[ARM] pxa: Gumstix Verdex PCMCIA support
[linux-2.6/verdex.git] / drivers / acpi / acpica / aclocal.h
blob81e64f478679be04dafdb1a1786e34e72906c310
1 /******************************************************************************
3 * Name: aclocal.h - Internal data types used across the ACPI subsystem
5 *****************************************************************************/
7 /*
8 * Copyright (C) 2000 - 2008, Intel Corp.
9 * All rights reserved.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #ifndef __ACLOCAL_H__
45 #define __ACLOCAL_H__
47 /* acpisrc:struct_defs -- for acpisrc conversion */
49 #define ACPI_SERIALIZED 0xFF
51 typedef u32 acpi_mutex_handle;
52 #define ACPI_GLOBAL_LOCK (acpi_semaphore) (-1)
54 /* Total number of aml opcodes defined */
56 #define AML_NUM_OPCODES 0x7F
58 /* Forward declarations */
60 struct acpi_walk_state;
61 struct acpi_obj_mutex;
62 union acpi_parse_object;
64 /*****************************************************************************
66 * Mutex typedefs and structs
68 ****************************************************************************/
71 * Predefined handles for the mutex objects used within the subsystem
72 * All mutex objects are automatically created by acpi_ut_mutex_initialize.
74 * The acquire/release ordering protocol is implied via this list. Mutexes
75 * with a lower value must be acquired before mutexes with a higher value.
77 * NOTE: any changes here must be reflected in the acpi_gbl_mutex_names
78 * table below also!
80 #define ACPI_MTX_INTERPRETER 0 /* AML Interpreter, main lock */
81 #define ACPI_MTX_NAMESPACE 1 /* ACPI Namespace */
82 #define ACPI_MTX_TABLES 2 /* Data for ACPI tables */
83 #define ACPI_MTX_EVENTS 3 /* Data for ACPI events */
84 #define ACPI_MTX_CACHES 4 /* Internal caches, general purposes */
85 #define ACPI_MTX_MEMORY 5 /* Debug memory tracking lists */
86 #define ACPI_MTX_DEBUG_CMD_COMPLETE 6 /* AML debugger */
87 #define ACPI_MTX_DEBUG_CMD_READY 7 /* AML debugger */
89 #define ACPI_MAX_MUTEX 7
90 #define ACPI_NUM_MUTEX ACPI_MAX_MUTEX+1
92 #if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
93 #ifdef DEFINE_ACPI_GLOBALS
95 /* Debug names for the mutexes above */
97 static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = {
98 "ACPI_MTX_Interpreter",
99 "ACPI_MTX_Namespace",
100 "ACPI_MTX_Tables",
101 "ACPI_MTX_Events",
102 "ACPI_MTX_Caches",
103 "ACPI_MTX_Memory",
104 "ACPI_MTX_CommandComplete",
105 "ACPI_MTX_CommandReady"
108 #endif
109 #endif
111 /* Lock structure for reader/writer interfaces */
113 struct acpi_rw_lock {
114 acpi_mutex writer_mutex;
115 acpi_mutex reader_mutex;
116 u32 num_readers;
120 * Predefined handles for spinlocks used within the subsystem.
121 * These spinlocks are created by acpi_ut_mutex_initialize
123 #define ACPI_LOCK_GPES 0
124 #define ACPI_LOCK_HARDWARE 1
126 #define ACPI_MAX_LOCK 1
127 #define ACPI_NUM_LOCK ACPI_MAX_LOCK+1
129 /* This Thread ID means that the mutex is not in use (unlocked) */
131 #define ACPI_MUTEX_NOT_ACQUIRED (acpi_thread_id) 0
133 /* Table for the global mutexes */
135 struct acpi_mutex_info {
136 acpi_mutex mutex;
137 u32 use_count;
138 acpi_thread_id thread_id;
141 /* Lock flag parameter for various interfaces */
143 #define ACPI_MTX_DO_NOT_LOCK 0
144 #define ACPI_MTX_LOCK 1
146 /* Field access granularities */
148 #define ACPI_FIELD_BYTE_GRANULARITY 1
149 #define ACPI_FIELD_WORD_GRANULARITY 2
150 #define ACPI_FIELD_DWORD_GRANULARITY 4
151 #define ACPI_FIELD_QWORD_GRANULARITY 8
153 #define ACPI_ENTRY_NOT_FOUND NULL
155 /*****************************************************************************
157 * Namespace typedefs and structs
159 ****************************************************************************/
161 /* Operational modes of the AML interpreter/scanner */
163 typedef enum {
164 ACPI_IMODE_LOAD_PASS1 = 0x01,
165 ACPI_IMODE_LOAD_PASS2 = 0x02,
166 ACPI_IMODE_EXECUTE = 0x03
167 } acpi_interpreter_mode;
170 * The Namespace Node describes a named object that appears in the AML.
171 * descriptor_type is used to differentiate between internal descriptors.
