[ARM] pxa: Gumstix Verdex PCMCIA support
[linux-2.6/verdex.git] / drivers / dma / fsldma.c
blob296f9e747fac3b920cc344e6862f6d20d7c4b6b8
1 /*
2 * Freescale MPC85xx, MPC83xx DMA Engine support
4 * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
6 * Author:
7 * Zhang Wei <wei.zhang@freescale.com>, Jul 2007
8 * Ebony Zhu <ebony.zhu@freescale.com>, May 2007
10 * Description:
11 * DMA engine driver for Freescale MPC8540 DMA controller, which is
12 * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
13 * The support for MPC8349 DMA contorller is also added.
15 * This driver instructs the DMA controller to issue the PCI Read Multiple
16 * command for PCI read operations, instead of using the default PCI Read Line
17 * command. Please be aware that this setting may result in read pre-fetching
18 * on some platforms.
20 * This is free software; you can redistribute it and/or modify
21 * it under the terms of the GNU General Public License as published by
22 * the Free Software Foundation; either version 2 of the License, or
23 * (at your option) any later version.
27 #include <linux/init.h>
28 #include <linux/module.h>
29 #include <linux/pci.h>
30 #include <linux/interrupt.h>
31 #include <linux/dmaengine.h>
32 #include <linux/delay.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/dmapool.h>
35 #include <linux/of_platform.h>
37 #include <asm/fsldma.h>
38 #include "fsldma.h"
40 static void dma_init(struct fsl_dma_chan *fsl_chan)
42 /* Reset the channel */
43 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, 0, 32);
45 switch (fsl_chan->feature & FSL_DMA_IP_MASK) {
46 case FSL_DMA_IP_85XX:
47 /* Set the channel to below modes:
48 * EIE - Error interrupt enable
49 * EOSIE - End of segments interrupt enable (basic mode)
50 * EOLNIE - End of links interrupt enable
52 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EIE
53 | FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32);
54 break;
55 case FSL_DMA_IP_83XX:
56 /* Set the channel to below modes:
57 * EOTIE - End-of-transfer interrupt enable
58 * PRC_RM - PCI read multiple
60 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
61 | FSL_DMA_MR_PRC_RM, 32);
62 break;
67 static void set_sr(struct fsl_dma_chan *fsl_chan, u32 val)
69 DMA_OUT(fsl_chan, &fsl_chan->reg_base->sr, val, 32);
72 static u32 get_sr(struct fsl_dma_chan *fsl_chan)
74 return DMA_IN(fsl_chan, &fsl_chan->reg_base->sr, 32);
77 static void set_desc_cnt(struct fsl_dma_chan *fsl_chan,
78 struct fsl_dma_ld_hw *hw, u32 count)
80 hw->count = CPU_TO_DMA(fsl_chan, count, 32);
83 static void set_desc_src(struct fsl_dma_chan *fsl_chan,
84 struct fsl_dma_ld_hw *hw, dma_addr_t src)
86 u64 snoop_bits;
88 snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX)
89 ? ((u64)FSL_DMA_SATR_SREADTYPE_SNOOP_READ << 32) : 0;
90 hw->src_addr = CPU_TO_DMA(fsl_chan, snoop_bits | src, 64);
93 static void set_desc_dest(struct fsl_dma_chan *fsl_chan,
94 struct fsl_dma_ld_hw *hw, dma_addr_t dest)
96 u64 snoop_bits;
98 snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX)
99 ? ((u64)FSL_DMA_DATR_DWRITETYPE_SNOOP_WRITE << 32) : 0;
100 hw->dst_addr = CPU_TO_DMA(fsl_chan, snoop_bits | dest, 64);
103 static void set_desc_next(struct fsl_dma_chan *fsl_chan,
104 struct fsl_dma_ld_hw *hw, dma_addr_t next)
106 u64 snoop_bits;
108 snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
109 ? FSL_DMA_SNEN : 0;
110 hw->next_ln_addr = CPU_TO_DMA(fsl_chan, snoop_bits | next, 64);
113 static void set_cdar(struct fsl_dma_chan *fsl_chan, dma_addr_t addr)
115 DMA_OUT(fsl_chan, &fsl_chan->reg_base->cdar, addr | FSL_DMA_SNEN, 64);
118 static dma_addr_t get_cdar(struct fsl_dma_chan *fsl_chan)
120 return DMA_IN(fsl_chan, &fsl_chan->reg_base->cdar, 64) & ~FSL_DMA_SNEN;
123 static void set_ndar(struct fsl_dma_chan *fsl_chan, dma_addr_t addr)
125 DMA_OUT(fsl_chan, &fsl_chan->reg_base->ndar, addr, 64);
128 static dma_addr_t get_ndar(struct fsl_dma_chan *fsl_chan)
130 return DMA_IN(fsl_chan, &fsl_chan->reg_base->ndar, 64);
133 static u32 get_bcr(struct fsl_dma_chan *fsl_chan)
135 return DMA_IN(fsl_chan, &fsl_chan->reg_base->bcr, 32);
138 static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
140 u32 sr = get_sr(fsl_chan);
141 return (!(sr & FSL_DMA_SR_CB)) || (sr & FSL_DMA_SR_CH);
144 static void dma_start(struct fsl_dma_chan *fsl_chan)
146 u32 mr_set = 0;
148 if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
149 DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
150 mr_set |= FSL_DMA_MR_EMP_EN;
151 } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
152 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
153 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
154 & ~FSL_DMA_MR_EMP_EN, 32);
157 if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
158 mr_set |= FSL_DMA_MR_EMS_EN;
159 else
160 mr_set |= FSL_DMA_MR_CS;
162 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
163 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
164 | mr_set, 32);
167 static void dma_halt(struct fsl_dma_chan *fsl_chan)
169 int i;
