drivers/atm/ambassador.h

   1 /*
   2   Madge Ambassador ATM Adapter driver.
   3   Copyright (C) 1995-1999  Madge Networks Ltd.
   4
   5   This program is free software; you can redistribute it and/or modify
   6   it under the terms of the GNU General Public License as published by
   7   the Free Software Foundation; either version 2 of the License, or
   8   (at your option) any later version.
   9
  10   This program is distributed in the hope that it will be useful,
  11   but WITHOUT ANY WARRANTY; without even the implied warranty of
  12   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13   GNU General Public License for more details.
  14
  15   You should have received a copy of the GNU General Public License
  16   along with this program; if not, write to the Free Software
  17   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18
  19   The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
  20   system and in the file COPYING in the Linux kernel source.
  21 */
  22
  23 #ifndef AMBASSADOR_H
  24 #define AMBASSADOR_H
  25
  26
  27 #ifdef CONFIG_ATM_AMBASSADOR_DEBUG
  28 #define DEBUG_AMBASSADOR
  29 #endif
  30
  31 #define DEV_LABEL                          "amb"
  32
  33 #ifndef PCI_VENDOR_ID_MADGE
  34 #define PCI_VENDOR_ID_MADGE                0x10B6
  35 #endif
  36 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR
  37 #define PCI_DEVICE_ID_MADGE_AMBASSADOR     0x1001
  38 #endif
  39 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR_BAD
  40 #define PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD 0x1002
  41 #endif
  42
  43 // diagnostic output
  44
  45 #define PRINTK(severity,format,args...) \
  46   printk(severity DEV_LABEL ": " format "\n" , ## args)
  47
  48 #ifdef DEBUG_AMBASSADOR
  49
  50 #define DBG_ERR  0x0001
  51 #define DBG_WARN 0x0002
  52 #define DBG_INFO 0x0004
  53 #define DBG_INIT 0x0008
  54 #define DBG_LOAD 0x0010
  55 #define DBG_VCC  0x0020
  56 #define DBG_QOS  0x0040
  57 #define DBG_CMD  0x0080
  58 #define DBG_TX   0x0100
  59 #define DBG_RX   0x0200
  60 #define DBG_SKB  0x0400
  61 #define DBG_POOL 0x0800
  62 #define DBG_IRQ  0x1000
  63 #define DBG_FLOW 0x2000
  64 #define DBG_REGS 0x4000
  65 #define DBG_DATA 0x8000
  66 #define DBG_MASK 0xffff
  67
  68 /* the ## prevents the annoying double expansion of the macro arguments */
  69 /* KERN_INFO is used since KERN_DEBUG often does not make it to the console */
  70 #define PRINTDB(bits,format,args...) \
  71   ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 )
  72 #define PRINTDM(bits,format,args...) \
  73   ( (debug & (bits)) ? printk (format , ## args) : 1 )
  74 #define PRINTDE(bits,format,args...) \
  75   ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 )
  76 #define PRINTD(bits,format,args...) \
  77   ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 )
  78
  79 #else
  80
  81 #define PRINTD(bits,format,args...)
  82 #define PRINTDB(bits,format,args...)
  83 #define PRINTDM(bits,format,args...)
  84 #define PRINTDE(bits,format,args...)
  85
  86 #endif
  87
  88 #define PRINTDD(bits,format,args...)
  89 #define PRINTDDB(sec,fmt,args...)
  90 #define PRINTDDM(sec,fmt,args...)
  91 #define PRINTDDE(sec,fmt,args...)
  92
  93 // tunable values (?)