173 * The node is optimized for both 32-bit and 64-bit platforms:
174 * 20 bytes for the 32-bit case, 32 bytes for the 64-bit case.
176 * Note: The descriptor_type and Type fields must appear in the identical
177 * position in both the struct acpi_namespace_node and union acpi_operand_object
178 * structures.
180 struct acpi_namespace_node {
181 union acpi_operand_object *object; /* Interpreter object */
182 u8 descriptor_type; /* Differentiate object descriptor types */
183 u8 type; /* ACPI Type associated with this name */
184 u8 flags; /* Miscellaneous flags */
185 acpi_owner_id owner_id; /* Node creator */
186 union acpi_name_union name; /* ACPI Name, always 4 chars per ACPI spec */
187 struct acpi_namespace_node *child; /* First child */
188 struct acpi_namespace_node *peer; /* Peer. Parent if ANOBJ_END_OF_PEER_LIST set */
191 * The following fields are used by the ASL compiler and disassembler only
193 #ifdef ACPI_LARGE_NAMESPACE_NODE
194 union acpi_parse_object *op;
195 u32 value;
196 u32 length;
197 #endif
200 /* Namespace Node flags */
202 #define ANOBJ_END_OF_PEER_LIST 0x01 /* End-of-list, Peer field points to parent */
203 #define ANOBJ_TEMPORARY 0x02 /* Node is create by a method and is temporary */
204 #define ANOBJ_METHOD_ARG 0x04 /* Node is a method argument */
205 #define ANOBJ_METHOD_LOCAL 0x08 /* Node is a method local */
206 #define ANOBJ_SUBTREE_HAS_INI 0x10 /* Used to optimize device initialization */
207 #define ANOBJ_EVALUATED 0x20 /* Set on first evaluation of node */
208 #define ANOBJ_ALLOCATED_BUFFER 0x40 /* Method AML buffer is dynamic (install_method) */
210 #define ANOBJ_IS_EXTERNAL 0x08 /* i_aSL only: This object created via External() */
211 #define ANOBJ_METHOD_NO_RETVAL 0x10 /* i_aSL only: Method has no return value */
212 #define ANOBJ_METHOD_SOME_NO_RETVAL 0x20 /* i_aSL only: Method has at least one return value */
213 #define ANOBJ_IS_BIT_OFFSET 0x40 /* i_aSL only: Reference is a bit offset */
214 #define ANOBJ_IS_REFERENCED 0x80 /* i_aSL only: Object was referenced */
216 /* One internal RSDT for table management */
218 struct acpi_internal_rsdt {
219 struct acpi_table_desc *tables;
220 u32 count;
221 u32 size;
222 u8 flags;
225 /* Flags for above */
227 #define ACPI_ROOT_ORIGIN_UNKNOWN (0) /* ~ORIGIN_ALLOCATED */
228 #define ACPI_ROOT_ORIGIN_ALLOCATED (1)
229 #define ACPI_ROOT_ALLOW_RESIZE (2)
231 /* Predefined (fixed) table indexes */
233 #define ACPI_TABLE_INDEX_DSDT (0)
234 #define ACPI_TABLE_INDEX_FACS (1)
236 struct acpi_find_context {
237 char *search_for;
238 acpi_handle *list;
239 u32 *count;
242 struct acpi_ns_search_data {
243 struct acpi_namespace_node *node;
246 /* Object types used during package copies */
248 #define ACPI_COPY_TYPE_SIMPLE 0
249 #define ACPI_COPY_TYPE_PACKAGE 1
251 /* Info structure used to convert external<->internal namestrings */
253 struct acpi_namestring_info {
254 const char *external_name;
255 const char *next_external_char;
256 char *internal_name;
257 u32 length;
258 u32 num_segments;
259 u32 num_carats;
260 u8 fully_qualified;
263 /* Field creation info */
265 struct acpi_create_field_info {
266 struct acpi_namespace_node *region_node;
267 struct acpi_namespace_node *field_node;
268 struct acpi_namespace_node *register_node;
269 struct acpi_namespace_node *data_register_node;
270 u32 bank_value;
271 u32 field_bit_position;
272 u32 field_bit_length;
273 u8 field_flags;
274 u8 attribute;
275 u8 field_type;
278 typedef
279 acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state);
282 * Bitmapped ACPI types. Used internally only
284 #define ACPI_BTYPE_ANY 0x00000000
285 #define ACPI_BTYPE_INTEGER 0x00000001
286 #define ACPI_BTYPE_STRING 0x00000002
287 #define ACPI_BTYPE_BUFFER 0x00000004
288 #define ACPI_BTYPE_PACKAGE 0x00000008
289 #define ACPI_BTYPE_FIELD_UNIT 0x00000010
290 #define ACPI_BTYPE_DEVICE 0x00000020
291 #define ACPI_BTYPE_EVENT 0x00000040
292 #define ACPI_BTYPE_METHOD 0x00000080
293 #define ACPI_BTYPE_MUTEX 0x00000100
294 #define ACPI_BTYPE_REGION 0x00000200
295 #define ACPI_BTYPE_POWER 0x00000400
296 #define ACPI_BTYPE_PROCESSOR 0x00000800
297 #define ACPI_BTYPE_THERMAL 0x00001000
298 #define ACPI_BTYPE_BUFFER_FIELD 0x00002000
299 #define ACPI_BTYPE_DDB_HANDLE 0x00004000
300 #define ACPI_BTYPE_DEBUG_OBJECT 0x00008000
301 #define ACPI_BTYPE_REFERENCE 0x00010000
302 #define ACPI_BTYPE_RESOURCE 0x00020000
304 #define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
306 #define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE)
307 #define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
308 #define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
309 #define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */
310 #define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF
313 * Information structure for ACPI predefined names.