171 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
172 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
173 32);
174 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
175 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
176 | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
178 for (i = 0; i < 100; i++) {
179 if (dma_is_idle(fsl_chan))
180 break;
181 udelay(10);
183 if (i >= 100 && !dma_is_idle(fsl_chan))
184 dev_err(fsl_chan->dev, "DMA halt timeout!\n");
187 static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
188 struct fsl_desc_sw *desc)
190 u64 snoop_bits;
192 snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
193 ? FSL_DMA_SNEN : 0;
195 desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
196 DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL
197 | snoop_bits, 64);
200 static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
201 struct fsl_desc_sw *new_desc)
203 struct fsl_desc_sw *queue_tail = to_fsl_desc(fsl_chan->ld_queue.prev);
205 if (list_empty(&fsl_chan->ld_queue))
206 return;
208 /* Link to the new descriptor physical address and
209 * Enable End-of-segment interrupt for
210 * the last link descriptor.
211 * (the previous node's next link descriptor)
213 * For FSL_DMA_IP_83xx, the snoop enable bit need be set.
215 queue_tail->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
216 new_desc->async_tx.phys | FSL_DMA_EOSIE |
217 (((fsl_chan->feature & FSL_DMA_IP_MASK)
218 == FSL_DMA_IP_83XX) ? FSL_DMA_SNEN : 0), 64);
222 * fsl_chan_set_src_loop_size - Set source address hold transfer size
223 * @fsl_chan : Freescale DMA channel
224 * @size : Address loop size, 0 for disable loop
226 * The set source address hold transfer size. The source
227 * address hold or loop transfer size is when the DMA transfer
228 * data from source address (SA), if the loop size is 4, the DMA will
229 * read data from SA, SA + 1, SA + 2, SA + 3, then loop back to SA,
230 * SA + 1 ... and so on.
232 static void fsl_chan_set_src_loop_size(struct fsl_dma_chan *fsl_chan, int size)
234 switch (size) {
235 case 0:
236 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
237 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) &
238 (~FSL_DMA_MR_SAHE), 32);
239 break;
240 case 1:
241 case 2:
242 case 4:
243 case 8:
244 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
245 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) |
246 FSL_DMA_MR_SAHE | (__ilog2(size) << 14),
247 32);
248 break;
253 * fsl_chan_set_dest_loop_size - Set destination address hold transfer size
254 * @fsl_chan : Freescale DMA channel
255 * @size : Address loop size, 0 for disable loop
257 * The set destination address hold transfer size. The destination
258 * address hold or loop transfer size is when the DMA transfer
259 * data to destination address (TA), if the loop size is 4, the DMA will
260 * write data to TA, TA + 1, TA + 2, TA + 3, then loop back to TA,
261 * TA + 1 ... and so on.
263 static void fsl_chan_set_dest_loop_size(struct fsl_dma_chan *fsl_chan, int size)
265 switch (size) {
266 case 0:
267 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
268 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) &
269 (~FSL_DMA_MR_DAHE), 32);
270 break;
271 case 1:
272 case 2:
273 case 4:
274 case 8:
275 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
276 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) |
277 FSL_DMA_MR_DAHE | (__ilog2(size) << 16),
278 32);
279 break;
284 * fsl_chan_set_request_count - Set DMA Request Count for external control
285 * @fsl_chan : Freescale DMA channel
286 * @size : Number of bytes to transfer in a single request
288 * The Freescale DMA channel can be controlled by the external signal DREQ#.
289 * The DMA request count is how many bytes are allowed to transfer before
290 * pausing the channel, after which a new assertion of DREQ# resumes channel
291 * operation.
293 * A size of 0 disables external pause control. The maximum size is 1024.
295 static void fsl_chan_set_request_count(struct fsl_dma_chan *fsl_chan, int size)
297 BUG_ON(size > 1024);
298 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
299 DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
300 | ((__ilog2(size) << 24) & 0x0f000000),
301 32);
305 * fsl_chan_toggle_ext_pause - Toggle channel external pause status
306 * @fsl_chan : Freescale DMA channel
307 * @enable : 0 is disabled, 1 is enabled.
309 * The Freescale DMA channel can be controlled by the external signal DREQ#.
310 * The DMA Request Count feature should be used in addition to this feature
311 * to set the number of bytes to transfer before pausing the channel.
313 static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int enable)
315 if (enable)
316 fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT;
317 else
318 fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT;
322 * fsl_chan_toggle_ext_start - Toggle channel external start status
323 * @fsl_chan : Freescale DMA channel
324 * @enable : 0 is disabled, 1 is enabled.
