *
62 * 3. Clear the interrupt enable and interrupt state collection bits
63 * in the psr before updating the ipsr and iip.
64 *
65 * 4. Turn off the instruction, data and rse translation bits of the psr
66 * and store the new value into ipsr
67 * Also make sure that the interrupts are disabled.
68 * Ensure that we are in little endian mode.
69 * [psr.{rt, it, dt, i, be} = 0]
70 *
71 * 5. Get the physical address corresponding to the virtual address
72 * of the next instruction bundle and put it in iip.
73 * (Using magic numbers 24 and 40 in the deposint instruction since
74 * the IA64_SDK code directly maps to lower 24bits as physical address
75 * from a virtual address).
76 *
77 * 6. Do an rfi to move the values from ipsr to psr and iip to ip.
78 */
79 #define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
80 mov old_psr = psr; \
81 ;; \
82 dep old_psr = 0, old_psr, 32, 32; \
83 \
84 mov ar.rsc = 0 ; \
85 ;; \
86 srlz.d; \
87 mov temp2 = ar.bspstore; \
88 ;; \
89 DATA_VA_TO_PA(temp2); \
90 ;; \
91 mov temp1 = ar.rnat; \
92 ;; \
93 mov ar.bspstore = temp2; \
94 ;; \
95 mov ar.rnat = temp1; \
96 mov temp1 = psr; \
97 mov temp2 = psr; \
98 ;; \
99 \
100 dep temp2 = 0, temp2, PSR_IC, 2; \
101 ;; \
102 mov psr.l = temp2; \
103 ;; \
104 srlz.d; \
105 dep temp1 = 0, temp1, 32, 32; \
106 ;; \
107 dep temp1 = 0, temp1, PSR_IT, 1; \
108 ;; \
109 dep temp1 = 0, temp1, PSR_DT, 1; \
110 ;; \
111 dep temp1 = 0, temp1, PSR_RT, 1; \
112 ;; \
113 dep temp1 = 0, temp1, PSR_I, 1; \
114 ;; \
115 dep temp1 = 0, temp1, PSR_IC, 1; \
116 ;; \
117 dep temp1 = -1, temp1, PSR_MC, 1; \
118 ;; \
119 mov cr.ipsr = temp1; \
120 ;; \
121 LOAD_PHYSICAL(p0, temp2, start_addr); \
122 ;; \
123 mov cr.iip = temp2; \
124 mov cr.ifs = r0; \
125 DATA_VA_TO_PA(sp); \
126 DATA_VA_TO_PA(gp); \
127 ;; \
128 srlz.i; \
129 ;; \
130 nop 1; \
131 nop 2; \
132 nop 1; \
133 nop 2; \
134 rfi; \
135 ;;
137 /*
138 * This macro jumps to the instruction at the given virtual address
139 * and starts execution in virtual mode with all the address
140 * translations turned on.
141 * 1. Get the old saved psr
142 *
143 * 2. Clear the interrupt state collection bit in the current psr.
144 *
145 * 3. Set the instruction translation bit back in the old psr
146 * Note we have to do this since we are right now saving only the
147 * lower 32-bits of old psr.(Also the old psr has the data and
148 * rse translation bits on)
149 *
150 * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1.
151 *
152 * 5. Reset the current thread pointer (r13).
153 *
154 * 6. Set iip to the virtual address of the next instruction bundle.
155 *
156 * 7. Do an rfi to move ipsr to psr and iip to ip.
157 */
159 #define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
160 mov temp2 = psr; \
161 ;; \
162 mov old_psr = temp2; \
163 ;; \
164 dep temp2 = 0, temp2, PSR_IC, 2; \
165 ;; \
166 mov psr.l = temp2; \
167 mov ar.rsc = 0; \
168 ;; \
169 srlz.d; \
170 mov r13 = ar.k6; \
171 mov temp2 = ar.bspstore; \
172 ;; \
173 DATA_PA_TO_VA(temp2,temp1); \
174 ;; \
175 mov temp1 = ar.rnat; \
176 ;; \
177 mov ar.bspstore = temp2; \
178 ;; \
179 mov ar.rnat = temp1; \
180 ;; \
181 mov temp1 = old_psr; \
182 ;; \
183 mov temp2 = 1; \
184 ;; \
185 dep temp1 = temp2, temp1, PSR_IC, 1; \
186 ;; \
187 dep temp1 = temp2, temp1, PSR_IT, 1; \
188 ;; \
189 dep temp1 = temp2, temp1, PSR_DT, 1; \
190 ;; \
191 dep temp1 = temp2, temp1, PSR_RT, 1; \
192 ;; \
193 dep temp1 = temp2, temp1, PSR_BN, 1; \
194 ;; \
195 \
196 mov cr.ipsr = temp1; \
197 movl temp2 = start_addr; \
198 ;; \
199 mov cr.iip = temp2; \
200 ;; \
201 DATA_PA_TO_VA(sp, temp1); \
202 DATA_PA_TO_VA(gp, temp2); \
203 srlz.i; \
204 ;; \
205 nop 1; \
206 nop 2; \
207 nop 1; \
208 rfi \
209 ;;
211 /*
212 * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
213 * stacks, except that the SAL/OS state and a switch_stack are stored near the
214 * top of the MCA/INIT stack. To support concurrent entry to MCA or INIT, as
215 * well as MCA over INIT, each event needs its own SAL/OS state. All entries
216 * are 16 byte aligned.
217 *
218 * +---------------------------+
219 * | pt_regs |
220 * +---------------------------+
221 * | switch_stack |
222 * +---------------------------+
223 * | SAL/OS state |
224 * +---------------------------+
225 * | 16 byte scratch area |
226 * +---------------------------+ <-------- SP at start of C MCA handler
227 * | ..... |
228 * +---------------------------+
229 * | RBS for MCA/INIT handler |
230 * +---------------------------+
231 * | struct task for MCA/INIT |
232 * +---------------------------+ <-------- Bottom of MCA/INIT stack
233 */
235 #define ALIGN16(x) ((x)&~15)
236 #define MCA_PT_REGS_OFFSET ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
237 #define MCA_SWITCH_STACK_OFFSET ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
238 #define MCA_SOS_OFFSET ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
239 #define MCA_SP_OFFSET ALIGN16(MCA_SOS_OFFSET-16)