314 * Each entry in the table contains the following items:
316 * Name - The ACPI reserved name
317 * param_count - Number of arguments to the method
318 * expected_return_btypes - Allowed type(s) for the return value
320 struct acpi_name_info {
321 char name[ACPI_NAME_SIZE];
322 u8 param_count;
323 u8 expected_btypes;
327 * Secondary information structures for ACPI predefined objects that return
328 * package objects. This structure appears as the next entry in the table
329 * after the NAME_INFO structure above.
331 * The reason for this is to minimize the size of the predefined name table.
335 * Used for ACPI_PTYPE1_FIXED, ACPI_PTYPE1_VAR, ACPI_PTYPE2,
336 * ACPI_PTYPE2_MIN, ACPI_PTYPE2_PKG_COUNT, ACPI_PTYPE2_COUNT
338 struct acpi_package_info {
339 u8 type;
340 u8 object_type1;
341 u8 count1;
342 u8 object_type2;
343 u8 count2;
344 u8 reserved;
347 /* Used for ACPI_PTYPE2_FIXED */
349 struct acpi_package_info2 {
350 u8 type;
351 u8 count;
352 u8 object_type[4];
355 /* Used for ACPI_PTYPE1_OPTION */
357 struct acpi_package_info3 {
358 u8 type;
359 u8 count;
360 u8 object_type[2];
361 u8 tail_object_type;
362 u8 reserved;
365 union acpi_predefined_info {
366 struct acpi_name_info info;
367 struct acpi_package_info ret_info;
368 struct acpi_package_info2 ret_info2;
369 struct acpi_package_info3 ret_info3;
372 /* Data block used during object validation */
374 struct acpi_predefined_data {
375 char *pathname;
376 const union acpi_predefined_info *predefined;
377 u32 flags;
378 u8 node_flags;
381 /* Defines for Flags field above */
383 #define ACPI_OBJECT_REPAIRED 1
386 * Bitmapped return value types
387 * Note: the actual data types must be contiguous, a loop in nspredef.c
388 * depends on this.
390 #define ACPI_RTYPE_ANY 0x00
391 #define ACPI_RTYPE_NONE 0x01
392 #define ACPI_RTYPE_INTEGER 0x02
393 #define ACPI_RTYPE_STRING 0x04
394 #define ACPI_RTYPE_BUFFER 0x08
395 #define ACPI_RTYPE_PACKAGE 0x10
396 #define ACPI_RTYPE_REFERENCE 0x20
397 #define ACPI_RTYPE_ALL 0x3F
399 #define ACPI_NUM_RTYPES 5 /* Number of actual object types */
401 /*****************************************************************************
403 * Event typedefs and structs
405 ****************************************************************************/
407 /* Dispatch info for each GPE -- either a method or handler, cannot be both */
409 struct acpi_handler_info {
410 acpi_event_handler address; /* Address of handler, if any */
411 void *context; /* Context to be passed to handler */
412 struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */
415 union acpi_gpe_dispatch_info {
416 struct acpi_namespace_node *method_node; /* Method node for this GPE level */
417 struct acpi_handler_info *handler;
421 * Information about a GPE, one per each GPE in an array.
422 * NOTE: Important to keep this struct as small as possible.
424 struct acpi_gpe_event_info {
425 union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */
426 struct acpi_gpe_register_info *register_info; /* Backpointer to register info */
427 u8 flags; /* Misc info about this GPE */
428 u8 gpe_number; /* This GPE */
431 /* Information about a GPE register pair, one per each status/enable pair in an array */
433 struct acpi_gpe_register_info {
434 struct acpi_generic_address status_address; /* Address of status reg */
435 struct acpi_generic_address enable_address; /* Address of enable reg */
436 u8 enable_for_wake; /* GPEs to keep enabled when sleeping */
437 u8 enable_for_run; /* GPEs to keep enabled when running */
438 u8 base_gpe_number; /* Base GPE number for this register */
442 * Information about a GPE register block, one per each installed block --
443 * GPE0, GPE1, and one per each installed GPE Block Device.