326 * If enable the external start, the channel can be started by an
327 * external DMA start pin. So the dma_start() does not start the
328 * transfer immediately. The DMA channel will wait for the
329 * control pin asserted.
331 static void fsl_chan_toggle_ext_start(struct fsl_dma_chan *fsl_chan, int enable)
333 if (enable)
334 fsl_chan->feature |= FSL_DMA_CHAN_START_EXT;
335 else
336 fsl_chan->feature &= ~FSL_DMA_CHAN_START_EXT;
339 static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
341 struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
342 struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
343 struct fsl_desc_sw *child;
344 unsigned long flags;
345 dma_cookie_t cookie;
347 /* cookie increment and adding to ld_queue must be atomic */
348 spin_lock_irqsave(&fsl_chan->desc_lock, flags);
350 cookie = fsl_chan->common.cookie;
351 list_for_each_entry(child, &desc->tx_list, node) {
352 cookie++;
353 if (cookie < 0)
354 cookie = 1;
356 desc->async_tx.cookie = cookie;
359 fsl_chan->common.cookie = cookie;
360 append_ld_queue(fsl_chan, desc);
361 list_splice_init(&desc->tx_list, fsl_chan->ld_queue.prev);
363 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
365 return cookie;
369 * fsl_dma_alloc_descriptor - Allocate descriptor from channel's DMA pool.
370 * @fsl_chan : Freescale DMA channel
372 * Return - The descriptor allocated. NULL for failed.
374 static struct fsl_desc_sw *fsl_dma_alloc_descriptor(
375 struct fsl_dma_chan *fsl_chan)
377 dma_addr_t pdesc;
378 struct fsl_desc_sw *desc_sw;
380 desc_sw = dma_pool_alloc(fsl_chan->desc_pool, GFP_ATOMIC, &pdesc);
381 if (desc_sw) {
382 memset(desc_sw, 0, sizeof(struct fsl_desc_sw));
383 INIT_LIST_HEAD(&desc_sw->tx_list);
384 dma_async_tx_descriptor_init(&desc_sw->async_tx,
385 &fsl_chan->common);
386 desc_sw->async_tx.tx_submit = fsl_dma_tx_submit;
387 desc_sw->async_tx.phys = pdesc;
390 return desc_sw;
395 * fsl_dma_alloc_chan_resources - Allocate resources for DMA channel.
396 * @fsl_chan : Freescale DMA channel
398 * This function will create a dma pool for descriptor allocation.
400 * Return - The number of descriptors allocated.
402 static int fsl_dma_alloc_chan_resources(struct dma_chan *chan)
404 struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
406 /* Has this channel already been allocated? */
407 if (fsl_chan->desc_pool)
408 return 1;
410 /* We need the descriptor to be aligned to 32bytes
411 * for meeting FSL DMA specification requirement.
413 fsl_chan->desc_pool = dma_pool_create("fsl_dma_engine_desc_pool",
414 fsl_chan->dev, sizeof(struct fsl_desc_sw),
415 32, 0);
416 if (!fsl_chan->desc_pool) {
417 dev_err(fsl_chan->dev, "No memory for channel %d "
418 "descriptor dma pool.\n", fsl_chan->id);
419 return 0;
422 return 1;
426 * fsl_dma_free_chan_resources - Free all resources of the channel.
427 * @fsl_chan : Freescale DMA channel
429 static void fsl_dma_free_chan_resources(struct dma_chan *chan)
431 struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
432 struct fsl_desc_sw *desc, *_desc;
433 unsigned long flags;
435 dev_dbg(fsl_chan->dev, "Free all channel resources.\n");
436 spin_lock_irqsave(&fsl_chan->desc_lock, flags);
437 list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) {
438 #ifdef FSL_DMA_LD_DEBUG
439 dev_dbg(fsl_chan->dev,
440 "LD %p will be released.\n", desc);
441 #endif
442 list_del(&desc->node);
443 /* free link descriptor */
444 dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
446 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
447 dma_pool_destroy(fsl_chan->desc_pool);
449 fsl_chan->desc_pool = NULL;
452 static struct dma_async_tx_descriptor *
453 fsl_dma_prep_interrupt(struct dma_chan *chan, unsigned long flags)
455 struct fsl_dma_chan *fsl_chan;
456 struct fsl_desc_sw *new;
458 if (!chan)
459 return NULL;
461 fsl_chan = to_fsl_chan(chan);
463 new = fsl_dma_alloc_descriptor(fsl_chan);
464 if (!new) {
465 dev_err(fsl_chan->dev, "No free memory for link descriptor\n");
466 return NULL;
469 new->async_tx.cookie = -EBUSY;
470 new->async_tx.flags = flags;
472 /* Insert the link descriptor to the LD ring */
473 list_add_tail(&new->node, &new->tx_list);
475 /* Set End-of-link to the last link descriptor of new list*/
476 set_ld_eol(fsl_chan, new);
478 return &new->async_tx;
481 static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
482 struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
483 size_t len, unsigned long flags)
485 struct fsl_dma_chan *fsl_chan;
486 struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
487 struct list_head *list;
488 size_t copy;
490 if (!chan)
491 return NULL;
493 if (!len)
494 return NULL;
496 fsl_chan = to_fsl_chan(chan);
498 do {
500 /* Allocate the link descriptor from DMA pool */