  94
  95 /* MUST be powers of two -- why ? */
  96 #define COM_Q_ENTRIES        8
  97 #define TX_Q_ENTRIES        32
  98 #define RX_Q_ENTRIES        64
  99
 100 // fixed values
 101
 102 // guessing
 103 #define AMB_EXTENT         0x80
 104
 105 // Minimum allowed size for an Ambassador queue
 106 #define MIN_QUEUE_SIZE     2
 107
 108 // Ambassador microcode allows 1 to 4 pools, we use 4 (simpler)
 109 #define NUM_RX_POOLS       4
 110
 111 // minimum RX buffers required to cope with replenishing delay
 112 #define MIN_RX_BUFFERS     1
 113
 114 // minimum PCI latency we will tolerate (32 IS TOO SMALL)
 115 #define MIN_PCI_LATENCY   64 // 255
 116
 117 // VCs supported by card (VPI always 0)
 118 #define NUM_VPI_BITS       0
 119 #define NUM_VCI_BITS      10
 120 #define NUM_VCS         1024
 121
 122 /* The status field bits defined so far. */
 123 #define RX_ERR          0x8000 // always present if there is an error (hmm)
 124 #define CRC_ERR         0x4000 // AAL5 CRC error
 125 #define LEN_ERR         0x2000 // overlength frame
 126 #define ABORT_ERR       0x1000 // zero length field in received frame
 127 #define UNUSED_ERR      0x0800 // buffer returned unused
 128
 129 // Adaptor commands
 130
 131 #define SRB_OPEN_VC             0
 132 /* par_0: dwordswap(VC_number) */
 133 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/
 134 /* flags:               */
 135
 136 /* LANE:        0x0004          */
 137 /* NOT_UBR:     0x0008          */
 138 /* ABR:         0x0010          */
 139
 140 /* RxPool0:     0x0000          */
 141 /* RxPool1:     0x0020          */
 142 /* RxPool2:     0x0040          */
 143 /* RxPool3:     0x0060          */
 144
 145 /* par_2: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
 146
 147 #define SRB_CLOSE_VC            1
 148 /* par_0: dwordswap(VC_number) */
 149
 150 #define SRB_GET_BIA             2
 151 /* returns              */
 152 /* par_0: dwordswap(half BIA) */
 153 /* par_1: dwordswap(half BIA) */
 154
 155 #define SRB_GET_SUNI_STATS      3
 156 /* par_0: dwordswap(physical_host_address) */
 157
 158 #define SRB_SET_BITS_8          4
 159 #define SRB_SET_BITS_16         5
 160 #define SRB_SET_BITS_32         6
 161 #define SRB_CLEAR_BITS_8        7
 162 #define SRB_CLEAR_BITS_16       8
 163 #define SRB_CLEAR_BITS_32       9
 164 /* par_0: dwordswap(ATMizer address)    */
 165 /* par_1: dwordswap(mask) */
 166
 167 #define SRB_SET_8               10
 168 #define SRB_SET_16              11
 169 #define SRB_SET_32              12
 170 /* par_0: dwordswap(ATMizer address)    */
 171 /* par_1: dwordswap(data) */
 172
 173 #define SRB_GET_32              13
 174 /* par_0: dwordswap(ATMizer address)    */
 175 /* returns                      */
 176 /* par_1: dwordswap(ATMizer data) */
 177
 178 #define SRB_GET_VERSION         14
 179 /* returns              */
 180 /* par_0: dwordswap(Major Version) */
 181 /* par_1: dwordswap(Minor Version) */
 182
 183 #define SRB_FLUSH_BUFFER_Q      15
 184 /* Only flags to define which buffer pool; all others must be zero */
 185 /* par_0: dwordswap(flags<<16) or wordswap(flags)*/
 186
 187 #define SRB_GET_DMA_SPEEDS      16
 188 /* returns              */
 189 /* par_0: dwordswap(Read speed (bytes/sec)) */
 190 /* par_1: dwordswap(Write speed (bytes/sec)) */
 191
 192 #define SRB_MODIFY_VC_RATE      17
 193 /* par_0: dwordswap(VC_number) */
 194 /* par_1: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
 195
 196 #define SRB_MODIFY_VC_FLAGS     18
 197 /* par_0: dwordswap(VC_number) */
 198 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/
 199
 200 /* flags:               */
 201
 202 /* LANE:        0x0004          */
 203 /* NOT_UBR:     0x0008          */
 204 /* ABR:         0x0010          */
 205
 206 /* RxPool0:     0x0000          */
 207 /* RxPool1:     0x0020          */
 208 /* RxPool2:     0x0040          */
 209 /* RxPool3:     0x0060          */
 210
 211 #define SRB_RATE_SHIFT          16
 212 #define SRB_POOL_SHIFT          (SRB_FLAGS_SHIFT+5)
 213 #define SRB_FLAGS_SHIFT         16
 214
 215 #define SRB_STOP_TASKING        19
 216 #define SRB_START_TASKING       20
 217 #define SRB_SHUT_DOWN           21
 218 #define MAX_SRB                 21
 219
 220 #define SRB_COMPLETE            0xffffffff
 221
 222 #define TX_FRAME                0x80000000
 223
 224 // number of types of SRB MUST be a power of two -- why?