445 struct acpi_gpe_block_info {
446 struct acpi_namespace_node *node;
447 struct acpi_gpe_block_info *previous;
448 struct acpi_gpe_block_info *next;
449 struct acpi_gpe_xrupt_info *xrupt_block; /* Backpointer to interrupt block */
450 struct acpi_gpe_register_info *register_info; /* One per GPE register pair */
451 struct acpi_gpe_event_info *event_info; /* One for each GPE */
452 struct acpi_generic_address block_address; /* Base address of the block */
453 u32 register_count; /* Number of register pairs in block */
454 u8 block_base_number; /* Base GPE number for this block */
457 /* Information about GPE interrupt handlers, one per each interrupt level used for GPEs */
459 struct acpi_gpe_xrupt_info {
460 struct acpi_gpe_xrupt_info *previous;
461 struct acpi_gpe_xrupt_info *next;
462 struct acpi_gpe_block_info *gpe_block_list_head; /* List of GPE blocks for this xrupt */
463 u32 interrupt_number; /* System interrupt number */
466 struct acpi_gpe_walk_info {
467 struct acpi_namespace_node *gpe_device;
468 struct acpi_gpe_block_info *gpe_block;
471 struct acpi_gpe_device_info {
472 u32 index;
473 u32 next_block_base_index;
474 acpi_status status;
475 struct acpi_namespace_node *gpe_device;
478 typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *gpe_xrupt_info,
479 struct acpi_gpe_block_info *gpe_block, void *context);
481 /* Information about each particular fixed event */
483 struct acpi_fixed_event_handler {
484 acpi_event_handler handler; /* Address of handler. */
485 void *context; /* Context to be passed to handler */
488 struct acpi_fixed_event_info {
489 u8 status_register_id;
490 u8 enable_register_id;
491 u16 status_bit_mask;
492 u16 enable_bit_mask;
495 /* Information used during field processing */
497 struct acpi_field_info {
498 u8 skip_field;
499 u8 field_flag;
500 u32 pkg_length;
503 /*****************************************************************************
505 * Generic "state" object for stacks
507 ****************************************************************************/
509 #define ACPI_CONTROL_NORMAL 0xC0
510 #define ACPI_CONTROL_CONDITIONAL_EXECUTING 0xC1
511 #define ACPI_CONTROL_PREDICATE_EXECUTING 0xC2
512 #define ACPI_CONTROL_PREDICATE_FALSE 0xC3
513 #define ACPI_CONTROL_PREDICATE_TRUE 0xC4
515 #define ACPI_STATE_COMMON \
516 void *next; \
517 u8 descriptor_type; /* To differentiate various internal objs */\
518 u8 flags; \
519 u16 value; \
520 u16 state;
522 /* There are 2 bytes available here until the next natural alignment boundary */
524 struct acpi_common_state {
525 ACPI_STATE_COMMON};
528 * Update state - used to traverse complex objects such as packages
530 struct acpi_update_state {
531 ACPI_STATE_COMMON union acpi_operand_object *object;
535 * Pkg state - used to traverse nested package structures
537 struct acpi_pkg_state {
538 ACPI_STATE_COMMON u16 index;
539 union acpi_operand_object *source_object;
540 union acpi_operand_object *dest_object;
541 struct acpi_walk_state *walk_state;
542 void *this_target_obj;
543 u32 num_packages;
547 * Control state - one per if/else and while constructs.
548 * Allows nesting of these constructs
550 struct acpi_control_state {
551 ACPI_STATE_COMMON u16 opcode;
552 union acpi_parse_object *predicate_op;
553 u8 *aml_predicate_start; /* Start of if/while predicate */
554 u8 *package_end; /* End of if/while block */
555 u32 loop_count; /* While() loop counter */
559 * Scope state - current scope during namespace lookups
561 struct acpi_scope_state {
562 ACPI_STATE_COMMON struct acpi_namespace_node *node;
565 struct acpi_pscope_state {
566 ACPI_STATE_COMMON u32 arg_count; /* Number of fixed arguments */
567 union acpi_parse_object *op; /* Current op being parsed */
568 u8 *arg_end; /* Current argument end */
569 u8 *pkg_end; /* Current package end */
570 u32 arg_list; /* Next argument to parse */
574 * Thread state - one per thread across multiple walk states. Multiple walk
575 * states are created when there are nested control methods executing.
577 struct acpi_thread_state {
578 ACPI_STATE_COMMON u8 current_sync_level; /* Mutex Sync (nested acquire) level */
579 struct acpi_walk_state *walk_state_list; /* Head of list of walk_states for this thread */
580 union acpi_operand_object *acquired_mutex_list; /* List of all currently acquired mutexes */
581 acpi_thread_id thread_id; /* Running thread ID */
585 * Result values - used to accumulate the results of nested
586 * AML arguments
588 struct acpi_result_values {
589 ACPI_STATE_COMMON
590 union acpi_operand_object *obj_desc[ACPI_RESULTS_FRAME_OBJ_NUM];
593 typedef
594 acpi_status(*acpi_parse_downwards) (struct acpi_walk_state * walk_state,
595 union acpi_parse_object ** out_op);
597 typedef acpi_status(*acpi_parse_upwards) (struct acpi_walk_state * walk_state);
600 * Notify info - used to pass info to the deferred notify
601 * handler/dispatcher.