501 new = fsl_dma_alloc_descriptor(fsl_chan);
502 if (!new) {
503 dev_err(fsl_chan->dev,
504 "No free memory for link descriptor\n");
505 goto fail;
507 #ifdef FSL_DMA_LD_DEBUG
508 dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
509 #endif
511 copy = min(len, (size_t)FSL_DMA_BCR_MAX_CNT);
513 set_desc_cnt(fsl_chan, &new->hw, copy);
514 set_desc_src(fsl_chan, &new->hw, dma_src);
515 set_desc_dest(fsl_chan, &new->hw, dma_dest);
517 if (!first)
518 first = new;
519 else
520 set_desc_next(fsl_chan, &prev->hw, new->async_tx.phys);
522 new->async_tx.cookie = 0;
523 async_tx_ack(&new->async_tx);
525 prev = new;
526 len -= copy;
527 dma_src += copy;
528 dma_dest += copy;
530 /* Insert the link descriptor to the LD ring */
531 list_add_tail(&new->node, &first->tx_list);
532 } while (len);
534 new->async_tx.flags = flags; /* client is in control of this ack */
535 new->async_tx.cookie = -EBUSY;
537 /* Set End-of-link to the last link descriptor of new list*/
538 set_ld_eol(fsl_chan, new);
540 return &first->async_tx;
542 fail:
543 if (!first)
544 return NULL;
546 list = &first->tx_list;
547 list_for_each_entry_safe_reverse(new, prev, list, node) {
548 list_del(&new->node);
549 dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
552 return NULL;
556 * fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
557 * @chan: DMA channel
558 * @sgl: scatterlist to transfer to/from
559 * @sg_len: number of entries in @scatterlist
560 * @direction: DMA direction
561 * @flags: DMAEngine flags
563 * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the
564 * DMA_SLAVE API, this gets the device-specific information from the
565 * chan->private variable.
567 static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg(
568 struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
569 enum dma_data_direction direction, unsigned long flags)
571 struct fsl_dma_chan *fsl_chan;
572 struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
573 struct fsl_dma_slave *slave;
574 struct list_head *tx_list;
575 size_t copy;
577 int i;
578 struct scatterlist *sg;
579 size_t sg_used;
580 size_t hw_used;
581 struct fsl_dma_hw_addr *hw;
582 dma_addr_t dma_dst, dma_src;
584 if (!chan)
585 return NULL;
587 if (!chan->private)
588 return NULL;
590 fsl_chan = to_fsl_chan(chan);
591 slave = chan->private;
593 if (list_empty(&slave->addresses))
594 return NULL;
596 hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry);
597 hw_used = 0;
600 * Build the hardware transaction to copy from the scatterlist to
601 * the hardware, or from the hardware to the scatterlist
603 * If you are copying from the hardware to the scatterlist and it
604 * takes two hardware entries to fill an entire page, then both
605 * hardware entries will be coalesced into the same page
607 * If you are copying from the scatterlist to the hardware and a
608 * single page can fill two hardware entries, then the data will
609 * be read out of the page into the first hardware entry, and so on
611 for_each_sg(sgl, sg, sg_len, i) {
612 sg_used = 0;
614 /* Loop until the entire scatterlist entry is used */
615 while (sg_used < sg_dma_len(sg)) {
618 * If we've used up the current hardware address/length
619 * pair, we need to load a new one
621 * This is done in a while loop so that descriptors with
622 * length == 0 will be skipped
624 while (hw_used >= hw->length) {
627 * If the current hardware entry is the last
628 * entry in the list, we're finished
630 if (list_is_last(&hw->entry, &slave->addresses))
631 goto finished;
633 /* Get the next hardware address/length pair */
634 hw = list_entry(hw->entry.next,
635 struct fsl_dma_hw_addr, entry);
636 hw_used = 0;
639 /* Allocate the link descriptor from DMA pool */
640 new = fsl_dma_alloc_descriptor(fsl_chan);
641 if (!new) {
642 dev_err(fsl_chan->dev, "No free memory for "
643 "link descriptor\n");
644 goto fail;
646 #ifdef FSL_DMA_LD_DEBUG
647 dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
648 #endif
651 * Calculate the maximum number of bytes to transfer,
652 * making sure it is less than the DMA controller limit
654 copy = min_t(size_t, sg_dma_len(sg) - sg_used,
655 hw->length - hw_used);
656 copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT);
659 * DMA_FROM_DEVICE
660 * from the hardware to the scatterlist
662 * DMA_TO_DEVICE
663 * from the scatterlist to the hardware
665 if (direction == DMA_FROM_DEVICE) {
666 dma_src = hw->address + hw_used;
667 dma_dst = sg_dma_address(sg) + sg_used;
668 } else {
669 dma_src = sg_dma_address(sg) + sg_used;
670 dma_dst = hw->address + hw_used;
673 /* Fill in the descriptor */
674 set_desc_cnt(fsl_chan, &new->hw, copy);
675 set_desc_src(fsl_chan, &new->hw, dma_src);
676 set_desc_dest(fsl_chan, &new->hw, dma_dst);