 225 #define NUM_OF_SRB      32
 226
 227 // number of bits of period info for rate
 228 #define MAX_RATE_BITS   6
 229
 230 #define TX_UBR          0x0000
 231 #define TX_UBR_CAPPED   0x0008
 232 #define TX_ABR          0x0018
 233 #define TX_FRAME_NOTCAP 0x0000
 234 #define TX_FRAME_CAPPED 0x8000
 235
 236 #define FP_155_RATE     0x24b1
 237 #define FP_25_RATE      0x1f9d
 238
 239 /* #define VERSION_NUMBER 0x01000000 // initial release */
 240 /* #define VERSION_NUMBER 0x01010000 // fixed startup probs PLX MB0 not cleared */
 241 /* #define VERSION_NUMBER 0x01020000 // changed SUNI reset timings; allowed r/w onchip */
 242
 243 /* #define VERSION_NUMBER 0x01030000 // clear local doorbell int reg on reset */
 244 /* #define VERSION_NUMBER 0x01040000 // PLX bug work around version PLUS */
 245 /* remove race conditions on basic interface */
 246 /* indicate to the host that diagnostics */
 247 /* have finished; if failed, how and what  */
 248 /* failed */
 249 /* fix host memory test to fix PLX bug */
 250 /* allow flash upgrade and BIA upgrade directly */
 251 /*  */
 252 #define VERSION_NUMBER 0x01050025 /* Jason's first hacked version. */
 253 /* Change in download algorithm */
 254
 255 #define DMA_VALID 0xb728e149 /* completely random */
 256
 257 #define FLASH_BASE 0xa0c00000
 258 #define FLASH_SIZE 0x00020000                   /* 128K */
 259 #define BIA_BASE (FLASH_BASE+0x0001c000)        /* Flash Sector 7 */
 260 #define BIA_ADDRESS ((void *)0xa0c1c000)
 261 #define PLX_BASE 0xe0000000
 262
 263 typedef enum {
 264   host_memory_test = 1,
 265   read_adapter_memory,
 266   write_adapter_memory,
 267   adapter_start,
 268   get_version_number,
 269   interrupt_host,
 270   flash_erase_sector,
 271   adap_download_block = 0x20,
 272   adap_erase_flash,
 273   adap_run_in_iram,
 274   adap_end_download
 275 } loader_command;
 276
 277 #define BAD_COMMAND                     (-1)
 278 #define COMMAND_IN_PROGRESS             1
 279 #define COMMAND_PASSED_TEST             2
 280 #define COMMAND_FAILED_TEST             3
 281 #define COMMAND_READ_DATA_OK            4
 282 #define COMMAND_READ_BAD_ADDRESS        5
 283 #define COMMAND_WRITE_DATA_OK           6
 284 #define COMMAND_WRITE_BAD_ADDRESS       7
 285 #define COMMAND_WRITE_FLASH_FAILURE     8
 286 #define COMMAND_COMPLETE                9
 287 #define COMMAND_FLASH_ERASE_FAILURE     10
 288 #define COMMAND_WRITE_BAD_DATA          11
 289
 290 /* bit fields for mailbox[0] return values */
 291
 292 #define GPINT_TST_FAILURE               0x00000001
 293 #define SUNI_DATA_PATTERN_FAILURE       0x00000002
 294 #define SUNI_DATA_BITS_FAILURE          0x00000004
 295 #define SUNI_UTOPIA_FAILURE             0x00000008
 296 #define SUNI_FIFO_FAILURE               0x00000010
 297 #define SRAM_FAILURE                    0x00000020
 298 #define SELF_TEST_FAILURE               0x0000003f
 299
 300 /* mailbox[1] = 0 in progress, -1 on completion */
 301 /* mailbox[2] = current test 00 00 test(8 bit) phase(8 bit) */
 302 /* mailbox[3] = last failure, 00 00 test(8 bit) phase(8 bit) */