603 struct acpi_notify_info {
604 ACPI_STATE_COMMON struct acpi_namespace_node *node;
605 union acpi_operand_object *handler_obj;
608 /* Generic state is union of structs above */
610 union acpi_generic_state {
611 struct acpi_common_state common;
612 struct acpi_control_state control;
613 struct acpi_update_state update;
614 struct acpi_scope_state scope;
615 struct acpi_pscope_state parse_scope;
616 struct acpi_pkg_state pkg;
617 struct acpi_thread_state thread;
618 struct acpi_result_values results;
619 struct acpi_notify_info notify;
622 /*****************************************************************************
624 * Interpreter typedefs and structs
626 ****************************************************************************/
628 typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state);
630 /*****************************************************************************
632 * Parser typedefs and structs
634 ****************************************************************************/
637 * AML opcode, name, and argument layout
639 struct acpi_opcode_info {
640 #if defined(ACPI_DISASSEMBLER) || defined(ACPI_DEBUG_OUTPUT)
641 char *name; /* Opcode name (disassembler/debug only) */
642 #endif
643 u32 parse_args; /* Grammar/Parse time arguments */
644 u32 runtime_args; /* Interpret time arguments */
645 u16 flags; /* Misc flags */
646 u8 object_type; /* Corresponding internal object type */
647 u8 class; /* Opcode class */
648 u8 type; /* Opcode type */
651 union acpi_parse_value {
652 acpi_integer integer; /* Integer constant (Up to 64 bits) */
653 struct uint64_struct integer64; /* Structure overlay for 2 32-bit Dwords */
654 u32 size; /* bytelist or field size */
655 char *string; /* NULL terminated string */
656 u8 *buffer; /* buffer or string */
657 char *name; /* NULL terminated string */
658 union acpi_parse_object *arg; /* arguments and contained ops */
661 #ifdef ACPI_DISASSEMBLER
662 #define ACPI_DISASM_ONLY_MEMBERS(a) a;
663 #else
664 #define ACPI_DISASM_ONLY_MEMBERS(a)
665 #endif
667 #define ACPI_PARSE_COMMON \
668 union acpi_parse_object *parent; /* Parent op */\
669 u8 descriptor_type; /* To differentiate various internal objs */\
670 u8 flags; /* Type of Op */\
671 u16 aml_opcode; /* AML opcode */\
672 u32 aml_offset; /* Offset of declaration in AML */\
673 union acpi_parse_object *next; /* Next op */\
674 struct acpi_namespace_node *node; /* For use by interpreter */\
675 union acpi_parse_value value; /* Value or args associated with the opcode */\
676 u8 arg_list_length; /* Number of elements in the arg list */\
677 ACPI_DISASM_ONLY_MEMBERS (\
678 u8 disasm_flags; /* Used during AML disassembly */\
679 u8 disasm_opcode; /* Subtype used for disassembly */\
680 char aml_op_name[16]) /* Op name (debug only) */
682 #define ACPI_DASM_BUFFER 0x00
683 #define ACPI_DASM_RESOURCE 0x01
684 #define ACPI_DASM_STRING 0x02
685 #define ACPI_DASM_UNICODE 0x03
686 #define ACPI_DASM_EISAID 0x04
687 #define ACPI_DASM_MATCHOP 0x05
688 #define ACPI_DASM_LNOT_PREFIX 0x06
689 #define ACPI_DASM_LNOT_SUFFIX 0x07
690 #define ACPI_DASM_IGNORE 0x08
693 * Generic operation (for example: If, While, Store)
695 struct acpi_parse_obj_common {
696 ACPI_PARSE_COMMON};
699 * Extended Op for named ops (Scope, Method, etc.), deferred ops (Methods and op_regions),
700 * and bytelists.
702 struct acpi_parse_obj_named {
703 ACPI_PARSE_COMMON u8 *path;
704 u8 *data; /* AML body or bytelist data */
705 u32 length; /* AML length */
706 u32 name; /* 4-byte name or zero if no name */
709 /* This version is used by the i_aSL compiler only */
711 #define ACPI_MAX_PARSEOP_NAME 20
713 struct acpi_parse_obj_asl {
714 ACPI_PARSE_COMMON union acpi_parse_object *child;
715 union acpi_parse_object *parent_method;
716 char *filename;
717 char *external_name;
718 char *namepath;
719 char name_seg[4];
720 u32 extra_value;
721 u32 column;
722 u32 line_number;
723 u32 logical_line_number;
724 u32 logical_byte_offset;
725 u32 end_line;
726 u32 end_logical_line;
727 u32 acpi_btype;
728 u32 aml_length;
729 u32 aml_subtree_length;
730 u32 final_aml_length;
731 u32 final_aml_offset;
732 u32 compile_flags;
733 u16 parse_opcode;
734 u8 aml_opcode_length;
735 u8 aml_pkg_len_bytes;
736 u8 extra;
737 char parse_op_name[ACPI_MAX_PARSEOP_NAME];
740 union acpi_parse_object {
741 struct acpi_parse_obj_common common;
742 struct acpi_parse_obj_named named;
743 struct acpi_parse_obj_asl asl;
747 * Parse state - one state per parser invocation and each control
748 * method.