679 * If this is not the first descriptor, chain the
680 * current descriptor after the previous descriptor
682 if (!first) {
683 first = new;
684 } else {
685 set_desc_next(fsl_chan, &prev->hw,
686 new->async_tx.phys);
689 new->async_tx.cookie = 0;
690 async_tx_ack(&new->async_tx);
692 prev = new;
693 sg_used += copy;
694 hw_used += copy;
696 /* Insert the link descriptor into the LD ring */
697 list_add_tail(&new->node, &first->tx_list);
701 finished:
703 /* All of the hardware address/length pairs had length == 0 */
704 if (!first || !new)
705 return NULL;
707 new->async_tx.flags = flags;
708 new->async_tx.cookie = -EBUSY;
710 /* Set End-of-link to the last link descriptor of new list */
711 set_ld_eol(fsl_chan, new);
713 /* Enable extra controller features */
714 if (fsl_chan->set_src_loop_size)
715 fsl_chan->set_src_loop_size(fsl_chan, slave->src_loop_size);
717 if (fsl_chan->set_dest_loop_size)
718 fsl_chan->set_dest_loop_size(fsl_chan, slave->dst_loop_size);
720 if (fsl_chan->toggle_ext_start)
721 fsl_chan->toggle_ext_start(fsl_chan, slave->external_start);
723 if (fsl_chan->toggle_ext_pause)
724 fsl_chan->toggle_ext_pause(fsl_chan, slave->external_pause);
726 if (fsl_chan->set_request_count)
727 fsl_chan->set_request_count(fsl_chan, slave->request_count);
729 return &first->async_tx;
731 fail:
732 /* If first was not set, then we failed to allocate the very first
733 * descriptor, and we're done */
734 if (!first)
735 return NULL;
738 * First is set, so all of the descriptors we allocated have been added
739 * to first->tx_list, INCLUDING "first" itself. Therefore we
740 * must traverse the list backwards freeing each descriptor in turn
742 * We're re-using variables for the loop, oh well
744 tx_list = &first->tx_list;
745 list_for_each_entry_safe_reverse(new, prev, tx_list, node) {
746 list_del_init(&new->node);
747 dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
750 return NULL;
753 static void fsl_dma_device_terminate_all(struct dma_chan *chan)
755 struct fsl_dma_chan *fsl_chan;
756 struct fsl_desc_sw *desc, *tmp;
757 unsigned long flags;
759 if (!chan)
760 return;
762 fsl_chan = to_fsl_chan(chan);
764 /* Halt the DMA engine */
765 dma_halt(fsl_chan);
767 spin_lock_irqsave(&fsl_chan->desc_lock, flags);
769 /* Remove and free all of the descriptors in the LD queue */
770 list_for_each_entry_safe(desc, tmp, &fsl_chan->ld_queue, node) {
771 list_del(&desc->node);
772 dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
775 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
779 * fsl_dma_update_completed_cookie - Update the completed cookie.
780 * @fsl_chan : Freescale DMA channel
782 static void fsl_dma_update_completed_cookie(struct fsl_dma_chan *fsl_chan)
784 struct fsl_desc_sw *cur_desc, *desc;
785 dma_addr_t ld_phy;
787 ld_phy = get_cdar(fsl_chan) & FSL_DMA_NLDA_MASK;
789 if (ld_phy) {
790 cur_desc = NULL;
791 list_for_each_entry(desc, &fsl_chan->ld_queue, node)
792 if (desc->async_tx.phys == ld_phy) {
793 cur_desc = desc;
794 break;
797 if (cur_desc && cur_desc->async_tx.cookie) {
798 if (dma_is_idle(fsl_chan))
799 fsl_chan->completed_cookie =
800 cur_desc->async_tx.cookie;
801 else
802 fsl_chan->completed_cookie =
803 cur_desc->async_tx.cookie - 1;
809 * fsl_chan_ld_cleanup - Clean up link descriptors
810 * @fsl_chan : Freescale DMA channel
812 * This function clean up the ld_queue of DMA channel.
813 * If 'in_intr' is set, the function will move the link descriptor to
814 * the recycle list. Otherwise, free it directly.
816 static void fsl_chan_ld_cleanup(struct fsl_dma_chan *fsl_chan)
818 struct fsl_desc_sw *desc, *_desc;
819 unsigned long flags;
821 spin_lock_irqsave(&fsl_chan->desc_lock, flags);
823 dev_dbg(fsl_chan->dev, "chan completed_cookie = %d\n",
824 fsl_chan->completed_cookie);
825 list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) {
826 dma_async_tx_callback callback;
827 void *callback_param;
829 if (dma_async_is_complete(desc->async_tx.cookie,
830 fsl_chan->completed_cookie, fsl_chan->common.cookie)
831 == DMA_IN_PROGRESS)
832 break;
834 callback = desc->async_tx.callback;
835 callback_param = desc->async_tx.callback_param;
837 /* Remove from ld_queue list */
838 list_del(&desc->node);
840 dev_dbg(fsl_chan->dev, "link descriptor %p will be recycle.\n",
841 desc);
842 dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
844 /* Run the link descriptor callback function */
845 if (callback) {
846 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
847 dev_dbg(fsl_chan->dev, "link descriptor %p callback\n",
848 desc);
849 callback(callback_param);
850 spin_lock_irqsave(&fsl_chan->desc_lock, flags);
853 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
857 * fsl_chan_xfer_ld_queue - Transfer link descriptors in channel ld_queue.