 303 /* mailbox[4],mailbox[5],mailbox[6] random failure values */
 304
 305 /* PLX/etc. memory map including command structure */
 306
 307 /* These registers may also be memory mapped in PCI memory */
 308
 309 #define UNUSED_LOADER_MAILBOXES 6
 310
 311 typedef struct {
 312   u32 stuff[16];
 313   union {
 314     struct {
 315       u32 result;
 316       u32 ready;
 317       u32 stuff[UNUSED_LOADER_MAILBOXES];
 318     } loader;
 319     struct {
 320       u32 cmd_address;
 321       u32 tx_address;
 322       u32 rx_address[NUM_RX_POOLS];
 323       u32 gen_counter;
 324       u32 spare;
 325     } adapter;
 326   } mb;
 327   u32 doorbell;
 328   u32 interrupt;
 329   u32 interrupt_control;
 330   u32 reset_control;
 331 } amb_mem;
 332
 333 /* RESET bit, IRQ (card to host) and doorbell (host to card) enable bits */
 334 #define AMB_RESET_BITS     0x40000000
 335 #define AMB_INTERRUPT_BITS 0x00000300
 336 #define AMB_DOORBELL_BITS  0x00030000
 337
 338 /* loader commands */
 339
 340 #define MAX_COMMAND_DATA 13
 341 #define MAX_TRANSFER_DATA 11
 342
 343 typedef struct {
 344   __be32 address;
 345   __be32 count;
 346   __be32 data[MAX_TRANSFER_DATA];
 347 } transfer_block;
 348
 349 typedef struct {
 350   __be32 result;
 351   __be32 command;
 352   union {
 353     transfer_block transfer;
 354     __be32 version;
 355     __be32 start;
 356     __be32 data[MAX_COMMAND_DATA];
 357   } payload;
 358   __be32 valid;
 359 } loader_block;
 360
 361 /* command queue */
 362
 363 /* Again all data are BIG ENDIAN */
 364
 365 typedef struct {
 366   union {
 367     struct {
 368       __be32 vc;
 369       __be32 flags;
 370       __be32 rate;
 371     } open;
 372     struct {
 373       __be32 vc;
 374       __be32 rate;
 375     } modify_rate;
 376     struct {
 377       __be32 vc;
 378       __be32 flags;
 379     } modify_flags;
 380     struct {
 381       __be32 vc;
 382     } close;
 383     struct {
 384       __be32 lower4;
 385       __be32 upper2;
 386     } bia;
 387     struct {
 388       __be32 address;
 389     } suni;
 390     struct {
 391       __be32 major;
 392       __be32 minor;
 393     } version;
 394     struct {
 395       __be32 read;
 396       __be32 write;
 397     } speed;
 398     struct {
 399       __be32 flags;
 400     } flush;
 401     struct {
 402       __be32 address;
 403       __be32 data;
 404     } memory;
 405     __be32 par[3];
 406   } args;
 407   __be32 request;
 408 } command;
 409
 410 /* transmit queues and associated structures */
 411
 412 /* The hosts transmit structure. All BIG ENDIAN; host address
 413    restricted to first 1GByte, but address passed to the card must
 414    have the top MS bit or'ed in. -- check this */
 415
 416 /* TX is described by 1+ tx_frags followed by a tx_frag_end */
 417
 418 typedef struct {
 419   __be32 bytes;
 420   __be32 address;
 421 } tx_frag;
 422
 423 /* apart from handle the fields here are for the adapter to play with
 424    and should be set to zero */
 425
 426 typedef struct {
 427   u32   handle;
 428   u16   vc;