750 struct acpi_parse_state {
751 u8 *aml_start; /* First AML byte */
752 u8 *aml; /* Next AML byte */
753 u8 *aml_end; /* (last + 1) AML byte */
754 u8 *pkg_start; /* Current package begin */
755 u8 *pkg_end; /* Current package end */
756 union acpi_parse_object *start_op; /* Root of parse tree */
757 struct acpi_namespace_node *start_node;
758 union acpi_generic_state *scope; /* Current scope */
759 union acpi_parse_object *start_scope;
760 u32 aml_size;
763 /* Parse object flags */
765 #define ACPI_PARSEOP_GENERIC 0x01
766 #define ACPI_PARSEOP_NAMED 0x02
767 #define ACPI_PARSEOP_DEFERRED 0x04
768 #define ACPI_PARSEOP_BYTELIST 0x08
769 #define ACPI_PARSEOP_IN_STACK 0x10
770 #define ACPI_PARSEOP_TARGET 0x20
771 #define ACPI_PARSEOP_IN_CACHE 0x80
773 /* Parse object disasm_flags */
775 #define ACPI_PARSEOP_IGNORE 0x01
776 #define ACPI_PARSEOP_PARAMLIST 0x02
777 #define ACPI_PARSEOP_EMPTY_TERMLIST 0x04
778 #define ACPI_PARSEOP_SPECIAL 0x10
780 /*****************************************************************************
782 * Hardware (ACPI registers) and PNP
784 ****************************************************************************/
786 struct acpi_bit_register_info {
787 u8 parent_register;
788 u8 bit_position;
789 u16 access_bit_mask;
793 * Some ACPI registers have bits that must be ignored -- meaning that they
794 * must be preserved.
796 #define ACPI_PM1_STATUS_PRESERVED_BITS 0x0800 /* Bit 11 */
798 /* Write-only bits must be zeroed by software */
800 #define ACPI_PM1_CONTROL_WRITEONLY_BITS 0x2004 /* Bits 13, 2 */
802 /* For control registers, both ignored and reserved bits must be preserved */
805 * For PM1 control, the SCI enable bit (bit 0, SCI_EN) is defined by the
806 * ACPI specification to be a "preserved" bit - "OSPM always preserves this
807 * bit position", section 4.7.3.2.1. However, on some machines the OS must
808 * write a one to this bit after resume for the machine to work properly.
809 * To enable this, we no longer attempt to preserve this bit. No machines
810 * are known to fail if the bit is not preserved. (May 2009)
812 #define ACPI_PM1_CONTROL_IGNORED_BITS 0x0200 /* Bit 9 */
813 #define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */
814 #define ACPI_PM1_CONTROL_PRESERVED_BITS \
815 (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
817 #define ACPI_PM2_CONTROL_PRESERVED_BITS 0xFFFFFFFE /* All except bit 0 */
820 * Register IDs
821 * These are the full ACPI registers
823 #define ACPI_REGISTER_PM1_STATUS 0x01
824 #define ACPI_REGISTER_PM1_ENABLE 0x02
825 #define ACPI_REGISTER_PM1_CONTROL 0x03
826 #define ACPI_REGISTER_PM2_CONTROL 0x04
827 #define ACPI_REGISTER_PM_TIMER 0x05
828 #define ACPI_REGISTER_PROCESSOR_BLOCK 0x06
829 #define ACPI_REGISTER_SMI_COMMAND_BLOCK 0x07
831 /* Masks used to access the bit_registers */
833 #define ACPI_BITMASK_TIMER_STATUS 0x0001
834 #define ACPI_BITMASK_BUS_MASTER_STATUS 0x0010
835 #define ACPI_BITMASK_GLOBAL_LOCK_STATUS 0x0020
836 #define ACPI_BITMASK_POWER_BUTTON_STATUS 0x0100
837 #define ACPI_BITMASK_SLEEP_BUTTON_STATUS 0x0200
838 #define ACPI_BITMASK_RT_CLOCK_STATUS 0x0400
839 #define ACPI_BITMASK_PCIEXP_WAKE_STATUS 0x4000 /* ACPI 3.0 */
840 #define ACPI_BITMASK_WAKE_STATUS 0x8000
842 #define ACPI_BITMASK_ALL_FIXED_STATUS (\
843 ACPI_BITMASK_TIMER_STATUS | \
844 ACPI_BITMASK_BUS_MASTER_STATUS | \