858 * @fsl_chan : Freescale DMA channel
860 static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan)
862 struct list_head *ld_node;
863 dma_addr_t next_dest_addr;
864 unsigned long flags;
866 spin_lock_irqsave(&fsl_chan->desc_lock, flags);
868 if (!dma_is_idle(fsl_chan))
869 goto out_unlock;
871 dma_halt(fsl_chan);
873 /* If there are some link descriptors
874 * not transfered in queue. We need to start it.
877 /* Find the first un-transfer desciptor */
878 for (ld_node = fsl_chan->ld_queue.next;
879 (ld_node != &fsl_chan->ld_queue)
880 && (dma_async_is_complete(
881 to_fsl_desc(ld_node)->async_tx.cookie,
882 fsl_chan->completed_cookie,
883 fsl_chan->common.cookie) == DMA_SUCCESS);
884 ld_node = ld_node->next);
886 if (ld_node != &fsl_chan->ld_queue) {
887 /* Get the ld start address from ld_queue */
888 next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
889 dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n",
890 (unsigned long long)next_dest_addr);
891 set_cdar(fsl_chan, next_dest_addr);
892 dma_start(fsl_chan);
893 } else {
894 set_cdar(fsl_chan, 0);
895 set_ndar(fsl_chan, 0);
898 out_unlock:
899 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
903 * fsl_dma_memcpy_issue_pending - Issue the DMA start command
904 * @fsl_chan : Freescale DMA channel
906 static void fsl_dma_memcpy_issue_pending(struct dma_chan *chan)
908 struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
910 #ifdef FSL_DMA_LD_DEBUG
911 struct fsl_desc_sw *ld;
912 unsigned long flags;
914 spin_lock_irqsave(&fsl_chan->desc_lock, flags);
915 if (list_empty(&fsl_chan->ld_queue)) {
916 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
917 return;
920 dev_dbg(fsl_chan->dev, "--memcpy issue--\n");
921 list_for_each_entry(ld, &fsl_chan->ld_queue, node) {
922 int i;
923 dev_dbg(fsl_chan->dev, "Ch %d, LD %08x\n",
924 fsl_chan->id, ld->async_tx.phys);
925 for (i = 0; i < 8; i++)
926 dev_dbg(fsl_chan->dev, "LD offset %d: %08x\n",
927 i, *(((u32 *)&ld->hw) + i));
929 dev_dbg(fsl_chan->dev, "----------------\n");
930 spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
931 #endif
933 fsl_chan_xfer_ld_queue(fsl_chan);
937 * fsl_dma_is_complete - Determine the DMA status
938 * @fsl_chan : Freescale DMA channel
940 static enum dma_status fsl_dma_is_complete(struct dma_chan *chan,
941 dma_cookie_t cookie,
942 dma_cookie_t *done,
943 dma_cookie_t *used)
945 struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
946 dma_cookie_t last_used;
947 dma_cookie_t last_complete;
949 fsl_chan_ld_cleanup(fsl_chan);
951 last_used = chan->cookie;
952 last_complete = fsl_chan->completed_cookie;
954 if (done)
955 *done = last_complete;
957 if (used)
958 *used = last_used;
960 return dma_async_is_complete(cookie, last_complete, last_used);
963 static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data)
965 struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data;
966 u32 stat;
967 int update_cookie = 0;
968 int xfer_ld_q = 0;
970 stat = get_sr(fsl_chan);
971 dev_dbg(fsl_chan->dev, "event: channel %d, stat = 0x%x\n",
972 fsl_chan->id, stat);
973 set_sr(fsl_chan, stat); /* Clear the event register */
975 stat &= ~(FSL_DMA_SR_CB | FSL_DMA_SR_CH);
976 if (!stat)
977 return IRQ_NONE;
979 if (stat & FSL_DMA_SR_TE)
980 dev_err(fsl_chan->dev, "Transfer Error!\n");
982 /* Programming Error
983 * The DMA_INTERRUPT async_tx is a NULL transfer, which will
984 * triger a PE interrupt.
986 if (stat & FSL_DMA_SR_PE) {
987 dev_dbg(fsl_chan->dev, "event: Programming Error INT\n");
988 if (get_bcr(fsl_chan) == 0) {
989 /* BCR register is 0, this is a DMA_INTERRUPT async_tx.
990 * Now, update the completed cookie, and continue the
991 * next uncompleted transfer.
993 update_cookie = 1;
994 xfer_ld_q = 1;
996 stat &= ~FSL_DMA_SR_PE;
999 /* If the link descriptor segment transfer finishes,
1000 * we will recycle the used descriptor.