 429   u16   next_descriptor_length;
 430   u32   next_descriptor;
 431 #ifdef AMB_NEW_MICROCODE
 432   u8    cpcs_uu;
 433   u8    cpi;
 434   u16   pad;
 435 #endif
 436 } tx_frag_end;
 437
 438 typedef struct {
 439   tx_frag tx_frag;
 440   tx_frag_end tx_frag_end;
 441   struct sk_buff * skb;
 442 } tx_simple;
 443
 444 #if 0
 445 typedef union {
 446   tx_frag       fragment;
 447   tx_frag_end   end_of_list;
 448 } tx_descr;
 449 #endif
 450
 451 /* this "points" to the sequence of fragments and trailer */
 452
 453 typedef struct {
 454   __be16        vc;
 455   __be16        tx_descr_length;
 456   __be32        tx_descr_addr;
 457 } tx_in;
 458
 459 /* handle is the handle from tx_in */
 460
 461 typedef struct {
 462   u32 handle;
 463 } tx_out;
 464
 465 /* receive frame structure */
 466
 467 /* All BIG ENDIAN; handle is as passed from host; length is zero for
 468    aborted frames, and frames with errors. Header is actually VC
 469    number, lec-id is NOT yet supported. */
 470
 471 typedef struct {
 472   u32  handle;
 473   __be16  vc;
 474   __be16  lec_id; // unused
 475   __be16  status;
 476   __be16  length;
 477 } rx_out;
 478
 479 /* buffer supply structure */
 480
 481 typedef struct {
 482   u32 handle;
 483   __be32 host_address;
 484 } rx_in;
 485
 486 /* This first structure is the area in host memory where the adapter
 487    writes its pointer values. These pointer values are BIG ENDIAN and
 488    reside in the same 4MB 'page' as this structure. The host gives the
 489    adapter the address of this block by sending a doorbell interrupt
 490    to the adapter after downloading the code and setting it going. The
 491    addresses have the top 10 bits set to 1010000010b -- really?
 492
 493    The host must initialise these before handing the block to the
 494    adapter. */
 495
 496 typedef struct {
 497   __be32 command_start;         /* SRB commands completions */
 498   __be32 command_end;           /* SRB commands completions */
 499   __be32 tx_start;
 500   __be32 tx_end;
 501   __be32 txcom_start;           /* tx completions */
 502   __be32 txcom_end;             /* tx completions */
 503   struct {
 504     __be32 buffer_start;
 505     __be32 buffer_end;
 506     u32 buffer_q_get;
 507     u32 buffer_q_end;
 508     u32 buffer_aptr;
 509     __be32 rx_start;            /* rx completions */
 510     __be32 rx_end;
 511     u32 rx_ptr;
 512     __be32 buffer_size;         /* size of host buffer */
 513   } rec_struct[NUM_RX_POOLS];
 514 #ifdef AMB_NEW_MICROCODE
 515   u16 init_flags;
 516   u16 talk_block_spare;
 517 #endif
 518 } adap_talk_block;
 519
 520 /* This structure must be kept in line with the vcr image in sarmain.h
 521
 522    This is the structure in the host filled in by the adapter by
 523    GET_SUNI_STATS */
 524
 525 typedef struct {
 526   u8    racp_chcs;
 527   u8    racp_uhcs;
 528   u16   spare;
 529   u32   racp_rcell;
 530   u32   tacp_tcell;
 531   u32   flags;
 532   u32   dropped_cells;
 533   u32   dropped_frames;
 534 } suni_stats;
 535
 536 typedef enum {
 537   dead
 538 } amb_flags;