845 ACPI_BITMASK_GLOBAL_LOCK_STATUS | \
846 ACPI_BITMASK_POWER_BUTTON_STATUS | \
847 ACPI_BITMASK_SLEEP_BUTTON_STATUS | \
848 ACPI_BITMASK_RT_CLOCK_STATUS | \
849 ACPI_BITMASK_WAKE_STATUS)
851 #define ACPI_BITMASK_TIMER_ENABLE 0x0001
852 #define ACPI_BITMASK_GLOBAL_LOCK_ENABLE 0x0020
853 #define ACPI_BITMASK_POWER_BUTTON_ENABLE 0x0100
854 #define ACPI_BITMASK_SLEEP_BUTTON_ENABLE 0x0200
855 #define ACPI_BITMASK_RT_CLOCK_ENABLE 0x0400
856 #define ACPI_BITMASK_PCIEXP_WAKE_DISABLE 0x4000 /* ACPI 3.0 */
858 #define ACPI_BITMASK_SCI_ENABLE 0x0001
859 #define ACPI_BITMASK_BUS_MASTER_RLD 0x0002
860 #define ACPI_BITMASK_GLOBAL_LOCK_RELEASE 0x0004
861 #define ACPI_BITMASK_SLEEP_TYPE 0x1C00
862 #define ACPI_BITMASK_SLEEP_ENABLE 0x2000
864 #define ACPI_BITMASK_ARB_DISABLE 0x0001
866 /* Raw bit position of each bit_register */
868 #define ACPI_BITPOSITION_TIMER_STATUS 0x00
869 #define ACPI_BITPOSITION_BUS_MASTER_STATUS 0x04
870 #define ACPI_BITPOSITION_GLOBAL_LOCK_STATUS 0x05
871 #define ACPI_BITPOSITION_POWER_BUTTON_STATUS 0x08
872 #define ACPI_BITPOSITION_SLEEP_BUTTON_STATUS 0x09
873 #define ACPI_BITPOSITION_RT_CLOCK_STATUS 0x0A
874 #define ACPI_BITPOSITION_PCIEXP_WAKE_STATUS 0x0E /* ACPI 3.0 */
875 #define ACPI_BITPOSITION_WAKE_STATUS 0x0F
877 #define ACPI_BITPOSITION_TIMER_ENABLE 0x00
878 #define ACPI_BITPOSITION_GLOBAL_LOCK_ENABLE 0x05
879 #define ACPI_BITPOSITION_POWER_BUTTON_ENABLE 0x08
880 #define ACPI_BITPOSITION_SLEEP_BUTTON_ENABLE 0x09
881 #define ACPI_BITPOSITION_RT_CLOCK_ENABLE 0x0A
882 #define ACPI_BITPOSITION_PCIEXP_WAKE_DISABLE 0x0E /* ACPI 3.0 */
884 #define ACPI_BITPOSITION_SCI_ENABLE 0x00
885 #define ACPI_BITPOSITION_BUS_MASTER_RLD 0x01
886 #define ACPI_BITPOSITION_GLOBAL_LOCK_RELEASE 0x02
887 #define ACPI_BITPOSITION_SLEEP_TYPE 0x0A
888 #define ACPI_BITPOSITION_SLEEP_ENABLE 0x0D
890 #define ACPI_BITPOSITION_ARB_DISABLE 0x00
892 /* Structs and definitions for _OSI support and I/O port validation */
894 #define ACPI_OSI_WIN_2000 0x01
895 #define ACPI_OSI_WIN_XP 0x02
896 #define ACPI_OSI_WIN_XP_SP1 0x03
897 #define ACPI_OSI_WINSRV_2003 0x04
898 #define ACPI_OSI_WIN_XP_SP2 0x05
899 #define ACPI_OSI_WINSRV_2003_SP1 0x06
900 #define ACPI_OSI_WIN_VISTA 0x07
901 #define ACPI_OSI_WINSRV_2008 0x08
902 #define ACPI_OSI_WIN_VISTA_SP1 0x09
903 #define ACPI_OSI_WIN_7 0x0A
905 #define ACPI_ALWAYS_ILLEGAL 0x00
907 struct acpi_interface_info {
908 char *name;
909 u8 value;
912 struct acpi_port_info {
913 char *name;
914 u16 start;
915 u16 end;
916 u8 osi_dependency;
919 /*****************************************************************************
921 * Resource descriptors
923 ****************************************************************************/
925 /* resource_type values */
927 #define ACPI_ADDRESS_TYPE_MEMORY_RANGE 0
928 #define ACPI_ADDRESS_TYPE_IO_RANGE 1
929 #define ACPI_ADDRESS_TYPE_BUS_NUMBER_RANGE 2
931 /* Resource descriptor types and masks */
933 #define ACPI_RESOURCE_NAME_LARGE 0x80
934 #define ACPI_RESOURCE_NAME_SMALL 0x00
936 #define ACPI_RESOURCE_NAME_SMALL_MASK 0x78 /* Bits 6:3 contain the type */
937 #define ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK 0x07 /* Bits 2:0 contain the length */
938 #define ACPI_RESOURCE_NAME_LARGE_MASK 0x7F /* Bits 6:0 contain the type */
941 * Small resource descriptor "names" as defined by the ACPI specification.