1002 if (stat & FSL_DMA_SR_EOSI) {
1003 dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n");
1004 dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n",
1005 (unsigned long long)get_cdar(fsl_chan),
1006 (unsigned long long)get_ndar(fsl_chan));
1007 stat &= ~FSL_DMA_SR_EOSI;
1008 update_cookie = 1;
1011 /* For MPC8349, EOCDI event need to update cookie
1012 * and start the next transfer if it exist.
1014 if (stat & FSL_DMA_SR_EOCDI) {
1015 dev_dbg(fsl_chan->dev, "event: End-of-Chain link INT\n");
1016 stat &= ~FSL_DMA_SR_EOCDI;
1017 update_cookie = 1;
1018 xfer_ld_q = 1;
1021 /* If it current transfer is the end-of-transfer,
1022 * we should clear the Channel Start bit for
1023 * prepare next transfer.
1025 if (stat & FSL_DMA_SR_EOLNI) {
1026 dev_dbg(fsl_chan->dev, "event: End-of-link INT\n");
1027 stat &= ~FSL_DMA_SR_EOLNI;
1028 xfer_ld_q = 1;
1031 if (update_cookie)
1032 fsl_dma_update_completed_cookie(fsl_chan);
1033 if (xfer_ld_q)
1034 fsl_chan_xfer_ld_queue(fsl_chan);
1035 if (stat)
1036 dev_dbg(fsl_chan->dev, "event: unhandled sr 0x%02x\n",
1037 stat);
1039 dev_dbg(fsl_chan->dev, "event: Exit\n");
1040 tasklet_schedule(&fsl_chan->tasklet);
1041 return IRQ_HANDLED;
1044 static irqreturn_t fsl_dma_do_interrupt(int irq, void *data)
1046 struct fsl_dma_device *fdev = (struct fsl_dma_device *)data;
1047 u32 gsr;
1048 int ch_nr;
1050 gsr = (fdev->feature & FSL_DMA_BIG_ENDIAN) ? in_be32(fdev->reg_base)
1051 : in_le32(fdev->reg_base);
1052 ch_nr = (32 - ffs(gsr)) / 8;
1054 return fdev->chan[ch_nr] ? fsl_dma_chan_do_interrupt(irq,
1055 fdev->chan[ch_nr]) : IRQ_NONE;
1058 static void dma_do_tasklet(unsigned long data)
1060 struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data;
1061 fsl_chan_ld_cleanup(fsl_chan);
1064 static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
1065 struct device_node *node, u32 feature, const char *compatible)
1067 struct fsl_dma_chan *new_fsl_chan;
1068 int err;
1070 /* alloc channel */
1071 new_fsl_chan = kzalloc(sizeof(struct fsl_dma_chan), GFP_KERNEL);
1072 if (!new_fsl_chan) {
1073 dev_err(fdev->dev, "No free memory for allocating "
1074 "dma channels!\n");
1075 return -ENOMEM;
1078 /* get dma channel register base */
1079 err = of_address_to_resource(node, 0, &new_fsl_chan->reg);
1080 if (err) {
1081 dev_err(fdev->dev, "Can't get %s property 'reg'\n",
1082 node->full_name);
1083 goto err_no_reg;
1086 new_fsl_chan->feature = feature;
1088 if (!fdev->feature)
1089 fdev->feature = new_fsl_chan->feature;
1091 /* If the DMA device's feature is different than its channels',
1092 * report the bug.
1094 WARN_ON(fdev->feature != new_fsl_chan->feature);
1096 new_fsl_chan->dev = fdev->dev;
1097 new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
1098 new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
1100 new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
1101 if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
1102 dev_err(fdev->dev, "There is no %d channel!\n",
1103 new_fsl_chan->id);
1104 err = -EINVAL;
1105 goto err_no_chan;
1107 fdev->chan[new_fsl_chan->id] = new_fsl_chan;
1108 tasklet_init(&new_fsl_chan->tasklet, dma_do_tasklet,
1109 (unsigned long)new_fsl_chan);
1111 /* Init the channel */
1112 dma_init(new_fsl_chan);
1114 /* Clear cdar registers */
1115 set_cdar(new_fsl_chan, 0);
1117 switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
1118 case FSL_DMA_IP_85XX:
1119 new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
1120 case FSL_DMA_IP_83XX:
1121 new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
1122 new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
1123 new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
1124 new_fsl_chan->set_request_count = fsl_chan_set_request_count;
1127 spin_lock_init(&new_fsl_chan->desc_lock);
1128 INIT_LIST_HEAD(&new_fsl_chan->ld_queue);
1130 new_fsl_chan->common.device = &fdev->common;
1132 /* Add the channel to DMA device channel list */
1133 list_add_tail(&new_fsl_chan->common.device_node,
1134 &fdev->common.channels);
1135 fdev->common.chancnt++;
1137 new_fsl_chan->irq = irq_of_parse_and_map(node, 0);
1138 if (new_fsl_chan->irq != NO_IRQ) {
1139 err = request_irq(new_fsl_chan->irq,
1140 &fsl_dma_chan_do_interrupt, IRQF_SHARED,
1141 "fsldma-channel", new_fsl_chan);
1142 if (err) {
1143 dev_err(fdev->dev, "DMA channel %s request_irq error "
1144 "with return %d\n", node->full_name, err);
1145 goto err_no_irq;
1149 dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
1150 compatible,
1151 new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq);