 539
 540 #define NEXTQ(current,start,limit) \
 541   ( (current)+1 < (limit) ? (current)+1 : (start) )
 542
 543 typedef struct {
 544   command * start;
 545   command * in;
 546   command * out;
 547   command * limit;
 548 } amb_cq_ptrs;
 549
 550 typedef struct {
 551   spinlock_t lock;
 552   unsigned int pending;
 553   unsigned int high;
 554   unsigned int filled;
 555   unsigned int maximum; // size - 1 (q implementation)
 556   amb_cq_ptrs ptrs;
 557 } amb_cq;
 558
 559 typedef struct {
 560   spinlock_t lock;
 561   unsigned int pending;
 562   unsigned int high;
 563   unsigned int filled;
 564   unsigned int maximum; // size - 1 (q implementation)
 565   struct {
 566     tx_in * start;
 567     tx_in * ptr;
 568     tx_in * limit;
 569   } in;
 570   struct {
 571     tx_out * start;
 572     tx_out * ptr;
 573     tx_out * limit;
 574   } out;
 575 } amb_txq;
 576
 577 typedef struct {
 578   spinlock_t lock;
 579   unsigned int pending;
 580   unsigned int low;
 581   unsigned int emptied;
 582   unsigned int maximum; // size - 1 (q implementation)
 583   struct {
 584     rx_in * start;
 585     rx_in * ptr;
 586     rx_in * limit;
 587   } in;
 588   struct {
 589     rx_out * start;
 590     rx_out * ptr;
 591     rx_out * limit;
 592   } out;
 593   unsigned int buffers_wanted;
 594   unsigned int buffer_size;
 595 } amb_rxq;
 596
 597 typedef struct {
 598   unsigned long tx_ok;
 599   struct {
 600     unsigned long ok;
 601     unsigned long error;
 602     unsigned long badcrc;
 603     unsigned long toolong;
 604     unsigned long aborted;
 605     unsigned long unused;
 606   } rx;
 607 } amb_stats;
 608
 609 // a single struct pointed to by atm_vcc->dev_data
 610
 611 typedef struct {
 612   u8               tx_vc_bits:7;
 613   u8               tx_present:1;
 614 } amb_tx_info;
 615
 616 typedef struct {
 617   unsigned char    pool;
 618 } amb_rx_info;
 619
 620 typedef struct {
 621   amb_rx_info      rx_info;
 622   u16              tx_frame_bits;
 623   unsigned int     tx_rate;
 624   unsigned int     rx_rate;
 625 } amb_vcc;
 626
 627 struct amb_dev {
 628   u8               irq;
 629   unsigned long    flags;
 630   u32              iobase;
 631   u32 *            membase;
 632
 633 #ifdef FILL_RX_POOLS_IN_BH
 634   struct work_struct bh;
 635 #endif
 636
 637   amb_cq           cq;
 638   amb_txq          txq;
 639   amb_rxq          rxq[NUM_RX_POOLS];
 640
 641   struct mutex     vcc_sf;
 642   amb_tx_info      txer[NUM_VCS];
 643   struct atm_vcc * rxer[NUM_VCS];
 644   unsigned int     tx_avail;
 645   unsigned int     rx_avail;
 646
 647   amb_stats        stats;
 648
 649   struct atm_dev * atm_dev;
 650   struct pci_dev * pci_dev;
 651   struct timer_list housekeeping;
 652 };
 653
 654 typedef struct amb_dev amb_dev;
 655
 656 #define AMB_DEV(atm_dev) ((amb_dev *) (atm_dev)->dev_data)
 657 #define AMB_VCC(atm_vcc) ((amb_vcc *) (atm_vcc)->dev_data)
 658
 659 /* rate rounding */
 660
 661 typedef enum {
 662   round_up,
 663   round_down,
 664   round_nearest
 665 } rounding;
 666
 667 #endif