[ARM] pxa: Gumstix Verdex PCMCIA support
[linux-2.6/verdex.git] / drivers / block / cciss.h
blob31524cf42c77360645424a9c85e68a9651ba8422
1 #ifndef CCISS_H
2 #define CCISS_H
4 #include <linux/genhd.h>
5 #include <linux/mutex.h>
7 #include "cciss_cmd.h"
10 #define NWD_SHIFT 4
11 #define MAX_PART (1 << NWD_SHIFT)
13 #define IO_OK 0
14 #define IO_ERROR 1
15 #define IO_NEEDS_RETRY 3
17 #define VENDOR_LEN 8
18 #define MODEL_LEN 16
19 #define REV_LEN 4
21 struct ctlr_info;
22 typedef struct ctlr_info ctlr_info_t;
24 struct access_method {
25 void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
26 void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
27 unsigned long (*fifo_full)(ctlr_info_t *h);
28 unsigned long (*intr_pending)(ctlr_info_t *h);
29 unsigned long (*command_completed)(ctlr_info_t *h);
31 typedef struct _drive_info_struct
33 unsigned char LunID[8];
34 int usage_count;
35 struct request_queue *queue;
36 sector_t nr_blocks;
37 int block_size;
38 int heads;
39 int sectors;
40 int cylinders;
41 int raid_level; /* set to -1 to indicate that
42 * the drive is not in use/configured
44 int busy_configuring; /* This is set when a drive is being removed
45 * to prevent it from being opened or it's
46 * queue from being started.
48 struct device dev;
49 __u8 serial_no[16]; /* from inquiry page 0x83,
50 * not necc. null terminated.
52 char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
53 char model[MODEL_LEN + 1]; /* SCSI model string */
54 char rev[REV_LEN + 1]; /* SCSI revision string */
55 char device_initialized; /* indicates whether dev is initialized */
56 } drive_info_struct;
58 struct ctlr_info
60 int ctlr;
61 char devname[8];
62 char *product_name;
63 char firm_ver[4]; // Firmware version
64 struct pci_dev *pdev;
65 __u32 board_id;
66 void __iomem *vaddr;
67 unsigned long paddr;
68 int nr_cmds; /* Number of commands allowed on this controller */
69 CfgTable_struct __iomem *cfgtable;
70 int interrupts_enabled;
71 int major;
72 int max_commands;
73 int commands_outstanding;
74 int max_outstanding; /* Debug */
75 int num_luns;
76 int highest_lun;
77 int usage_count; /* number of opens all all minor devices */
78 # define DOORBELL_INT 0
79 # define PERF_MODE_INT 1
80 # define SIMPLE_MODE_INT 2
81 # define MEMQ_MODE_INT 3
82 unsigned int intr[4];
83 unsigned int msix_vector;
84 unsigned int msi_vector;
85 int cciss_max_sectors;
86 BYTE cciss_read;
87 BYTE cciss_write;
88 BYTE cciss_read_capacity;
90 // information about each logical volume
91 drive_info_struct *drv[CISS_MAX_LUN];
93 struct access_method access;
95 /* queue and queue Info */
96 struct hlist_head reqQ;
97 struct hlist_head cmpQ;
98 unsigned int Qdepth;
99 unsigned int maxQsinceinit;
100 unsigned int maxSG;
101 spinlock_t lock;
103 //* pointers to command and error info pool */
104 CommandList_struct *cmd_pool;
105 dma_addr_t cmd_pool_dhandle;
106 ErrorInfo_struct *errinfo_pool;
107 dma_addr_t errinfo_pool_dhandle;
108 unsigned long *cmd_pool_bits;
109 int nr_allocs;
110 int nr_frees;
111 int busy_configuring;
112 int busy_initializing;
113 int busy_scanning;
114 struct mutex busy_shutting_down;
116 /* This element holds the zero based queue number of the last
117 * queue to be started. It is used for fairness.