1153 return 0;
1155 err_no_irq:
1156 list_del(&new_fsl_chan->common.device_node);
1157 err_no_chan:
1158 iounmap(new_fsl_chan->reg_base);
1159 err_no_reg:
1160 kfree(new_fsl_chan);
1161 return err;
1164 static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan)
1166 if (fchan->irq != NO_IRQ)
1167 free_irq(fchan->irq, fchan);
1168 list_del(&fchan->common.device_node);
1169 iounmap(fchan->reg_base);
1170 kfree(fchan);
1173 static int __devinit of_fsl_dma_probe(struct of_device *dev,
1174 const struct of_device_id *match)
1176 int err;
1177 struct fsl_dma_device *fdev;
1178 struct device_node *child;
1180 fdev = kzalloc(sizeof(struct fsl_dma_device), GFP_KERNEL);
1181 if (!fdev) {
1182 dev_err(&dev->dev, "No enough memory for 'priv'\n");
1183 return -ENOMEM;
1185 fdev->dev = &dev->dev;
1186 INIT_LIST_HEAD(&fdev->common.channels);
1188 /* get DMA controller register base */
1189 err = of_address_to_resource(dev->node, 0, &fdev->reg);
1190 if (err) {
1191 dev_err(&dev->dev, "Can't get %s property 'reg'\n",
1192 dev->node->full_name);
1193 goto err_no_reg;
1196 dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
1197 "controller at 0x%llx...\n",
1198 match->compatible, (unsigned long long)fdev->reg.start);
1199 fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end
1200 - fdev->reg.start + 1);
1202 dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
1203 dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask);
1204 dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
1205 fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
1206 fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
1207 fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt;
1208 fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
1209 fdev->common.device_is_tx_complete = fsl_dma_is_complete;
1210 fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
1211 fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg;
1212 fdev->common.device_terminate_all = fsl_dma_device_terminate_all;
1213 fdev->common.dev = &dev->dev;
1215 fdev->irq = irq_of_parse_and_map(dev->node, 0);
1216 if (fdev->irq != NO_IRQ) {
1217 err = request_irq(fdev->irq, &fsl_dma_do_interrupt, IRQF_SHARED,
1218 "fsldma-device", fdev);
1219 if (err) {
1220 dev_err(&dev->dev, "DMA device request_irq error "
1221 "with return %d\n", err);
1222 goto err;
1226 dev_set_drvdata(&(dev->dev), fdev);
1228 /* We cannot use of_platform_bus_probe() because there is no
1229 * of_platform_bus_remove. Instead, we manually instantiate every DMA
1230 * channel object.
1232 for_each_child_of_node(dev->node, child) {
1233 if (of_device_is_compatible(child, "fsl,eloplus-dma-channel"))
1234 fsl_dma_chan_probe(fdev, child,
1235 FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN,
1236 "fsl,eloplus-dma-channel");
1237 if (of_device_is_compatible(child, "fsl,elo-dma-channel"))
1238 fsl_dma_chan_probe(fdev, child,
1239 FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN,
1240 "fsl,elo-dma-channel");
1243 dma_async_device_register(&fdev->common);
1244 return 0;
1246 err:
1247 iounmap(fdev->reg_base);
1248 err_no_reg:
1249 kfree(fdev);
1250 return err;
1253 static int of_fsl_dma_remove(struct of_device *of_dev)
1255 struct fsl_dma_device *fdev;
1256 unsigned int i;
1258 fdev = dev_get_drvdata(&of_dev->dev);
1260 dma_async_device_unregister(&fdev->common);
1262 for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++)
1263 if (fdev->chan[i])
1264 fsl_dma_chan_remove(fdev->chan[i]);
1266 if (fdev->irq != NO_IRQ)
1267 free_irq(fdev->irq, fdev);
1269 iounmap(fdev->reg_base);
1271 kfree(fdev);
1272 dev_set_drvdata(&of_dev->dev, NULL);
1274 return 0;
1277 static struct of_device_id of_fsl_dma_ids[] = {
1278 { .compatible = "fsl,eloplus-dma", },
1279 { .compatible = "fsl,elo-dma", },
1283 static struct of_platform_driver of_fsl_dma_driver = {
1284 .name = "fsl-elo-dma",
1285 .match_table = of_fsl_dma_ids,
1286 .probe = of_fsl_dma_probe,
1287 .remove = of_fsl_dma_remove,
1290 static __init int of_fsl_dma_init(void)
1292 int ret;
1294 pr_info("Freescale Elo / Elo Plus DMA driver\n");
1296 ret = of_register_platform_driver(&of_fsl_dma_driver);
1297 if (ret)
1298 pr_err("fsldma: failed to register platform driver\n");
1300 return ret;
1303 static void __exit of_fsl_dma_exit(void)
1305 of_unregister_platform_driver(&of_fsl_dma_driver);
1308 subsys_initcall(of_fsl_dma_init);
1309 module_exit(of_fsl_dma_exit);
1311 MODULE_DESCRIPTION("Freescale Elo / Elo Plus DMA driver");
1312 MODULE_LICENSE("GPL");