942 * Note: Bits 2:0 are used for the descriptor length
944 #define ACPI_RESOURCE_NAME_IRQ 0x20
945 #define ACPI_RESOURCE_NAME_DMA 0x28
946 #define ACPI_RESOURCE_NAME_START_DEPENDENT 0x30
947 #define ACPI_RESOURCE_NAME_END_DEPENDENT 0x38
948 #define ACPI_RESOURCE_NAME_IO 0x40
949 #define ACPI_RESOURCE_NAME_FIXED_IO 0x48
950 #define ACPI_RESOURCE_NAME_RESERVED_S1 0x50
951 #define ACPI_RESOURCE_NAME_RESERVED_S2 0x58
952 #define ACPI_RESOURCE_NAME_RESERVED_S3 0x60
953 #define ACPI_RESOURCE_NAME_RESERVED_S4 0x68
954 #define ACPI_RESOURCE_NAME_VENDOR_SMALL 0x70
955 #define ACPI_RESOURCE_NAME_END_TAG 0x78
958 * Large resource descriptor "names" as defined by the ACPI specification.
959 * Note: includes the Large Descriptor bit in bit[7]
961 #define ACPI_RESOURCE_NAME_MEMORY24 0x81
962 #define ACPI_RESOURCE_NAME_GENERIC_REGISTER 0x82
963 #define ACPI_RESOURCE_NAME_RESERVED_L1 0x83
964 #define ACPI_RESOURCE_NAME_VENDOR_LARGE 0x84
965 #define ACPI_RESOURCE_NAME_MEMORY32 0x85
966 #define ACPI_RESOURCE_NAME_FIXED_MEMORY32 0x86
967 #define ACPI_RESOURCE_NAME_ADDRESS32 0x87
968 #define ACPI_RESOURCE_NAME_ADDRESS16 0x88
969 #define ACPI_RESOURCE_NAME_EXTENDED_IRQ 0x89
970 #define ACPI_RESOURCE_NAME_ADDRESS64 0x8A
971 #define ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 0x8B
972 #define ACPI_RESOURCE_NAME_LARGE_MAX 0x8B
974 /*****************************************************************************
976 * Miscellaneous
978 ****************************************************************************/
980 #define ACPI_ASCII_ZERO 0x30
982 /*****************************************************************************
984 * Debugger
986 ****************************************************************************/
988 struct acpi_db_method_info {
989 acpi_handle main_thread_gate;
990 acpi_handle thread_complete_gate;
991 u32 *threads;
992 u32 num_threads;
993 u32 num_created;
994 u32 num_completed;
996 char *name;
997 u32 flags;
998 u32 num_loops;
999 char pathname[128];
1000 char **args;
1003 * Arguments to be passed to method for the command
1004 * Threads -
1005 * the Number of threads, ID of current thread and
1006 * Index of current thread inside all them created.
1008 char init_args;
1009 char *arguments[4];
1010 char num_threads_str[11];
1011 char id_of_thread_str[11];
1012 char index_of_thread_str[11];
1015 struct acpi_integrity_info {
1016 u32 nodes;
1017 u32 objects;
1020 #define ACPI_DB_REDIRECTABLE_OUTPUT 0x01
1021 #define ACPI_DB_CONSOLE_OUTPUT 0x02
1022 #define ACPI_DB_DUPLICATE_OUTPUT 0x03
1024 /*****************************************************************************
1026 * Debug
1028 ****************************************************************************/
1030 /* Entry for a memory allocation (debug only) */
1032 #define ACPI_MEM_MALLOC 0
1033 #define ACPI_MEM_CALLOC 1
1034 #define ACPI_MAX_MODULE_NAME 16
1036 #define ACPI_COMMON_DEBUG_MEM_HEADER \
1037 struct acpi_debug_mem_block *previous; \
1038 struct acpi_debug_mem_block *next; \
1039 u32 size; \
1040 u32 component; \
1041 u32 line; \
1042 char module[ACPI_MAX_MODULE_NAME]; \
1043 u8 alloc_type;
1045 struct acpi_debug_mem_header {
1046 ACPI_COMMON_DEBUG_MEM_HEADER};
1048 struct acpi_debug_mem_block {
1049 ACPI_COMMON_DEBUG_MEM_HEADER u64 user_space;
1052 #define ACPI_MEM_LIST_GLOBAL 0
1053 #define ACPI_MEM_LIST_NSNODE 1
1054 #define ACPI_MEM_LIST_MAX 1
1055 #define ACPI_NUM_MEM_LISTS 2
1057 #endif /* __ACLOCAL_H__ */