119 int next_to_run;
121 // Disk structures we need to pass back
122 struct gendisk *gendisk[CISS_MAX_LUN];
123 #ifdef CONFIG_CISS_SCSI_TAPE
124 void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
125 /* list of block side commands the scsi error handling sucked up */
126 /* and saved for later processing */
127 #endif
128 unsigned char alive;
129 struct list_head scan_list;
130 struct completion scan_wait;
131 struct device dev;
134 /* Defining the diffent access_menthods */
136 * Memory mapped FIFO interface (SMART 53xx cards)
138 #define SA5_DOORBELL 0x20
139 #define SA5_REQUEST_PORT_OFFSET 0x40
140 #define SA5_REPLY_INTR_MASK_OFFSET 0x34
141 #define SA5_REPLY_PORT_OFFSET 0x44
142 #define SA5_INTR_STATUS 0x30
143 #define SA5_SCRATCHPAD_OFFSET 0xB0
145 #define SA5_CTCFG_OFFSET 0xB4
146 #define SA5_CTMEM_OFFSET 0xB8
148 #define SA5_INTR_OFF 0x08
149 #define SA5B_INTR_OFF 0x04
150 #define SA5_INTR_PENDING 0x08
151 #define SA5B_INTR_PENDING 0x04
152 #define FIFO_EMPTY 0xffffffff
153 #define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
155 #define CISS_ERROR_BIT 0x02
157 #define CCISS_INTR_ON 1
158 #define CCISS_INTR_OFF 0
160 Send the command to the hardware
162 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
164 #ifdef CCISS_DEBUG
165 printk("Sending %x - down to controller\n", c->busaddr );
166 #endif /* CCISS_DEBUG */
167 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
168 h->commands_outstanding++;
169 if ( h->commands_outstanding > h->max_outstanding)
170 h->max_outstanding = h->commands_outstanding;
174 * This card is the opposite of the other cards.
175 * 0 turns interrupts on...
176 * 0x08 turns them off...
178 static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
180 if (val)
181 { /* Turn interrupts on */
182 h->interrupts_enabled = 1;
183 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
184 } else /* Turn them off */
186 h->interrupts_enabled = 0;
187 writel( SA5_INTR_OFF,
188 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
192 * This card is the opposite of the other cards.
193 * 0 turns interrupts on...
194 * 0x04 turns them off...
196 static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
198 if (val)
199 { /* Turn interrupts on */
200 h->interrupts_enabled = 1;
201 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
202 } else /* Turn them off */
204 h->interrupts_enabled = 0;
205 writel( SA5B_INTR_OFF,
206 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
210 * Returns true if fifo is full.
213 static unsigned long SA5_fifo_full(ctlr_info_t *h)
215 if( h->commands_outstanding >= h->max_commands)
216 return(1);
217 else
218 return(0);
222 * returns value read from hardware.
223 * returns FIFO_EMPTY if there is nothing to read
225 static unsigned long SA5_completed(ctlr_info_t *h)
227 unsigned long register_value
228 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
229 if(register_value != FIFO_EMPTY)
231 h->commands_outstanding--;
232 #ifdef CCISS_DEBUG
233 printk("cciss: Read %lx back from board\n", register_value);
234 #endif /* CCISS_DEBUG */
236 #ifdef CCISS_DEBUG
237 else
239 printk("cciss: FIFO Empty read\n");
241 #endif
242 return ( register_value);
246 * Returns true if an interrupt is pending..
248 static unsigned long SA5_intr_pending(ctlr_info_t *h)
250 unsigned long register_value =
251 readl(h->vaddr + SA5_INTR_STATUS);
252 #ifdef CCISS_DEBUG
253 printk("cciss: intr_pending %lx\n", register_value);
254 #endif /* CCISS_DEBUG */
255 if( register_value & SA5_INTR_PENDING)
256 return 1;
257 return 0 ;
261 * Returns true if an interrupt is pending..
263 static unsigned long SA5B_intr_pending(ctlr_info_t *h)
265 unsigned long register_value =
266 readl(h->vaddr + SA5_INTR_STATUS);
267 #ifdef CCISS_DEBUG
268 printk("cciss: intr_pending %lx\n", register_value);
269 #endif /* CCISS_DEBUG */
270 if( register_value & SA5B_INTR_PENDING)
271 return 1;
272 return 0 ;
276 static struct access_method SA5_access = {
277 SA5_submit_command,
278 SA5_intr_mask,
279 SA5_fifo_full,
280 SA5_intr_pending,
281 SA5_completed,
284 static struct access_method SA5B_access = {
285 SA5_submit_command,
286 SA5B_intr_mask,
287 SA5_fifo_full,
288 SA5B_intr_pending,
289 SA5_completed,
292 struct board_type {
293 __u32 board_id;
294 char *product_name;
295 struct access_method *access;
296 int nr_cmds; /* Max cmds this kind of ctlr can handle. */
299 #define CCISS_LOCK(i) (&hba[i]->lock)
301 #endif /* CCISS_H */